#
# Makefile.in:  template Makefile for Subversion
#
# ====================================================================
#    Licensed to the Apache Software Foundation (ASF) under one
#    or more contributor license agreements.  See the NOTICE file
#    distributed with this work for additional information
#    regarding copyright ownership.  The ASF licenses this file
#    to you under the Apache License, Version 2.0 (the
#    "License"); you may not use this file except in compliance
#    with the License.  You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
#    Unless required by applicable law or agreed to in writing,
#    software distributed under the License is distributed on an
#    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
#    KIND, either express or implied.  See the License for the
#    specific language governing permissions and limitations
#    under the License.
# ====================================================================
#

top_builddir = .
top_srcdir = @top_srcdir@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
VPATH = @top_srcdir@

SVN_RA_LIB_DEPS = @SVN_RA_LIB_DEPS@
SVN_RA_LIB_INSTALL_DEPS = @SVN_RA_LIB_INSTALL_DEPS@
SVN_RA_LIB_LINK = @SVN_RA_LIB_LINK@

SVN_FS_LIB_DEPS = @SVN_FS_LIB_DEPS@
SVN_FS_LIB_INSTALL_DEPS = @SVN_FS_LIB_INSTALL_DEPS@
SVN_FS_LIB_LINK = @SVN_FS_LIB_LINK@

SWIG_SRC_DIR = $(abs_srcdir)/subversion/bindings/swig
SWIG_BUILD_DIR = $(abs_builddir)/subversion/bindings/swig

SCHEMA_DIR = subversion/svn/schema

SVN_APR_LIBS = @SVN_APR_LIBS@
SVN_APRUTIL_LIBS = @SVN_APRUTIL_LIBS@
SVN_APR_MEMCACHE_LIBS = @SVN_APR_MEMCACHE_LIBS@
SVN_DB_LIBS = @SVN_DB_LIBS@
SVN_GPG_AGENT_LIBS = @SVN_GPG_AGENT_LIBS@
SVN_GNOME_KEYRING_LIBS = @SVN_GNOME_KEYRING_LIBS@
SVN_KWALLET_LIBS = @SVN_KWALLET_LIBS@
SVN_MAGIC_LIBS = @SVN_MAGIC_LIBS@
SVN_INTL_LIBS = @SVN_INTL_LIBS@
SVN_SASL_LIBS = @SVN_SASL_LIBS@
SVN_SERF_LIBS = @SVN_SERF_LIBS@
SVN_SQLITE_LIBS = @SVN_SQLITE_LIBS@
SVN_XML_LIBS = @SVN_XML_LIBS@
SVN_ZLIB_LIBS = @SVN_ZLIB_LIBS@
SVN_LZ4_LIBS = @SVN_LZ4_LIBS@
SVN_UTF8PROC_LIBS = @SVN_UTF8PROC_LIBS@
SVN_MACOS_PLIST_LIBS = @SVN_MACOS_PLIST_LIBS@
SVN_MACOS_KEYCHAIN_LIBS = @SVN_MACOS_KEYCHAIN_LIBS@

LIBS = @LIBS@

prefix = @prefix@
exec_prefix = @exec_prefix@
libdir = @libdir@
fsmod_libdir = @libdir@
ramod_libdir = @libdir@
bdb_libdir = @libdir@
gnome_keyring_libdir = @libdir@
gpg_agent_libdir = @libdir@
kwallet_libdir = @libdir@
serf_libdir = @libdir@
bindir = @bindir@
includedir = @includedir@
mandir = @mandir@
srcdir = @srcdir@
canonicalized_srcdir = @canonicalized_srcdir@
datadir = @datadir@
datarootdir = @datarootdir@
localedir = @localedir@

# where to install SVN++
svnxx_libdir = @libdir@

# where to install libsvn_swig_*
swig_py_libdir = @libdir@
swig_pl_libdir = @libdir@
swig_rb_libdir = @libdir@

### these possibly need further discussion
swig_pydir = @libdir@/svn-python/libsvn
swig_pydir_extra = @libdir@/svn-python/svn
swig_pldir = @libdir@/svn-perl
swig_rbdir = $(SWIG_RB_SITE_ARCH_DIR)/svn/ext
toolsdir = @bindir@/svn-tools

# where to install pkg-config files
pkgconfig_dir = $(datadir)/pkgconfig

javahl_javadir = @libdir@/svn-javahl
javahl_javahdir = @libdir@/svn-javahl/include
javahl_libdir = @libdir@
javahl_test_rootdir=$(abs_builddir)/subversion/bindings/javahl/test-work
javahl_test_srcdir=$(abs_srcdir)/subversion/bindings/javahl

gnome_auth_dir = $(abs_builddir)/subversion/libsvn_auth_gnome_keyring/.libs
kwallet_auth_dir = $(abs_builddir)/subversion/libsvn_auth_kwallet/.libs
auth_plugin_dirs = $(gnome_auth_dir):$(kwallet_auth_dir)

MSGFMT = @MSGFMT@
MSGFMTFLAGS = @MSGFMTFLAGS@
MSGMERGE = @MSGMERGE@
XGETTEXT = @XGETTEXT@
TRANG = @TRANG@

PACKAGE_NAME=@PACKAGE_NAME@
PACKAGE_VERSION=@PACKAGE_VERSION@

CC = @CC@
CXX = @CXX@
CPP = @CPP@
EXEEXT = @EXEEXT@

SHELL = @SHELL@
LIBTOOL = @SVN_LIBTOOL@
LTFLAGS = --tag=CC --silent
LTCXXFLAGS = --tag=CXX --silent
LT_CFLAGS = @LT_CFLAGS@
LT_LDFLAGS = @LT_LDFLAGS@
LT_SO_VERSION = @SVN_LT_SOVERSION@
LT_NO_UNDEFINED = @LT_NO_UNDEFINED@
LT_CXX_LIBADD = @LT_CXX_LIBADD@

INCLUDES = -I$(top_srcdir)/subversion/include -I$(top_builddir)/subversion \
           @SVN_APR_INCLUDES@ @SVN_APRUTIL_INCLUDES@ @SVN_APR_MEMCACHE_INCLUDES@ \
           @SVN_DB_INCLUDES@ @SVN_GNOME_KEYRING_INCLUDES@ \
           @SVN_KWALLET_INCLUDES@ @SVN_MAGIC_INCLUDES@ \
           @SVN_SASL_INCLUDES@ @SVN_SERF_INCLUDES@ @SVN_SQLITE_INCLUDES@ \
           @SVN_XML_INCLUDES@ @SVN_ZLIB_INCLUDES@ @SVN_LZ4_INCLUDES@ \
           @SVN_UTF8PROC_INCLUDES@

APACHE_INCLUDES = @APACHE_INCLUDES@
APACHE_LIBEXECDIR = $(DESTDIR)@APACHE_LIBEXECDIR@
APACHE_LDFLAGS = @APACHE_LDFLAGS@

BOOST_TEST_CPPFLAGS = @BOOST_CPPFLAGS@ -DBOOST_TEST_DYN_LINK -DBOOST_TEST_NO_MAIN
BOOST_TEST_LDFLAGS = @BOOST_LDFLAGS@ @BOOST_UNIT_TEST_FRAMEWORK_LIB@

