| <!-- |
| ~ Licensed to the Apache Software Foundation (ASF) under one |
| ~ or more contributor license agreements. See the NOTICE file |
| ~ distributed with this work for additional information |
| ~ regarding copyright ownership. The ASF licenses this file |
| ~ to you under the Apache License, Version 2.0 (the |
| ~ "License"); you may not use this file except in compliance |
| ~ with the License. You may obtain a copy of the License at |
| ~ |
| ~ http://www.apache.org/licenses/LICENSE-2.0 |
| ~ |
| ~ Unless required by applicable law or agreed to in writing, |
| ~ software distributed under the License is distributed on an |
| ~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| ~ KIND, either express or implied. See the License for the |
| ~ specific language governing permissions and limitations |
| ~ under the License. |
| --> |
| |
| <axisconfig name="AxisJava2.0"> |
| <!-- ================================================= --> |
| <!-- Parameters --> |
| <!-- ================================================= --> |
| |
| <!-- WARNING: Hot deployment is turned on by default, but it is highly recommended to set this to false |
| on production environments, unless you really want to use hot deployment in production --> |
| <parameter name="hotdeployment">true</parameter> |
| <parameter name="hotupdate">true</parameter> |
| <parameter name="enableMTOM">false</parameter> |
| <parameter name="enableSwA">false</parameter> |
| |
| <!--Uncomment if you want to enable file caching for attachments --> |
| <!--parameter name="cacheAttachments">true</parameter> |
| <parameter name="attachmentDIR"></parameter> |
| <parameter name="sizeThreshold">4000</parameter--> |
| |
| <!--This will give out the timout of the configuration contexts, in milliseconds--> |
| <parameter name="ConfigContextTimeoutInterval">30000</parameter> |
| |
| <!--During a fault, stacktrace can be sent with the fault message. The following flag will control --> |
| <!--that behavior.--> |
| <parameter name="sendStacktraceDetailsWithFaults">false</parameter> |
| |
| <!--If there aren't any information available to find out the fault reason, we set the message of the exception--> |
| <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be --> |
| <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag--> |
| <!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.--> |
| <parameter name="DrillDownToRootCauseForFaultReason">false</parameter> |
| |
| <parameter name="userName">admin</parameter> |
| <parameter name="password">axis2</parameter> |
| |
| <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.--> |
| <!--ServicesDirectory only works on the following cases--> |
| <!---File based configurator and in that case the value should be a file URL (http:// not allowed)--> |
| <!---When creating URL Based configurator with URL "file://" --> |
| <!--- War based configurator with expanded case , --> |
| |
| <!--All the other scenarios it will be ignored.--> |
| <!--<parameter name="ServicesDirectory">service</parameter>--> |
| <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path--> |
| <!--<parameter name="ModulesDirectory">modules</parameter>--> |
| |
| |
| |
| <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context--> |
| <!--root which can configured using the following contextRoot parameter--> |
| <parameter name="contextRoot">/</parameter> |
| |
| <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints--> |
| <!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this --> |
| <!--context path to proper Axis2 servlets--> |
| <parameter name="servicePath">services</parameter> |
| <parameter name="restPath">rest</parameter> |
| |
| <!-- Following parameter will completely disable REST handling in Axis2--> |
| <parameter name="disableREST" locked="true">false</parameter> |
| |
| <!-- Extension deployer |
| ***** Uncomment the following line to enable (hot) deployment of Synapse extensions (mediators and startups) ***** --> |
| <!--<deployer extension="xar" directory="extensions" class="org.apache.synapse.deployers.ExtensionDeployer"/>--> |
| |
| <!-- WARNING: Synapse Artifact Deployers, it is highly recommended to comment out these deployers in production |
| unless you really want to use hot deployment/update --> |
| <deployer extension="xml" directory="conf/synapse-config/sequences" class="org.apache.synapse.deployers.SequenceDeployer"/> |
| <deployer extension="xml" directory="conf/synapse-config/endpoints" class="org.apache.synapse.deployers.EndpointDeployer"/> |
