| # |
| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| # |
| |
| AC_PREREQ(2.65) |
| AC_CONFIG_MACRO_DIR([./aclocal]) |
| |
| AC_INIT([thrift], [0.14.1]) |
| |
| AC_CONFIG_AUX_DIR([.]) |
| |
| AM_INIT_AUTOMAKE([1.13 subdir-objects tar-ustar]) |
| PKG_PROG_PKG_CONFIG |
| |
| AC_ARG_VAR([PY_PREFIX], [Prefix for installing Python modules. |
| (Normal --prefix is ignored for Python because |
| Python has different conventions.) |
| Default = "/usr"]) |
| AS_IF([test "x$PY_PREFIX" = x], [PY_PREFIX="/usr"]) |
| |
| AC_ARG_VAR([JAVA_PREFIX], [Prefix for installing the Java lib jar. |
| Default = "/usr/local/lib"]) |
| AS_IF([test "x$JAVA_PREFIX" != x], [JAVA_PREFIX="$JAVA_PREFIX/usr/local/lib"], |
| [test "x$PREFIX" != x], [JAVA_PREFIX="$PREFIX/usr/local/lib"], |
| [JAVA_PREFIX="/usr/local/lib"]) |
| |
| AC_ARG_VAR([RUBY_PREFIX], [Prefix for installing Ruby modules. |
| (Normal --prefix is ignored for Ruby because |
| Ruby has different conventions.) |
| Default = none, let ruby setup decide]) |
| |
| AC_ARG_VAR([PHP_PREFIX], [Prefix for installing PHP modules. |
| (Normal --prefix is ignored for PHP because |
| PHP has different conventions.) |
| Default = "/usr/lib/php"]) |
| AS_IF([test "x$PHP_PREFIX" = x], [PHP_PREFIX="/usr/lib/php"]) |
| |
| AC_ARG_VAR([PHP_CONFIG_PREFIX], |
| [Prefix for installing PHP extension module .ini file. |
| (Normal --prefix is ignored for PHP because PHP has |
| different conventions.) |
| Default = "/etc/php.d"]) |
| AS_IF([test "x$PHP_CONFIG_PREFIX" = x], [PHP_CONFIG_PREFIX="/etc/php.d"]) |
| |
| AC_ARG_VAR([INSTALLDIRS], [When installing Perl modules, specifies which |
| of the sets of installation directories |
| to choose: perl, site or vendor. |
| Default = "vendor"]) |
| AS_IF([test "x$INSTALLDIRS" = x], [INSTALLDIRS="vendor"]) |
| |
| AC_ARG_VAR([PERL_PREFIX], [Prefix for installing Perl modules. |
| (Normal --prefix is ignored for Perl because |
| Perl has different conventions.) |
| Ignored, when INSTALLDIRS set to site or vendor. |
| Default = "/usr/local/lib"]) |
| AS_IF([test "x$PERL_PREFIX" = x], [PERL_PREFIX="/usr/local"]) |
| |
| AC_ARG_VAR([CABAL_CONFIGURE_FLAGS], |
| [Extra flags to pass to cabal: "cabal Setup.lhs configure $CABAL_CONFIGURE_FLAGS". |
| (Typically used to set --user or force --global.)]) |
| |
| AC_SUBST(CABAL_CONFIGURE_FLAGS) |
| |
| AC_ARG_VAR([D_IMPORT_PREFIX], [Prefix for installing D modules. |
| [INCLUDEDIR/d2]]) |
| AS_IF([test "x$D_IMPORT_PREFIX" = x], [D_IMPORT_PREFIX="${includedir}/d2"]) |
| |
| AC_ARG_VAR([DMD_LIBEVENT_FLAGS], [DMD flags for linking libevent (auto-detected if not set).]) |
| AC_ARG_VAR([DMD_OPENSSL_FLAGS], [DMD flags for linking OpenSSL (auto-detected if not set).]) |
| |
| AC_ARG_VAR([THRIFT], [Path to the thrift tool (needed for cross-compilation).]) |
| AS_IF([test "x$THRIFT" = x], [THRIFT=`pwd`/compiler/cpp/thrift]) |
| |
| AC_PROG_CC |
| AC_PROG_CPP |
| AC_PROG_CXX |
| AC_PROG_INSTALL |
| AC_PROG_LIBTOOL |
| AC_PROG_MAKE_SET |
| AC_PROG_BISON(2.5) |
| AC_PROG_YACC |
| AC_PROG_LEX |
| AM_PROG_LEX |
| AC_PROG_LN_S |
| AC_PROG_MKDIR_P |
| AC_PROG_AWK |
| AC_PROG_RANLIB |
| |
| AC_LANG([C++]) |
| AX_CXX_COMPILE_STDCXX_11([noext], [mandatory]) |
| |
| AM_EXTRA_RECURSIVE_TARGETS([style]) |
| AC_SUBST(CPPSTYLE_CMD, 'find . -type f \( -iname "*.h" -or -iname "*.cpp" -or -iname "*.cc" -or -iname "*.tcc" \) -printf "Reformatting: %h/%f\n" -exec clang-format -i {} \;') |
| # ' |
| # The above comment is to fix editor syntax highlighting |
| |
| AC_ARG_ENABLE([libs], |
| AS_HELP_STRING([--enable-libs], [build the Apache Thrift libraries [default=yes]]), |
| [], enable_libs=yes |
| ) |
| have_libs=yes |
| if test "$enable_libs" = "no"; then |
| have_libs="no" |
| with_as3="no" |
| with_cpp="no" |
| with_c_glib="no" |
| with_cl="no" |
| with_java="no" |
| with_python="no" |
| with_py3="no" |
| with_ruby="no" |
| with_haskell="no" |
| with_haxe="no" |
| with_netstd="no" |
| with_perl="no" |
| with_php="no" |
| with_php_extension="no" |
| with_dart="no" |
| with_erlang="no" |
| with_go="no" |
| with_d="no" |
| with_nodejs="no" |
| with_nodets="no" |
| with_lua="no" |
| with_rs="no" |
| with_swift="no" |
| fi |
| |
| AX_THRIFT_LIB(as3, [as3], yes) |
| have_as3=no |
| if test "$with_as3" = "yes"; then |
| if test "${FLEX_HOME+set}" = set; then |
| AC_PATH_PROGS([FLEX_COMPC], [compc], "fail", [$PATH$PATH_SEPARATOR$FLEX_HOME/bin]) |
