<!--
  Licensed to the Apache Software Foundation (ASF) under one or more
  contributor license agreements.  See the NOTICE file distributed with
  this work for additional information regarding copyright ownership.
  The ASF licenses this file to You under the Apache License, Version 2.0
  (the "License"); you may not use this file except in compliance with
  the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
-->
<html>
<head>
<title>Package Documentation for org.apache.commons.digester Package</title>
</head>
<body bgcolor="white">
The Digester package provides for rules-based processing of arbitrary
XML documents.
<br><br>
<a name="doc.Description"></a>
<div align="center">
<a href="#doc.Depend">[Dependencies]</a>
<a href="#doc.Intro">[Introduction]</a>
<a href="#doc.Properties">[Configuration Properties]</a>
<a href="#doc.Stack">[The Object Stack]</a>
<a href="#doc.Patterns">[Element Matching Patterns]</a>
<a href="#doc.Rules">[Processing Rules]</a>
<a href="#doc.Logging">[Logging]</a>
<a href="#doc.Usage">[Usage Example]</a>
<a href="#doc.Namespace">[Namespace Aware Parsing]</a>
<a href="#doc.Pluggable">[Pluggable Rules Processing]</a>
<a href="#doc.RuleSets">[Encapsulated Rule Sets]</a>
<a href="#doc.NamedStacks">[Using Named Stacks For Inter-Rule Communication]</a>
<a href="#doc.RegisteringDTDs">[Registering DTDs]</a>
<a href="#doc.troubleshooting">[Troubleshooting]</a>
<a href="#doc.FAQ">[FAQ]</a>
<a href="#doc.Limits">[Known Limitations]</a>
</div>

<a name="doc.Depend"></a>
<h3>External Dependencies</h3>

<ul>
  <li>An XML parser conforming to
    <a href="http://java.sun.com/products/xml">JAXP
    </a>, version 1.1 or later (the first one to support SAX 2.0)
  </li>
  <li>
    <a href="http://jakarta.apache.org/builds/jakarta-commons/release/commons-beanutils">
Beanutils Package (Jakarta Commons)</a>, version 1.5 or later
  </li>
  <li>
    <a href="http://jakarta.apache.org/builds/jakarta-commons/release/commons-collections">
Collections Package (Jakarta Commons)</a>, version 2.1 or later
  </li>
  <li>
    <a href="http://jakarta.apache.org/builds/jakarta-commons/release/commons-logging">
Commons Logging Package (Jakarta Commons)</a>, version 1.0.2 or later
  </li>
</ul>

<a name="doc.Intro"></a>
<h3>Introduction</h3>

<p>In many application environments that deal with XML-formatted data, it is
useful to be able to process an XML document in an "event driven" manner,
where particular Java objects are created (or methods of existing objects
are invoked) when particular patterns of nested XML elements have been
recognized.  Developers familiar with the Simple API for XML Parsing (SAX)
approach to processing XML documents will recognize that the Digester provides
a higher level, more developer-friendly interface to SAX events, because most
of the details of navigating the XML element hierarchy are hidden -- allowing
the developer to focus on the processing to be performed.</p>

<p>In order to use a Digester, the following basic steps are required:</p>
<ul>
<li>Create a new instance of the
    <code>org.apache.commons.digester.Digester</code> class.  Previously
    created Digester instances may be safely reused, as long as you have
    completed any previously requested parse, and you do not try to utilize
    a particular Digester instance from more than one thread at a time.</li>
<li>Set any desired <a href="#doc.Properties">configuration properties</a>
    that will customize the operation of the Digester when you next initiate
    a parse operation.</li>
<li>Optionally, push any desired initial object(s) onto the Digester's
    <a href="#doc.Stack">object stack</a>.</li>
<li>Register all of the <a href="#doc.Patterns">element matching patterns</a>
    for which you wish to have <a href="#doc.Rules">processing rules</a>
    fired when this pattern is recognized in an input document.  You may
    register as many rules as you like for any particular pattern.  If there
    is more than one rule for a given pattern, the rules will be executed in
    the order that they were listed.</li>
<li>Call the <code>digester.parse()</code> method, passing a reference to the
    XML document to be parsed in one of a variety of forms.  See the
    <a href="Digester.html#parse(java.io.File)">Digester.parse()</a>
    documentation for details.  Note that you will need to be prepared to
    catch any <code>IOException</code> or <code>SAXException</code> that is
    thrown by the parser, or any runtime expression that is thrown by one of
    the processing rules.</li>
</ul>

<p>For example code, see <a href="#doc.Usage"> the usage 
examples</a>, and <a href="#doc.FAQ.Examples"> the FAQ </a>. </p>

<a name="doc.Properties"></a>
<h3>Digester Configuration Properties</h3>

<p>A <code>org.apache.commons.digester.Digester</code> instance contains several
configuration properties that can be used to customize its operation.  These
properties <strong>must</strong> be configured before you call one of the
<code>parse()</code> variants, in order for them to take effect on that
parse.</p>

<blockquote>
  <table border="1">
    <tr>
      <th width="15%">Property</th>
      <th width="85%">Description</th>
    </tr>
    <tr>
      <td align="center">classLoader</td>
      <td>You can optionally specify the class loader that will be used to
          load classes when required by the <code>ObjectCreateRule</code>
          and <code>FactoryCreateRule</code> rules.  If not specified,
          application classes will be loaded from the thread's context
          class loader (if the <code>useContextClassLoader</code> property
          is set to <code>true</code>) or the same class loader that was
          used to load the <code>Digester</code> class itself.</td>
    </tr>
    <tr>
      <td align="center">errorHandler</td>
      <td>You can optionally specify a SAX <code>ErrorHandler</code> that
          is notified when parsing errors occur.  By default, any parsing
          errors that are encountered are logged, but Digester will continue
          processing as well.</td>
    </tr>
    <tr>
      <td align="center">namespaceAware</td>
      <td>A boolean that is set to <code>true</code> to perform parsing in a
          manner that is aware of XML namespaces.  Among other things, this
          setting affects how elements are matched to processing rules.  See
          <a href="#doc.Namespace">Namespace Aware Parsing</a> for more
          information.</td>
    </tr>
    <tr>
      <td align="center">ruleNamespaceURI</td>
      <td>The public URI of the namespace for which all subsequently added
          rules are associated, or <code>null</code> for adding rules that
          are not associated with any namespace.  See
          <a href="#doc.Namespace">Namespace Aware Parsing</a> for more
          information.</td>
    </tr>
    <tr>
      <td align="center">rules</td>
      <td>The <code>Rules</code> component that actually performs matching of
          <code>Rule</code> instances against the current element nesting
          pattern is pluggable.  By default, Digester includes a
          <code>Rules</code> implementation that behaves as described in this
          document.  See
          <a href="#doc.Pluggable">Pluggable Rules Processing</a> for
          more information.</td>
    </tr>
    <tr>
      <td align="center">useContextClassLoader</code>
      <td>A boolean that is set to <code>true</code> if you want application
          classes required by <code>FactoryCreateRule</code> and
          <code>ObjectCreateRule</code> to be loaded from the context class
          loader of the current thread.  By default, classes will be loaded
          from the class loader that loaded this <code>Digester</code> class.
          <strong>NOTE</strong> - This property is ignored if you set a
          value for the <code>classLoader</code> property; that class loader
          will be used unconditionally.</td>
    </tr>
    <tr>
      <td align="center">validating</td>
      <td>A boolean that is set to <code>true</code> if you wish to validate
          the XML document against a Document Type Definition (DTD) that is
          specified in its <code>DOCTYPE</code> declaration.  The default
          value of <code>false</code> requests a parse that only detects
          "well formed" XML documents, rather than "valid" ones.</td>
    </tr>
  </table>
</blockquote>