| <deployer extension="xml" directory="conf/synapse-config/local-entries" class="org.apache.synapse.deployers.LocalEntryDeployer"/> |
| <deployer extension="xml" directory="conf/synapse-config/proxy-services" class="org.apache.synapse.deployers.ProxyServiceDeployer"/> |
| <deployer extension="xml" directory="conf/synapse-config/event-sources" class="org.apache.synapse.deployers.EventSourceDeployer"/> |
| <deployer extension="xml" directory="conf/synapse-config/tasks" class="org.apache.synapse.deployers.TaskDeployer"/> |
| <deployer extension="xml" directory="conf/synapse-config/priority-executors" class="org.apache.synapse.deployers.PriorityExecutorDeployer"/> |
| <deployer extension="xml" directory="conf/synapse-config/templates" class="org.apache.synapse.deployers.TemplateDeployer"/> |
| <deployer extension="xml" directory="conf/synapse-config/message-stores" class="org.apache.synapse.deployers.MessageStoreDeployer"/> |
| <deployer extension="xml" directory="conf/synapse-config/message-processors" class="org.apache.synapse.deployers.MessageProcessorDeployer"/> |
| <deployer extension="xml" directory="conf/synapse-config/api" class="org.apache.synapse.deployers.APIDeployer"/> |
| |
| <!-- Following parameter will set the host name for the epr--> |
| <!--<parameter name="hostname" locked="true">myhost.com</parameter>--> |
| |
| <!-- If you have a frontend host which exposes this webservice using a different public URL --> |
| <!-- use this parameter to override autodetected url --> |
| <!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>--> |
| |
| |
| <!-- The way of adding listener to the system--> |
| <!-- <listener class="org.apache.axis2.ObserverIMPL">--> |
| <!-- <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>--> |
| <!-- </listener>--> |
| |
| <!-- ================================================= --> |
| <!-- Message Receivers --> |
| <!-- ================================================= --> |
| <!--This is the deafult MessageReceiver for the system , if you want to have MessageReceivers for --> |
| <!--all the other MEP implement it and add the correct entry to here , so that you can refer from--> |
| <!--any operation --> |
| <!--Note : You can ovrride this for a particular service by adding the same element with your requirement--> |
| <messageReceivers> |
| <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only" |
| class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/> |
| <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out" |
| class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/> |
| <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only" |
| class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/> |
| <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out" |
| class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/> |
| </messageReceivers> |
| |
| <!-- ================================================= --> |
| <!-- Message Formatter --> |
| <!-- ================================================= --> |
| <!--Following content type to message formatter mapping can be used to implement support for different message --> |
| <!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. --> |
| <messageFormatters> |
| <messageFormatter contentType="application/x-www-form-urlencoded" |
| class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/> |
| <messageFormatter contentType="multipart/form-data" |
| class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/> |
| <messageFormatter contentType="application/xml" |
| class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/> |
| <!--<messageFormatter contentType="x-application/hessian" |
| class="org.apache.synapse.format.hessian.HessianMessageFormatter"/>--> |
| <!--<messageFormatter contentType="" |
| class="org.apache.synapse.format.hessian.HessianMessageFormatter"/>--> |
| <!--<messageFormatter contentType="application/json" |
| class="org.apache.axis2.json.JSONMessageFormatter"/>--> |
| |
| </messageFormatters> |
| |
| <!-- ================================================= --> |
| <!-- Message Builders --> |
| <!-- ================================================= --> |
| <!--Following content type to builder mapping can be used to implement support for different message --> |
| <!--formats in Axis2. These message formats are expected to be resolved based on the content type. --> |
| <messageBuilders> |
| <messageBuilder contentType="application/xml" |
| class="org.apache.axis2.builder.ApplicationXMLBuilder"/> |
| <messageBuilder contentType="application/x-www-form-urlencoded" |