| if test "$FLEX_COMPC" != "fail"; then |
| have_as3="yes" |
| fi |
| fi |
| fi |
| AM_CONDITIONAL(WITH_AS3, [test "$have_as3" = "yes"]) |
| |
| AX_THRIFT_LIB(cpp, [C++], yes) |
| have_cpp=no |
| if test "$with_cpp" = "yes"; then |
| AX_BOOST_BASE([1.56.0]) |
| if test "x$succeeded" = "xyes" ; then |
| AC_SUBST([BOOST_LIB_DIR], [$(echo "$BOOST_LDFLAGS" | sed -e 's/^\-L//')]) |
| AC_SUBST([BOOST_CHRONO_LDADD], [$(echo "$BOOST_LIB_DIR/libboost_chrono.a")]) |
| AC_SUBST([BOOST_FILESYSTEM_LDADD], [$(echo "$BOOST_LIB_DIR/libboost_filesystem.a")]) |
| AC_SUBST([BOOST_SYSTEM_LDADD], [$(echo "$BOOST_LIB_DIR/libboost_system.a")]) |
| AC_SUBST([BOOST_TEST_LDADD], [$(echo "$BOOST_LIB_DIR/libboost_unit_test_framework.a")]) |
| AC_SUBST([BOOST_THREAD_LDADD], [$(echo "$BOOST_LIB_DIR/libboost_thread.a")]) |
| have_cpp="yes" |
| fi |
| |
| AX_LIB_EVENT([2.0]) |
| have_libevent=$success |
| |
| AX_LIB_ZLIB([1.2.3]) |
| have_zlib=$success |
| |
| AX_THRIFT_LIB(qt5, [Qt5], yes) |
| have_qt5=no |
| qt_reduce_reloc="" |
| if test "$with_qt5" = "yes"; then |
| PKG_CHECK_MODULES([QT5], [Qt5Core >= 5.0, Qt5Network >= 5.0], |
| [have_qt5=yes;qt_reduce_reloc=`$PKG_CONFIG --variable=qt_config Qt5Core | grep "reduce_relocations"`], |
| [have_qt5=no]) |
| fi |
| if test "$have_qt5" = "yes"; then |
| AC_PATH_PROGS([QT5_MOC], [moc-qt5 moc], "fail") |
| if test "$QT5_MOC" = "fail"; then |
| have_qt5=no |
| fi |
| fi |
| fi |
| AM_CONDITIONAL([WITH_CPP], [test "$have_cpp" = "yes"]) |
| AM_CONDITIONAL([AMX_HAVE_LIBEVENT], [test "$have_libevent" = "yes"]) |
| AM_CONDITIONAL([AMX_HAVE_ZLIB], [test "$have_zlib" = "yes"]) |
| AM_CONDITIONAL([AMX_HAVE_QT5], [test "$have_qt5" = "yes"]) |
| AM_CONDITIONAL([QT5_REDUCE_RELOCATIONS], [test "x$qt_reduce_reloc" != "x"]) |
| |
| AX_THRIFT_LIB(c_glib, [C (GLib)], yes) |
| if test "$with_c_glib" = "yes"; then |
| PKG_CHECK_MODULES([GLIB], [glib-2.0 >= 2.0], have_glib2=yes, have_glib2=no) |
| PKG_CHECK_MODULES([GOBJECT], [gobject-2.0 >= 2.0], have_gobject2=yes, have_gobject2=no) |
| if test "$have_glib2" = "yes" -a "$have_gobject2" = "yes" ; then |
| AC_PATH_PROG([GSETTINGS], [gsettings]) |
| have_c_glib="yes" |
| fi |
| fi |
| AM_CONDITIONAL(WITH_C_GLIB, [test "$have_glib2" = "yes" -a "$have_gobject2" = "yes"]) |
| |
| # echo "OpenSSL check" |
| if test "$have_cpp" = "yes" -o "$have_c_glib" = "yes"; then |
| # echo "Have cpp or c so we check for OpenSSL" |
| AX_CHECK_OPENSSL() |
| fi |
| |
| |
| AX_THRIFT_LIB(java, [Java], yes) |
| if test "$with_java" = "yes"; then |
| AX_JAVAC_AND_JAVA |
| AC_PATH_PROG([ANT], [ant]) |
| AX_CHECK_ANT_VERSION($ANT, 1.7) |
| AC_SUBST(CLASSPATH) |
| AC_SUBST(ANT_FLAGS) |
| AC_SUBST(GRADLE_OPTS) |
| if test "x$JAVA" != "x" && test "x$JAVAC" != "x" && test "x$ANT" != "x" ; then |
| have_java="yes" |
| fi |
| fi |
| AM_CONDITIONAL([WITH_JAVA], [test "$have_java" = "yes"]) |
| |
| AX_THRIFT_LIB(erlang, [Erlang], yes) |
| if test "$with_erlang" = "yes"; then |
| AC_ERLANG_PATH_ERL |
| AC_ERLANG_PATH_ERLC |
| AC_PATH_PROG([REBAR], [rebar3]) |
| if test -n "$ERLC" ; then |
| AC_ERLANG_SUBST_LIB_DIR |
| # Install into the detected Erlang directory instead of $libdir/erlang/lib |
| ERLANG_INSTALL_LIB_DIR="$ERLANG_LIB_DIR" |
| AC_ERLANG_SUBST_INSTALL_LIB_SUBDIR(AC_PACKAGE_NAME, AC_PACKAGE_VERSION) |
| fi |
| if test -n "$ERL" -a -n "$ERLC" && test "x$REBAR" != "x" ; then |
| have_erlang="yes" |
| |
| # otp_release is simply a number (like "17") for OTP17+ while "R16..." for OTP16 or less. |
| # OTP version is currently only used for running tests. |
| if $ERL -eval 'erlang:display(erlang:system_info(otp_release)),halt().' -noshell | grep "^\"R" >/dev/null; then |
| erlang_otp16_or_less="yes" |
| fi |
| fi |
| fi |
| AM_CONDITIONAL(WITH_ERLANG, [test "$have_erlang" = "yes"]) |
| AM_CONDITIONAL(ERLANG_OTP16, [test "$erlang_otp16_or_less" = "yes"]) |
| |
| AX_THRIFT_LIB(nodejs, [Nodejs], yes) |
| have_nodejs=no |
| if test "$with_nodejs" = "yes"; then |
| AC_PATH_PROGS([NODEJS], [nodejs node]) |
| AC_PATH_PROG([NPM], [npm]) |
| if test "x$NODEJS" != "x" -a "x$NPM" != "x"; then |
| have_nodejs="yes" |
| fi |
| fi |
| AM_CONDITIONAL(WITH_NODEJS, [test "$have_nodejs" = "yes"]) |
| AM_CONDITIONAL(HAVE_NPM, [test "x$NPM" != "x"]) |
| |
| AX_THRIFT_LIB(nodets, [Nodets], yes) |
| have_nodets=no |
| if test "$with_nodets" = "yes"; then |
| AC_PATH_PROGS([NODETS], [nodets node]) |