<p>In addition to the scalar properties defined above, you can also register
a local copy of a Document Type Definition (DTD) that is referenced in a
<code>DOCTYPE</code> declaration.  Such a registration tells the XML parser
that, whenever it encounters a <code>DOCTYPE</code> declaration with the
specified public identifier, it should utilize the actual DTD content at the
registered system identifier (a URL), rather than the one in the
<code>DOCTYPE</code> declaration.</p>

<p>For example, the Struts framework controller servlet uses the following
registration in order to tell Struts to use a local copy of the DTD for the
Struts configuration file.  This allows usage of Struts in environments that
are not connected to the Internet, and speeds up processing even at Internet
connected sites (because it avoids the need to go across the network).</p>

<pre>
    URL url = new URL("/org/apache/struts/resources/struts-config_1_0.dtd");
    digester.register
      ("-//Apache Software Foundation//DTD Struts Configuration 1.0//EN",
       url.toString());
</pre>

<p>As a side note, the system identifier used in this example is the path
that would be passed to <code>java.lang.ClassLoader.getResource()</code>
or <code>java.lang.ClassLoader.getResourceAsStream()</code>.  The actual DTD
resource is loaded through the same class loader that loads all of the Struts
classes -- typically from the <code>struts.jar</code> file.</p>

<a name="doc.Stack"></a>
<h3>The Object Stack</h3>

<p>One very common use of <code>org.apache.commons.digester.Digester</code>
technology is to dynamically construct a tree of Java objects, whose internal
organization, as well as the details of property settings on these objects,
are configured based on the contents of the XML document.  In fact, the
primary reason that the Digester package was created (it was originally part
of Struts, and then moved to the Commons project because it was recognized
as being generally useful) was to facilitate the
way that the Struts controller servlet configures itself based on the contents
of your application's <code>struts-config.xml</code> file.</p>

<p>To facilitate this usage, the Digester exposes a stack that can be
manipulated by processing rules that are fired when element matching patterns
are satisfied.  The usual stack-related operations are made available,
including the following:</p>
<ul>
<li><a href="Digester.html#clear()">clear()</a> - Clear the current contents
    of the object stack.</li>
<li><a href="Digester.html#peek()">peek()</a> - Return a reference to the top
    object on the stack, without removing it.</li>
<li><a href="Digester.html#pop()">pop()</a> - Remove the top object from the
    stack and return it.</li>
<li><a href="Digester.html#push(java.lang.Object)">push()</a> - Push a new
    object onto the top of the stack.</li>
</ul>

<p>A typical design pattern, then, is to fire a rule that creates a new object
and pushes it on the stack when the beginning of a particular XML element is
encountered. The object will remain there while the nested content of this
element is processed, and it will be popped off when the end of the element
is encountered.  As we will see, the standard "object create" processing rule
supports exactly this functionalility in a very convenient way.</p>

<p>Several potential issues with this design pattern are addressed by other
features of the Digester functionality:</p>
<ul>
<li><em>How do I relate the objects being created to each other?</em> - The
    Digester supports standard processing rules that pass the top object on
    the stack as an argument to a named method on the next-to-top object on
    the stack (or vice versa).  This rule makes it easy to establish
    parent-child relationships between these objects.  One-to-one and
    one-to-many relationships are both easy to construct.</li>
<li><em>How do I retain a reference to the first object that was created?</em>
    As you review the description of what the "object create" processing rule
    does, it would appear that the first object you create (i.e. the object
    created by the outermost XML element you process) will disappear from the
    stack by the time that XML parsing is completed, because the end of the
    element would have been encountered.  However, Digester will maintain a
    reference to the very first object ever pushed onto the object stack,
    and will return it to you
    as the return value from the <code>parse()</code> call.  Alternatively,
    you can push a reference to some application object onto the stack before
    calling <code>parse()</code>, and arrange that a parent-child relationship
    be created (by appropriate processing rules) between this manually pushed
    object and the ones that are dynamically created.  In this way,
    the pushed object will retain a reference to the dynamically created objects
    (and therefore all of their children), and will be returned to you after
    the parse finishes as well.</li>
</ul>

<a name="doc.Patterns"></a>
<h3>Element Matching Patterns</h3>

<p>A primary feature of the <code>org.apache.commons.digester.Digester</code>
parser is that the Digester automatically navigates the element hierarchy of
the XML document you are parsing for you, without requiring any developer
attention to this process.  Instead, you focus on deciding what functions you
would like to have performed whenver a certain arrangement of nested elements
is encountered in the XML document being parsed.  The mechanism for specifying
such arrangements are called <em>element matching patterns</em>.

<p>A very simple element matching pattern is a simple string like "a".  This
pattern is matched whenever an <code>&lt;a&gt;</code> top-level element is
encountered in the XML document, no matter how many times it occurs.  Note that
nested <code>&lt;a&gt;</code> elements will <strong>not</strong> match this
pattern -- we will describe means to support this kind of matching later.</li>

<p>The next step up in matching pattern complexity is "a/b".  This pattern will
be matched when a <code>&lt;b&gt;</code> element is found nested inside a
top-level <code>&lt;a&gt;</code> element.  Again, this match can occur as many
times as desired, depending on the content of the XML document being parsed.
You can use multiple slashes to define a hierarchy of any desired depth that
will be matched appropriately.</p>

<p>For example, assume you have registered processing rules that match patterns
"a", "a/b", and "a/b/c".  For an input XML document with the following
contents, the indicated patterns will be matched when the corresponding element
is parsed:</p>
<pre>
  &lt;a&gt;         -- Matches pattern "a"
    &lt;b&gt;       -- Matches pattern "a/b"
      &lt;c/&gt;    -- Matches pattern "a/b/c"
      &lt;c/&gt;    -- Matches pattern "a/b/c"
    &lt;/b&gt;
    &lt;b&gt;       -- Matches pattern "a/b"
      &lt;c/&gt;    -- Matches pattern "a/b/c"
      &lt;c/&gt;    -- Matches pattern "a/b/c"
      &lt;c/&gt;    -- Matches pattern "a/b/c"
    &lt;/b&gt;
  &lt;/a&gt;
</pre>

