<!--
  ~  Licensed to the Apache Software Foundation (ASF) under one
  ~  or more contributor license agreements.  See the NOTICE file
  ~  distributed with this work for additional information
  ~  regarding copyright ownership.  The ASF licenses this file
  ~  to you under the Apache License, Version 2.0 (the
  ~  "License"); you may not use this file except in compliance
  ~  with the License.  You may obtain a copy of the License at
  ~
  ~   http://www.apache.org/licenses/LICENSE-2.0
  ~
  ~  Unless required by applicable law or agreed to in writing,
  ~  software distributed under the License is distributed on an
  ~   * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
  ~  KIND, either express or implied.  See the License for the
  ~  specific language governing permissions and limitations
  ~  under the License.
  -->

<axisconfig name="AxisJava2.0">
    <!-- ================================================= -->
    <!-- Parameters -->
    <!-- ================================================= -->
    <parameter name="hotdeployment" locked="false">true</parameter>
    <parameter name="hotupdate" locked="false">false</parameter>
    <parameter name="enableMTOM" locked="false">false</parameter>
    <parameter name="enableSwA" locked="false">false</parameter>

    <!--Uncomment if you want to enable file caching for attachments -->
    <!--parameter name="cacheAttachments" locked="false">true</parameter>
    <parameter name="attachmentDIR" locked="false"></parameter>
    <parameter name="sizeThreshold" locked="false">4000</parameter-->

    <!--This will give out the timout of the configuration contexts, in seconds-->
    <parameter name="ConfigContextTimeoutInterval" locked="false">30</parameter>

    <!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
    <!--that behaviour.-->
    <parameter name="sendStacktraceDetailsWithFaults" locked="false">true</parameter>

    <!--If there aren't any information available to find out the fault reason, we set the message of the expcetion-->
    <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
    <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
    <!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
    <parameter name="DrillDownToRootCauseForFaultReason" locked="false">false</parameter>


    <parameter name="Sandesha2StorageManager" locked="false">inmemory</parameter>
    <parameter name="userName" locked="false">admin</parameter>
    <parameter name="password" locked="false">axis2</parameter>

    <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
    <!--root which can configured using the following contextRoot parameter-->
    <!--<parameter name="contextRoot" locked="false">axis2</parameter>-->

    <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distingiush those endpoints-->
    <!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
    <!--context path to proper Axis2 servlets-->
    <!--<parameter name="servicePath" locked="false">services</parameter>-->
    <!--<parameter name="restPath" locked="false">rest</parameter>-->


    <!--Set the flag to true if you want to enable transport level session mangment-->
    <parameter name="manageTransportSession" locked="false">false</parameter>

    <!--Following two parameters will be used to handle REST in Axis2. The default settings will make Axis2 to have two-->
    <!--different endpoints, one for REST (AxisRESTServlet) one for SOAP message handling (AxisServlet). But following-->
    <!--parameters help to tweak the message handling of two main servlets. -->

    <!-- If the enableRESTInAxis2MainServlet is true, then Axis2MainServlet will handle both SOAP and REST messages -->
    <parameter name="enableRESTInAxis2MainServlet" locked="true">false</parameter>

    <!-- Following parameter will completely disable REST handling in both the servlets-->
    <parameter name="disableREST" locked="true">false</parameter>

    <!-- This will disable the separate servlet we have for REST handling. -->
    <parameter name="disableSeparateEndpointForREST" locked="true">false</parameter>

    <!-- If you have a frontend host which exposes this webservice using a different public URL  -->
    <!-- use this parameter to override autodetected url -->
    <!--<parameter name="httpFrontendHostUrl" locked="false">https://someotherhost/context</parameter>-->


    <!--    The way of adding listener to the system-->
    <!--    <listener class="org.apache.axis2.ObserverIMPL">-->
    <!--        <parameter name="RSS_URL" locked="false">http://127.0.0.1/rss</parameter>-->
    <!--    </listener>-->

