| /* |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| */ |
| module thrift_test_client; |
| |
| import std.conv; |
| import std.datetime; |
| import std.exception : enforce; |
| import std.getopt; |
| import std.stdio; |
| import std.string; |
| import std.traits; |
| import thrift.base; |
| import thrift.codegen.client; |
| import thrift.protocol.base; |
| import thrift.protocol.binary; |
| import thrift.protocol.compact; |
| import thrift.protocol.json; |
| import thrift.transport.base; |
| import thrift.transport.buffered; |
| import thrift.transport.framed; |
| import thrift.transport.http; |
| import thrift.transport.zlib; |
| import thrift.transport.socket; |
| import thrift.transport.ssl; |
| import thrift.util.hashset; |
| |
| import thrift_test_common; |
| import thrift.test.ThriftTest; |
| import thrift.test.ThriftTest_types; |
| |
| enum TransportType { |
| buffered, |
| framed, |
| http, |
| zlib, |
| raw |
| } |
| |
| TProtocol createProtocol(T)(T trans, ProtocolType type) { |
| final switch (type) { |
| case ProtocolType.binary: |
| return tBinaryProtocol(trans); |
| case ProtocolType.compact: |
| return tCompactProtocol(trans); |
| case ProtocolType.json: |
| return tJsonProtocol(trans); |
| } |
| } |
| |
| void main(string[] args) { |
| string host = "localhost"; |
| ushort port = 9090; |
| uint numTests = 1; |
| bool ssl; |
| ProtocolType protocolType; |
| TransportType transportType; |
| bool zlib; |
| bool trace; |
| |
| getopt(args, |
| "numTests|n", &numTests, |
| "protocol", &protocolType, |
| "ssl", &ssl, |
| "transport", &transportType, |
| "zlib", &zlib, |
| "trace", &trace, |
| "port", &port, |
| "host", (string _, string value) { |
| auto parts = split(value, ":"); |
| if (parts.length > 1) { |
| // IPv6 addresses can contain colons, so take the last part for the |
| // port. |
| host = join(parts[0 .. $ - 1], ":"); |
| port = to!ushort(parts[$ - 1]); |
| } else { |
| host = value; |
| } |
| } |
| ); |
| port = to!ushort(port); |
| |
| TSocket socket; |
| if (ssl) { |
| auto sslContext = new TSSLContext(); |
| sslContext.ciphers = "ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH"; |
| sslContext.authenticate = true; |
| sslContext.loadTrustedCertificates("../../../test/keys/CA.pem"); |
| socket = new TSSLSocket(sslContext, host, port); |
| } else { |
| socket = new TSocket(host, port); |
| } |
| |
| TTransport transport; |
| final switch (transportType) { |
| case TransportType.buffered: |
| transport = new TBufferedTransport(socket); |
| break; |
| case TransportType.framed: |
| transport = new TFramedTransport(socket); |
| break; |
| case TransportType.http: |
| transport = new TClientHttpTransport(socket, host, "/service"); |
| break; |
| case TransportType.zlib: |
| transport = new TZlibTransport(socket); |
| break; |
| case TransportType.raw: |
| transport = socket; |
| break; |
| } |
| if (zlib && transportType != TransportType.zlib) { |
| transport = new TZlibTransport(socket); |
| } |
| TProtocol protocol = createProtocol(transport, protocolType); |
| |
| auto client = tClient!ThriftTest(protocol); |
| |
| ulong time_min; |
| ulong time_max; |
| ulong time_tot; |
| |
| StopWatch sw; |
| foreach(test; 0 .. numTests) { |
| sw.start(); |
| |
| protocol.transport.open(); |
| |
| if (trace) writefln("Test #%s, connect %s:%s", test + 1, host, port); |
| |
| if (trace) write("testVoid()"); |
| client.testVoid(); |
| if (trace) writeln(" = void"); |
| |
| if (trace) write("testString(\"Test\")"); |
| string s = client.testString("Test"); |
| if (trace) writefln(" = \"%s\"", s); |
| enforce(s == "Test"); |
| |
| if (trace) write("testByte(1)"); |
| byte u8 = client.testByte(1); |