| AC_PATH_PROG([NPM], [npm]) |
| if test "x$NODETS" != "x" -a "x$NPM" != "x"; then |
| have_nodets="yes" |
| fi |
| fi |
| AM_CONDITIONAL(WITH_NODETS, [test "$have_nodets" = "yes"]) |
| AM_CONDITIONAL(HAVE_NPM, [test "x$NPM" != "x"]) |
| |
| AX_THRIFT_LIB(lua, [Lua], yes) |
| have_lua=no |
| if test "$with_lua" = "yes"; then |
| AX_PROG_LUA(5.2,, have_lua="yes", have_lua="no") |
| if test "$have_lua" = "yes"; then |
| AX_LUA_HEADERS(, have_lua="no") |
| AX_LUA_LIBS(, have_lua="no") |
| fi |
| fi |
| AM_CONDITIONAL(WITH_LUA, [test "$have_lua" = "yes"]) |
| |
| # Find python regardless of with_python value, because it's needed by make cross |
| AM_PATH_PYTHON(2.6,, :) |
| AX_THRIFT_LIB(python, [Python], yes) |
| if test "$with_python" = "yes"; then |
| if test -n "$PYTHON"; then |
| have_python="yes" |
| fi |
| AC_PATH_PROG([TRIAL], [trial]) |
| if test -n "$TRIAL"; then |
| have_trial="yes" |
| fi |
| fi |
| AM_CONDITIONAL(WITH_PYTHON, [test "$have_python" = "yes"]) |
| AM_CONDITIONAL(WITH_TWISTED_TEST, [test "$have_trial" = "yes"]) |
| |
| # Find "python3" executable. |
| # It's distro specific and far from ideal but needed to cross test py2-3 at once. |
| # TODO: find "python2" if it's 3.x |
| have_py3="no" |
| AX_THRIFT_LIB(py3, [Py3], yes) |
| if test "$with_py3" = "yes"; then |
| # if $PYTHON is 2.x then search for python 3. otherwise, $PYTHON is already 3.x |
| if $PYTHON --version 2>&1 | grep -q "Python 2"; then |
| AC_PATH_PROGS([PYTHON3], [python3 python3.8 python38 python3.7 python37 python3.6 python36 python3.5 python35 python3.4 python34]) |
| if test -n "$PYTHON3"; then |
| have_py3="yes" |
| fi |
| elif $PYTHON --version 2>&1 | grep -q "Python 3"; then |
| have_py3="yes" |
| PYTHON3=$PYTHON |
| fi |
| fi |
| AM_CONDITIONAL(WITH_PY3, [test "$have_py3" = "yes"]) |
| |
| AX_THRIFT_LIB(perl, [Perl], yes) |
| if test "$with_perl" = "yes"; then |
| AC_PATH_PROG([PERL], [perl]) |
| if test -n "$PERL" ; then |
| AC_PROG_PERL_MODULES([Bit::Vector], success="yes", success="no") |
| have_perl_bit_vector="$success" |
| AC_PROG_PERL_MODULES([Class::Accessor], success="yes", success="no") |
| have_perl_class_accessor="$success" |
| fi |
| if test -n "$PERL" -a "$have_perl_bit_vector" = "yes" ; then |
| if test -n "$PERL" -a "$have_perl_class_accessor" = "yes" ; then |
| have_perl="yes" |
| fi |
| fi |
| fi |
| AM_CONDITIONAL(WITH_PERL, [test "$have_perl" = "yes"]) |
| |
| AX_THRIFT_LIB(php, [PHP], yes) |
| if test "$with_php" = "yes"; then |
| AC_PATH_PROG([PHP], [php]) |
| if test -n "$PHP" ; then |
| have_php="yes" |
| fi |
| fi |
| AM_CONDITIONAL(WITH_PHP, [test "$have_php" = "yes"]) |
| |
| AX_THRIFT_LIB(php_extension, [PHP_EXTENSION], yes) |
| if test "$with_php_extension" = "yes"; then |
| if test -f "lib/php/src/ext/thrift_protocol/configure"; then |
| AC_PATH_PROG([PHP_CONFIG], [php-config]) |
| if test -n "$PHP_CONFIG" ; then |
| AC_CONFIG_SUBDIRS([lib/php/src/ext/thrift_protocol]) |
| have_php_extension="yes" |
| fi |
| fi |
| fi |
| AM_CONDITIONAL(WITH_PHP_EXTENSION, [test "$have_php_extension" = "yes"]) |
| |
| AX_THRIFT_LIB(dart, [DART], yes) |
| if test "$with_dart" = "yes"; then |
| AC_PATH_PROG([DART], [dart]) |
| AC_PATH_PROG([DARTPUB], [pub]) |
| if test "x$DART" != "x" -a "x$DARTPUB" != "x"; then |
| have_dart="yes" |
| fi |
| fi |
| AM_CONDITIONAL(WITH_DART, [test "$have_dart" = "yes"]) |
| |
| AX_THRIFT_LIB(ruby, [Ruby], yes) |
| have_ruby=no |
| if test "$with_ruby" = "yes"; then |
| AC_PATH_PROG([RUBY], [ruby]) |
| AC_PATH_PROG([BUNDLER], [bundle]) |
| if test "x$RUBY" != "x" -a "x$BUNDLER" != "x"; then |
| have_ruby="yes" |
| fi |
| fi |
| AM_CONDITIONAL(WITH_RUBY, [test "$have_ruby" = "yes"]) |
| AM_CONDITIONAL(HAVE_BUNDLER, [test "x$BUNDLER" != "x"]) |
| |
| AX_THRIFT_LIB(haskell, [Haskell], yes) |
| have_haskell=no |
| RUNHASKELL=true |
| CABAL=true |
| if test "$with_haskell" = "yes"; then |
| AC_PATH_PROG([CABAL], [cabal]) |
| AC_PATH_PROG([RUNHASKELL], [runhaskell]) |
| if test "x$CABAL" != "x" -a "x$RUNHASKELL" != "x"; then |
| have_haskell="yes" |
| else |
| RUNHASKELL=true |
| CABAL=true |
| fi |
| fi |
| AC_SUBST(CABAL) |
| AC_SUBST(RUNHASKELL) |
| AM_CONDITIONAL(WITH_HASKELL, [test "$have_haskell" = "yes"]) |
| |
| AX_THRIFT_LIB(go, [Go], yes) |
| if test "$with_go" = "yes"; then |
| AC_PATH_PROG([GO], [go]) |
| if [[ -x "$GO" ]] ; then |
| AS_IF([test -n "$GO"],[ |