| class="org.apache.axis2.builder.XFormURLEncodedBuilder"/> |
| <messageBuilder contentType="multipart/form-data" |
| class="org.apache.axis2.builder.MultipartFormDataBuilder"/> |
| <!--<messageBuilder contentType="x-application/hessian" |
| class="org.apache.synapse.format.hessian.HessianMessageBuilder"/>--> |
| <!--<messageBuilder contentType="" |
| class="org.apache.synapse.format.hessian.HessianMessageBuilder"/>--> |
| <!--<messageBuilder contentType="application/json" |
| class="org.apache.axis2.json.JSONOMBuilder"/>--> |
| </messageBuilders> |
| |
| <!-- ================================================= --> |
| <!-- Transport Ins --> |
| <!-- ================================================= --> |
| <!-- the non blocking http transport based on HttpCore + NIO extensions --> |
| <transportReceiver name="http" class="org.apache.synapse.transport.nhttp.HttpCoreNIOListener"> |
| <parameter name="port">8280</parameter> |
| <parameter name="non-blocking">true</parameter> |
| <!--parameter name="bind-address" locked="false">hostname or IP address</parameter--> |
| <!--parameter name="WSDLEPRPrefix" locked="false">https://apachehost:port/somepath</parameter--> |
| <!-- paramter name="priorityConfigFile" locked="false">location of priority configuration file<parameter--> |
| </transportReceiver> |
| |
| <!-- the non blocking https transport based on HttpCore + SSL-NIO extensions --> |
| <transportReceiver name="https" class="org.apache.synapse.transport.nhttp.HttpCoreNIOSSLListener"> |
| <parameter name="port" locked="false">8243</parameter> |
| <!--parameter name="bind-address" locked="false">hostname or IP address</parameter--> |
| <!--parameter name="WSDLEPRPrefix" locked="false">http://apachehost:port/somepath</parameter--> |
| <parameter name="non-blocking" locked="false">true</parameter> |
| <parameter name="keystore" locked="false"> |
| <KeyStore> |
| <Location>lib/identity.jks</Location> |
| <Type>JKS</Type> |
| <Password>password</Password> |
| <KeyPassword>password</KeyPassword> |
| </KeyStore> |
| </parameter> |
| <parameter name="truststore" locked="false"> |
| <TrustStore> |
| <Location>lib/trust.jks</Location> |
| <Type>JKS</Type> |
| <Password>password</Password> |
| </TrustStore> |
| </parameter> |
| <!--<parameter name="SSLVerifyClient">require</parameter> |
| supports optional|require or defaults to none --> |
| </transportReceiver> |
| |
| <!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ) |
| <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener"> |
| <parameter name="myTopicConnectionFactory"> |
| <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> |
| <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter> |
| <parameter name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</parameter> |
| <parameter name="transport.jms.ConnectionFactoryType" locked="false">topic</parameter> |
| </parameter> |
| |
| <parameter name="myQueueConnectionFactory"> |
| <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> |
| <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter> |
| <parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter> |
| <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter> |
| </parameter> |
| |
| <parameter name="default"> |
| <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> |
| <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter> |
| <parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter> |
| <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter> |
| </parameter> |
| </transportReceiver>--> |
| |
| <transportReceiver name="vfs" class="org.apache.synapse.transport.vfs.VFSTransportListener"/> |
| |
| <transportReceiver name="mailto" class="org.apache.axis2.transport.mail.MailTransportListener"> |
| <!-- configure any optional POP3/IMAP properties |
| check com.sun.mail.pop3 and com.sun.mail.imap package documentation for more details--> |
| </transportReceiver> |
| |
| <!--Uncomment this for FIX transport support |
| <transportReceiver name="fix" class="org.apache.synapse.transport.fix.FIXTransportListener"> |
| <parameter name="non-blocking">true</parameter> |
| </transportReceiver>--> |
| |
| <!--Uncomment this for TCP transport support |
| <transportReceiver name="tcp" class="org.apache.axis2.transport.tcp.TCPServer"> |
| <parameter name="port">6060</parameter> |
| </transportReceiver>--> |
| |
| <!--Uncomment this for UDP transport support |
| <transportReceiver name="udp" class="org.apache.axis2.transport.udp.UDPListener"/>--> |
| |