| if (trace) writefln(" = %s", u8); |
| enforce(u8 == 1); |
| |
| if (trace) write("testI32(-1)"); |
| int i32 = client.testI32(-1); |
| if (trace) writefln(" = %s", i32); |
| enforce(i32 == -1); |
| |
| if (trace) write("testI64(-34359738368)"); |
| long i64 = client.testI64(-34359738368L); |
| if (trace) writefln(" = %s", i64); |
| enforce(i64 == -34359738368L); |
| |
| if (trace) write("testDouble(-5.2098523)"); |
| double dub = client.testDouble(-5.2098523); |
| if (trace) writefln(" = %s", dub); |
| enforce(dub == -5.2098523); |
| |
| // TODO: add testBinary() call |
| |
| Xtruct out1; |
| out1.string_thing = "Zero"; |
| out1.byte_thing = 1; |
| out1.i32_thing = -3; |
| out1.i64_thing = -5; |
| if (trace) writef("testStruct(%s)", out1); |
| auto in1 = client.testStruct(out1); |
| if (trace) writefln(" = %s", in1); |
| enforce(in1 == out1); |
| |
| if (trace) write("testNest({1, {\"Zero\", 1, -3, -5}), 5}"); |
| Xtruct2 out2; |
| out2.byte_thing = 1; |
| out2.struct_thing = out1; |
| out2.i32_thing = 5; |
| auto in2 = client.testNest(out2); |
| in1 = in2.struct_thing; |
| if (trace) writefln(" = {%s, {\"%s\", %s, %s, %s}, %s}", in2.byte_thing, |
| in1.string_thing, in1.byte_thing, in1.i32_thing, in1.i64_thing, |
| in2.i32_thing); |
| enforce(in2 == out2); |
| |
| int[int] mapout; |
| for (int i = 0; i < 5; ++i) { |
| mapout[i] = i - 10; |
| } |
| if (trace) writef("testMap({%s})", mapout); |
| auto mapin = client.testMap(mapout); |
| if (trace) writefln(" = {%s}", mapin); |
| enforce(mapin == mapout); |
| |
| auto setout = new HashSet!int; |
| for (int i = -2; i < 3; ++i) { |
| setout ~= i; |
| } |
| if (trace) writef("testSet(%s)", setout); |
| auto setin = client.testSet(setout); |
| if (trace) writefln(" = %s", setin); |
| enforce(setin == setout); |
| |
| int[] listout; |
| for (int i = -2; i < 3; ++i) { |
| listout ~= i; |
| } |
| if (trace) writef("testList(%s)", listout); |
| auto listin = client.testList(listout); |
| if (trace) writefln(" = %s", listin); |
| enforce(listin == listout); |
| |
| { |
| if (trace) write("testEnum(ONE)"); |
| auto ret = client.testEnum(Numberz.ONE); |
| if (trace) writefln(" = %s", ret); |
| enforce(ret == Numberz.ONE); |
| |
| if (trace) write("testEnum(TWO)"); |
| ret = client.testEnum(Numberz.TWO); |
| if (trace) writefln(" = %s", ret); |
| enforce(ret == Numberz.TWO); |
| |
| if (trace) write("testEnum(THREE)"); |
| ret = client.testEnum(Numberz.THREE); |
| if (trace) writefln(" = %s", ret); |
| enforce(ret == Numberz.THREE); |
| |
| if (trace) write("testEnum(FIVE)"); |
| ret = client.testEnum(Numberz.FIVE); |
| if (trace) writefln(" = %s", ret); |
| enforce(ret == Numberz.FIVE); |
| |
| if (trace) write("testEnum(EIGHT)"); |
| ret = client.testEnum(Numberz.EIGHT); |
| if (trace) writefln(" = %s", ret); |
| enforce(ret == Numberz.EIGHT); |
| } |
| |
| if (trace) write("testTypedef(309858235082523)"); |
| UserId uid = client.testTypedef(309858235082523L); |
| if (trace) writefln(" = %s", uid); |
| enforce(uid == 309858235082523L); |
| |
| if (trace) write("testMapMap(1)"); |
| auto mm = client.testMapMap(1); |
| if (trace) writefln(" = {%s}", mm); |
| // Simply doing == doesn't seem to work for nested AAs. |
| foreach (key, value; mm) { |
| enforce(testMapMapReturn[key] == value); |
| } |
| foreach (key, value; testMapMapReturn) { |
| enforce(mm[key] == value); |
| } |
| |
| Insanity insane; |
| insane.userMap[Numberz.FIVE] = 5000; |
| Xtruct truck; |
| truck.string_thing = "Truck"; |
| truck.byte_thing = 8; |
| truck.i32_thing = 8; |
| truck.i64_thing = 8; |
| insane.xtructs ~= truck; |
| if (trace) write("testInsanity()"); |
| auto whoa = client.testInsanity(insane); |