| ax_go_version="1.4" |
| ax_go17_version="1.7" |
| |
| AC_MSG_CHECKING([for Go version]) |
| golang_version=`$GO version 2>&1 | $SED -e 's/\(go \)\(version \)\(go\)\(@<:@0-9@:>@.@<:@0-9@:>@.@<:@0-9@:>@\)\(@<:@\*@:>@*\).*/\4/'` |
| AC_MSG_RESULT($golang_version) |
| AC_SUBST([golang_version],[$golang_version]) |
| AX_COMPARE_VERSION([$ax_go_version],[le],[$golang_version],[ |
| : |
| have_go="yes" |
| ],[ |
| : |
| have_go="no" |
| ]) |
| AX_COMPARE_VERSION([$golang_version],[lt],[$ax_go17_version],[ |
| : |
| go_version_lt_17="yes" |
| ],[ |
| : |
| go_version_lt_17="no" |
| ]) |
| ],[ |
| AC_MSG_WARN([could not find Go ]) |
| have_go="no" |
| ]) |
| fi |
| fi |
| AM_CONDITIONAL(WITH_GO, [test "$have_go" = "yes"]) |
| AM_CONDITIONAL([GOVERSION_LT_17], [test "$go_version_lt_17" = "yes"]) |
| |
| AX_THRIFT_LIB(swift, [Swift], yes) |
| have_swift="no" |
| if test "$with_swift" = "yes"; then |
| AC_PATH_PROG([SWIFT], [swift]) |
| if test "x$SWIFT" != "x" -a "x$SWIFT" != "x"; then |
| have_swift="yes" |
| fi |
| fi |
| AM_CONDITIONAL([WITH_SWIFT], [test "$have_swift" = "yes"]) |
| |
| AX_THRIFT_LIB(rs, [Rust], yes) |
| have_rs="no" |
| if test "$with_rs" = "yes"; then |
| AC_PATH_PROG([CARGO], [cargo]) |
| AC_PATH_PROG([RUSTC], [rustc]) |
| if [[ -x "$CARGO" ]] && [[ -x "$RUSTC" ]]; then |
| min_rustc_version="1.13" |
| |
| AC_MSG_CHECKING([for rustc version]) |
| rustc_version=`$RUSTC --version 2>&1 | $SED -e 's/\(rustc \)\([0-9]\)\.\([0-9][0-9]*\)\.\([0-9][0-9]*\).*/\2.\3/'` |
| AC_MSG_RESULT($rustc_version) |
| AC_SUBST([rustc_version],[$rustc_version]) |
| |
| AX_COMPARE_VERSION([$min_rustc_version],[le],[$rustc_version],[ |
| : |
| have_rs="yes" |
| ],[ |
| : |
| have_rs="no" |
| ]) |
| fi |
| fi |
| AM_CONDITIONAL(WITH_RS, [test "$have_rs" = "yes"]) |
| |
| AX_THRIFT_LIB(cl, [Common Lisp], yes) |
| have_cl="no" |
| if test "$with_cl" = "yes"; then |
| AC_PATH_PROG([SBCL], [sbcl]) |
| if test "x$SBCL" != "x"; then |
| have_cl="yes" |
| fi |
| fi |
| AM_CONDITIONAL(WITH_CL, [test "$have_cl" = "yes"]) |
| |
| AX_THRIFT_LIB(haxe, [Haxe], yes) |
| if test "$with_haxe" = "yes"; then |
| AC_PATH_PROG([HAXE], [haxe]) |
| if [[ -x "$HAXE" ]] ; then |
| AX_PROG_HAXE_VERSION( [3.1.3], have_haxe="yes", have_haxe="no") |
| fi |
| fi |
| AM_CONDITIONAL(WITH_HAXE, [test "$have_haxe" = "yes"]) |
| |
| |
| AX_THRIFT_LIB(netstd, [.NET Core], yes) |
| if test "$with_netstd" = "yes"; then |
| AC_PATH_PROG([DOTNETCORE], [dotnet]) |
| if [[ -x "$DOTNETCORE" ]] ; then |
| AX_PROG_DOTNETCORE_VERSION( [3.1.0], have_netstd="yes", have_netstd="no") |
| fi |
| fi |
| AM_CONDITIONAL(WITH_DOTNET, [test "$have_netstd" = "yes"]) |
| |
| |
| AX_THRIFT_LIB(d, [D], yes) |
| if test "$with_d" = "yes"; then |
| AX_DMD |
| AC_SUBST(DMD) |
| if test "x$DMD" != "x"; then |
| have_d="yes" |
| fi |
| fi |
| |
| # Determine actual name of the generated D library for use in the command line |
| # when compiling tests. This is needed because the -l<lib> syntax doesn't work |
| # with OPTLINK (Windows). |
| lib_prefix=lib |
| lib_suffix=a |
| case "$host_os" in |
| cygwin* | mingw* | pw32* | cegcc*) |
| lib_prefix="" |
| lib_suffix=lib |
| ;; |
| esac |
| D_LIB_NAME="${lib_prefix}thriftd.${lib_suffix}" |
| AC_SUBST(D_LIB_NAME) |
| D_EVENT_LIB_NAME="${lib_prefix}thriftd-event.${lib_suffix}" |
| AC_SUBST(D_EVENT_LIB_NAME) |
| D_SSL_LIB_NAME="${lib_prefix}thriftd-ssl.${lib_suffix}" |
| AC_SUBST(D_SSL_LIB_NAME) |
| |
| if test "$have_d" = "yes"; then |
| AX_CHECK_D_MODULE(deimos.event2.event) |
| have_deimos_event2=$success |
| |
| with_d_event_tests="no" |
| if test "$have_deimos_event2" = "yes"; then |
| if test "x$DMD_LIBEVENT_FLAGS" = "x"; then |
| if test "$dmd_optlink" = "yes"; then |
| AC_MSG_WARN([D libevent interface found, but cannot auto-detect \ |
| linker flags for OPTLINK. Please set DMD_LIBEVENT_FLAGS manually.]) |
| else |
| AX_LIB_EVENT([2.0]) |
| if test "$success" = "yes"; then |
| DMD_LIBEVENT_FLAGS=$(echo "-fuse-ld=gold $LIBEVENT_LDFLAGS $LIBEVENT_LIBS" | \ |
| sed -e 's/^ *//g;s/ *$//g;s/^\(.\)/-L\1/g;s/ */ -L/g') |
| with_d_event_tests="yes" |
| else |
| AC_MSG_WARN([D libevent interface present, but libevent library not found.]) |
| fi |
| fi |
| else |
| with_d_event_tests="yes" |
| fi |
| fi |
| |
| AX_CHECK_D_MODULE(deimos.openssl.ssl) |
| have_deimos_openssl=$success |
| |
| with_d_ssl_tests="no" |
| if test "$have_deimos_openssl" = "yes"; then |
