svntest scripts                                           -*- Text -*-
===============

This set of scripts is designed to wrap execution of all of
Subversion's Makefile test targets (e.g. "check", "davcheck",
"svncheck", etc.).


Usage
=====

1) Read the INSTALL (http://svn.collab.net/repos/svn/trunk/INSTALL)
   file, especially the sections about bootstrapping from a tarball
   and getting the latest APR-0.9, APR-UTIL-0.9 and httpd-2.0 sources.
   Check out and compile the latest Subversion. You could easily run
   svntest.sh against APR/APR-UTIL 1.0 and HTTPD 2.1 branches, just 
   checkout corresponding repositories, and edit svntest-config.sh.

2) Copy the svntest scripts from trunk/tools/test-scripts/svntest to
   somewhere outside the repository. Then read and modify
   svntest-config.sh to reflect your local installation. Take special
   care about program locations, program installation locations and
   e-mail addresses. The svn-breakage list has to be subscribed by the 
   same address that is put to FROM variable. Otherwise report emails
   will disappear to the black hole of the bits.

   Also notice that this test script will wipe out following paths
   during rebuilding:
   $INST_DIR/<proj_name>, ie. with present configuration the paths are: 
   /home/YOUR_USERNAME/svn/inst/{apr-0.9,apr-util-0.9,httpd-2.0,svn}

3) Create one or more scripts that configure Subversion in different
   ways (e.g., configure.shared, configure.static). Here's the script
   I'm using for static builds on Solaris 7:

    config.apr-0.9:
    #!/bin/sh

    "../apr-0.9/configure" \
    "--prefix=/home/YOUR_USERNAME/svn/inst/apr-0.9" \
    "--with-pic" \
    "$@"


    config.apr-util-0.9:
    #!/bin/sh

    "../apr-util-0.9/configure" \
    "--prefix=/home/YOUR_USERNAME/svn/inst/apr-util-0.9" \
    "--with-apr=/home/YOUR_USERNAME/svn/inst/apr-0.9" \
    "--with-pic" \
    "--with-dbm=db4" \
    "--with-berkeley-db" \
    "--with-expat=/usr" \
    "$@"


    config.httpd-2.0:
    #!/bin/sh
    
    CURR_WD="`pwd`"
    cd ../httpd-2.0

    "./buildconf" \
    "--with-apr=/home/YOUR_USERNAME/svn/apr-0.9" \
    "--with-apr-util=/home/YOUR_USERNAME/svn/apr-util-0.9"

    cd "$CURR_WD"

    "../httpd-2.0/configure" \
    "--prefix=/home/YOUR_USERNAME/svn/inst/httpd-2.0" \
    "--with-apr=/home/YOUR_USERNAME/svn/inst/apr-0.9/bin/apr-config" \
    "--with-apr-util=/home/YOUR_USERNAME/svn/inst/apr-util-0.9/bin/apu-config" \
    "--enable-dav" \
    "$@"
    
    
    config.solaris.static (for subversion):
    #!/bin/sh
    env CC='gcc' \
       "../svn/configure" \
       "--prefix=/home/YOUR_USERNAME/svn/inst" \
       "--with-berkeley-db=/home/YOUR_USERNAME/svn/db4" \
       "--with-apr=/home/YOUR_USERNAME/svn/inst/apr-0.9/bin/apr-config" \
       "--with-apr-util=/home/YOUR_USERNAME/svn/inst/apr-util-0.9/bin/apu-config" \
       "--with-apxs=/home/YOUR_USERNAME/svn/inst/httpd-2.0/bin/apxs" \
       "--disable-shared" \
       "$@"

   At the moment, svntest-rebuild.sh will only recognize shared and
   static build types, but you can easily change that. If you do, also
   change svntest.sh so that it tests all the different configurations.

4) Tailor your $HTTPD_NAME.conf (ie. httpd-2.0.conf) to suit 
   your needs, (easiest way to get a template for http-2.0.conf is 
   install Apache httpd at once, and after that copy installed httpd.conf, and
   edit it). Things to change are probably: 

   i)   Listen 127.0.0.1:52080
   ii)  LoadModule dav_svn_module     modules/mod_dav_svn.so
   iii) User YOUR_USERNAME
        Group YOUR_GROUPNAME
   v)   ServerName localhost:52080
   vi)  Add mod_dav_svn block to the $HTTPD_NAME.conf:
    
        <IfModule mod_dav_svn.c>
           Include conf/mod_dav_svn.conf
        </IfModule>

   vii) Check and fix the content of mod_dav_svn.conf

        The actual name of the used mod_dav_svn conf file is
        mod_dav_${SVN_NAME}.conf, which is mod_dav_svn.conf with
        default settings.

        If you like to run regression tests for 1.1.x or 1.2.x with
        the same svntest setup, you have to change the name of
        SVN_NAME variable, and you have to generate two additional
        mod_dav_svn conf files:

        sed 's!/svn-test-work!!' mod_dav_svn.conf > mod_dav_svn_1.2.x.conf
        sed 's!/svn-test-work!!' mod_dav_svn.conf > mod_dav_svn_1.1.x.conf
        
        and set SVN_NAME=svn_1.2.x for 1.2.x, and SVN_NAME=svn_1.1.x
        for 1.1.x.


   Don't ever touch config files under $INST_DIR/$HTTPD_NAME/conf, they will be overwritten by
   the script.
   
5) Make sure your environment (e.g., LD_LIBRARY_PATH) is set correctly
   to find Berkeley DB, etc.

6) Test execution can be dramatically sped up by keeping Subversion
   test data on a RAM disk.  On a Linux system, add lines like the
   following in your /etc/fstab file:

   tmpfs  /home/YOUR_USERNAME/svn/obj-sh/subversion/tests  tmpfs  defaults,user,noauto,exec,size=64m
   tmpfs  /home/YOUR_USERNAME/svn/obj-st/subversion/tests  tmpfs  defaults,user,noauto,exec,size=64m

   The minimum required size for testing RAM disk is actually many
   times greater than shown above.  However, svntest will
   automatically flag your test targets for cleanup when using a
   ramdisk, which dramatically reduces the space requirement.

   To enable RAM disk usage by svntest, set RAMDISK=yes, and check
   mount_ramdisk and umount_ramdisk in the svntest-config.sh file if
   your system is not GNU/Linux.  See
   http://subversion.tigris.org/faq.html#ramdisk-tests for further
   information.
   
7) Run svntest.sh to get the latest versions of ARP, APR-UTIL, HTTPPD and
   Subversion, build and test all the configurations. 

8) If you like force rebuilding of some component, you could do:
   echo "0" > $PROJ_REPO.rb, dependencies are:
   apr-util depends on apr, and httpd depends on apr and apr-util.
   Any dependent project will be also rebuild.
   When you run this script first time, everything will be rebuilt 
   automatically.

======================================================
Need more detailed instructions? Use the Source, Luke!