SWIG = @SWIG@
SWIG_PY_INCLUDES = @SWIG_PY_INCLUDES@ @SVN_PY3C_INCLUDES@ -I$(SWIG_SRC_DIR)/python/libsvn_swig_py
SWIG_PY_COMPILE = @SWIG_PY_COMPILE@
SWIG_PY_LINK = @SWIG_PY_LINK@
SWIG_PY_LIBS = @SWIG_PY_LIBS@
SWIG_PY_ERRMSG = @SWIG_PY_ERRMSG@
SWIG_PL_INCLUDES = @SWIG_PL_INCLUDES@
SWIG_PL_ERRMSG = @SWIG_PL_ERRMSG@
SWIG_RB_INCLUDES = @SWIG_RB_INCLUDES@ -I$(SWIG_SRC_DIR)/ruby/libsvn_swig_ruby
SWIG_RB_COMPILE = @SWIG_RB_COMPILE@
SWIG_RB_LINK = @SWIG_RB_LINK@
SWIG_RB_LIBS = @SWIG_RB_LIBS@
SWIG_RB_SITE_LIB_DIR = @SWIG_RB_SITE_LIB_DIR@
SWIG_RB_SITE_ARCH_DIR = @SWIG_RB_SITE_ARCH_DIR@
SWIG_RB_TEST_VERBOSE = @SWIG_RB_TEST_VERBOSE@
SWIG_RB_RI_DATADIR = $(DESTDIR)$(datadir)/ri/$(RUBY_MAJOR).$(RUBY_MINOR)/site
SWIG_RB_ERRMSG = @SWIG_RB_ERRMSG@

CTYPESGEN = @CTYPESGEN@
CTYPES_PYTHON_SRC_DIR = $(abs_srcdir)/subversion/bindings/ctypes-python

JAVAHL_JAR=subversion/bindings/javahl/svn-javahl.jar
JAVAHL_INCLUDES= @JNI_INCLUDES@ -I$(abs_builddir)/subversion/bindings/javahl/include

SVN_BUILD_SVNXX = @SVN_BUILD_SVNXX@
SVN_BUILD_SVNXX_TESTS = @SVN_BUILD_SVNXX_TESTS@
SVNXX_INCLUDES = -I$(abs_srcdir)/subversion/bindings/cxx/include

SVN_APR_CONFIG = @SVN_APR_CONFIG@
SVN_APR_INCLUDES = @SVN_APR_INCLUDES@
SVN_APRUTIL_CONFIG = @SVN_APRUTIL_CONFIG@
SVN_APRUTIL_INCLUDES = @SVN_APRUTIL_INCLUDES@

MKDIR = @MKDIR@

DOXYGEN = @DOXYGEN@

# The EXTRA_ parameters can be used to pass extra flags at 'make' time.
CFLAGS = @CFLAGS@ @CUSERFLAGS@ $(EXTRA_CFLAGS)
CMODEFLAGS = @CMODEFLAGS@
CNOWARNFLAGS = @CNOWARNFLAGS@
CMAINTAINERFLAGS = @CMAINTAINERFLAGS@
CXXFLAGS = @CXXFLAGS@ @CXXUSERFLAGS@ $(EXTRA_CXXFLAGS)
CXXMODEFLAGS = @CXXMODEFLAGS@
CXXNOWARNFLAGS = @CXXNOWARNFLAGS@
CXXMAINTAINERFLAGS = @CXXMAINTAINERFLAGS@
### A few of the CFLAGS (e.g. -Wmissing-prototypes, -Wstrict-prototypes,
### -Wmissing-declarations) are not valid for C++, and should be somehow
### suppressed (but they may come from httpd or APR).
CPPFLAGS = @CPPFLAGS@ $(EXTRA_CPPFLAGS)
LDFLAGS = @LDFLAGS@ $(EXTRA_LDFLAGS)
SWIG_LDFLAGS = @SWIG_LDFLAGS@ $(EXTRA_SWIG_LDFLAGS)
SWIG_FEATURES = @SWIG_FEATURES@
SWIG_PY_FEATURES = @SWIG_PY_FEATURES@
SWIG_PL_FEATURES = @SWIG_PL_FEATURES@
SWIG_RB_FEATURES = @SWIG_RB_FEATURES@
SWIG_PY_OPTS = @SWIG_PY_OPTS@

COMPILE = $(CC) $(CMODEFLAGS) $(CPPFLAGS) $(CMAINTAINERFLAGS) $(CFLAGS) $(INCLUDES)
COMPILE_NOWARN = $(CC) $(CMODEFLAGS) $(CPPFLAGS) $(CNOWARNFLAGS) $(CFLAGS) $(INCLUDES)
COMPILE_CXX = $(CXX) $(CXXMODEFLAGS) $(CPPFLAGS) $(CXXMAINTAINERFLAGS) $(CXXFLAGS) $(INCLUDES)
COMPILE_CXX_NOWARN = $(CXX) $(CXXMODEFLAGS) $(CPPFLAGS) $(CXXNOWARNFLAGS) $(CXXFLAGS) $(INCLUDES)
LT_COMPILE = $(LIBTOOL) $(LTFLAGS) --mode=compile $(COMPILE) $(LT_CFLAGS)
LT_COMPILE_CXX = $(LIBTOOL) $(LTCXXFLAGS) --mode=compile $(COMPILE_CXX) $(LT_CFLAGS)
LT_COMPILE_CXX_NOWARN = $(LIBTOOL) $(LTCXXFLAGS) --mode=compile $(COMPILE_CXX_NOWARN) $(LT_CFLAGS)
# Execute a command that loads libraries from the build dir
LT_EXECUTE = $(LIBTOOL) $(LTFLAGS) --mode=execute `for f in $(abs_builddir)/subversion/*/*.la; do echo -dlopen $$f; done`

# special compilation for files destined for mod_dav_svn
COMPILE_APACHE_MOD = $(LIBTOOL) $(LTFLAGS) --mode=compile $(CC) $(CMODEFLAGS) $(CPPFLAGS) $(CFLAGS) $(CMAINTAINERFLAGS) $(LT_CFLAGS) $(APACHE_INCLUDES) $(INCLUDES) -o $@ -c -shared
COMPILE_SHARED_ONLY_LIB = $(LT_COMPILE) -o $@ -c -shared
COMPILE_SHARED_ONLY_CXX_LIB = $(LT_COMPILE_CXX) -o $@ -c -shared

# special compilation for files destined for libsvn_swig_* (e.g. swigutil_*.c)
COMPILE_SWIG_PY = $(LIBTOOL) $(LTFLAGS) --mode=compile $(SWIG_PY_COMPILE) $(CPPFLAGS) $(LT_CFLAGS) -DSWIGPYTHON $(SWIG_PY_INCLUDES) $(INCLUDES) -o $@ -c
COMPILE_SWIG_PL = $(LIBTOOL) $(LTFLAGS) --mode=compile $(CC) $(CPPFLAGS) $(CFLAGS) $(LT_CFLAGS) $(SWIG_PL_INCLUDES) $(INCLUDES) -o $@ -c
COMPILE_SWIG_RB = $(LIBTOOL) $(LTFLAGS) --mode=compile $(SWIG_RB_COMPILE) $(CPPFLAGS) $(LT_CFLAGS) $(SWIG_RB_INCLUDES) $(INCLUDES) -o $@ -c

# special compilation for files destined for javahl (i.e. C++)
COMPILE_JAVAHL_CXX = $(LIBTOOL) $(LTCXXFLAGS) --mode=compile $(COMPILE_CXX) $(LT_CFLAGS) $(JAVAHL_INCLUDES) -o $@ -c
COMPILE_JAVAHL_JAVAC = $(JAVAC) $(JAVAC_FLAGS)
COMPILE_JAVAHL_COMPAT_JAVAC = $(JAVAC) $(JAVAC_COMPAT_FLAGS)