| if test "x$DMD_OPENSSL_FLAGS" = "x"; then |
| if test "$dmd_optlink" = "yes"; then |
| AC_MSG_WARN([D OpenSSL interface found, but cannot auto-detect \ |
| linker flags for OPTLINK. Please set DMD_OPENSSL_FLAGS manually.]) |
| else |
| AX_CHECK_OPENSSL([with_d_ssl_tests="yes"]) |
| if test "$with_d_ssl_tests" = "yes"; then |
| DMD_OPENSSL_FLAGS=$(echo "-fuse-ld=gold $OPENSSL_LDFLAGS $OPENSSL_LIBS" | \ |
| sed -e 's/^ *//g;s/ *$//g;s/^\(.\)/-L\1/g;s/ */ -L/g') |
| else |
| AC_MSG_WARN([D OpenSSL interface present, but OpenSSL library not found.]) |
| fi |
| fi |
| else |
| with_d_ssl_tests="yes" |
| fi |
| fi |
| fi |
| |
| AM_CONDITIONAL(WITH_D, [test "$have_d" = "yes"]) |
| AM_CONDITIONAL(DMD_OPTLINK, [test "$dmd_optlink" = "yes"]) |
| AC_SUBST(DMD_OF_DIRSEP, "$dmd_of_dirsep") |
| AM_CONDITIONAL(HAVE_DEIMOS_EVENT2, [test "$have_deimos_event2" = "yes"]) |
| AM_CONDITIONAL(WITH_D_EVENT_TESTS, [test "$with_d_event_tests" = "yes"]) |
| AC_SUBST(DMD_LIBEVENT_FLAGS) |
| AM_CONDITIONAL(HAVE_DEIMOS_OPENSSL, [test "$have_deimos_openssl" = "yes"]) |
| AM_CONDITIONAL(WITH_D_SSL_TESTS, [test "$with_d_ssl_tests" = "yes"]) |
| AC_SUBST(DMD_OPENSSL_FLAGS) |
| |
| AC_ARG_ENABLE([tests], |
| AS_HELP_STRING([--enable-tests], [build tests [default=yes]]), |
| [], enable_tests=yes |
| ) |
| have_tests=yes |
| if test "$enable_tests" = "no"; then |
| have_tests="no" |
| fi |
| AM_CONDITIONAL(WITH_TESTS, [test "$have_tests" = "yes"]) |
| |
| AC_ARG_ENABLE([tutorial], |
| AS_HELP_STRING([--enable-tutorial], [build tutorial [default=yes]]), |
| [], enable_tutorial=yes |
| ) |
| have_tutorial=yes |
| if test "$enable_tutorial" = "no"; then |
| have_tutorial="no" |
| fi |
| AM_CONDITIONAL(WITH_TUTORIAL, [test "$have_tutorial" = "yes"]) |
| |
| AM_CONDITIONAL(MINGW, false) |
| case "${host_os}" in |
| *mingw*) |
| mingw32_support="yes" |
| AC_CHECK_HEADER(windows.h) |
| AM_CONDITIONAL(MINGW, true) |
| ;; |
| *) |
| AC_ISC_POSIX |
| ;; |
| esac |
| |
| AC_C_CONST |
| AC_C_INLINE |
| AC_C_VOLATILE |
| |
| AC_HEADER_STDBOOL |
| AC_HEADER_STDC |
| AC_HEADER_TIME |
| AC_HEADER_SYS_WAIT |
| AC_TYPE_SIGNAL |
| AC_CHECK_HEADERS([arpa/inet.h]) |
| AC_CHECK_HEADERS([sys/param.h]) |
| AC_CHECK_HEADERS([fcntl.h]) |
| AC_CHECK_HEADERS([inttypes.h]) |
| AC_CHECK_HEADERS([limits.h]) |
| AC_CHECK_HEADERS([netdb.h]) |
| AC_CHECK_HEADERS([netinet/in.h]) |
| AC_CHECK_HEADERS([pthread.h]) |
| AC_CHECK_HEADERS([signal.h]) |
| AC_CHECK_HEADERS([stddef.h]) |
| AC_CHECK_HEADERS([stdlib.h]) |
| AC_CHECK_HEADERS([sys/ioctl.h]) |
| AC_CHECK_HEADERS([sys/socket.h]) |
| AC_CHECK_HEADERS([sys/time.h]) |
| AC_CHECK_HEADERS([sys/un.h]) |
| AC_CHECK_HEADERS([poll.h]) |
| AC_CHECK_HEADERS([sys/poll.h]) |
| AC_CHECK_HEADERS([sys/resource.h]) |
| AC_CHECK_HEADERS([unistd.h]) |
| AC_CHECK_HEADERS([libintl.h]) |
| AC_CHECK_HEADERS([malloc.h]) |
| AC_CHECK_HEADERS([openssl/ssl.h]) |
| AC_CHECK_HEADERS([openssl/rand.h]) |
| AC_CHECK_HEADERS([openssl/x509v3.h]) |
| AC_CHECK_HEADERS([sched.h]) |
| AC_CHECK_HEADERS([wchar.h]) |
| |
| AC_CHECK_LIB(pthread, pthread_create) |
| dnl NOTE(dreiss): I haven't been able to find any really solid docs |
| dnl on what librt is and how it fits into various Unix systems. |
| dnl My best guess is that it is where glibc stashes its implementation |
| dnl of the POSIX Real-Time Extensions. This seems necessary on Linux, |
| dnl and we haven't yet found a system where this is a problem. |
| AC_CHECK_LIB(rt, clock_gettime) |
| AC_CHECK_LIB(socket, setsockopt) |
| |
| AC_TYPE_INT16_T |
| AC_TYPE_INT32_T |
| AC_TYPE_INT64_T |
| AC_TYPE_INT8_T |
| AC_TYPE_MODE_T |
| AC_TYPE_OFF_T |
| AC_TYPE_SIZE_T |
| AC_TYPE_SSIZE_T |
| AC_TYPE_UINT16_T |
| AC_TYPE_UINT32_T |
| AC_TYPE_UINT64_T |
| AC_TYPE_UINT8_T |
| AC_CHECK_TYPES([ptrdiff_t], [], [echo "ptrdiff_t not found or g++ not installed - cannot continue" && exit 1]) |
| |
| AC_STRUCT_TM |
| |
| dnl NOTE(dreiss): AI_ADDRCONFIG is not defined on OpenBSD. |
| AC_CHECK_DECL([AI_ADDRCONFIG], [], |
| [AC_DEFINE([AI_ADDRCONFIG], 0, |
| [Define if the AI_ADDRCONFIG symbol is unavailable])], |
| [ |
| #include <sys/types.h> |
| #include <sys/socket.h> |
| #include <netdb.h> |
| ]) |
| |
| AC_FUNC_ALLOCA |
| AC_FUNC_FORK |
| AC_FUNC_MALLOC |
| AC_FUNC_MEMCMP |
| AC_FUNC_REALLOC |
| AC_FUNC_SELECT_ARGTYPES |
| AC_FUNC_STAT |
| AC_FUNC_STRERROR_R |
| AC_FUNC_STRFTIME |
| AC_FUNC_VPRINTF |