| <!-- ================================================= --> |
| <!-- Transport Outs --> |
| <!-- ================================================= --> |
| |
| <transportSender name="http" class="org.apache.synapse.transport.nhttp.HttpCoreNIOSender"> |
| <parameter name="non-blocking" locked="false">true</parameter> |
| <parameter name="warnOnHTTP500" locked="false">*</parameter> |
| <!--parameter name="http.proxyHost" locked="false">localhost</parameter> |
| <parameter name="http.proxyPort" locked="false">3128</parameter> |
| <parameter name="http.nonProxyHosts" locked="false">localhost|moon|sun</parameter--> |
| </transportSender> |
| <transportSender name="https" class="org.apache.synapse.transport.nhttp.HttpCoreNIOSSLSender"> |
| <parameter name="non-blocking" locked="false">true</parameter> |
| <parameter name="warnOnHTTP500" locked="false">*</parameter> |
| <parameter name="keystore" locked="false"> |
| <KeyStore> |
| <Location>lib/identity.jks</Location> |
| <Type>JKS</Type> |
| <Password>password</Password> |
| <KeyPassword>password</KeyPassword> |
| </KeyStore> |
| </parameter> |
| <parameter name="truststore" locked="false"> |
| <TrustStore> |
| <Location>lib/trust.jks</Location> |
| <Type>JKS</Type> |
| <Password>password</Password> |
| </TrustStore> |
| </parameter> |
| <!--<parameter name="HostnameVerifier">DefaultAndLocalhost</parameter> |
| supports Strict|AllowAll|DefaultAndLocalhost or the default if none specified --> |
| </transportSender> |
| |
| <!-- Uncomment Transport sender for the non blocking local transport--> |
| <!--transportSender name="local" class="org.apache.axis2.transport.local.NonBlockingLocalTransportSender"/--> |
| |
| <transportSender name="jms" class="org.apache.axis2.transport.jms.JMSSender"> |
| <!-- uncomment this and configure to use connection pools for sending messages |
| <parameter name="myTopicConnectionFactory"> |
| <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> |
| <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter> |
| <parameter name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</parameter> |
| </parameter> |
| |
| <parameter name="myQueueConnectionFactory"> |
| <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> |
| <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter> |
| <parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter> |
| </parameter> |
| |
| <parameter name="default"> |
| <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> |
| <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter> |
| <parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter> |
| </parameter> --> |
| </transportSender> |
| |
| <transportSender name="vfs" class="org.apache.synapse.transport.vfs.VFSTransportSender"/> |
| |
| <!-- Uncomment and configure the SMTP server information |
| check com.sun.mail.smtp package documentation for descriptions of properties |
| <transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender"> |
| <parameter name="mail.smtp.host">smtp.gmail.com</parameter> |
| <parameter name="mail.smtp.port">587</parameter> |
| <parameter name="mail.smtp.starttls.enable">true</parameter> |
| <parameter name="mail.smtp.auth">true</parameter> |
| <parameter name="mail.smtp.user">synapse.demo.0</parameter> |
| <parameter name="mail.smtp.password">mailpassword</parameter> |
| <parameter name="mail.smtp.from">synapse.demo.0@gmail.com</parameter> |
| </transportSender>--> |
| |
| <!--Uncomment this for FIX transport support |
| <transportSender name="fix" class="org.apache.synapse.transport.fix.FIXTransportSender"> |
| <parameter name="non-blocking">true</parameter> |
| </transportSender>--> |
| |
| <!--Uncomment this for TCP transport support |
| <transportSender name="tcp" class="org.apache.axis2.transport.tcp.TCPTransportSender"/>--> |
| |
| <!--Uncomment this for UDP transport support |
| <transportSender name="udp" class="org.apache.axis2.transport.udp.UDPSender"/>--> |
| |
| <!-- ================================================= --> |
| <!-- Global Modules --> |
| <!-- ================================================= --> |
| <!-- Comment this to disable Addressing --> |
| <module ref="addressing"/> |
| |
| <!--Configuring module , providing parameters for modules whether they refer or not--> |
| <!--<moduleConfig name="addressing">--> |
| <!--<parameter name="addressingPara">N/A</parameter>--> |
| <!--</moduleConfig>--> |
| |
| <!-- ================================================= --> |
| <!-- Clustering --> |
| <!-- ================================================= --> |