<p>It is also possible to match a particular XML element, no matter how it is
nested (or not nested) in the XML document, by using the "*" wildcard character
in your matching pattern strings.  For example, an element matching pattern
of "*/a" will match an <code>&lt;a&gt;</code> element at any nesting position
within the document.</p>

<p>It is quite possible that, when a particular XML element is being parsed,
the pattern for more than one registered processing rule will be matched
 either because you registered more than one processing rule with the same
matching pattern, or because one more more exact pattern matches and wildcard
pattern matches are satisfied by the same element.</p>

<p>When this occurs, the corresponding processing rules will all be fired in order. 
<code>begin</code> (and <code>body</code>) method calls are executed in the 
order that the <code>Rules</code> where initially registered with the 
<code>Digester</code>, whilst <code>end</code> method calls are execute in 
reverse order. In other words - the order is first in, last out.</p>

<a name="doc.Rules"></a>
<h3>Processing Rules</h3>

<p>The <a href="#doc.Patterns">previous section</a> documented how you identify
<strong>when</strong> you wish to have certain actions take place.  The purpose
of processing rules is to define <strong>what</strong> should happen when the
patterns are matched.</p>

<p>Formally, a processing rule is a Java class that subclasses the
<a href="Rule.html">org.apache.commons.digester.Rule</a> interface.  Each Rule
implements one or more of the following event methods that are called at
well-defined times when the matching patterns corresponding to this rule
trigger it:</p>
<ul>
<li><a href="Rule.html#begin(org.xml.sax.AttributeList)">begin()</a> -
    Called when the beginning of the matched XML element is encountered.  A
    data structure containing all of the attributes corresponding to this
    element are passed as well.</li>
<li><a href="Rule.html#body(java.lang.String)">body()</a> -
    Called when nested content (that is not itself XML elements) of the
    matched element is encountered.  Any leading or trailing whitespace will
    have been removed as part of the parsing process.</li>
<li><a href="Rule.html#end()">end()</a> - Called when the ending of the matched
    XML element is encountered.  If nested XML elements that matched other
    processing rules was included in the body of this element, the appropriate
    processing rules for the matched rules will have already been completed
    before this method is called.</li>
<li><a href="Rule.html#finish()">finish()</a> - Called when the parse has
    been completed, to give each rule a chance to clean up any temporary data
    they might have created and cached.</li>
</ul>

<p>As you are configuring your digester, you can call the
<code>addRule()</code> method to register a specific element matching pattern,
along with an instance of a <code>Rule</code> class that will have its event
handling methods called at the appropriate times, as described above.  This
mechanism allows you to create <code>Rule</code> implementation classes
dynamically, to implement any desired application specific functionality.</p>

<p>In addition, a set of processing rule implementation classes are provided,
which deal with many common programming scenarios.  These classes include the
following:</p>
<ul>
<li><a href="ObjectCreateRule.html">ObjectCreateRule</a> - When the
    <code>begin()</code> method is called, this rule instantiates a new
    instance of a specified Java class, and pushes it on the stack.  The
    class name to be used is defaulted according to a parameter passed to
    this rule's constructor, but can optionally be overridden by a classname
    passed via the specified attribute to the XML element being processed.
    When the <code>end()</code> method is called, the top object on the stack
    (presumably, the one we added in the <code>begin()</code> method) will
    be popped, and any reference to it (within the Digester) will be
    discarded.</li>
<li><a href="FactoryCreateRule.html">FactoryCreateRule</a> - A variation of
    <code>ObjectCreateRule</code> that is useful when the Java class with
    which you wish to create an object instance does not have a no-arguments
    constructor, or where you wish to perform other setup processing before
    the object is handed over to the Digester.</li>
<li><a href="SetPropertiesRule.html">SetPropertiesRule</a> - When the
    <code>begin()</code> method is called, the digester uses the standard
    Java Reflection API to identify any JavaBeans property setter methods
    (on the object at the top of the digester's stack)
    who have property names that match the attributes specified on this XML
    element, and then call them individually, passing the corresponding
    attribute values. These natural mappings can be overridden. This allows
    (for example) a <code>class</code> attribute to be mapped correctly.
    It is recommended that this feature should not be overused - in most cases,
    it's better to use the standard <code>BeanInfo</code> mechanism.
    A very common idiom is to define an object create
    rule, followed by a set properties rule, with the same element matching
    pattern.  This causes the creation of a new Java object, followed by
    "configuration" of that object's properties based on the attributes
    of the same XML element that created this object.</li>
<li><a href="SetPropertyRule.html">SetPropertyRule</a> - When the
    <code>begin()</code> method is called, the digester calls a specified
    property setter (where the property itself is named by an attribute)
    with a specified value (where the value is named by another attribute),
    on the object at the top of the digester's stack.
    This is useful when your XML file conforms to a particular DTD, and
    you wish to configure a particular property that does not have a
    corresponding attribute in the DTD.</li>
<li><a href="SetNextRule.html">SetNextRule</a> - When the
    <code>end()</code> method is called, the digester analyzes the
    next-to-top element on the stack, looking for a property setter method
    for a specified property.  It then calls this method, passing the object
    at the top of the stack as an argument.  This rule is commonly used to
    establish one-to-many relationships between the two objects, with the
    method name commonly being something like "addChild".</li>
<li><a href="SetTopRule.html">SetTopRule</a> - When the
    <code>end()</code> method is called, the digester analyzes the
    top element on the stack, looking for a property setter method for a
    specified property.  It then calls this method, passing the next-to-top
    object on the stack as an argument.  This rule would be used as an
    alternative to a SetNextRule, with a typical method name "setParent",
    if the API supported by your object classes prefers this approach.</li>
<li><a href="CallMethodRule.html">CallMethodRule</a> - This rule sets up a
    method call to a named method of the top object on the digester's stack,
    which will actually take place when the <code>end()</code> method is
    called.  You configure this rule by specifying the name of the method
    to be called, the number of arguments it takes, and (optionally) the
    Java class name(s) defining the type(s) of the method's arguments.
    The actual parameter values, if any, will typically be accumulated from
    the body content of nested elements within the element that triggered
    this rule, using the CallParamRule discussed next.</li>
<li><a href="CallParamRule.html">CallParamRule</a> - This rule identifies
    the source of a particular numbered (zero-relative) parameter for a
    CallMethodRule within which we are nested.  You can specify that the
    parameter value be taken from a particular named attribute, or from the
    nested body content of this element.</li>
<li><a href="NodeCreateRule.html">NodeCreateRule</a> - A specialized rule
    that converts part of the tree into a <code>DOM Node</code> and then
    pushes it onto the stack.</li>
</ul>

<p>You can create instances of the standard <code>Rule</code> classes and
register them by calling <code>digester.addRule()</code>, as described above.
However, because their usage is so common, shorthand registration methods are
defined for each of the standard rules, directly on the <code>Digester</code>
class.  For example, the following code sequence:</p>
<pre>
    Rule rule = new SetNextRule(digester, "addChild",
                                "com.mycompany.mypackage.MyChildClass");
    digester.addRule("a/b/c", rule);
</pre>
<p>can be replaced by:</p>
<pre>
    digester.addSetNext("a/b/c", "addChild",
                        "com.mycompany.mypackage.MyChildClass");
</pre>