| if (trace) writefln(" = %s", whoa); |
| |
| // Commented for now, this is cumbersome to write without opEqual getting |
| // called on AA comparison. |
| // enforce(whoa == testInsanityReturn); |
| |
| { |
| try { |
| if (trace) write("client.testException(\"Xception\") =>"); |
| client.testException("Xception"); |
| if (trace) writeln(" void\nFAILURE"); |
| throw new Exception("testException failed."); |
| } catch (Xception e) { |
| if (trace) writefln(" {%s, \"%s\"}", e.errorCode, e.message); |
| } |
| |
| try { |
| if (trace) write("client.testException(\"TException\") =>"); |
| client.testException("Xception"); |
| if (trace) writeln(" void\nFAILURE"); |
| throw new Exception("testException failed."); |
| } catch (TException e) { |
| if (trace) writefln(" {%s}", e.msg); |
| } |
| |
| try { |
| if (trace) write("client.testException(\"success\") =>"); |
| client.testException("success"); |
| if (trace) writeln(" void"); |
| } catch (Exception e) { |
| if (trace) writeln(" exception\nFAILURE"); |
| throw new Exception("testException failed."); |
| } |
| } |
| |
| { |
| try { |
| if (trace) write("client.testMultiException(\"Xception\", \"test 1\") =>"); |
| auto result = client.testMultiException("Xception", "test 1"); |
| if (trace) writeln(" result\nFAILURE"); |
| throw new Exception("testMultiException failed."); |
| } catch (Xception e) { |
| if (trace) writefln(" {%s, \"%s\"}", e.errorCode, e.message); |
| } |
| |
| try { |
| if (trace) write("client.testMultiException(\"Xception2\", \"test 2\") =>"); |
| auto result = client.testMultiException("Xception2", "test 2"); |
| if (trace) writeln(" result\nFAILURE"); |
| throw new Exception("testMultiException failed."); |
| } catch (Xception2 e) { |
| if (trace) writefln(" {%s, {\"%s\"}}", |
| e.errorCode, e.struct_thing.string_thing); |
| } |
| |
| try { |
| if (trace) writef("client.testMultiException(\"success\", \"test 3\") =>"); |
| auto result = client.testMultiException("success", "test 3"); |
| if (trace) writefln(" {{\"%s\"}}", result.string_thing); |
| } catch (Exception e) { |
| if (trace) writeln(" exception\nFAILURE"); |
| throw new Exception("testMultiException failed."); |
| } |
| } |
| |
| // Do not run oneway test when doing multiple iterations, as it blocks the |
| // server for three seconds. |
| if (numTests == 1) { |
| if (trace) writef("client.testOneway(3) =>"); |
| auto onewayWatch = StopWatch(AutoStart.yes); |
| client.testOneway(3); |
| onewayWatch.stop(); |
| if (onewayWatch.peek().msecs > 200) { |
| if (trace) { |
| writefln(" FAILURE - took %s ms", onewayWatch.peek().usecs / 1000.0); |
| } |
| throw new Exception("testOneway failed."); |
| } else { |
| if (trace) { |
| writefln(" success - took %s ms", onewayWatch.peek().usecs / 1000.0); |
| } |
| } |
| |
| // Redo a simple test after the oneway to make sure we aren't "off by |
| // one", which would be the case if the server treated oneway methods |
| // like normal ones. |
| if (trace) write("re-test testI32(-1)"); |
| i32 = client.testI32(-1); |
| if (trace) writefln(" = %s", i32); |
| } |
| |
| // Time metering. |
| sw.stop(); |
| |
| immutable tot = sw.peek().usecs; |
| if (trace) writefln("Total time: %s us\n", tot); |
| |
| time_tot += tot; |
| if (time_min == 0 || tot < time_min) { |
| time_min = tot; |
| } |
| if (tot > time_max) { |
| time_max = tot; |
| } |
| protocol.transport.close(); |
| |
| sw.reset(); |
| } |
| |
| writeln("All tests done."); |
| |
| if (numTests > 1) { |
| auto time_avg = time_tot / numTests; |
| writefln("Min time: %s us", time_min); |
| writefln("Max time: %s us", time_max); |
| writefln("Avg time: %s us", time_avg); |
| } |
| } |