| <!-- Configure the following for preparing Synapse to a clustered environment --> |
| <clustering class="org.apache.axis2.clustering.tribes.TribesClusteringAgent" enable="false"> |
| |
| <!-- |
| This parameter indicates whther the cluster has to be automatically initalized |
| when the AxisConfiguration is built. If set to "true" the initialization will not be |
| done at that stage, and some other party will have to explictly initialize the cluster. |
| --> |
| <parameter name="AvoidInitiation">false</parameter> |
| |
| <!-- |
| The membership scheme used in this setup. The only values supported at the moment are |
| "multicast" and "wka" |
| |
| 1. multicast - membership is automatically discovered using multicasting |
| 2. wka - Well-Known Address based multicasting. Membership is discovered with the help |
| of one or more nodes running at a Well-Known Address. New members joining a |
| cluster will first connect to a well-known node, register with the well-known node |
| and get the membership list from it. When new members join, one of the well-known |
| nodes will notify the others in the group. When a member leaves the cluster or |
| is deemed to have left the cluster, it will be detected by the Group Membership |
| Service (GMS) using a TCP ping mechanism. |
| --> |
| <parameter name="membershipScheme">multicast</parameter> |
| |
| <!-- |
| The clustering domain/group. Nodes in the same group will belong to the same multicast |
| domain. There will not be interference between nodes in different groups. |
| --> |
| <parameter name="domain">apache.synapse.domain</parameter> |
| |
| <!-- |
| When a Web service request is received, and processed, before the response is sent to the |
| client, should we update the states of all members in the cluster? If the value of |
| this parameter is set to "true", the response to the client will be sent only after |
| all the members have been updated. Obviously, this can be time consuming. In some cases, |
| such this overhead may not be acceptable, in which case the value of this parameter |
| should be set to "false" |
| --> |
| <parameter name="synchronizeAll">true</parameter> |
| |
| <!-- |
| The maximum number of times we need to retry to send a message to a particular node |
| before giving up and considering that node to be faulty |
| --> |
| <parameter name="maxRetries">10</parameter> |
| |
| <!-- The multicast address to be used --> |
| <parameter name="mcastAddress">228.0.0.4</parameter> |
| |
| <!-- The multicast port to be used --> |
| <parameter name="mcastPort">45564</parameter> |
| |
| <!-- The frequency of sending membership multicast messages (in ms) --> |
| <parameter name="mcastFrequency">500</parameter> |
| |
| <!-- The time interval within which if a member does not respond, the member will be |
| deemed to have left the group (in ms) |
| --> |
| <parameter name="memberDropTime">3000</parameter> |
| |
| <!-- |
| The IP address of the network interface to which the multicasting has to be bound to. |
| Multicasting would be done using this interface. |
| --> |
| <parameter name="mcastBindAddress">127.0.0.1</parameter> |
| |
| <!-- The host name or IP address of this member --> |
| <parameter name="localMemberHost">127.0.0.1</parameter> |
| |
| <!-- |
| The TCP port used by this member. This is the port through which other nodes will |
| contact this member |
| --> |
| <parameter name="localMemberPort">4000</parameter> |
| |
| <!-- |
| The list of static or well-known members. These entries will only be valid if the |
| "membershipScheme" above is set to "wka" |
| --> |
| <members> |
| <member> |
| <hostName>127.0.0.1</hostName> |
| <port>4000</port> |
| </member> |
| <member> |
| <hostName>127.0.0.1</hostName> |
| <port>4001</port> |
| </member> |
| </members> |
| |
| <!-- |
| Enable the groupManagement entry if you need to run this node as a cluster manager. |
| Multiple application domains with different GroupManagementAgent implementations |
| can be defined in this section. |
| --> |
| <groupManagement enable="false"> |
| <applicationDomain name="apache.axis2.app.domain" |
| description="Axis2 group" |
| agent="org.apache.axis2.clustering.management.DefaultGroupManagementAgent"/> |
| </groupManagement> |
| |
| <!-- |
| This interface is responsible for handling context replication. The property changes in |
| the Axis2 context hierarchy in this node, are propagated to all other nodes in the cluster. |
| |
| The "excludes" patterns can be used to specify the prefixes (e.g. local_*) or |
