{:.no_toc}
The ActionMapper interface provides a mapping between HTTP requests and action invocation requests and vice-versa.
When given an HttpServletRequest, the ActionMapper may return null if no action invocation request matches or it may return an ActionMapping
that describes an action invocation for the framework to try.
The ActionMapper is not required to guarantee that the ActionMapping
returned be a real action or otherwise ensure a valid request. Accordingly, most ActionMappers do not need to consult the Struts configuration just to determine if a request should be mapped.
Just as requests can be mapped from HTTP to an action invocation, the opposite is true as well. However, because HTTP requests (when shown in HTTP responses) must be in String form, a String is returned rather than an actual request object.
Default action mapper implementation, using the standard *.[ext]
(where ext usually action) pattern. The extension is looked up from the Struts configuration key struts.action.extension
.
To help with dealing with buttons and other related requirements, this mapper (and other ActionMapper
s, we hope) has the ability to name a button with some predefined prefix and have that button name alter the execution behaviour.
The four prefixes are:
method:default
action:dashboard
In addition to these four prefixes, this mapper also understands the action naming pattern of foo!bar
in either the extension form (eg: foo!bar.action
) or in the prefix form (eg: action:foo!bar
). This syntax tells this mapper to map to the action named foo
and the method bar
.
NOTE: By default support for the
action:
prefix has been disabled since Struts 2.3.15.3, please use the below constant to enable it:
- using
struts.properties
:struts.mapper.action.prefix.enabled=true- or using
struts.xml
:<constant name="struts.mapper.action.prefix.enabled" value="true"/>See S2-018 for more details.
With method-prefix, instead of calling baz action‘s execute()
method (by default if it isn’t overridden in struts.xml
to be something else), the baz action's anotherMethod()
will be called. A very elegant way determine which button is clicked. Alternatively, one would have submit button set a particular value on the action when clicked, and the execute()
method decides on what to do with the setted value depending on which button is clicked.
<s:form action="baz"> <s:textfield label="Enter your name" name="person.name"/> <s:submit value="Create person"/> <s:submit method="anotherMethod" value="Cancel"/> </s:form>
With action-prefix, instead of executing baz action‘s execute()
method (by default if it isn’t overridden in struts.xml
to be something else), the anotherAction action‘s execute()
method (assuming again if it isn’t overridden with something else in struts.xml
) will be executed.
<s:form action="baz"> <s:textfield label="Enter your name" name="person.name"/> <s:submit value="Create person"/> <s:submit action="anotherAction" value="Cancel"/> </s:form>
By default the mapper will check if extracted action name matches provided RegEx, i.e. [a-zA-Z0-9._!/-]*
. You redefine this RegEx by defining a constant in struts.xml
named struts.allowed.action.names
. If action name doesn't match the RegEx a default action name will be returned which is defined as index
. You can also redefine this by specifying constant struts.default.action.name
in struts.xml
.
The same logic as above is used for extracted methods, the default RegEx ([a-zA-Z_]*[0-9]*
) is used to check if method is allowed, you can change this by setting constant struts.allowed.method.names
in struts.xml
. If method doesn't match the RegEx a default method is returned, i.e. execute
. This can be changed by defining constant struts.default.method.name
in struts.xml
.
Please note that this functionality only works when Dynamic Method Invocation is enabled.
You can define your own ActionMapper by implementing org.apache.struts2.dispatcher.mapper.ActionMapper
then configuring Struts 2 to use the new class in struts.xml
<bean type="org.apache.struts2.dispatcher.mapper.ActionMapper" name="mymapper" class="com.mycompany.myapp.MyActionMapper" /> <constant name="struts.mapper.class" value="mymapper" />
Possible uses of the ActionMapper include defining your own, cleaner namespaces, such as URLs like /person/1, which would be similar to a request to /getPerson.action?personID=1 using the DefaultActionMapper.
A composite action mapper that is capable of delegating to a series of if the former failed to obtained a valid ActionMapping
or uri.
It is configured through struts.xml. For example, with the following entries in struts.xml
<constant name="struts.mapper.class" value="composite" /> <constant name="struts.mapper.composite" value="struts,restful,restful2" />
When CompositeActionMapper#getMapping(HttpServletRequest, ConfigurationManager)
or CompositeActionMapper#getUriFromActionMapping(ActionMapping)
is invoked, CompositeActionMapper
would go through these s in sequence starting from identified by struts.mapper.composite.1
, followed by struts.mapper.composite.2
and finally struts.mapper.composite.3
(in this case) until either one of the return a valid result (not null) or it runs out of in which case it will just return null for both CompositeActionMapper#getMapping(HttpServletRequest, ConfigurationManager)
and CompositeActionMapper#getUriFromActionMapping(ActionMapping)
methods.
For example with the following in struts.xml:
<constant name="struts.mapper.class" value="composite" /> <constant name="struts.mapper.composite" value="struts,restful" />
CompositeActionMapper
will be configured with 2 ActionMapper, namely “struts” which is org.apache.struts2.dispatcher.mapper.DefaultActionMapper
and “restful” which is org.apache.struts2.dispatcher.mapper.RestfulActionMapper
.
CompositeActionMapper
would consult each of them in order described above.
A prefix based action mapper that is capable of delegating to other ActionMapper
s based on the request's prefix. It is configured through struts.xml
. For example, with the following entries in struts.xml
:
<constant name="struts.mapper.class" value="prefix"/> <constant name="struts.mapper.prefixMapping" value=" /communities:pseudoRestful, /communityTags:pseudoRestful, /events:pseudoRestful, /mediaList:pseudoRestful, /users:pseudoRestful, /community:struts, /communityTag:struts, /event:struts, /media:struts, /user:struts, :struts "/>
When PrefixBasedActionMapper#getMapping(HttpServletRequest, ConfigurationManager)
or PrefixBasedActionMapper#getUriFromActionMapping(ActionMapping)
is invoked, PrefixBasedActionMapper
will check each possible prefix (url prefix terminating just before a /
) to find the most specific ActionMapper
that returns a mapping when asked to map the request. If none are found, null is returned for both PrefixBasedActionMapper#getMapping(HttpServletRequest, ConfigurationManager)
and PrefixBasedActionMapper#getUriFromActionMapping(ActionMapping)
methods.
Prefix based factory should be used with org.apache.struts2.dispatcher.mapper.PrefixBasedActionMapper
to use appropriate com.opensymphony.xwork2.ActionProxyFactory
connected with given org.apache.struts2.dispatcher.mapper.ActionMapper
.
Add below entry to struts.xml
to enable the factory:
<constant name="struts.actionProxyFactory" value="prefix"/>
The factory will use the same set of patterns as defined with:
<constant name="struts.mapper.prefixMapping" value="..."/>
The ActionMapper fetches the ActionMapping object corresponding to a given request. Essentially, the ActionMapping is a data transfer object that collects together details such as the Action class and method to execute. The mapping is utilized by the Dispatcher and various user interface components. It is customizable through struts.mapper.class
entry in struts.xml
. Note that the value of this constant is the name of the bean of the new mapper.
Custom ActionMapper must implement ActionMapper interface and have a default constructor.
<bean type="org.apache.struts2.dispatcher.mapper.ActionMapper" name="mymapper" class="com.mycompany.myapp.MyActionMapper" /> <constant name="struts.mapper.class" value="mymapper" />
public class MyCustomActionMapper implements ActionMapper { public ActionMapping getMapping(HttpServletRequest request, ConfigurationManager configManager) { .... } public String getUriFromActionMapping(ActionMapping mapping) { .... } }
See also: RestfulActionMapper