# On Mac OS X, export an env variable so that the tests can run without
# being installed. OS X needs the DYLD_LIBRARY_PATH env variable set in
# order to find the libraries to link against, because we can't effectively
# use rpath due to way rpath is implemented in the Mach executable format.
TEST_SHLIB_VAR_JAVAHL=\
  if [ "@SVN_APR_SHLIB_PATH_VAR@" = "DYLD_LIBRARY_PATH" ]; then \
    for d in $(abs_builddir)/subversion/libsvn_*; do \
      if [ -n "$$DYLD_LIBRARY_PATH" ]; then \
        @SVN_APR_SHLIB_PATH_VAR@="$$@SVN_APR_SHLIB_PATH_VAR@:$$d/.libs"; \
      else \
        @SVN_APR_SHLIB_PATH_VAR@="$$d/.libs"; \
      fi; \
    done; \
    export @SVN_APR_SHLIB_PATH_VAR@; \
  fi;
TEST_SHLIB_VAR_SWIG_PY=\
  if [ "@SVN_APR_SHLIB_PATH_VAR@" = "DYLD_LIBRARY_PATH" ]; then \
    for d in $(SWIG_PY_DIR)/libsvn_swig_py $(SWIG_PY_DIR)/../../../libsvn_*; do \
      if [ -n "$$DYLD_LIBRARY_PATH" ]; then \
        @SVN_APR_SHLIB_PATH_VAR@="$$@SVN_APR_SHLIB_PATH_VAR@:$$d/.libs"; \
      else \
        @SVN_APR_SHLIB_PATH_VAR@="$$d/.libs"; \
      fi; \
    done; \
    export @SVN_APR_SHLIB_PATH_VAR@; \
  fi;
TEST_SHLIB_VAR_SWIG_RB=\
  if [ "@SVN_APR_SHLIB_PATH_VAR@" = "DYLD_LIBRARY_PATH" ]; then \
    for d in $(SWIG_RB_DIR)/libsvn_swig_ruby $(SWIG_RB_DIR)/../../../libsvn_*; do \
      if [ -n "$$DYLD_LIBRARY_PATH" ]; then \
        @SVN_APR_SHLIB_PATH_VAR@="$$@SVN_APR_SHLIB_PATH_VAR@:$$d/.libs"; \
      else \
        @SVN_APR_SHLIB_PATH_VAR@="$$d/.libs"; \
      fi; \
    done; \
    export @SVN_APR_SHLIB_PATH_VAR@; \
  fi;

# special compilation for files destined for SVN++
COMPILE_SVNXX = $(LT_COMPILE_CXX) $(SVNXX_INCLUDES) -o $@ -c
COMPILE_SVNXX_TEST = $(LT_COMPILE_CXX) $(SVNXX_INCLUDES) $(BOOST_TEST_CPPFLAGS) -o $@ -c

LINK = $(LIBTOOL) $(LTFLAGS) --mode=link $(CC) $(LT_LDFLAGS) $(CFLAGS) $(LDFLAGS) -rpath $(libdir)
LINK_LIB = $(LINK) $(LT_SO_VERSION)
LINK_CXX = $(LIBTOOL) $(LTCXXFLAGS) --mode=link $(CXX) $(LT_LDFLAGS) $(CXXFLAGS) $(LDFLAGS) -rpath $(libdir)
LINK_CXX_LIB = $(LINK_CXX) $(LT_SO_VERSION)
LINK_SVNXX_TEST = $(LINK_CXX) $(BOOST_TEST_LDFLAGS)

# special link rule for mod_dav_svn
LINK_APACHE_MOD = $(LIBTOOL) $(LTFLAGS) --mode=link $(CC) $(LT_LDFLAGS) $(CFLAGS) $(LDFLAGS) -rpath $(APACHE_LIBEXECDIR) -avoid-version -module $(APACHE_LDFLAGS) -shared

# Special LDFLAGS for some libraries
libsvn_client_LDFLAGS = @libsvn_client_LDFLAGS@
libsvn_delta_LDFLAGS = @libsvn_delta_LDFLAGS@
libsvn_diff_LDFLAGS = @libsvn_diff_LDFLAGS@
libsvn_fs_LDFLAGS = @libsvn_fs_LDFLAGS@
libsvn_fs_base_LDFLAGS = @libsvn_fs_base_LDFLAGS@
libsvn_fs_fs_LDFLAGS = @libsvn_fs_fs_LDFLAGS@
libsvn_fs_x_LDFLAGS = @libsvn_fs_x_LDFLAGS@
libsvn_fs_util_LDFLAGS = @libsvn_fs_util_LDFLAGS@
libsvn_ra_LDFLAGS = @libsvn_ra_LDFLAGS@
libsvn_ra_local_LDFLAGS = @libsvn_ra_local_LDFLAGS@
libsvn_ra_serf_LDFLAGS = @libsvn_ra_serf_LDFLAGS@
libsvn_ra_svn_LDFLAGS = @libsvn_ra_svn_LDFLAGS@
libsvn_repos_LDFLAGS = @libsvn_repos_LDFLAGS@
libsvn_subr_LDFLAGS = @libsvn_subr_LDFLAGS@
libsvn_wc_LDFLAGS = @libsvn_wc_LDFLAGS@
shared_only_LDFLAGS = @shared_only_LDFLAGS@

LINK_SHARED_ONLY_LIB = $(LINK_LIB) $(shared_only_LDFLAGS) -shared
LINK_SHARED_ONLY_CXX_LIB = $(LINK_CXX_LIB) $(shared_only_LDFLAGS) -shared

# Compilation of SWIG-generated C source code
COMPILE_PY_WRAPPER = $(LIBTOOL) $(LTFLAGS) --mode=compile $(SWIG_PY_COMPILE) $(LT_CFLAGS) $(CPPFLAGS) $(SWIG_PY_INCLUDES) -prefer-pic -c -o $@
COMPILE_RB_WRAPPER = $(LIBTOOL) $(LTFLAGS) --mode=compile $(SWIG_RB_COMPILE) $(LT_CFLAGS) $(CPPFLAGS) $(SWIG_RB_INCLUDES) -prefer-pic -c -o $@

# these commands link the wrapper objects into an extension library/module
LINK_PY_WRAPPER = $(LIBTOOL) $(LTFLAGS) --mode=link $(SWIG_PY_LINK) $(SWIG_LDFLAGS) -rpath $(swig_pydir) -avoid-version -module
LINK_RB_WRAPPER = $(LIBTOOL) $(LTFLAGS) --mode=link $(SWIG_RB_LINK) $(SWIG_LDFLAGS) -rpath $(swig_rbdir) -avoid-version -module

LINK_JAVAHL_CXX = $(LIBTOOL) $(LTCXXFLAGS) --mode=link $(CXX) $(LT_LDFLAGS) $(CXXFLAGS) $(LDFLAGS) $(LT_CXX_LIBADD) -rpath $(libdir)

INSTALL = @INSTALL@
INSTALL_LIB = $(LIBTOOL) --mode=install $(INSTALL)
INSTALL_FSMOD_LIB = $(INSTALL_LIB)
INSTALL_RAMOD_LIB = $(INSTALL_LIB)
INSTALL_APR_MEMCACHE_LIB = $(INSTALL_LIB)
INSTALL_BDB_LIB = $(INSTALL_LIB)
INSTALL_GPG_AGENT_LIB = $(INSTALL_LIB)
INSTALL_GNOME_KEYRING_LIB = $(INSTALL_LIB)
INSTALL_KWALLET_LIB = $(INSTALL_LIB)
INSTALL_SERF_LIB = $(INSTALL_LIB)
INSTALL_BIN = $(LIBTOOL) --mode=install $(INSTALL)
INSTALL_CONTRIB = $(LIBTOOL) --mode=install $(INSTALL)
INSTALL_TOOLS = $(LIBTOOL) --mode=install $(INSTALL)
INSTALL_INCLUDE = $(INSTALL) -m 644
INSTALL_MOD_SHARED = @APXS@ -i -S LIBEXECDIR="$(APACHE_LIBEXECDIR)" @MOD_ACTIVATION@
INSTALL_DATA = $(INSTALL) -m 644
INSTALL_LOCALE = $(INSTALL_DATA)
INSTALL_APACHE_MODS = @INSTALL_APACHE_MODS@

INSTALL_SVNXX_LIB = $(INSTALL_LIB)

### this isn't correct yet
INSTALL_SWIG_PY = $(INSTALL_LIB)
INSTALL_SWIG_PY_LIB = $(INSTALL_LIB)
INSTALL_SWIG_PL_LIB = $(INSTALL_LIB)
INSTALL_SWIG_RB = $(INSTALL_LIB)
INSTALL_SWIG_RB_LIB = $(INSTALL_LIB)

