               maxHttpHeaderSize="8192"
               maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
               enableLookups="false" redirectPort="8443" acceptCount="100"
               connectionTimeout="20000" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
     to 0 -->
	
	<!-- Note : To use gzip compression you could set the following properties :
	
			   compression="on" 
			   compressionMinSize="2048" 
			   noCompressionUserAgents="gozilla, traviata" 
			   compressableMimeType="text/html,text/xml"
	-->

    <!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector port="8443" maxHttpHeaderSize="8192"
               maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
               enableLookups="false" disableUploadTimeout="true"
               acceptCount="100" scheme="https" secure="true"
               clientAuth="false" sslProtocol="TLS" />
    -->

    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009" 
               enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />

    <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
    <!-- See proxy documentation for more information about using this. -->
    <!--
    <Connector port="8082" 
               maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
               enableLookups="false" acceptCount="100" connectionTimeout="20000"
               proxyPort="80" disableUploadTimeout="true" />
    -->

    <!-- An Engine represents the entry point (within Catalina) that processes
         every request.  The Engine implementation for Tomcat stand alone
         analyzes the HTTP headers included with the request, and passes them
         on to the appropriate Host (virtual host). -->

    <!-- You should set jvmRoute to support load-balancing via AJP ie :
    <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">         
    --> 
         
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Catalina" defaultHost="localhost">

      <!-- The request dumper valve dumps useful debugging information about
           the request headers and cookies that were received, and the response
           headers and cookies that were sent, for all requests received by
           this instance of Tomcat.  If you care only about requests to a
           particular virtual host, or a particular application, nest this
           element inside the corresponding <Host> or <Context> entry instead.

           For a similar mechanism that is portable to all Servlet 2.4
           containers, check out the "RequestDumperFilter" Filter in the
           example application (the source for this filter may be found in
           "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").

           Request dumping is disabled by default.  Uncomment the following
           element to enable it. -->
      <!--
      <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
      -->

      <!-- Because this Realm is here, an instance will be shared globally -->

      <!-- This Realm uses the UserDatabase configured in the global JNDI
           resources under the key "UserDatabase".  Any edits
           that are performed against this UserDatabase are immediately
           available for use by the Realm.  -->
      <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
             resourceName="UserDatabase"/>

      <!-- Comment out the old realm but leave here for now in case we
           need to go back quickly -->
      <!--
      <Realm className="org.apache.catalina.realm.MemoryRealm" />
      -->

      <!-- Replace the above Realm with one of the following to get a Realm
           stored in a database and accessed via JDBC -->

      <!--
      <Realm  className="org.apache.catalina.realm.JDBCRealm"
             driverName="org.gjt.mm.mysql.Driver"
          connectionURL="jdbc:mysql://localhost/authority"
         connectionName="test" connectionPassword="test"
              userTable="users" userNameCol="user_name" userCredCol="user_pass"
          userRoleTable="user_roles" roleNameCol="role_name" />
      -->

      <!--
      <Realm  className="org.apache.catalina.realm.JDBCRealm"
             driverName="oracle.jdbc.driver.OracleDriver"
          connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
         connectionName="scott" connectionPassword="tiger"
              userTable="users" userNameCol="user_name" userCredCol="user_pass"
          userRoleTable="user_roles" roleNameCol="role_name" />
      -->

      <!--
      <Realm  className="org.apache.catalina.realm.JDBCRealm"
             driverName="sun.jdbc.odbc.JdbcOdbcDriver"
          connectionURL="jdbc:odbc:CATALINA"
              userTable="users" userNameCol="user_name" userCredCol="user_pass"
          userRoleTable="user_roles" roleNameCol="role_name" />
      -->

      <!-- Define the default virtual host
           Note: XML Schema validation will not work with Xerces 2.2.
       -->
      <Host name="localhost" appBase="webapps"
       unpackWARs="true" autoDeploy="true"
       xmlValidation="false" xmlNamespaceAware="false">