<a name="doc.Logging"></a>
<h3>Logging</h3>

<p>Logging is a vital tool for debugging Digester rulesets. Digester can log
copious amounts of debugging information. So, you need to know how logging
works before you start using Digester seriously.</p>

<p>Digester uses
<a href="http://jakarta.apache.org/commons/logging.html">Jakarta Commons
Logging</a>.  This component is not really a logging framework - rather
an extensible, configurable bridge. It can be configured to swallow all log 
messages, to provide very basic logging by itself or to pass logging messages
on to more sophisticated logging frameworks. Commons-Logging comes with
connectors for many popular logging frameworks. Consult the commons-logging
documentation for more information.</p>

<p>Two main logs are used by Digester:</p>
<ul>
<li>SAX-related messages are logged to
    <strong><code>org.apache.commons.digester.Digester.sax</code></strong>.
    This log gives information about the basic SAX events received by
    Digester.</li>
<li><strong><code>org.apache.commons.digester.Digester</code></strong> is used
    for everything else. You'll probably want to have this log turned up during
    debugging but turned down during production due to the high message
    volume.</li>
</ul>

<p>Complete documentation of how to configure Commons-Logging can be found
in the Commons Logging package documentation.  However, as a simple example,
let's assume that you want to use the <code>SimpleLog</code> implementation
that is included in Commons-Logging, and set up Digester to log events from
the <code>Digester</code> logger at the DEBUG level, while you want to log
events from the <code>Digester.log</code> logger at the INFO level.  You can
accomplish this by creating a <code>commons-logging.properties</code> file
in your classpath (or setting corresponding system properties on the command
line that starts your application) with the following contents:</p>
<pre>
  org.apache.commons.logging.Log=org.apache.commons.logging.impl.SimpleLog
  org.apache.commons.logging.simplelog.log.org.apache.commons.digester.Digester=debug
  org.apache.commons.logging.simplelog.log.org.apache.commons.digester.Digester.sax=info
</pre>

<a name="doc.Usage"></a>
<h3>Usage Examples</h3>


<h5>Creating a Simple Object Tree</h5>

<p>Let's assume that you have two simple JavaBeans, <code>Foo</code> and
<code>Bar</code>, with the following method signatures:</p>
<pre>
  package mypackage;
  public class Foo {
    public void addBar(Bar bar);
    public Bar findBar(int id);
    public Iterator getBars();
    public String getName();
    public void setName(String name);
  }

  public mypackage;
  public class Bar {
    public int getId();
    public void setId(int id);
    public String getTitle();
    public void setTitle(String title);
  }
</pre>

<p>and you wish to use Digester to parse the following XML document:</p>

<pre>
  &lt;foo name="The Parent"&gt;
    &lt;bar id="123" title="The First Child"/&gt;
    &lt;bar id="456" title="The Second Child"/&gt;
  &lt;/foo&gt;
</pre>

<p>A simple approach will be to use the following Digester in the following way
to set up the parsing rules, and then process an input file containing this
document:</p>

<pre>
  Digester digester = new Digester();
  digester.setValidating(false);
  digester.addObjectCreate("foo", "mypackage.Foo");
  digester.addSetProperties("foo");
  digester.addObjectCreate("foo/bar", "mypackage.Bar");
  digester.addSetProperties("foo/bar");
  digester.addSetNext("foo/bar", "addBar", "mypackage.Bar");
  Foo foo = (Foo) digester.parse();
</pre>

<p>In order, these rules do the following tasks:</p>
<ol>
<li>When the outermost <code>&lt;foo&gt;</code> element is encountered,
    create a new instance of <code>mypackage.Foo</code> and push it
    on to the object stack.  At the end of the <code>&lt;foo&gt;</code>
    element, this object will be popped off of the stack.</li>
<li>Cause properties of the top object on the stack (i.e. the <code>Foo</code>
    object that was just created and pushed) to be set based on the values
    of the attributes of this XML element.</li>
<li>When a nested <code>&lt;bar&gt;</code> element is encountered,
    create a new instance of <code>mypackage.Bar</code> and push it
    on to the object stack.  At the end of the <code>&lt;bar&gt;</code>
    element, this object will be popped off of the stack (i.e. after the
    remaining rules matching <code>foo/bar</code> are processed).</li>
<li>Cause properties of the top object on the stack (i.e. the <code>Bar</code>
    object that was just created and pushed) to be set based on the values
    of the attributes of this XML element.  Note that type conversions
    are automatically performed (such as String to int for the <code>id</code>
    property), for all converters registered with the <code>ConvertUtils</code>
    class from <code>commons-beanutils</code> package.</li>
<li>Cause the <code>addBar</code> method of the next-to-top element on the
    object stack (which is why this is called the "set <em>next</em>" rule)
    to be called, passing the element that is on the top of the stack, which
    must be of type <code>mypackage.Bar</code>.  This is the rule that causes
    the parent/child relationship to be created.</li>
</ol>

<p>Once the parse is completed, the first object that was ever pushed on to the
stack (the <code>Foo</code> object in this case) is returned to you.  It will
have had its properties set, and all of its child <code>Bar</code> objects
created for you.</p>


<h5>Processing A Struts Configuration File</h5>

<p>As stated earlier, the primary reason that the
<code>Digester</code> package was created is because the
Struts controller servlet itself needed a robust, flexible, easy to extend
mechanism for processing the contents of the <code>struts-config.xml</code>
configuration that describes nearly every aspect of a Struts-based application.
Because of this, the controller servlet contains a comprehensive, real world,
example of how the Digester can be employed for this type of a use case.
See the <code>initDigester()</code> method of class
<code>org.apache.struts.action.ActionServlet</code> for the code that creates
and configures the Digester to be used, and the <code>initMapping()</code>
method for where the parsing actually takes place.</p>

<p>(Struts binary and source distributions can be acquired at
<a href="http://jakarta.apache.org/struts/">http://jakarta.apache.org/struts/</a>.)</p>

<p>The following discussion highlights a few of the matching patterns and
processing rules that are configured, to illustrate the use of some of the
Digester features.  First, let's look at how the Digester instance is
created and initialized:</p>
<pre>
    Digester digester = new Digester();
    digester.push(this); // Push controller servlet onto the stack
    digester.setValidating(true);
</pre>

<p>We see that a new Digester instance is created, and is configured to use
a validating parser.  Validation will occur against the struts-config_1_0.dtd
DTD that is included with Struts (as discussed earlier).  In order to provide
a means of tracking the configured objects, the controller servlet instance
itself will be added to the digester's stack.</p>

<pre>
    digester.addObjectCreate("struts-config/global-forwards/forward",
                             forwardClass, "className");
    digester.addSetProperties("struts-config/global-forwards/forward");
    digester.addSetNext("struts-config/global-forwards/forward",
                        "addForward",
                        "org.apache.struts.action.ActionForward");
    digester.addSetProperty
      ("struts-config/global-forwards/forward/set-property",
       "property", "value");
</pre>