INSTALL_JAVAHL_LIB = $(INSTALL_LIB)

# additional installation rules for the SWIG wrappers
INSTALL_EXTRA_SWIG_PY=\
  $(MKDIR) $(DESTDIR)$(swig_pydir); \
  $(MKDIR) $(DESTDIR)$(swig_pydir_extra); \
  for i in $(abs_srcdir)/subversion/bindings/swig/python/svn/*.py; do \
    $(INSTALL_DATA) "$$i" $(DESTDIR)$(swig_pydir_extra); \
  done; \
  for i in $(abs_srcdir)/subversion/bindings/swig/python/*.py; do \
    $(INSTALL_DATA) "$$i" $(DESTDIR)$(swig_pydir); \
  done; \
  if test "$(abs_srcdir)" != "$(abs_builddir)"; then \
    for i in $(abs_builddir)/subversion/bindings/swig/python/*.py; do \
      $(INSTALL_DATA) "$$i" $(DESTDIR)$(swig_pydir); \
    done; \
  fi; \
  $(SWIG_PY_PYTHON) -c 'import compileall; \
    compileall.compile_dir("$(DESTDIR)$(swig_pydir)", 1, "$(swig_pydir)"); \
    compileall.compile_dir("$(DESTDIR)$(swig_pydir_extra)", 1, \
    "$(swig_pydir_extra)");'

# The path to generated and complementary source files for the SWIG
# bindings.
SWIG_PL_DIR = $(abs_builddir)/subversion/bindings/swig/perl
SWIG_PY_DIR = $(abs_builddir)/subversion/bindings/swig/python
SWIG_RB_DIR = $(abs_builddir)/subversion/bindings/swig/ruby

# The path to the source files for the SWIG bindings
SWIG_PL_SRC_DIR = $(abs_srcdir)/subversion/bindings/swig/perl
SWIG_PY_SRC_DIR = $(abs_srcdir)/subversion/bindings/swig/python
SWIG_RB_SRC_DIR = $(abs_srcdir)/subversion/bindings/swig/ruby

### Automate JAR creation using Makefile generator's javahl-java.jar
### property.  Enhance generator to support JAR installation.
JAVAHL_MANIFEST_IN = $(abs_srcdir)/subversion/bindings/javahl/Manifest.in
JAVAHL_MANIFEST = subversion/bindings/javahl/Manifest
INSTALL_EXTRA_JAVAHL_JAVA=\
	sed s/%bundleVersion/$(PACKAGE_VERSION)/ $(JAVAHL_MANIFEST_IN) > $(JAVAHL_MANIFEST); \
	$(JAR) cfm $(JAVAHL_JAR) $(JAVAHL_MANIFEST) -C subversion/bindings/javahl/classes org; \
	$(INSTALL_DATA) $(JAVAHL_JAR) $(DESTDIR)$(javahl_javadir);

INSTALL_EXTRA_JAVAHL_LIB=@INSTALL_EXTRA_JAVAHL_LIB@

INSTALL_EXTRA_SWIG_RB=\
  @echo $(MKDIR) $(DESTDIR)$(SWIG_RB_SITE_LIB_DIR)/svn; \
  $(MKDIR) $(DESTDIR)$(SWIG_RB_SITE_LIB_DIR)/svn; \
  for i in $(abs_srcdir)/subversion/bindings/swig/ruby/svn/*.rb; do \
    echo $(INSTALL_DATA) "$$i" $(DESTDIR)$(SWIG_RB_SITE_LIB_DIR)/svn; \
    $(INSTALL_DATA) "$$i" $(DESTDIR)$(SWIG_RB_SITE_LIB_DIR)/svn; \
  done

APXS = @APXS@
HTTPD_VERSION = @HTTPD_VERSION@
HTTPD_WHITELIST = @HTTPD_WHITELIST@

PYTHON = @PYTHON@
SWIG_PY_PYTHON = @SWIG_PY_PYTHON@
SWIG_PL_PERL = @SWIG_PL_PERL@

JDK = @JDK@
JAVA = @JAVA@
JAVAC = @JAVAC@
JAVADOC = @JAVADOC@
JAVAC_FLAGS = @JAVAC_FLAGS@
JAVAC_COMPAT_FLAGS = @JAVAC_COMPAT_FLAGS@
JAR = @JAR@

JAVA_CLASSPATH=$(abs_srcdir)/subversion/bindings/javahl/src:@JAVA_CLASSPATH@
javahl_java_CLASSPATH=$(JAVA_CLASSPATH)
javahl_compat_CLASSPATH=$(JAVA_CLASSPATH)
javahl_tests_CLASSPATH=$(JAVA_CLASSPATH)
javahl_compat_tests_CLASSPATH=$(JAVA_CLASSPATH)

SWIG_RB_RUBY = @SWIG_RB_RUBY@
RUBY_MAJOR = @RUBY_MAJOR@
RUBY_MINOR = @RUBY_MINOR@
RDOC = @RDOC@

ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@

TESTS = $(TEST_PROGRAMS) @BDB_TEST_PROGRAMS@

all: mkdir-init local-all
clean: local-clean
distclean: local-distclean
extraclean: local-extraclean
install: local-install revision-install

@INCLUDE_OUTPUTS@

local-all: @BUILD_RULES@ @TRANSFORM_LIBTOOL_SCRIPTS@

transform-libtool-scripts: @BUILD_RULES@
	@$(SHELL) $(top_srcdir)/build/transform_libtool_scripts.sh

locale-gnu-pot:
	cd $(abs_srcdir) && XGETTEXT="$(XGETTEXT)" MSGMERGE="$(MSGMERGE)" \
	  $(SHELL) tools/po/po-update.sh pot

# "make locale-gnu-po-update" updates all translations.
# "make locale-gnu-po-update PO=ll" updates only the ll.po file.
locale-gnu-po-update:
	cd $(abs_srcdir) && XGETTEXT="$(XGETTEXT)" MSGMERGE="$(MSGMERGE)" \
	  $(SHELL) tools/po/po-update.sh $(PO)

# clean everything but the bulky test output, returning the system back
# to before 'make' was run.
fast-clean: doc-clean
	@list='$(BUILD_DIRS)'; for i in $$list; do                   \
          if [ -d $$i ]; then                                        \
            (cd $$i && rm -f *.o *.lo *.la *.la-a *.spo *.mo &&      \
             rm -rf .libs);                                          \
          fi                                                         \
        done
	echo $(CLEAN_FILES) | xargs rm -f --
	for d in $(CTYPES_PYTHON_SRC_DIR) $(SWIG_PY_SRC_DIR) $(SWIG_PY_DIR) \
		$(abs_srcdir)/build $(top_srcdir)/subversion/tests/cmdline; \
	do \
	  test -e $$d || continue; \
	  find $$d '(' -name "__pycache__" -prune -o -name "*.pyc" ')' \
	    -exec rm -rf {} ';'; \
	done

# clean everything, returning to before './configure' was run.
SVN_CONFIG_SCRIPT_FILES = @SVN_CONFIG_SCRIPT_FILES@
local-distclean: local-clean
	rm -fr config.cache config.log config.nice config.status \
	  libtool mkmf.log subversion/svn_private_config.h \
	  subversion/bindings/javahl/classes \
	  subversion/bindings/javahl/include \
	  subversion/libsvn_*/*.pc \
	$(SVN_CONFIG_SCRIPT_FILES)
	rm -f Makefile