    <!-- ================================================= -->
    <!-- Message Receivers -->
    <!-- ================================================= -->
    <!--This is the Deafult Message Receiver for the system , if you want to have MessageReceivers for -->
    <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
    <!--any operation -->
    <!--Note : You can ovride this for particular service by adding the same element with your requirement-->
    <messageReceivers>
        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
                         class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
                         class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
    </messageReceivers>
    <!-- ================================================= -->
    <!-- Transport Ins -->
    <!-- ================================================= -->
    <!--<transportReceiver name="http"
                       class="org.apache.axis2.transport.http.SimpleHTTPServer">
        <parameter name="port" locked="false">8080</parameter>-->
    <!-- Here is the complete list of supported parameters (see example settings further below):
        port: the port to listen on (default 6060)
        hostname:  if non-null, url prefix used in reply-to endpoint references                                 (default null)
        originServer:  value of http Server header in outgoing messages                                         (default "Simple-Server/1.1")
        requestTimeout:  value in millis of time that requests can wait for data                                (default 20000)
        requestTcpNoDelay:  true to maximize performance and minimize latency                                   (default true)
                            false to minimize bandwidth consumption by combining segments  
        requestCoreThreadPoolSize:  number of threads available for request processing (unless queue fills up)  (default 25)
        requestMaxThreadPoolSize:  number of threads available for request processing if queue fills us         (default 150)
                                   note that default queue never fills up:  see HttpFactory
        threadKeepAliveTime:  time to keep threads in excess of core size alive while inactive                  (default 180)
                              note that no such threads can exist with default unbounded request queue
        threadKeepAliveTimeUnit:  TimeUnit of value in threadKeepAliveTime (default SECONDS)                    (default SECONDS)
    -->
        <!-- <parameter name="hostname"                  locked="false">http://www.myApp.com/ws</parameter> -->
        <!-- <parameter name="originServer"              locked="false">My-Server/1.1</parameter>           -->
        <!-- <parameter name="requestTimeout"            locked="false">10000</parameter>                   -->
        <!-- <parameter name="requestTcpNoDelay"         locked="false">false</parameter>                   -->
        <!-- <parameter name="requestCoreThreadPoolSize" locked="false">50</parameter>                      -->
        <!-- <parameter name="RequestMaxThreadPoolSize"  locked="false">100</parameter>                     -->
        <!-- <parameter name="threadKeepAliveTime"       locked="false">240000</parameter>                  -->
        <!-- <parameter name="threadKeepAliveTimeUnit"   locked="false">MILLISECONDS</parameter>            -->
    <!--</transportReceiver>-->
    
    <!-- the experimental non blocking http transport based on HttpCore + NIO extensions -->
    <transportReceiver name="http" class="org.apache.axis2.transport.nhttp.HttpCoreNIOListener">
    	<parameter name="port" locked="false">8080</parameter>
    	<parameter name="non-blocking" locked="false">true</parameter>
    </transportReceiver>

    <!-- the experimental non blocking https transport based on HttpCore + SSL-NIO extensions -->
    <transportReceiver name="https" class="org.apache.axis2.transport.nhttp.HttpCoreNIOSSLListener">
    	<parameter name="port" locked="false">8443</parameter>
    	<parameter name="non-blocking" locked="false">true</parameter>
        <parameter name="keystore" locked="false">
            <KeyStore>
                <Location>keystore.jks</Location>
                <Type>JKS</Type>
                <Password>password</Password>
                <KeyPassword>password</KeyPassword>
            </KeyStore>
        </parameter>
        <parameter name="truststore" locked="false">
            <TrustStore>
                <Location>keystore.jks</Location>
                <Type>JKS</Type>
                <Password>password</Password>
            </TrustStore>
        </parameter>                        
    </transportReceiver>

    <!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
    <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
        <parameter name="myTopicConnectionFactory" locked="false">        	        	
        	<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
        	<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>        	
        	<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">TopicConnectionFactory</parameter>
        </parameter>

        <parameter name="myQueueConnectionFactory" locked="false">        	        	
        	<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
        	<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>        	
        	<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
        </parameter>

        <parameter name="default" locked="false">        	        	
        	<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
        	<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>        	
        	<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
        </parameter>
    </transportReceiver>-->

    <!--Uncomment if you want to have SMTP transport support-->
    <!--<transportReceiver name="mail" class="org.apache.axis2.transport.mail.SimpleMailListener">-->
    <!--<parameter name="transport.mail.pop3.host" locked="false">127.0.0.1</parameter>-->
    <!--<parameter name="transport.mail.pop3.user" locked="false">axis2</parameter>-->
    <!--<parameter name="transport.mail.pop3.password" locked="false">axis2</parameter>-->
    <!--<parameter name="transport.mail.pop3.port" locked="false">110</parameter>-->
    <!--<parameter name="transport.mail.replyToAddress" locked="false">axis2@127.0.0.1</parameter>-->
    <!--</transportReceiver>-->

    <!--<transportReceiver name="tcp"-->
                       <!--class="org.apache.axis2.transport.tcp.TCPServer">-->
        <!--<parameter name="port" locked="false">6060</parameter>-->
        <!--If you want to give your own host address for EPR generation-->
        <!--uncommet following paramter , and set as you required.-->
        <!--<parameter name="hostname" locked="false">tcp://myApp.com/ws</parameter>-->
    <!--</transportReceiver>-->