<p>The rules created by these lines are used to process the global forward
declarations.  When a <code>&lt;forward&gt;</code> element is encountered,
the following actions take place:</p>
<ul>
<li>A new object instance is created -- the <code>ActionForward</code>
    instance that will represent this definition.  The Java class name
    defaults to that specified as an initialization parameter (which
    we have stored in the String variable <code>forwardClass</code>), but can
    be overridden by using the "className" attribute (if it is present in the
    XML element we are currently parsing).  The new <code>ActionForward</code>
    instance is pushed onto the stack.</li>
<li>The properties of the <code>ActionForward</code> instance (at the top of
    the stack) are configured based on the attributes of the
    <code>&lt;forward&gt;</code> element.</li>
<li>Nested occurrences of the <code>&lt;set-property&gt;</code> element
    cause calls to additional property setter methods to occur.  This is
    required only if you have provided a custom implementation of the
    <code>ActionForward</code> class with additional properties that are
    not included in the DTD.</li>
<li>The <code>addForward()</code> method of the next-to-top object on
    the stack (i.e. the controller servlet itself) will be called, passing
    the object at the top of the stack (i.e. the <code>ActionForward</code>
    instance) as an argument.  This causes the global forward to be
    registered, and as a result of this it will be remembered even after
    the stack is popped.</li>
<li>At the end of the <code>&lt;forward&gt;</code> element, the top element
    (i.e. the <code>ActionForward</code> instance) will be popped off the
    stack.</li>
</ul>

<p>Later on, the digester is actually executed as follows:</p>
<pre>
    InputStream input =
      getServletContext().getResourceAsStream(config);
    ...
    try {
        digester.parse(input);
        input.close();
    } catch (SAXException e) {
        ... deal with the problem ...
    }
</pre>

<p>As a result of the call to <code>parse()</code>, all of the configuration
information that was defined in the <code>struts-config.xml</code> file is
now represented as collections of objects cached within the Struts controller
servlet, as well as being exposed as servlet context attributes.</p>


<h5>Parsing Body Text In XML Files</h5>

<p>The Digester module also allows you to process the nested body text in an
XML file, not just the elements and attributes that are encountered.  The
following example is based on an assumed need to parse the web application
deployment descriptor (<code>/WEB-INF/web.xml</code>) for the current web
application, and record the configuration information for a particular
servlet.  To record this information, assume the existence of a bean class
with the following method signatures (among others):</p>
<pre>
  package com.mycompany;
  public class ServletBean {
    public void setServletName(String servletName);
    public void setServletClass(String servletClass);
    public void addInitParam(String name, String value);
  }
</pre>

<p>We are going to process the <code>web.xml</code> file that declares the
controller servlet in a typical Struts-based application (abridged for
brevity in this example):</p>
<pre>
  &lt;web-app&gt;
    ...
    &lt;servlet&gt;
      &lt;servlet-name&gt;action&lt;/servlet-name&gt;
      &lt;servlet-class&gt;org.apache.struts.action.ActionServlet&lt;servlet-class&gt;
      &lt;init-param&gt;
        &lt;param-name&gt;application&lt;/param-name&gt;
        &lt;param-value&gt;org.apache.struts.example.ApplicationResources&lt;param-value&gt;
      &lt;/init-param&gt;
      &lt;init-param&gt;
        &lt;param-name&gt;config&lt;/param-name&gt;
        &lt;param-value&gt;/WEB-INF/struts-config.xml&lt;param-value&gt;
      &lt;/init-param&gt;
    &lt;/servlet&gt;
    ...
  &lt;/web-app&gt;
</pre>

<p>Next, lets define some Digester processing rules for this input file:</p>
<pre>
  digester.addObjectCreate("web-app/servlet",
                           "com.mycompany.ServletBean");
  digester.addCallMethod("web-app/servlet/servlet-name", "setServletName", 0);
  digester.addCallMethod("web-app/servlet/servlet-class",
                         "setServletClass", 0);
  digester.addCallMethod("web-app/servlet/init-param",
                         "addInitParam", 2);
  digester.addCallParam("web-app/servlet/init-param/param-name", 0);
  digester.addCallParam("web-app/servlet/init-param/param-value", 1);
</pre>

<p>Now, as elements are parsed, the following processing occurs:</p>
<ul>
<li><em>&lt;servlet&gt;</em> - A new <code>com.mycompany.ServletBean</code>
    object is created, and pushed on to the object stack.</li>
<li><em>&lt;servlet-name&gt;</em> - The <code>setServletName()</code> method
    of the top object on the stack (our <code>ServletBean</code>) is called,
    passing the body content of this element as a single parameter.</li>
<li><em>&lt;servlet-class&gt;</em> - The <code>setServletClass()</code> method
    of the top object on the stack (our <code>ServletBean</code>) is called,
    passing the body content of this element as a single parameter.</li>
<li><em>&lt;init-param&gt;</em> - A call to the <code>addInitParam</code>
    method of the top object on the stack (our <code>ServletBean</code>) is
    set up, but it is <strong>not</strong> called yet.  The call will be
    expecting two <code>String</code> parameters, which must be set up by
    subsequent call parameter rules.</li>
<li><em>&lt;param-name&gt;</em> - The body content of this element is assigned
    as the first (zero-relative) argument to the call we are setting up.</li>
<li><em>&lt;param-value&gt;</em> - The body content of this element is assigned
    as the second (zero-relative) argument to the call we are setting up.</li>
<li><em>&lt;/init-param&gt;</em> - The call to <code>addInitParam()</code>
    that we have set up is now executed, which will cause a new name-value
    combination to be recorded in our bean.</li>
<li><em>&lt;init-param&gt;</em> - The same set of processing rules are fired
    again, causing a second call to <code>addInitParam()</code> with the
    second parameter's name and value.</li>
<li><em>&lt;/servlet&gt;</em> - The element on the top of the object stack
    (which should be the <code>ServletBean</code> we pushed earlier) is
    popped off the object stack.</li>
</ul>


<a name="doc.Namespace"></a>
<h3>Namespace Aware Parsing</h3>

<p>For digesting XML documents that do not use XML namespaces, the default
behavior of <code>Digester</code>, as described above, is generally sufficient.
However, if the document you are processing uses namespaces, it is often
convenient to have sets of <code>Rule</code> instances that are <em>only</em>
matched on elements that use the prefix of a particular namespace.  This
approach, for example, makes it possible to deal with element names that are 
the same in different namespaces, but where you want to perform different 
processing for each namespace. </p>

<p>Digester does not provide full support for namespaces, but does provide
sufficient to accomplish most tasks. Enabling digester's namespace support
is done by following these steps:</p>