| AC_CHECK_FUNCS([strtoul]) |
| AC_CHECK_FUNCS([bzero]) |
| AC_CHECK_FUNCS([ftruncate]) |
| AC_CHECK_FUNCS([gethostbyname]) |
| AC_CHECK_FUNCS([gethostbyname_r]) |
| AC_CHECK_FUNCS([gettimeofday]) |
| AC_CHECK_FUNCS([memmove]) |
| AC_CHECK_FUNCS([memset]) |
| AC_CHECK_FUNCS([mkdir]) |
| AC_CHECK_FUNCS([realpath]) |
| AC_CHECK_FUNCS([select]) |
| AC_CHECK_FUNCS([setlocale]) |
| AC_CHECK_FUNCS([socket]) |
| AC_CHECK_FUNCS([strchr]) |
| AC_CHECK_FUNCS([strdup]) |
| AC_CHECK_FUNCS([strerror]) |
| AC_CHECK_FUNCS([strstr]) |
| AC_CHECK_FUNCS([strtol]) |
| AC_CHECK_FUNCS([sqrt]) |
| dnl The following functions are optional. |
| AC_CHECK_FUNCS([alarm]) |
| AC_CHECK_FUNCS([clock_gettime]) |
| AC_CHECK_FUNCS([sched_get_priority_min]) |
| AC_CHECK_FUNCS([sched_get_priority_max]) |
| AC_CHECK_FUNCS([inet_ntoa]) |
| AC_CHECK_FUNCS([pow]) |
| |
| if test "$cross_compiling" = "no" ; then |
| AX_SIGNED_RIGHT_SHIFT |
| fi |
| |
| dnl autoscan thinks we need this macro because we have a member function |
| dnl called "error". Invoke the macro but don't run the check so autoscan |
| dnl thinks we are in the clear. It's highly unlikely that we will ever |
| dnl actually use the function that this checks for. |
| if false ; then |
| AC_FUNC_ERROR_AT_LINE |
| fi |
| |
| # --- Coverage hooks --- |
| |
| AC_ARG_ENABLE(coverage, |
| [ --enable-coverage turn on -fprofile-arcs -ftest-coverage], |
| [case "${enableval}" in |
| yes) ENABLE_COVERAGE=1 ;; |
| no) ENABLE_COVERAGE=0 ;; |
| *) AC_MSG_ERROR(bad value ${enableval} for --enable-cov) ;; |
| esac], |
| [ENABLE_COVERAGE=2]) |
| |
| if test "x[$]ENABLE_COVERAGE" = "x1"; then |
| AC_MSG_WARN(enable coverage) |
| GCOV_CFLAGS="`echo \"[$]CFLAGS\" | perl -pe 's/-O\d+//g;'` -fprofile-arcs -ftest-coverage" |
| GCOV_CXXFLAGS="`echo \"[$]CXXFLAGS\" | perl -pe 's/-O\d+//g;'` -fprofile-arcs -ftest-coverage" |
| GCOV_LDFLAGS="-XCClinker -fprofile-arcs -XCClinker -ftest-coverage" |
| fi |
| |
| AC_SUBST(ENABLE_COVERAGE) |
| AC_SUBST(GCOV_CFLAGS) |
| AC_SUBST(GCOV_CXXFLAGS) |
| AC_SUBST(GCOV_LDFLAGS) |
| |
| AC_CONFIG_HEADERS(config.h:config.hin) |
| AC_CONFIG_HEADERS(lib/cpp/src/thrift/config.h:config.hin) |
| AC_CONFIG_HEADERS(lib/c_glib/src/thrift/config.h:config.hin) |
| # guard against pre defined config.h |
| AH_TOP([ |
| #ifndef CONFIG_H |
| #define CONFIG_H |
| ]) |
| AH_BOTTOM([ |
| #endif |
| ]) |
| |
| |
| AC_CONFIG_FILES([ |
| Makefile |
| compiler/cpp/Makefile |
| compiler/cpp/src/Makefile |
| compiler/cpp/test/Makefile |
| lib/Makefile |
| lib/as3/Makefile |
| lib/cl/Makefile |
| lib/cpp/Makefile |
| lib/cpp/test/Makefile |
| lib/cpp/thrift-nb.pc |
| lib/cpp/thrift-z.pc |
| lib/cpp/thrift-qt5.pc |
| lib/cpp/thrift.pc |
| lib/c_glib/Makefile |
| lib/c_glib/thrift_c_glib.pc |
| lib/c_glib/test/Makefile |
| lib/d/Makefile |
| lib/d/test/Makefile |
| lib/erl/Makefile |
| lib/go/Makefile |
| lib/go/test/Makefile |
| lib/haxe/test/Makefile |
| lib/hs/Makefile |
| lib/java/Makefile |
| lib/js/Makefile |
| lib/js/test/Makefile |
| lib/json/Makefile |
| lib/json/test/Makefile |
| lib/netstd/Makefile |
| lib/nodejs/Makefile |
| lib/nodets/Makefile |
| lib/perl/Makefile |
| lib/perl/t/Makefile |
| lib/php/Makefile |
| lib/php/test/Makefile |
| lib/dart/Makefile |
| lib/py/Makefile |
| lib/rb/Makefile |
| lib/rs/Makefile |
| lib/rs/test/Makefile |
| lib/lua/Makefile |
| lib/swift/Makefile |
| lib/ts/Makefile |
| lib/xml/Makefile |
| lib/xml/test/Makefile |
| test/Makefile |
| test/features/Makefile |
| test/c_glib/Makefile |
| test/cl/Makefile |
| test/cpp/Makefile |
| test/erl/Makefile |
| test/go/Makefile |
| test/haxe/Makefile |
| test/hs/Makefile |
| test/lua/Makefile |
| test/netstd/Makefile |
| test/php/Makefile |
| test/dart/Makefile |
| test/perl/Makefile |
| test/py/Makefile |
| test/py.twisted/Makefile |
| test/py.tornado/Makefile |
| test/rb/Makefile |
| test/rs/Makefile |
| tutorial/Makefile |
| tutorial/c_glib/Makefile |
| tutorial/cl/Makefile |
| tutorial/cpp/Makefile |
| tutorial/d/Makefile |
| tutorial/go/Makefile |
| tutorial/haxe/Makefile |
| tutorial/hs/Makefile |
| tutorial/java/Makefile |
| tutorial/js/Makefile |
| tutorial/netstd/Makefile |
| tutorial/nodejs/Makefile |
| tutorial/dart/Makefile |
| tutorial/perl/Makefile |
| tutorial/php/Makefile |
| tutorial/py/Makefile |
| tutorial/py.twisted/Makefile |
| tutorial/py.tornado/Makefile |
| tutorial/rb/Makefile |