        <!-- Defines a cluster for this node,
             By defining this element, means that every manager will be changed.
             So when running a cluster, only make sure that you have webapps in there
             that need to be clustered and remove the other ones.
             A cluster has the following parameters:

             className = the fully qualified name of the cluster class

             name = a descriptive name for your cluster, can be anything

             mcastAddr = the multicast address, has to be the same for all the nodes

             mcastPort = the multicast port, has to be the same for all the nodes
             
             mcastBindAddr = bind the multicast socket to a specific address
             
             mcastTTL = the multicast TTL if you want to limit your broadcast
             
             mcastSoTimeout = the multicast readtimeout 

             mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat

             mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received

             tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes 

             tcpListenAddress = the listen address (bind address) for TCP cluster request on this host, 
                                in case of multiple ethernet cards.
                                auto means that address becomes
                                InetAddress.getLocalHost().getHostAddress()

             tcpListenPort = the tcp listen port

             tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
                                  has a wakup bug in java.nio. Set to 0 for no timeout

             printToScreen = true means that managers will also print to std.out

             expireSessionsOnShutdown = true means that 

             useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
                            false means to replicate the session after each request.
                            false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
                            <%
                            HashMap map = (HashMap)session.getAttribute("map");
                            map.put("key","value");
                            %>
             replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
                               * Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
                               * Synchronous means that the thread that executes the request, is also the
                               thread the replicates the data to the other nodes, and will not return until all
                               nodes have received the information.
                               * Asynchronous means that there is a specific 'sender' thread for each cluster node,
                               so the request thread will queue the replication request into a "smart" queue,
                               and then return to the client.
                               The "smart" queue is a queue where when a session is added to the queue, and the same session
                               already exists in the queue from a previous request, that session will be replaced
                               in the queue instead of replicating two requests. This almost never happens, unless there is a 
                               large network delay.
        -->             
        <!--
            When configuring for clustering, you also add in a valve to catch all the requests
            coming in, at the end of the request, the session may or may not be replicated.
            A session is replicated if and only if all the conditions are met:
            1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
            2. a session exists (has been created)
            3. the request is not trapped by the "filter" attribute

            The filter attribute is to filter out requests that could not modify the session,
            hence we don't replicate the session after the end of this request.
            The filter is negative, ie, anything you put in the filter, you mean to filter out,
            ie, no replication will be done on requests that match one of the filters.
            The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.

            filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
            ending with .gif and .js are intercepted.
            
            The deployer element can be used to deploy apps cluster wide.
            Currently the deployment only deploys/undeploys to working members in the cluster
            so no WARs are copied upons startup of a broken node.
            The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
            When a new war file is added the war gets deployed to the local instance,
            and then deployed to the other instances in the cluster.
            When a war file is deleted from the watchDir the war is undeployed locally 
            and cluster wide
        -->
        
        <!--
        <Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
                 managerClassName="org.apache.catalina.cluster.session.DeltaManager"
                 expireSessionsOnShutdown="false"
                 useDirtyFlag="true"
                 notifyListenersOnReplication="true">

            <Membership 
                className="org.apache.catalina.cluster.mcast.McastService"
                mcastAddr="228.0.0.4"
                mcastPort="45564"
                mcastFrequency="500"
                mcastDropTime="3000"/>

            <Receiver 
                className="org.apache.catalina.cluster.tcp.ReplicationListener"
                tcpListenAddress="auto"
                tcpListenPort="4001"
                tcpSelectorTimeout="100"
                tcpThreadCount="6"/>

            <Sender
                className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
                replicationMode="pooled"
                ackTimeout="15000"/>

            <Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
                   filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
                   
            <Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
                      tempDir="/tmp/war-temp/"
                      deployDir="/tmp/war-deploy/"
                      watchDir="/tmp/war-listen/"
                      watchEnabled="false"/>
        </Cluster>
        -->        


        <!-- Normally, users must authenticate themselves to each web app
             individually.  Uncomment the following entry if you would like
             a user to be authenticated the first time they encounter a
             resource protected by a security constraint, and then have that
             user identity maintained across *all* web applications contained
             in this virtual host. -->
        <!--
        <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
        -->

        <!-- Access log processes all requests for this virtual host.  By
             default, log files are created in the "logs" directory relative to
             $CATALINA_HOME.  If you wish, you can specify a different
             directory with the "directory" attribute.  Specify either a relative
             (to $CATALINA_HOME) or absolute path to the desired directory.
        -->
        <!--
        <Valve className="org.apache.catalina.valves.AccessLogValve"
                 directory="logs"  prefix="localhost_access_log." suffix=".txt"
                 pattern="common" resolveHosts="false"/>
        -->

        <!-- Access log processes all requests for this virtual host.  By
             default, log files are created in the "logs" directory relative to
             $CATALINA_HOME.  If you wish, you can specify a different
             directory with the "directory" attribute.  Specify either a relative
             (to $CATALINA_HOME) or absolute path to the desired directory.
             This access log implementation is optimized for maximum performance,
             but is hardcoded to support only the "common" and "combined" patterns.
        -->
        <!--
        <Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
                 directory="logs"  prefix="localhost_access_log." suffix=".txt"
                 pattern="common" resolveHosts="false"/>
        -->

      </Host>

    </Engine>

  </Service>

</Server>