# clean everything out, returning to before './autogen.sh' was run.
local-extraclean: extraclean-bindings local-distclean
	rm -f $(top_srcdir)/build-outputs.mk \
              $(top_srcdir)/subversion/svn_private_config.h.in \
              $(top_srcdir)/aclocal.m4 \
              $(top_srcdir)/configure \
              $(top_srcdir)/gen-make.opts \
              $(top_srcdir)/build/config.guess \
              $(top_srcdir)/build/config.sub \
              $(top_srcdir)/build/libtool.m4 \
              $(top_srcdir)/build/ltoptions.m4 \
              $(top_srcdir)/build/ltsugar.m4 \
              $(top_srcdir)/build/ltversion.m4 \
              $(top_srcdir)/build/lt~obsolete.m4 \
              $(top_srcdir)/build/ltmain.sh \
              $(top_srcdir)/build/transform_libtool_scripts.sh \
              $(EXTRACLEAN_FILES)


# clean everything, including test output.
local-clean: check-clean clean-bindings fast-clean

local-install: @INSTALL_RULES@

revision-install:
	test -d $(DESTDIR)$(includedir)/subversion-1 || \
	  $(MKDIR) $(DESTDIR)$(includedir)/subversion-1
	(subversion/svnversion/svnversion $(top_srcdir) 2> /dev/null ||  \
	 svnversion $(top_srcdir) 2> /dev/null ||                        \
	 echo "unknown";                                                 \
	) > $(DESTDIR)$(includedir)/subversion-1/svn-revision.txt

install-static: @INSTALL_STATIC_RULES@

# JavaHL target aliases
javahl: mkdir-init javahl-java javahl-callback-java javahl-remote-java javahl-types-java javahl-util-java javahl-lib @JAVAHL_TESTS_TARGET@ javahl-compat
install-javahl: javahl install-javahl-java install-javahl-lib
javahl-compat: javahl-compat-java @JAVAHL_COMPAT_TESTS_TARGET@

clean-javahl:
	if [ -d $(javahl_test_rootdir) ]; then \
	  rm -rf $(javahl_test_rootdir)/*;     \
	fi
	rm -rf $(javahl_java_PATH) $(javahl_javah_PATH) @JAVAHL_OBJDIR@
	rm -f $(libsvnjavahl_PATH)/*.la $(JAVAHL_JAR)
	rm -f $(libsvnjavahl_PATH)/*.lo
	rm -f $(libsvnjavahl_PATH)/*.o

check-tigris-javahl: javahl-compat
	@FIX_JAVAHL_LIB@
	$(TEST_SHLIB_VAR_JAVAHL) \
	$(JAVA) -Xcheck:jni "-Dtest.rootdir=$(javahl_test_rootdir)" "-Dtest.srcdir=$(javahl_test_srcdir)" "-Dtest.rooturl=$(BASE_URL)" "-Dtest.fstype=$(FS_TYPE)" "-Djava.library.path=@JAVAHL_OBJDIR@:$(libdir)" -classpath "$(javahl_compat_tests_PATH):$(javahl_tests_CLASSPATH)" "-Dtest.cleanup=$(JAVAHL_CLEANUP)" "-Dtest.tests=$(JAVAHL_TESTS)" org.tigris.subversion.javahl.RunTests

check-apache-javahl: javahl
	@FIX_JAVAHL_LIB@
	$(TEST_SHLIB_VAR_JAVAHL) \
	$(JAVA) -Xcheck:jni "-Dtest.rootdir=$(javahl_test_rootdir)" "-Dtest.srcdir=$(javahl_test_srcdir)" "-Dtest.rooturl=$(BASE_URL)" "-Dtest.fstype=$(FS_TYPE)" "-Djava.library.path=@JAVAHL_OBJDIR@:$(libdir)" -classpath "$(javahl_tests_PATH):$(javahl_tests_CLASSPATH)" "-Dtest.cleanup=$(JAVAHL_CLEANUP)" "-Dtest.tests=$(JAVAHL_TESTS)" org.apache.subversion.javahl.RunTests

check-deprecated-authn-javahl: javahl
	@FIX_JAVAHL_LIB@
	$(TEST_SHLIB_VAR_JAVAHL) \
	$(JAVA) -Xcheck:jni "-Dtest.rootdir=$(javahl_test_rootdir)" "-Dtest.srcdir=$(javahl_test_srcdir)" "-Dtest.rooturl=$(BASE_URL)" "-Dtest.fstype=$(FS_TYPE)" "-Djava.library.path=@JAVAHL_OBJDIR@:$(libdir)" -classpath "$(javahl_tests_PATH):$(javahl_tests_CLASSPATH)" "-Dtest.cleanup=$(JAVAHL_CLEANUP)" "-Dtest.tests=$(JAVAHL_TESTS)" "-Dtest.authn.deprecated=true" org.apache.subversion.javahl.RunTests

check-javahl: check-apache-javahl

check-all-javahl: check-apache-javahl check-tigris-javahl check-deprecated-authn-javahl

check-svnxx: svnxx-tests
	$(abs_builddir)/$(svnxx_tests_PATH)/svnxx-tests$(EXEEXT)

# "make check CLEANUP=true" will clean up directories for successful tests.
# "make check TESTS=subversion/tests/cmdline/basic_tests.py"
#  will perform only basic tests (likewise for other tests).
check: bin @TRANSFORM_LIBTOOL_SCRIPTS@ $(TEST_DEPS) @BDB_TEST_DEPS@
	@if test "$(PYTHON)" != "none"; then                                 \
	  if test "$(CLEANUP)" != ""; then                                   \
	    flags="--cleanup $$flags";                                       \
	  fi;                                                                \
	  if test "$(BASE_URL)" != ""; then                                  \
	    flags="--url $(BASE_URL) $$flags";                               \
	  fi;                                                                \
	  if test "$(SKIP_C_TESTS)" != ""; then                              \
	    flags="--skip-c-tests $$flags";                                  \
	  fi;                                                                \
	  if test "$(DUMP_LOAD_CROSS_CHECK)" != ""; then                     \
	    flags="--dump-load-cross-check $$flags";                         \
	  fi;                                                                \
	  if test "$(FS_TYPE)" != ""; then                                   \
	    flags="--fs-type $(FS_TYPE) $$flags";                            \
	  fi;                                                                \
	  if test "$(HTTP_LIBRARY)" != ""; then                              \
	    flags="--http-library $(HTTP_LIBRARY) $$flags";                  \
	  fi;                                                                \
	  if test "$(HTTPD_VERSION)" != ""; then                             \
	     flags="--httpd-version $(HTTPD_VERSION) $$flags";               \
	  fi;                                                                \
	  if test "$(HTTPD_WHITELIST)" != ""; then                           \
	     flags="--httpd-whitelist $(HTTPD_WHITELIST) $$flags";           \
	  fi;                                                                \
	  if test "$(SERVER_MINOR_VERSION)" != ""; then                      \
	    flags="--server-minor-version $(SERVER_MINOR_VERSION) $$flags";  \
	  fi;                                                                \
	  if test "$(WC_FORMAT_VERSION)" != ""; then                         \
	    flags="--wc-format-version $(WC_FORMAT_VERSION) $$flags";        \
	  fi;                                                                \
	  if test "$(ENABLE_SASL)" != ""; then                               \
	    flags="--enable-sasl $$flags";                                   \
	  fi;                                                                \
	  if test "$(FSFS_SHARDING)" != ""; then                             \
	    flags="--fsfs-sharding $(FSFS_SHARDING) $$flags";                \
	  fi;                                                                \
	  if test "$(FSFS_PACKING)" != ""; then                              \
	    flags="--fsfs-packing $$flags";                                  \
	  fi;                                                                \
	  if test "$(PARALLEL)" != ""; then                                  \
	    flags="--parallel $(PARALLEL) $$flags";                          \
	  fi;                                                                \
	  if test "$(GLOBAL_SCHEDULER)" != ""; then                          \
	    flags="--global-scheduler $$flags";                              \
	  fi;                                                                \
	  if test "$(LOG_TO_STDOUT)" != ""; then                             \
	    flags="--log-to-stdout $$flags";                                 \
	  fi;                                                                \
	  if test "$(MILESTONE_FILTER)" != ""; then                          \
	    flags="--list --milestone-filter=$(MILESTONE_FILTER)             \
		   --mode-filter=$(MODE_FILTER) --log-to-stdout $$flags";    \
	  fi;                                                                \
	  if test "$(SET_LOG_LEVEL)" != ""; then                             \
	    flags="--set-log-level $(SET_LOG_LEVEL) $$flags";                \
	  fi;                                                                \
	  if test "$(SSL_CERT)" != ""; then                                  \
	    flags="--ssl-cert $(SSL_CERT) $$flags";                          \
	  fi;                                                                \
	  if test "$(HTTP_PROXY)" != ""; then                                \
	    flags="--http-proxy $(HTTP_PROXY) $$flags";                      \
	  fi;                                                                \
	  if test "$(EXCLUSIVE_WC_LOCKS)" != ""; then                        \
	    flags="--exclusive-wc-locks $$flags";                            \
	  fi;                                                                \
	  if test "$(MEMCACHED_SERVER)" != ""; then                          \
	    flags="--memcached-server $(MEMCACHED_SERVER) $$flags";          \
	  fi;                                                                \
	  if test "$(FSFS_COMPRESSION)" != ""; then                          \
	    flags="--fsfs-compression $(FSFS_COMPRESSION) $$flags";          \
	  fi;                                                                \
	  if test "$(FSFS_DIR_DELTIFICATION)" != ""; then                    \
	    flags="--fsfs-dir-deltification $(FSFS_DIR_DELTIFICATION) $$flags";\
	  fi;                                                                \
	  if test "$(ALLOW_REMOTE_HTTP_CONNECTION)" != ""; then              \
	    flags="--allow-remote-http-connection $$flags";                  \
	  fi;                                                                \
	  if test "$(SVN_BIN_DIR)" != ""; then                               \
	    flags="--bin $(SVN_BIN_DIR) $$flags";                            \
	  fi;                                                                \
	  if test "$(STORE_PRISTINE)" != ""; then                            \
	    flags="--store-pristine $(STORE_PRISTINE) $$flags";              \
	  fi;                                                                \
	  if test "$(VALGRIND)" != ""; then                                  \
	    flags="--valgrind $(VALGRIND) $$flags";                          \
	  fi;                                                                \
	  if test "$(VALGRIND_OPTS)" != ""; then                             \
	    flags="--valgrind-opts $(VALGRIND_OPTS) $$flags";                \
	  fi;                                                                \
	  LD_LIBRARY_PATH='$(auth_plugin_dirs):$(LD_LIBRARY_PATH)'           \
	  $(PYTHON) $(top_srcdir)/build/run_tests.py                         \
	            --config-file $(top_srcdir)/subversion/tests/tests.conf  \
	            $$flags                                                  \
	            '$(abs_srcdir)' '$(abs_builddir)' $(TESTS);              \
	else                                                                 \
	  echo "make check: Python 2.7 or greater is required,";             \
	  echo "            but was not detected during configure";          \
	  exit 1;                                                            \
	fi;