<ol>
<li>Tell <code>Digester</code> that you will be doing namespace
    aware parsing, by adding this statement in your initalization
    of the Digester's properties:
    <pre>
    digester.setNamespaceAware(true);
    </pre></li>
<li>Declare the public namespace URI of the namespace with which
    following rules will be associated.  Note that you do <em>not</em>
    make any assumptions about the prefix - the XML document author
    is free to pick whatever prefix they want:
    <pre>
    digester.setRuleNamespaceURI("http://www.mycompany.com/MyNamespace");
    </pre></li>
<li>Add the rules that correspond to this namespace, in the usual way,
    by calling methods like <code>addObjectCreate()</code> or
    <code>addSetProperties()</code>.  In the matching patterns you specify,
    use only the <em>local name</em> portion of the elements (i.e. the
    part after the prefix and associated colon (":") character:
    <pre>
    digester.addObjectCreate("foo/bar", "com.mycompany.MyFoo");
    digester.addSetProperties("foo/bar");
    </pre></li>
<li>Repeat the previous two steps for each additional public namespace URI
    that should be recognized on this <code>Digester</code> run.</li>
</ol>

<p>Now, consider that you might wish to digest the following document, using
the rules that were set up in the steps above:</p>
<pre>
&lt;m:foo
   xmlns:m="http://www.mycompany.com/MyNamespace"
   xmlns:y="http://www.yourcompany.com/YourNamespace"&gt;

  &lt;m:bar name="My Name" value="My Value"/&gt;

  &lt;y:bar id="123" product="Product Description"/&gt;L

&lt;/x:foo&gt;
</pre>

<p>Note that your object create and set properties rules will be fired for the
<em>first</em> occurrence of the <code>bar</code> element, but not the
<em>second</em> one.  This is because we declared that our rules only matched
for the particular namespace we are interested in.  Any elements in the
document that are associated with other namespaces (or no namespaces at all)
will not be processed.  In this way, you can easily create rules that digest
only the portions of a compound document that they understand, without placing
any restrictions on what other content is present in the document.</p>

<p>You might also want to look at <a href="#doc.RuleSets">Encapsulated
Rule Sets</a> if you wish to reuse a particular set of rules, associated
with a particular namespace, in more than one application context.</p>

<h4>Using Namespace Prefixes In Pattern Matching</h4>

<p>Using rules with namespaces is very useful when you have orthogonal rulesets. 
One ruleset applies to a namespace and is independent of other rulesets applying
to other namespaces. However, if your rule logic requires mixed namespaces, then 
matching namespace prefix patterns might be a better strategy.</p>

<p>When you set the <code>NamespaceAware</code> property to false, digester uses
the qualified element name (which includes the namespace prefix) rather than the
local name as the patten component for the element. This means that your pattern
matches can include namespace prefixes as well as element names. So, rather than
create namespace-aware rules, create pattern matches including the namespace
prefixes.</p>

<p>For example, (with <code>NamespaceAware</code> false), the pattern <code>
'foo:bar'</code> will match a top level element named <code>'bar'</code> in the 
namespace with (local) prefix <code>'foo'</code>.</p>

<h4>Limitations of Digester Namespace support</h4>
<p>Digester does not provide general "xpath-compliant" matching;
only the namespace attached to the <i>last</i> element in the match path
is involved in the matching process. Namespaces attached to parent
elements are ignored for matching purposes.</p>


<a name="doc.Pluggable"></a>
<h3>Pluggable Rules Processing</h3>

<p>By default, <code>Digester</code> selects the rules that match a particular
pattern of nested elements as described under
<a href="#doc.Patterns">Element Matching Patterns</a>.  If you prefer to use
different selection policies, however, you can create your own implementation
of the <a href="Rules.html">org.apache.commons.digester.Rules</a> interface,
or subclass the corresponding convenience base class
<a href="RulesBase.html">org.apache.commons.digester.RulesBase</a>.
Your implementation of the <code>match()</code> method will be called when the
processing for a particular element is started or ended, and you must return
a <code>List</code> of the rules that are relevant for the current nesting
pattern.  The order of the rules you return <strong>is</strong> significant,
and should match the order in which rules were initally added.</p>

<p>Your policy for rule selection should generally be sensitive to whether
<a href="#doc.Namespace">Namespace Aware Parsing</a> is taking place.  In
general, if <code>namespaceAware</code> is true, you should select only rules
that:</p>
<ul>
<li>Are registered for the public namespace URI that corresponds to the
    prefix being used on this element.</li>
<li>Match on the "local name" portion of the element (so that the document
    creator can use any prefix that they like).</li>
</ul>

<h4>ExtendedBaseRules</h4>
<p><a href="ExtendedBaseRules.html">ExtendedBaseRules</a>,
adds some additional expression syntax for pattern matching
to the default mechanism, but it also executes more slowly.  See the
JavaDocs for more details on the new pattern matching syntax, and suggestions
on when this implementation should be used.  To use it, simply do the
following as part of your Digester initialization:</p>

<pre>
  Digester digester = ...
  ...
  digester.setRules(new ExtendedBaseRules());
  ...
</pre>

<h4>RegexRules</h4>
<p><a href="RegexRules.html">RegexRules</a> is an advanced <code>Rules</code> 
implementation which does not build on the default pattern matching rules.
It uses a pluggable <a href="RegexMatcher.html">RegexMatcher</a> implementation to test 
if a path matches the pattern for a Rule. All matching rules are returned 
(note that this behaviour differs from longest matching rule of the default
 pattern matching rules). See the Java Docs for more details.
</p>
<p>
Example usage:
</p>

<pre>
  Digester digester = ...
  ...
  digester.setRules(new RegexRules(new SimpleRegexMatcher()));
  ...
</pre>
<h5>RegexMatchers</h5>
<p>
<code>Digester</code> ships only with one <code>RegexMatcher</code>
implementation: <a href='SimpleRegexMatcher.html'>SimpleRegexMatcher</a>.
This implementation is unsophisticated and lacks many good features
lacking in more power Regex libraries. There are some good reasons
why this approach was adopted. The first is that <code>SimpleRegexMatcher</code>
is simple, it is easy to write and runs quickly. The second has to do with 
the way that <code>RegexRules</code> is intended to be used.
</p>
<p>
There are many good regex libraries available. (For example 
<a href='http://jakarta.apache.org/oro/index.html'>Jakarta ORO</a>,
<a href='http://jakarta.apache.org/regexp/index.html'>Jakarta Regex</a>,
<a href='http://www.cacas.org/java/gnu/regexp/'>GNU Regex</a> and
<a href='http://java.sun.com/j2se/1.4.2/docs/api/java/util/regex/package-summary.html'>
Java 1.4 Regex</a>)
Not only do different people have different personal tastes when it comes to
regular expression matching but these products all offer different functionality
and different strengths.
</p>
<p>
The pluggable <code>RegexMatcher</code> is a thin bridge
designed to adapt other Regex systems. This allows any Regex library the user
desires to be plugged in and used just by creating one class.
<code>Digester</code> does not (currently) ship with bridges to the major
regex (to allow the dependencies required by <code>Digester</code>
to be kept to a minimum).
</p>

