
= Compiling

This document explains how to compile Sqoop.

////
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at

  http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
////


== Build Dependencies

Compiling Sqoop requires the following tools:

* Apache ant (1.7.1)
* Java JDK 1.6

Additionally, building the documentation requires these tools:

* asciidoc
* make
* python 2.5+
* xmlto
* tar
* gzip

Furthermore, Sqoop's build can be instrumented with the following:

* findbugs (1.3.9) for code quality checks
* cobertura (1.9.4.1) for code coverage
* checkstyle (5.x) for code style checks

== The Basics

Sqoop is compiled with ant. Type +ant -p+ to see the list of available targets.

Type +ant+ to compile all java sources. You can then run Sqoop with +bin/sqoop+.

If you want to build everything (including the documentation), type
+ant package+. This will appear in the
+build/sqoop-(version)/+ directory.

This version of Sqoop is built against Hadoop 0.23 available from Apache
maven repository by default. These dependencies are obtained via IVY which
downloads the necessary binaries.

== Testing Sqoop

Sqoop has several unit tests which can be run with +ant test+. This command
will run all the "basic" checks against an in-memory database, HSQLDB.

Sqoop also has compatibility tests that check its ability to work with
several third-party databases. To enable these tests, you will need to install
and configure the databases, and download the JDBC drivers for each one.

=== MySQL

Install MySQL server and client 5.0. Download MySQL Connector/J 5.0.8 for
JDBC. Instructions for configuring the MySQL database are in MySQLAuthTest
and DirectMySQLTest.

Use the system property sqoop.test.mysql.connectstring.host_url to specify the
URL for the MySQL host used for testing. Specify this property on the command
line or via the build.properties file. For example:

sqoop.test.mysql.connectstring.host_url=jdbc:mysql://host.example.com/

If not specified, the default value used for this property is:
jdbc:mysql://localhost/

=== Oracle

Install Oracle Enterprise Edition 10.2.0+. Instructions for configuring the
database are in OracleManagerTest. Download the ojdbc6_g jar.

If running the tests against Oracle XE (Express Edition) - a lot of them will
fail as it does not include the partitioning feature.

Use the system property sqoop.test.oracle.connectstring to specify the
connection string for Oracle host used for testing. Specify this property on the
command line or via the build.properties file. For example:

sqoop.test.oracle.connectstring=jdbc:oracle:thin:@//host.example.com/xe

If not specified, the default value used for this property is:
jdbc:oracle:thin:@//localhost/xe

Users sqooptest and sqooptest2 should be created prior to running the tests.
SQL script is available in src/test/oraoop/create_users.sql

=== PostgreSQL

Install PostgreSQL 8.3.9. Download the postgresql 8.4 jdbc driver. Instructions
for configuring the database are in PostgresqlTest.

Use the system property sqoop.test.postgresql.connectstring.host_url to specify
the URL for the PostgreSQL host used for testing. Specify this property on the
command line or via the build.properties file. For example:

sqoop.test.postgresql.connectstring.host_url=jdbc:postgresql://sqoop-dbs.sf.cloudera.com/

If not specified, the default value used for this property is:
jdbc:postgresql://localhost/

=== SQL Server

Install SQL Server Express 2012 and create a database instance and
download the appropriate JDBC driver. Instructions for configuring the
database can be found in SQLServerManagerImportManualTest.

Use the system property sqoop.test.sqlserver.connectstring.host_url to specify
the URL for the SQL Server host used for testing. Specify this property on the
command line or via the build.properties file. For example:

sqoop.test.sqlserver.connectstring.host_url=jdbc:sqlserver://sqlserverhost:1433

If not specified, the default value used for this property is:
jdbc:sqlserver://sqlserverhost:1433

This can be useful if you have the hostname sqlserverhost mapped to the IP
address of the SQL Server instance.

=== Cubrid

Install Cubrid 9.2.2.0003 and create a database instance and download the
appropriate JDBC driver. Instructions for configuring the database are in
CubridAuthTest, CubridCompatTest, CubridManagerImportTest
and CubridManagerExportTest.

Use the system property sqoop.test.cubrid.connectstring.host_url to specify the
URL for the Cubrid host used for testing. Specify this property on the command
line or via the build.properties file. For example:

sqoop.test.cubrid.connectstring.host_url=jdbc:cubrid:localhost

If not specified, the default value used for this property is:
jdbc:cubrid:localhost

=== DB2

Install DB2 9.74 Express C and download the appropriate JDBC driver.
Instructions for configuring the server can be found in
DB2ManagerImportManualTest.