# First, set up Apache as documented in
# subversion/tests/cmdline/README.
davcheck: bin $(TEST_DEPS) @BDB_TEST_DEPS@ apache-mod mod_dontdothat
	@$(MAKE) check BASE_URL=http://localhost

# Automatically configure and run Apache httpd on a random port, and then
# run make check.
davautocheck: bin $(TEST_DEPS) @BDB_TEST_DEPS@ apache-mod mod_dontdothat
	@# Takes MODULE_PATH, USE_HTTPV1 and SVN_PATH_AUTHZ in the environment.
	@APXS=$(APXS) MAKE=$(MAKE) $(SHELL) $(top_srcdir)/subversion/tests/cmdline/davautocheck.sh

# First, run:
#   subversion/svnserve/svnserve -d -r `pwd`/subversion/tests/cmdline
svncheck: bin $(TEST_DEPS) @BDB_TEST_DEPS@
	@$(MAKE) check BASE_URL=svn://127.0.0.1

# 'make svnserveautocheck' runs svnserve for you and kills it.
svnserveautocheck: svnserve bin $(TEST_DEPS) @BDB_TEST_DEPS@
	@env PYTHON=$(PYTHON) THREADED=$(THREADED) MAKE=$(MAKE) \
	  $(SHELL) $(top_srcdir)/subversion/tests/cmdline/svnserveautocheck.sh

# First, run:
#   subversion/svnserve/svnserve --listen-host "::1" -d -r `pwd`/subversion/tests/cmdline

svncheck6: bin $(TEST_DEPS) @BDB_TEST_DEPS@
	@$(MAKE) check BASE_URL=svn://\[::1\]

# First make sure you can ssh to localhost and that "svnserve" is in
# the path of the resulting shell.
svnsshcheck: bin $(TEST_DEPS) @BDB_TEST_DEPS@
	@$(MAKE) check \
	  BASE_URL=svn+ssh://localhost`pwd`/subversion/tests/cmdline

bdbcheck: bin $(TEST_DEPS) @BDB_TEST_DEPS@
	@$(MAKE) check FS_TYPE=bdb

# Produce the clang compilation database as the compile_commands.json file
# in the srcdir.  This is used by tools such as the YouCompleteMe vim plugin
# to know the compile flags for various source files so that analysis such
# as syntax checking, static analysis or symbol completion can be done
# outside the build system.  To do this it uses the tool called bear:
# https://github.com/rizsotto/Bear
compile-commands:
	@bear -o $(abs_srcdir)/compile_commands.json -- $(MAKE) all

# Create an execution coverage report from the data collected during
# all execution since the last reset.
gcov:
	lcov --capture -d . -b . -o gcov-lcov.dat > gcov-lcov.log
	genhtml gcov-lcov.dat -o gcov-report > gcov-genhtml.log

# Reset all execution coverage counters to zero.
gcov-reset:
	lcov --zerocounters -d .

# Remove the execution coverage data and the report.
gcov-clean:
	rm -f gcov-lcov.dat gcov-lcov.log gcov-genhtml.log
	rm -rf gcov-report
	find . \( -name "*.gcda" -o -name "*.gcno" \) -exec rm -f -- {} \;

check-clean: gcov-clean
	if [ -d subversion/tests/cmdline/svn-test-work ]; then \
	  rm -rf subversion/tests/cmdline/svn-test-work/*;     \
	fi
	rm -rf subversion/tests/libsvn_fs/test-repo-*          \
	       subversion/tests/libsvn_fs_base/test-repo-*     \
	       subversion/tests/libsvn_fs_fs/test-repo-*       \
	       subversion/tests/libsvn_fs_x/test-repo-*        \
	       subversion/tests/libsvn_ra_local/test-repo-*    \
	       subversion/tests/libsvn_repos/test-repo-*       \
	       subversion/tests/libsvn_subr/z                  \
	       subversion/tests/libsvn_wc/fake-wc              \
	       subversion/tests/libsvn_client/test-patch*      \
	       subversion/tests/libsvn_client/test-*/          \
	       subversion/tests/libsvn_diff/B2                 \
	       subversion/tests/libsvn_diff/T1                 \
	       subversion/tests/libsvn_diff/T2                 \
	       subversion/tests/libsvn_diff/T3                 \
	       subversion/tests/cmdline/httpd-*                \
	       subversion/tests/cmdline/svnserve-*             \
	       tests.log fails.log

mkdir-init:
	@list='$(BUILD_DIRS) $(SCHEMA_DIR) doc';         \
        for i in $$list; do                              \
            if [ ! -d $$i ]; then                        \
                $(MKDIR) $$i ;                           \
            fi;                                          \
        done

# DOCUMENTATION RULES

# Every single document in every format.
doc: doc-api doc-javahl

# Generate API documentation for the C libraries.
### This could also generate POD for swig-perl, etc.
doc-api: mkdir-init
	( cd $(top_srcdir) && \
	  sed "s,\(OUTPUT_DIRECTORY *= *\),\1$(abs_builddir)/," \
	  doc/doxygen.conf | $(DOXYGEN) - )