<h4>WithDefaultsRulesWrapper</h4>
<p>
<a href="WithDefaultsRulesWrapper.html"> WithDefaultsRulesWrapper</a> allows 
default <code>Rule</code> instances to be added to any existing 
<code>Rules</code> implementation. These default <code>Rule</code> instances 
will be returned for any match for which the wrapped implementation does not 
return any matches. 
</p>
<p>
For example,
<pre>
    Rule alpha;
    ...
    WithDefaultsRulesWrapper rules = new WithDefaultsRulesWrapper(new BaseRules());
    rules.addDefault(alpha);
    ...
    digester.setRules(rules);
    ...
</pre>
when a pattern does not match any other rule, then rule alpha will be called.
</p>
<p>
<code>WithDefaultsRulesWrapper</code> follows the <em>Decorator</em> pattern.
</p>

<a name="doc.RuleSets"></a>
<h3>Encapsulated Rule Sets</h3>

<p>All of the examples above have described a scenario where the rules to be
processed are registered with a <code>Digester</code> instance immediately
after it is created.  However, this approach makes it difficult to reuse the
same set of rules in more than one application environment.  Ideally, one
could package a set of rules into a single class, which could be easily
loaded and registered with a <code>Digester</code> instance in one easy step.
</p>

<p>The <a href="RuleSet.html">RuleSet</a> interface (and the convenience base
class <a href="RuleSetBase.html">RuleSetBase</a>) make it possible to do this.
In addition, the rule instances registered with a particular
<code>RuleSet</code> can optionally be associated with a particular namespace,
as described under <a href="#doc.Namespace">Namespace Aware Processing</a>.</p>

<p>An example of creating a <code>RuleSet</code> might be something like this:
</p>
<pre>
public class MyRuleSet extends RuleSetBase {

  public MyRuleSet() {
    this("");
  }

  public MyRuleSet(String prefix) {
    super();
    this.prefix = prefix;
    this.namespaceURI = "http://www.mycompany.com/MyNamespace";
  }

  protected String prefix = null;

  public void addRuleInstances(Digester digester) {
    digester.addObjectCreate(prefix + "foo/bar",
      "com.mycompany.MyFoo");
    digester.addSetProperties(prefix + "foo/bar");
  }

}
</pre>

<p>You might use this <code>RuleSet</code> as follow to initialize a
<code>Digester</code> instance:</p>
<pre>
  Digester digester = new Digester();
  ... configure Digester properties ...
  digester.addRuleSet(new MyRuleSet("baz/"));
</pre>

<p>A couple of interesting notes about this approach:</p>
<ul>
<li>The application that is using these rules does not need to know anything
    about the fact that the <code>RuleSet</code> being used is associated
    with a particular namespace URI.  That knowledge is emedded inside the
    <code>RuleSet</code> class itself.</li>
<li>If desired, you could make a set of rules work for more than one
    namespace URI by providing constructors on the <code>RuleSet</code> to
    allow this to be specified dynamically.</li>
<li>The <code>MyRuleSet</code> example above illustrates another technique
    that increases reusability -- you can specify (as an argument to the
    constructor) the leading portion of the matching pattern to be used.
    In this way, you can construct a <code>Digester</code> that recognizes
    the same set of nested elements at different nesting levels within an
    XML document.</li>
</ul>
<a name="doc.NamedStacks"></a>
<h3>Using Named Stacks For Inter-Rule Communication</h3>
<p>
<code>Digester</code> is based on <code>Rule</code> instances working together 
to process xml. For anything other than the most trival processing, 
communication between <code>Rule</code> instances is necessary. Since <code>Rule</code>
instances are processed in sequence, this usually means storing an Object 
somewhere where later instances can retrieve it.
</p>
<p>
<code>Digester</code> is based on SAX. The most natural data structure to use with 
SAX based xml processing is the stack. This allows more powerful processes to be
specified more simply since the pushing and popping of objects can mimic the 
nested structure of the xml. 
</p>
<p>
<code>Digester</code> uses two basic stacks: one for the main beans and the other 
for parameters for method calls. These are inadequate for complex processing 
where many different <code>Rule</code> instances need to communicate through 
different channels.
</p>
<p>
In this case, it is recommended that named stacks are used. In addition to the
two basic stacks, <code>Digester</code> allows rules to use an unlimited number
of other stacks referred two by an identifying string (the name). (That's where
the term <em>named stack</em> comes from.) These stacks are 
accessed through calls to:
</p>
<ul>
    <li><a href='Digester.html#push(java.lang.String, java.lang.Object)'>
        void push(String stackName, Object value)</a></li>
    <li><a href='Digester.html#pop(java.lang.String)'>
        Object pop(String stackName)</a></li>
    <li><a href='Digester.html#peek(java.lang.String)'>
        Object peek(String stackName)</a></li>
</ul>
<p>
<strong>Note:</strong> all stack names beginning with <code>org.apache.commons.digester</code>
are reserved for future use by the <code>Digester</code> component. It is also recommended
that users choose stack names perfixed by the name of their own domain to avoid conflicts
with other <code>Rule</code> implementations.
</p>
<a name="doc.RegisteringDTDs"></a>
<h3>Registering DTDs</h3>

<h4>Brief (But Still Too Long) Introduction To System and Public Identifiers</h4>
<p>A definition for an external entity comes in one of two forms:
</p>
<ol>
    <li><code>SYSTEM <em>system-identifier</em></code></li>
    <li><code>PUBLIC <em>public-identifier</em> <em>system-identifier</em></code></li>
</ol>
<p>
The <code><em>system-identifier</em></code> is an URI from which the resource can be obtained
(either directly or indirectly). Many valid URIs may identify the same resource.
The <code><em>public-identifier</em></code> is an additional free identifier which may be used
(by the parser) to locate the resource. 
</p>
<p>
In practice, the weakness with a <code><em>system-identifier</em></code> is that most parsers
will attempt to interprete this URI as an URL, try to download the resource directly
from the URL and stop the parsing if this download fails. So, this means that 
almost always the URI will have to be an URL from which the declaration
can be downloaded.
</p>
<p>
URLs may be local or remote but if the URL is chosen to be local, it is likely only
to function correctly on a small number of machines (which are configured precisely
to allow the xml to be parsed). This is usually unsatisfactory and so a universally
accessable URL is preferred. This usually means an internet URL.
</p>
<p>
To recap, in practice the <code><em>system-identifier</em></code> will (most likely) be an 
internet URL. Unfortunately downloading from an internet URL is not only slow
but unreliable (since successfully downloading a document from the internet 
relies on the client being connect to the internet and the server being
able to satisfy the request).
</p>
<p>
The <code><em>public-identifier</em></code> is a freely defined name but (in practice) it is 
strongly recommended that a unique, readable and open format is used (for reasons
that should become clear later). A Formal Public Identifier (FPI) is a very
common choice. This public identifier is often used to provide a unique and location
independent key which can be used to subsistute local resources for remote ones 
(hint: this is why ;).
</p>
<p>
By using the second (<code>PUBLIC</code>) form combined with some form of local
catalog (which matches <code><em>public-identifiers</em></code> to local resources) and where
the <code><em>public-identifier</em></code> is a unique name and the <code><em>system-identifier</em></code> 
is an internet URL, the practical disadvantages of specifying just a 
<code><em>system-identifier</em></code> can be avoided. Those external entities which have been 
store locally (on the machine parsing the document) can be identified and used.
Only when no local copy exists is it necessary to download the document
from the internet URL. This naming scheme is recommended when using <code>Digester</code>.
</p>