Use the system property sqoop.test.db2.connectstring.host_url to specify
the URL for the DB Server host used for testing. Specify this property on
the command line or via build.properties file. For example:

sqoop.test.db2.connectstring.host_url=jdbc:db2://db2host:50000

If not specified, the default value used for this property is:
jdbc:db2://db2host:50000

This can be useful if you have the hostname db2host mapped to the IP
address of the DB2 Server instance.

=== Running the Third-party Tests

After the third-party databases are installed and configured, run:

++++
ant test -Dthirdparty=true -Dsqoop.thirdparty.lib.dir=/path/to/jdbc/drivers/
++++

This command will run all thirdparty tests except for the SQL Server test.
To run the SQL Server test, specify the property "manual" instead of "thirdparty"
as follows:

++++
ant test -Dmanual=true -Dsqoop.thirdparty.lib.dir=/path/to/jdbc/drivers/
++++

Note that +sqoop.thirdparty.lib.dir+ can also be specified in
+build.properties+.

== Code Quality Analysis

We have three tools which can be used to analyze Sqoop's code quality.

=== Findbugs

Findbugs detects common errors in programming. New patches should not
trigger additional warnings in Findbugs.

Install findbugs (1.3.9) according to its instructions. To use it,
run:

++++
ant findbugs -Dfindbugs.home=/path/to/findbugs/
++++

A report will be generated in +build/findbugs/+

=== Cobertura

Cobertura runs code coverage checks. It instruments the build and
checks that each line and conditional expression is evaluated along
all possible paths.

Install Cobertura according to its instructions. Then run a test with:

++++
ant clean
ant cobertura -Dcobertura.home=/path/to/cobertura
ant cobertura -Dcobertura.home=/path/to/cobertura \
    -Dthirdparty=true -Dsqoop.thirdparty.lib.dir=/path/to/thirdparty
++++

(You'll need to run the cobertura target twice; once against the regular
test targets, and once against the thirdparty targets.)

When complete, the report will be placed in +build/cobertura/+

New patches should come with sufficient tests for their functionality
as well as their error recovery code paths. Cobertura can help assess
whether your tests are thorough enough, or where gaps lie.

=== Checkstyle

Checkstyle enforces our style guide. There are currently a very small
number of violations of this style in the source code, but hopefully this
will remain the case. New code should not trigger additional checkstyle
warnings.

Checkstyle does not need to be installed manually; it will be retrieved via
Ivy when necessary.

To run checkstyle, execute:

++++
ant checkstyle
++++

A report will be generated as +build/checkstyle-errors.html+


== Deploying to Maven

To use Sqoop as a dependency in other projects, you can pull Sqoop into your
dependency management system through Maven.

To install Sqoop in your local +.m2+ cache, run:

++++
ant mvn-install
++++

This will install a pom and the Sqoop jar.

To deploy Sqoop to a public repository, use:

++++
ant mvn-deploy
++++

By default, this deploys to repository.cloudera.com. You can choose
the complete URL to deploy to with the +mvn.deploy.url+ property.
By default, this deploys to the "snapshots" repository. To deploy to
"staging" or "releases" on repository.cloudera.com, set the
+mvn.repo+ property accordingly.

== Releasing Sqoop

To build a full release of Sqoop, run +ant release -Dversion=(somever)+.
This will build a binary release tarball and the web-based documentation
as well as run a release audit which flags any source files which may
be missing license headers.

(The release audit can be run standalone with the +ant releaseaudit+
target.)

You must set the +version+ property explicitly; you cannot release a
snapshot. To simultaneously deploy this to a maven repository, include
the +mvn-install+ or +mvn-deploy+ targets as well.


== Using Eclipse

Running +ant eclipse+ will generate +.project+ and +.classpath+ files that
will allow you to edit Sqoop sources in Eclipse with all the library
dependencies correctly resolved. To compile the jars, you should still
use ant.


== Using a specific version of Hadoop

Now Sqoop defaults to use Hadoop 0.23 available from Apache maven repository.
To switch back to the previous version of Hadoop 0.20, for example, run:

++++
ant test -Dhadoopversion=20
++++