    <!-- ================================================= -->
    <!-- Transport Outs -->
    <!-- ================================================= -->

    <transportSender name="tcp"   class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
    <transportSender name="local" class="org.apache.axis2.transport.local.LocalTransportSender"/>
    <transportSender name="jms"   class="org.apache.axis2.transport.jms.JMSSender"/>    
    <!-- the experimental non-blocking http transport based on HttpCore + NIO extensions -->
    <transportSender name="http"  class="org.apache.axis2.transport.nhttp.HttpCoreNIOSender">
        <parameter name="non-blocking" locked="false">true</parameter>
    </transportSender>
    <transportSender name="https" class="org.apache.axis2.transport.nhttp.HttpCoreNIOSSLSender">
        <parameter name="non-blocking" locked="false">true</parameter>
        <parameter name="keystore" locked="false">
            <KeyStore>
                <Location>keystore.jks</Location>
                <Type>JKS</Type>
                <Password>password</Password>
                <KeyPassword>password</KeyPassword>
            </KeyStore>
        </parameter>
        <parameter name="truststore" locked="false">
            <TrustStore>
                <Location>keystore.jks</Location>
                <Type>JKS</Type>
                <Password>password</Password>
            </TrustStore>
        </parameter>                
    </transportSender>

    <!-- Uncomment this one with the appropriate papameters to enable the SMTP transport Receiver
   <transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
       <parameter name="transport.mail.smtp.host" locked="false">127.0.0.1</parameter>
       <parameter name="transport.mail.smtp.user" locked="false">axis2</parameter>
       <parameter name="transport.mail.smtp.password" locked="false">axis2</parameter>
       <parameter name="transport.mail.smtp.port" locked="false">25</parameter>
   </transportSender>
   -->

    <!-- ================================================= -->
    <!-- Global Modules  -->
    <!-- ================================================= -->
    <!-- Comment this to disable Addressing -->
    <module ref="addressing"/>
    <module ref="synapse"/>

    <!--Configuring module , providing parameters for modules whether they refer or not-->
    <!--<moduleConfig name="addressing">-->
    <!--<parameter name="addressingPara" locked="false">N/A</parameter>-->
    <!--</moduleConfig>-->

    <!-- ================================================= -->
    <!-- Phases  -->
    <!-- ================================================= -->
    <phaseOrder type="InFlow">
        <!--  System pre defined phases       -->
         <phase name="Transport">
            <handler name="RequestURIBasedDispatcher"
                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
                <order phase="Transport"/>
            </handler>
            <handler name="SOAPActionBasedDispatcher"
                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
                <order phase="Transport"/>
            </handler>
        </phase>
        <phase name="Security"/>
        <phase name="PreDispatch"/>
        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
            <handler name="AddressingBasedDispatcher"
                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>

            <handler name="SOAPMessageBodyBasedDispatcher"
                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>
            <handler name="InstanceDispatcher"
                     class="org.apache.axis2.engine.InstanceDispatcher">
                <order phase="Dispatch"/>
            </handler>
        </phase>
        <!--  System pre defined phases       -->
        <phase name="RMPhase"/>
        <!--   After Postdispatch phase module author or or service author can add any phase he want      -->
        <phase name="OperationInPhase"/>
    </phaseOrder>
    <phaseOrder type="OutFlow">
        <!--      user can add his own phases to this area  -->
        <phase name="RMPhase"/>
        <phase name="OperationOutPhase"/>
        <!--system predefined phase-->
        <!--these phase will run irrespective of the service-->
        <phase name="PolicyDetermination"/>
        <phase name="MessageOut"/>
        <phase name="Security"/>
    </phaseOrder>
    <phaseOrder type="InFaultFlow">
        <phase name="PreDispatch"/>
        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
            <handler name="RequestURIBasedDispatcher"
                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>

            <handler name="SOAPActionBasedDispatcher"
                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>

            <handler name="AddressingBasedDispatcher"
                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>

            <handler name="SOAPMessageBodyBasedDispatcher"
                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
                <order phase="Dispatch"/>
            </handler>
            <handler name="InstanceDispatcher"
                     class="org.apache.axis2.engine.InstanceDispatcher">
                <order phase="PostDispatch"/>
            </handler>
        </phase>
        <!--      user can add his own phases to this area  -->
        <phase name="RMPhase"/>
        <phase name="OperationInFaultPhase"/>
    </phaseOrder>
    <phaseOrder type="OutFaultFlow">
        <!--      user can add his own phases to this area  -->
        <phase name="RMPhase"/>
        <phase name="OperationOutFaultPhase"/>
        <phase name="PolicyDetermination"/>
        <phase name="MessageOut"/>
    </phaseOrder>
</axisconfig>