# Generate API documentation for the JavaHL package.
doc-javahl:
	$(JAVADOC) -d $(abs_builddir)/doc/javadoc \
	  -sourcepath $(top_srcdir)/subversion/bindings/javahl/src \
	  -link https://docs.oracle.com/en/java/javase/11/docs/api/ \
	  org.tigris.subversion.javahl \
	  org.apache.subversion.javahl \
	  org.apache.subversion.javahl.callback \
	  org.apache.subversion.javahl.remote \
	  org.apache.subversion.javahl.types \
	  org.apache.subversion.javahl.util

doc-clean:
	rm -rf $(abs_builddir)/doc/doxygen
	rm -rf $(abs_builddir)/doc/javadoc

# Converting from the .rnc XML schemas to various other schema formats.
SCHEMAS_DTD = $(SCHEMA_DIR)/blame.dtd \
              $(SCHEMA_DIR)/diff.dtd \
              $(SCHEMA_DIR)/info.dtd \
              $(SCHEMA_DIR)/list.dtd \
              $(SCHEMA_DIR)/log.dtd \
              $(SCHEMA_DIR)/props.dtd \
              $(SCHEMA_DIR)/status.dtd

SCHEMAS_RNG = $(SCHEMA_DIR)/blame.rng \
              $(SCHEMA_DIR)/diff.rng \
              $(SCHEMA_DIR)/info.rng \
              $(SCHEMA_DIR)/list.rng \
              $(SCHEMA_DIR)/log.rng \
              $(SCHEMA_DIR)/props.rng \
              $(SCHEMA_DIR)/status.rng

SCHEMAS_XSD = $(SCHEMA_DIR)/blame.xsd \
              $(SCHEMA_DIR)/diff.xsd \
              $(SCHEMA_DIR)/info.xsd \
              $(SCHEMA_DIR)/list.xsd \
              $(SCHEMA_DIR)/log.xsd \
              $(SCHEMA_DIR)/props.xsd \
              $(SCHEMA_DIR)/status.xsd

schema: mkdir-init schema-rng schema-dtd schema-xsd

schema-rng: $(SCHEMAS_RNG)
schema-dtd: $(SCHEMAS_DTD)
schema-xsd: $(SCHEMAS_XSD)

$(SCHEMAS_RNG) $(SCHEMAS_DTD) $(SCHEMAS_XSD): $(SCHEMA_DIR)/common.rnc

schema-clean:
	(cd $(SCHEMA_DIR) && rm -f *.rng *.dtd *.xsd)

#
# Implicit rules for creating outputs from input files
#
.SUFFIXES:
.SUFFIXES: .c .cpp .lo .o .la-a .la \
           .po .spo .mo .rnc .rng .dtd .xsd .sql .h

.sql.h:
	$(PYTHON) $(top_srcdir)/build/transform_sql.py $< $(top_srcdir)/$@

.c.o:
	$(COMPILE) -o $@ -c $<

.cpp.o:
	$(COMPILE_CXX) -o $@ -c $<

.c.lo:
	$(LT_COMPILE) -o $@ -c $<

.cpp.lo:
	$(LT_COMPILE_CXX) -o $@ -c $<

.la.la-a:
	sed "/library_names/s/'.*'/''/" $< > $@


# Strip the Content-Type: header from the po file if we don't have a
# gettext that supports bind_textdomain_codeset, so it doesn't try
# to convert our UTF-8 .po files to the locale encoding.
@NO_GETTEXT_CODESET@.po.spo:
@NO_GETTEXT_CODESET@	sed \
@NO_GETTEXT_CODESET@	'/^"Content-Type: text\/plain; charset=UTF-8\\n"$$/d' \
@NO_GETTEXT_CODESET@	$< > $@

@NO_GETTEXT_CODESET@.spo.mo:
@NO_GETTEXT_CODESET@	$(MSGFMT) $(MSGFMTFLAGS) -o $@ $<

# For systems with bind_textdomain_codeset, just leave the Content-Type:
# header alone.
@GETTEXT_CODESET@.po.mo:
@GETTEXT_CODESET@	$(MSGFMT) $(MSGFMTFLAGS) -o $@ $<

.rnc.rng:
	@TRANG@ $< $@

.rnc.dtd:
	@TRANG@ $< $@

.rnc.xsd:
	@TRANG@ $< $@

install-docs: install-man

manroot = $(mandir)/man
install-man:
	@list='$(MANPAGES)';                                               \
        for i in $$list; do                                                \
          if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i;               \
          else file=$$i; fi;                                               \
          ext=`echo $$i | sed -e 's/^.*\\.//'`;                            \
          $(MKDIR) $(DESTDIR)$(manroot)$$ext;                              \
          inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`;                   \
          inst=`echo $$inst | sed -e 's/^.*\///'`;                         \
          inst=`echo $$inst`.$$ext;                                        \
          echo "$(INSTALL_DATA) $$file $(DESTDIR)$(manroot)$$ext/$$inst";  \
          $(INSTALL_DATA) $$file $(DESTDIR)$(manroot)$$ext/$$inst;         \
        done

install-swig-py: install-swig-py-lib
install-swig-rb: install-swig-rb-lib

clean-bindings: clean-swig clean-ctypes-python clean-javahl

extraclean-bindings: clean-swig extraclean-swig-headers \
			extraclean-swig-py extraclean-swig-rb \
			extraclean-swig-pl \
			clean-ctypes-python clean-javahl \

clean-swig: clean-swig-headers clean-swig-py clean-swig-rb clean-swig-pl
	@rm -f .swig_checked

EXTRACLEAN_SWIG_HEADERS=rm -f $(SWIG_SRC_DIR)/proxy/*.swg

clean-swig-headers:
	if test -z "$(RELEASE_MODE)"; then \
	  $(EXTRACLEAN_SWIG_HEADERS); \
	fi

extraclean-swig-headers: clean-swig-headers
	$(EXTRACLEAN_SWIG_HEADERS)

$(SWIG_PL_DIR)/native/Makefile.PL: $(SWIG_SRC_DIR)/perl/native/Makefile.PL.in
	./config.status subversion/bindings/swig/perl/native/Makefile.PL

$(SWIG_PL_DIR)/native/Makefile: libsvn_swig_perl $(SWIG_PL_DIR)/native/Makefile.PL
	cd $(SWIG_PL_DIR)/native; $(SWIG_PL_PERL) Makefile.PL PREFIX=$(prefix)

# There is a "readlink -f" command on some systems for the same purpose,
# but it's not as portable (e.g. Mac OS X doesn't have it).  These should
# only be used where Python/Perl are known to be available.
READLINK_PY=$(PYTHON) -c 'import sys,os; print(os.path.realpath(sys.argv[1]))'
READLINK_PL=$(SWIG_PL_PERL) -e 'use Cwd; print Cwd::realpath(shift)'

swig-pl: autogen-swig-pl $(SWIG_PL_DIR)/native/Makefile
	if test "`$(READLINK_PL) $(SWIG_PL_DIR)`" != "`$(READLINK_PL) $(SWIG_PL_SRC_DIR)`"; then \
	  for f in $(SWIG_PL_SRC_DIR)/native/*.c ; do \
	     if [ -e "$$f" ] ; then \
	       ln -sf "$$f" $(SWIG_PL_DIR)/native; \
	    fi; \
	  done; \
	fi
	cd $(SWIG_PL_DIR)/native; $(MAKE) OPTIMIZE="" OTHERLDFLAGS="$(SWIG_LDFLAGS)"

check-swig-pl: swig-pl swig-pl-lib
	cd $(SWIG_PL_DIR)/native; $(MAKE) test

install-swig-pl: swig-pl install-swig-pl-lib
	cd $(SWIG_PL_DIR)/native; $(MAKE) install

EXTRACLEAN_SWIG_PL=rm -f $(SWIG_PL_SRC_DIR)/native/svn_*.c \
                         $(SWIG_PL_SRC_DIR)/native/core.c