| tutorial/rs/Makefile |
| ]) |
| |
| if test "$have_as3" = "yes" ; then MAYBE_AS3="as3" ; else MAYBE_AS3="" ; fi |
| AC_SUBST([MAYBE_AS3]) |
| if test "$have_cpp" = "yes" ; then MAYBE_CPP="cpp" ; else MAYBE_CPP="" ; fi |
| AC_SUBST([MAYBE_CPP]) |
| if test "$have_c_glib" = "yes" ; then MAYBE_C_GLIB="c_glib" ; else MAYBE_C_GLIB="" ; fi |
| AC_SUBST([MAYBE_C_GLIB]) |
| if test "$have_d" = "yes" -a "$have_deimos_event2" = "yes" -a "$have_deimos_openssl" = "yes"; then MAYBE_D="d" ; else MAYBE_D="" ; fi |
| AC_SUBST([MAYBE_D]) |
| if test "$have_java" = "yes" ; then MAYBE_JAVA="java" ; else MAYBE_JAVA="" ; fi |
| AC_SUBST([MAYBE_JAVA]) |
| if test "$have_python" = "yes" ; then MAYBE_PYTHON="py" ; else MAYBE_PYTHON="" ; fi |
| AC_SUBST([MAYBE_PYTHON]) |
| if test "$have_py3" = "yes" ; then MAYBE_PY3="py3" ; else MAYBE_PY3="" ; fi |
| AC_SUBST([MAYBE_PY3]) |
| if test "$have_ruby" = "yes" ; then MAYBE_RUBY="rb" ; else MAYBE_RUBY="" ; fi |
| AC_SUBST([MAYBE_RUBY]) |
| if test "$have_haskell" = "yes" ; then MAYBE_HASKELL="hs" ; else MAYBE_HASKELL="" ; fi |
| AC_SUBST([MAYBE_HASKELL]) |
| if test "$have_perl" = "yes" ; then MAYBE_PERL="perl" ; else MAYBE_PERL="" ; fi |
| AC_SUBST([MAYBE_PERL]) |
| if test "$have_php" = "yes" ; then MAYBE_PHP="php" ; else MAYBE_PHP="" ; fi |
| AC_SUBST([MAYBE_PHP]) |
| if test "$have_dart" = "yes" ; then MAYBE_DART="dart" ; else MAYBE_DART="" ; fi |
| AC_SUBST([MAYBE_DART]) |
| if test "$have_go" = "yes" ; then MAYBE_GO="go" ; else MAYBE_GO="" ; fi |
| AC_SUBST([MAYBE_GO]) |
| if test "$have_nodejs" = "yes" ; then MAYBE_NODEJS="nodejs" ; else MAYBE_NODEJS="" ; fi |
| AC_SUBST([MAYBE_NODEJS]) |
| if test "$have_nodets" = "yes" ; then MAYBE_NODETS="nodets" ; else MAYBE_NODETS="" ; fi |
| AC_SUBST([MAYBE_NODETS]) |
| if test "$have_erlang" = "yes" ; then MAYBE_ERLANG="erl" ; else MAYBE_ERLANG="" ; fi |
| AC_SUBST([MAYBE_ERLANG]) |
| if test "$have_lua" = "yes" ; then MAYBE_LUA="lua" ; else MAYBE_LUA="" ; fi |
| AC_SUBST([MAYBE_LUA]) |
| if test "$have_rs" = "yes" ; then MAYBE_RS="rs" ; else MAYBE_RS="" ; fi |
| AC_SUBST([MAYBE_RS]) |
| if test "$have_swift" = "yes" ; then MAYBE_SWIFT="swift" ; else MAYBE_SWIFT="" ; fi |
| AC_SUBST([MAYBE_SWIFT]) |
| if test "$have_netstd" = "yes" ; then MAYBE_NETSTD="netstd" ; else MAYBE_NETSTD="" ; fi |
| AC_SUBST([MAYBE_NETSTD]) |
| if test "$have_cl" = "yes" ; then MAYBE_CL="cl" ; else MAYBE_CL="" ; fi |
| AC_SUBST([MAYBE_CL]) |
| |
| AC_OUTPUT |
| |
| |
| echo |
| echo "$PACKAGE $VERSION" |
| echo |
| echo "Building ActionScript3 Library : $have_as3" |
| echo "Building C (GLib) Library .... : $have_c_glib" |
| echo "Building C++ Library ......... : $have_cpp" |
| echo "Building Common Lisp Library.. : $have_cl" |
| echo "Building D Library ........... : $have_d" |
| echo "Building Dart Library ........ : $have_dart" |
| echo "Building .NET Standard Library : $have_netstd" |
| echo "Building Erlang Library ...... : $have_erlang" |
| echo "Building Go Library .......... : $have_go" |
| echo "Building Haskell Library ..... : $have_haskell" |
| echo "Building Haxe Library ........ : $have_haxe" |
| echo "Building Java Library ........ : $have_java" |
| echo "Building Lua Library ......... : $have_lua" |
| echo "Building NodeJS Library ...... : $have_nodejs" |
| echo "Building Perl Library ........ : $have_perl" |
| echo "Building PHP Library ......... : $have_php" |
| echo "Building Python Library ...... : $have_python" |
| echo "Building Py3 Library ......... : $have_py3" |
| echo "Building Ruby Library ........ : $have_ruby" |
| echo "Building Rust Library ........ : $have_rs" |
| echo "Building Swift Library ....... : $have_swift" |
| |
| if test "$have_as3" = "yes" ; then |
| echo |
| echo "ActionScript Library:" |
| echo " FLEX_HOME ................. : $FLEX_HOME" |
| echo " Using compc version ....... : $($FLEX_COMPC --version)" |
| fi |
| if test "$have_c_glib" = "yes" ; then |
| echo |
| echo "C (glib):" |
| echo " Using glib version ........ : $($GSETTINGS --version)" |
| fi |
| if test "$have_cpp" = "yes" ; then |
| echo |
| echo "C++ Library:" |
| echo " C++ compiler .............. : $CXX" |
| echo " Build TZlibTransport ...... : $have_zlib" |
| echo " Build TNonblockingServer .. : $have_libevent" |
| echo " Build TQTcpServer (Qt5) ... : $have_qt5" |
| echo " C++ compiler version ...... : $($CXX --version | head -1)" |
| fi |
| if test "$have_cl" = "yes" ; then |