| suffixes (e.g. *_local) of the properties to be excluded from replication. The pattern |
| "*" indicates that all properties in a particular context should not be replicated. |
| |
| The "enable" attribute indicates whether context replication has been enabled |
| --> |
| <contextManager class="org.apache.axis2.clustering.context.DefaultContextManager" |
| enable="false"> |
| <listener class="org.apache.axis2.clustering.context.DefaultContextManagerListener"/> |
| <replication> |
| <defaults> |
| <exclude name="local_*"/> |
| <exclude name="LOCAL_*"/> |
| </defaults> |
| <context class="org.apache.axis2.context.ConfigurationContext"> |
| <exclude name="UseAsyncOperations"/> |
| <exclude name="SequencePropertyBeanMap"/> |
| </context> |
| <context class="org.apache.axis2.context.ServiceGroupContext"> |
| <exclude name="my.sandesha.*"/> |
| </context> |
| <context class="org.apache.axis2.context.ServiceContext"> |
| <exclude name="my.sandesha.*"/> |
| </context> |
| </replication> |
| </contextManager> |
| </clustering> |
| |
| <!-- ================================================= --> |
| <!-- Phases --> |
| <!-- ================================================= --> |
| <phaseOrder type="InFlow"> |
| <!-- System pre defined phases --> |
| <phase name="Transport"> |
| <handler name="RequestURIBasedDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"> |
| <order phase="Transport"/> |
| </handler> |
| <handler name="SOAPActionBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"> |
| <order phase="Transport"/> |
| </handler> |
| </phase> |
| <phase name="Addressing"> |
| <handler name="AddressingBasedDispatcher" |
| class="org.apache.axis2.dispatchers.AddressingBasedDispatcher"> |
| <order phase="Addressing"/> |
| </handler> |
| </phase> |
| <phase name="Security"/> |
| <phase name="PreDispatch"/> |
| <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase"> |
| <handler name="CustomURIBasedDispatcher" |
| class="org.apache.synapse.core.axis2.CustomURIBasedDispatcher"/> |
| <handler name="RequestURIBasedDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/> |
| <handler name="SOAPActionBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/> |
| <handler name="RequestURIOperationDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/> |
| <handler name="SOAPMessageBodyBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/> |
| |
| <handler name="HTTPLocationBasedDispatcher" |
| class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/> |
| </phase> |
| <phase name="RMPhase"/> |
| <!-- System predefined phases --> |
| <!-- After Postdispatch phase module author or service author can add any phase he want --> |
| <phase name="OperationInPhase"/> |
| <phase name="soapmonitorPhase"/> |
| </phaseOrder> |
| <phaseOrder type="OutFlow"> |
| <!-- user can add his own phases to this area --> |
| <phase name="soapmonitorPhase"/> |
| <phase name="OperationOutPhase"/> |
| <!--system predefined phase--> |
| <!--these phase will run irrespective of the service--> |
| <phase name="RMPhase"/> |
| <phase name="PolicyDetermination"/> |
| <phase name="MessageOut"/> |
| <phase name="Security"/> |
| </phaseOrder> |
| <phaseOrder type="InFaultFlow"> |
| <phase name="Addressing"> |
| <handler name="AddressingBasedDispatcher" |
| class="org.apache.axis2.dispatchers.AddressingBasedDispatcher"> |
| <order phase="Addressing"/> |
| </handler> |
| </phase> |
| <phase name="Security"/> |
| <phase name="PreDispatch"/> |
| <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase"> |
| <handler name="RequestURIBasedDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/> |
| <handler name="SOAPActionBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/> |
| <handler name="RequestURIOperationDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/> |
| <handler name="SOAPMessageBodyBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/> |
| |
| <handler name="HTTPLocationBasedDispatcher" |
| class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/> |
| </phase> |
| <phase name="RMPhase"/> |
| <!-- user can add his own phases to this area --> |
| <phase name="OperationInFaultPhase"/> |
| <phase name="soapmonitorPhase"/> |
| </phaseOrder> |
| <phaseOrder type="OutFaultFlow"> |
| <!-- user can add his own phases to this area --> |
| <phase name="soapmonitorPhase"/> |
| <phase name="OperationOutFaultPhase"/> |
| <phase name="RMPhase"/> |
| <phase name="PolicyDetermination"/> |
| <phase name="MessageOut"/> |
| <phase name="Security"/> |
| </phaseOrder> |
| </axisconfig> |