# Running Makefile.PL at this point *fails* (cannot find ..../.libs) so if the
# Makefile does not exist, DO NOT try to make it. But, if it doesn't exist,
# then the directory is probably clean anyway.
clean-swig-pl:
	rm -f .swig_pl_checked
	if test -z "$(RELEASE_MODE)"; then \
	  $(EXTRACLEAN_SWIG_PL); \
	fi
	for d in $(SWIG_PL_DIR)/libsvn_swig_perl; \
	do \
	  test -e $$d && cd $$d || continue; \
	  rm -rf *.lo *.la *.o .libs; \
	done
	if [ -f "$(SWIG_PL_DIR)/native/Makefile" ]; then \
	  cd $(SWIG_PL_DIR)/native; $(MAKE) clean; \
	fi

extraclean-swig-pl: clean-swig-pl
	$(EXTRACLEAN_SWIG_PL)

swig-py: autogen-swig-py

$(SWIG_PY_DIR)/libsvn:
	mkdir $(SWIG_PY_DIR)/libsvn

copy-swig-py: autogen-swig-py swig-py $(SWIG_PY_DIR)/libsvn
	@for f in $(SWIG_PY_SRC_DIR)/*.py $(SWIG_PY_DIR)/*.py; do \
	  ! [ -f "$$f" ] || cp -pf $$f $(SWIG_PY_DIR)/libsvn; \
	done
	@cd $(SWIG_PY_DIR)/libsvn;ln -sf ../.libs/*.so .
	@touch $(SWIG_PY_DIR)/libsvn/__init__.py

check-swig-py: swig-py copy-swig-py
	$(TEST_SHLIB_VAR_SWIG_PY) \
	cd $(SWIG_PY_DIR); \
	  $(SWIG_PY_PYTHON) $(SWIG_PY_SRC_DIR)/tests/run_all.py

EXTRACLEAN_SWIG_PY=rm -rf $(SWIG_PY_DIR)/svn_*.c $(SWIG_PY_DIR)/core.c \
                          $(SWIG_PY_DIR)/[a-z]*.py
clean-swig-py:
	rm -f .swig_py_checked
	rm -rf $(SWIG_PY_DIR)/libsvn
	if test -z "$(RELEASE_MODE)"; then \
	  $(EXTRACLEAN_SWIG_PY); \
	fi
	for d in $(SWIG_PY_DIR) $(SWIG_PY_DIR)/libsvn_swig_py; \
	do \
	  test -e $$d && cd $$d || continue; \
	  rm -rf *.lo *.la *.o *.pyc .libs; \
	done
	for d in $(SWIG_PY_SRC_DIR) $(SWIG_PY_DIR); \
	do \
	  test -e $$d || continue; \
	  find $$d '(' -name "__pycache__" -prune -o -name "*.pyc" ')' \
	    -exec rm -rf {} ';'; \
	done

extraclean-swig-py: clean-swig-py
	$(EXTRACLEAN_SWIG_PY)

swig-rb: autogen-swig-rb

check-swig-rb: swig-rb svnserve
	$(TEST_SHLIB_VAR_SWIG_RB) \
	cd $(SWIG_RB_DIR); \
	  check_rb() { \
	    $(SWIG_RB_RUBY) -I $(SWIG_RB_SRC_DIR) $(SWIG_RB_SRC_DIR)/test/run-test.rb "$$@"; \
	  }; \
	  if check_rb --help 2>&1 | grep -q -- --collector; then \
	    check_rb --collector=dir --verbose=$(SWIG_RB_TEST_VERBOSE); \
	  elif [ "$(RUBY_MAJOR)" -eq 1 -a "$(RUBY_MINOR)" -lt 9 ] ; then \
	    check_rb --verbose=$(SWIG_RB_TEST_VERBOSE); \
	  else \
	    check_rb; \
          fi

EXTRACLEAN_SWIG_RB=rm -f $(SWIG_RB_SRC_DIR)/svn_*.c $(SWIG_RB_SRC_DIR)/core.c

clean-swig-rb:
	rm -f .swig_rb_checked
	rm -rf $(SWIG_RB_DIR)/test/repos $(SWIG_RB_DIR)/test/wc
	if test -z "$(RELEASE_MODE)"; then \
	  $(EXTRACLEAN_SWIG_RB); \
	fi
	for d in $(SWIG_RB_DIR) $(SWIG_RB_DIR)/libsvn_swig_ruby; \
	do \
	  test -e $$d && cd $$d || continue; \
	  rm -rf *.lo *.la *.o .libs; \
	done

extraclean-swig-rb: clean-swig-rb
	$(EXTRACLEAN_SWIG_RB)

install-swig-rb-doc:
	$(RDOC) --all --ri --op "$(SWIG_RB_RI_DATADIR)" "$(SWIG_RB_SRC_DIR)/svn"

# ctypes-python make targets
ctypes-python: local-all
	$(SHELL) $(abs_srcdir)/build/run_ctypesgen.sh "$(LT_EXECUTE)" "$(CPPFLAGS)" "$(EXTRA_CTYPES_LDFLAGS)" "$(PYTHON)" "$(CTYPESGEN)" "$(abs_srcdir)" "$(abs_builddir)" "$(libdir)" "$(SVN_APR_CONFIG)" "$(SVN_APRUTIL_CONFIG)" "$(CPP)"

install-ctypes-python: ctypes-python
	cd $(CTYPES_PYTHON_SRC_DIR); \
	  $(PYTHON) setup.py install --prefix="$(DESTDIR)$(prefix)"

check-ctypes-python: ctypes-python
	cd $(CTYPES_PYTHON_SRC_DIR); \
	  $(LT_EXECUTE) $(PYTHON) test/run_all.py

# If any of those files exists, run ctypes' 'setup.py clean'.  We don't run
# it otherwise because it spams stdout+stderr; see r1479326.
clean-ctypes-python:
	cd $(CTYPES_PYTHON_SRC_DIR);            \
	  for b in build csvn/core/functions.py svn_all.py svn_all2.py ; do \
	    if [ -e "$$b" ] ; then              \
	      $(PYTHON) setup.py clean --all;   \
	      break;                            \
	    fi;                                 \
	  done

# manually describe a dependency, which we won't otherwise detect
subversion/libsvn_wc/wc-queries.h: $(abs_srcdir)/subversion/libsvn_wc/wc-metadata.sql
subversion/libsvn_wc/wc-queries.h: $(abs_srcdir)/subversion/libsvn_wc/wc-checks.sql

# Compatibility symlink.
# This runs after the target of the same name in build-outputs.mk.
INSTALL_EXTRA_TOOLS=\
  $(MKDIR) $(DESTDIR)$(bindir); \
  test -n "$$SVN_SVNMUCC_IS_SVNSYITF" && \
  ln -sf svnmucc$(EXEEXT) $(DESTDIR)$(bindir)/svnsyitf$(EXEEXT); \
  if test "$(DESTDIR)$(bindir)" != "$(DESTDIR)$(toolsdir)"; then \
    ln -sf $(bindir)/svnmucc$(EXEEXT) $(DESTDIR)$(toolsdir)/svnmucc$(EXEEXT); \
    ln -sf $(bindir)/svnbench$(EXEEXT) $(DESTDIR)$(toolsdir)/svn-bench$(EXEEXT); \
  fi; \
  printf '\043\041/bin/sh\n%s\n' \
    'exec $(bindir)/svnfsfs stats $${2:+"-M"} $${2:+"$$2"} "$$1"' \
    > $(DESTDIR)$(toolsdir)/fsfs-stats$(EXEEXT) && \
  chmod +x $(DESTDIR)$(toolsdir)/fsfs-stats$(EXEEXT)
# \043\041 is a "#!".  It's written this way because gmake and bmake disagree on
# how to include a literal '#' in a command, and because '!' is special to some
# shells.