| echo |
| echo "Common Lisp Library:" |
| echo " Using Common Lisp ......... : $SBCL" |
| echo " Using Common Lisp version . : $($SBCL --version)" |
| fi |
| if test "$have_d" = "yes" ; then |
| echo |
| echo "D Library:" |
| echo " Using D Compiler .......... : $DMD" |
| echo " Building D libevent tests . : $with_d_event_tests" |
| echo " Building D SSL tests ...... : $with_d_ssl_tests" |
| echo " Using D version ........... : $($DMD --version | head -1)" |
| fi |
| if test "$have_dart" = "yes" ; then |
| echo |
| echo "Dart Library:" |
| echo " Using Dart ................ : $DART" |
| echo " Using Pub ................. : $DARTPUB" |
| echo " Using Dart version ........ : $($DART --version 2>&1)" |
| fi |
| if test "$have_netstd" = "yes" ; then |
| echo |
| echo ".NET Standard Library:" |
| echo " Using dotnet .............. : $DOTNETCORE" |
| echo " Using dotnet version ...... : $DOTNETCORE_VERSION" |
| fi |
| if test "$have_erlang" = "yes" ; then |
| echo |
| echo "Erlang Library:" |
| echo " Using erlc ................ : $ERLC" |
| echo " Using rebar ............... : $REBAR" |
| echo " Using erlc version ........ : $($ERL -eval 'erlang:display(erlang:system_info(otp_release)), halt().' -noshell | tr -d '\"')" |
| fi |
| if test "$have_go" = "yes" ; then |
| echo |
| echo "Go Library:" |
| echo " Using Go................... : $GO" |
| echo " Using Go version........... : $($GO version)" |
| fi |
| if test "$have_haskell" = "yes" ; then |
| echo |
| echo "Haskell Library:" |
| echo " Using Cabal ............... : $CABAL" |
| echo " Using Haskell ............. : $RUNHASKELL" |
| echo " Using Haskell version ..... : $($RUNHASKELL --version)" |
| fi |
| if test "$have_haxe" = "yes" ; then |
| echo |
| echo "Haxe Library:" |
| echo " Using Haxe ................ : $HAXE" |
| echo " Using Haxe version ........ : $HAXE_VERSION" |
| fi |
| if test "$have_java" = "yes" ; then |
| echo |
| echo "Java Library:" |
| echo " Using gradlew ............. : lib/java/gradlew" |
| echo " Using java ................ : $JAVA" |
| echo " Using javac ............... : $JAVAC" |
| echo " Using Gradle version ...... : $(lib/java/gradlew --version --quiet | grep Gradle 2>&1)" |
| echo " Using java version ........ : $($JAVA -version 2>&1 | grep 'version ')" |
| fi |
| if test "$have_lua" = "yes" ; then |
| echo |
| echo "Lua Library:" |
| echo " Using Lua ................. : $LUA" |
| echo " Using Lua version.......... : $($LUA -v)" |
| fi |
| if test "$have_nodejs" = "yes" ; then |
| echo |
| echo "NodeJS Library:" |
| echo " Using NodeJS .............. : $NODEJS" |
| echo " Using NodeJS version....... : $($NODEJS --version)" |
| fi |
| if test "$have_perl" = "yes" ; then |
| echo |
| echo "Perl Library:" |
| echo " Using Perl ................ : $PERL" |
| echo " Using Perl version ........ : $($PERL -v | grep 'version ')" |
| fi |
| if test "$have_php" = "yes" ; then |
| echo |
| echo "PHP Library:" |
| echo " Using php-config .......... : $PHP_CONFIG" |
| echo " Using php version ......... : $($PHP --version | head -1)" |
| fi |
| if test "$have_python" = "yes" ; then |
| echo |
| echo "Python Library:" |
| echo " Using Python .............. : $PYTHON" |
| echo " Using Python version ...... : $($PYTHON --version 2>&1)" |
| if test "$have_py3" = "yes" ; then |
| echo " Using Python3 ............. : $PYTHON3" |
| echo " Using Python3 version ..... : $($PYTHON3 --version)" |
| fi |
| if test "$have_trial" = "yes"; then |
| echo " Using trial ............... : $TRIAL" |
| fi |
| fi |
| if test "$have_ruby" = "yes" ; then |
| echo |
| echo "Ruby Library:" |
| echo " Using Ruby ................ : $RUBY" |
| echo " Using Ruby version ........ : $($RUBY --version)" |
| fi |
| if test "$have_rs" = "yes" ; then |
| echo |
| echo "Rust Library:" |
| echo " Using Cargo................ : $CARGO" |
| echo " Using rustc................ : $RUSTC" |
| echo " Using Rust version......... : $($RUSTC --version)" |
| fi |
| if test "$have_swift" = "yes" ; then |
| echo |
| echo "Swift Library:" |
| echo " Using Swift ............... : $SWIFT" |
| echo " Using Swift version ....... : $($SWIFT --version | head -1)" |
| fi |
| echo |
| echo "If something is missing that you think should be present," |
| echo "please skim the output of configure to find the missing" |
| echo "component. Details are present in config.log." |
| echo |