<h4>External Entity Resolution Using Digester</h4>
<p>
SAX factors out the resolution of external entities into an <code>EntityResolver</code>.
<code>Digester</code> supports the use of custom <code>EntityResolver</code> 
but ships with a simple internal implementation. This implementation allows local URLs
to be easily associated with <code><em>public-identifiers</em></code>. 
</p>
<p>For example:</p>
<code><pre>
    digester.register("-//Example Dot Com //DTD Sample Example//EN", "assets/sample.dtd");
</pre></code>
<p>
will make digester return the relative file path <code>assets/sample.dtd</code> 
whenever an external entity with public id 
<code>-//Example Dot Com //DTD Sample Example//EN</code> is needed.
</p>
<p><strong>Note:</strong> This is a simple (but useful) implementation. 
Greater sophistication requires a custom <code>EntityResolver</code>.</p>
    
<a name="doc.troubleshooting"></a>
<h3>Troubleshooting</h3>
<h4>Debugging Exceptions</h4>
<p>
<code>Digester</code> is based on <a href='http://www.saxproject.org'>SAX</a>.
Digestion throws two kinds of <code>Exception</code>:
</p>
<ul>
    <li><code>java.io.IOException</code></li>
    <li><code>org.xml.sax.SAXException</code></li>
</ul>
<p>
The first is rarely thrown and indicates the kind of fundemental IO exception
that developers know all about. The second is thrown by SAX parsers when the processing
of the XML cannot be completed. So, to diagnose the cause a certain familiarity with 
the way that SAX error handling works is very useful. 
</p>
<h5>Diagnosing SAX Exceptions</h5>
<p>
This is a short, potted guide to SAX error handling strategies. It's not intended as a
proper guide to error handling in SAX.
</p>
<p>
When a SAX parser encounters a problem with the xml (well, ok - sometime after it 
encounters a problem) it will throw a 
<a href='http://www.saxproject.org/apidoc/org/xml/sax/SAXParseException.html'>
SAXParseException</a>. This is a subclass of <code>SAXException</code> and contains
a bit of extra information about what exactly when wrong - and more importantly,
where it went wrong. If you catch an exception of this sort, you can be sure that
the problem is with the XML and not <code>Digester</code> or your rules.
It is usually a good idea to catch this exception and log the extra information
to help with diagnosing the reason for the failure.
</p>
<p>
General <a href='http://www.saxproject.org/apidoc/org/xml/sax/SAXException.html'>
SAXException</a> instances may wrap a causal exception. When exceptions are
throw by <code>Digester</code> each of these will be wrapped into a 
<code>SAXException</code> and rethrown. So, catch these and examine the wrapped
exception to diagnose what went wrong.
</p>
<a name="doc.FAQ"></a>
<h3>Frequently Asked Questions</h3>
<p><ul>
<li><strong>Why do I get warnings when using a JAXP 1.1 parser?</strong>
<p>If you're using a JAXP 1.1 parser, you might see the following warning (in your log):
<code><pre>
[WARN] Digester - -Error: JAXP SAXParser property not recognized: http://java.sun.com/xml/jaxp/properties/schemaLanguage
</pre></code>
This property is needed for JAXP 1.2 (XML Schema support) as required
for the Servlet Spec. 2.4 but is not recognized by JAXP 1.1 parsers.
This warning is harmless.</p>
<p>
</li>
<li><strong>Why Doesn't Schema Validation Work With Parser XXX Out Of The Box?</strong>
<p>
Schema location and language settings are often need for validation using schemas.
Unfortunately, there isn't a single standard approach to how these properties are
configured on a parser.
Digester tries to guess the parser being used and configure it appropriately
but it's not infallible.
You might need to grab an instance, configure it and pass it to Digester.
</p>
<p>
If you want to support more than one parser in a portable manner, 
then you'll probably want to take a look at the 
<code>org.apache.commons.digester.parsers</code> package
and add a new class to support the particular parser that's causing problems.
</p>
</li>
<li><strong>Help! 
I'm Validating Against Schema But Digester Ignores Errors!</strong>
<p>
Digester is based on <a href='http://www.saxproject.org'>SAX</a>. The convention for
SAX parsers is that all errors are reported (to any registered 
<code>ErrorHandler</code>) but processing continues. Digester (by default) 
registers its own <code>ErrorHandler</code> implementation. This logs details 
but does not stop the processing (following the usual convention for SAX 
based processors). 
</p>
<p>
This means that the errors reported by the validation of the schema will appear in the
Digester logs but the processing will continue. To change this behaviour, call
<code>digester.setErrorHandler</code> with a more suitable implementation.
</p>

<li><strong>Where Can I Find Example Code?</strong>
<a name="doc.FAQ.Examples">
<p>Digester ships with a sample application: a mapping for the <em>Rich Site 
Summary</em> format used by many newsfeeds. Download the source distribution 
to see how it works.</p>
<p>Digester also ships with a set of examples demonstrating most of the 
features described in this document. See the "src/examples" subdirectory 
of the source distribution.</p>
</li>
<li><strong>When Are You Going To Support <em>Rich Site Summary</em> Version x.y.z?</strong>
<p>
The <em>Rich Site Summary</em> application is intended to be a sample application. 
It works but we have no plans to add support for other versions of the format.
</p>
<p>
We would consider donations of standard digester applications but it's unlikely that
these would ever be shipped with the base digester distribution.
If you want to discuss this, please post to <a href='http://jakarta.apache.org/site/mail.html'>
common-dev mailing list</a>
</p>
</li>
</ul>
<a name="doc.Limits"></a>
<h3>Known Limitations</h3>
<h4>Accessing Public Methods In A Default Access Superclass</h4>
<p>There is an issue when invoking public methods contained in a default access superclass.
Reflection locates these methods fine and correctly assigns them as public.
However, an <code>IllegalAccessException</code> is thrown if the method is invoked.</p>

<p><code>MethodUtils</code> contains a workaround for this situation. 
It will attempt to call <code>setAccessible</code> on this method.
If this call succeeds, then the method can be invoked as normal.
This call will only succeed when the application has sufficient security privilages. 
If this call fails then a warning will be logged and the method may fail.</p>

<p><code>Digester</code> uses <code>MethodUtils</code> and so there may be an issue accessing methods
of this kind from a high security environment. If you think that you might be experiencing this 
problem, please ask on the mailing list.</p>
</body>
</html>