#!/usr/bin/perl -w
#
# <@LICENSE>
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to you under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# </@LICENSE>

use strict;
use warnings;

use FindBin;
use Getopt::Long qw(:config bundling auto_help);
use Pod::Usage;

our (
  $opt_c, $opt_s, $opt_f, $opt_a, $opt_p, $opt_x, $opt_m, $opt_t, $opt_M,
  $opt_X, $opt_L, $opt_l, $opt_i, $opt_T, $opt_o, $opt_S, $opt_P, $opt_d,
  $opt_g
);

GetOptions("c|cffile=s" => \$opt_c,
	   "s|scoreset=i" => \$opt_s, # ,, pacify stupid emacs cperl mode
	   "f|falses" => \$opt_f,
	   "a|all" => \$opt_a,
	   "p|percentages" => \$opt_p,
	   "x|extended" => \$opt_x,
	   "m|matchrules=s" => \$opt_m,
	   "t|tflags=s" => \$opt_t,
	   "M|matchlogs=s" => \$opt_M,
	   "X|excludelogs=s" => \$opt_X,
	   "L|onlylanguage=s" => \$opt_L,
	   "l|alsolanguage=s" => \$opt_l,
	   "i|ig" => \$opt_i,
	   "T|times" => \$opt_T,
	   "o|overlaps" => \$opt_o,
	   "S|scoremap" => \$opt_S,
	   "P|promotion" => \$opt_P,
	   "d|xml" => \$opt_d,
	   "g|generated" => \$opt_g
	  );

=head1 NAME

hit-frequencies - Display statistics about tests hit by a mass-check run

=head1 SYNOPSIS

hit-frequencies [options] <spam-log> <ham-log>

 Options:
    -c,--cffile=path	  Use path as the rules directory
    -s,--scoreset=n	  Use scoreset n
    -f,--falses  	  Count only false-positives/false-negatives
    -a,--all		  Report all tests (including subrules)
    -p,--percentages	  Report percentages instead of raw hits (implies -x)
    -x,--extended	  "Extended" output, include RANK, S/O and SCORE
    -m,--matchrules=re    Print rules matching the regular expression
    -t,--tflags=re	  Print only rules with tflags matching the regular expression
    -M,--matchlogs=re     Consider only logs matching the regular expression
    -X,--excludelogs=re	  Exclude logs matching this regular expression
    -L,--onlylanguage=lc  Only print language specific tests for specified lang code (try 'all')
    -l,--alsolanguage=lc  Also print language specific tests for specified lang code (try 'all')
    -i,--ig               Use IG (information gain) for ranking
    -T,--times            Display rule times (implies -x, -p)
    -o,--overlaps         Display hit overlaps against all other rules
    -S,--scoremap         Display score-map of hits
    -P,--promotion        Flag rules that meet the promotion criteria
    -d,--XML              XML output (conflicts with -x, -p)
    -g,--generated        Include generated nightly scores for sandbox rules

=head1 DESCRIPTION

B<hit-frequencies> will read the mass-check logs F<spam.log> and
F<ham.log> or the logs given on the command line. The output will
contain a summary of the number of ham and spam messages and detailed
statistics for each rule. The output will include the following
columns:

=over 4

=item OVERALL

Number of times (or percentage with B<-p>) the rule hit on
all messages (spam or ham).

=item SPAM

Number of times (or percentage with B<-p>) the rule hit on
spam messages.

=item HAM

Number of times (or percentage with B<-p>) the rule hit on
ham messages.

=item FPOS

=item FNEG

Shown only with B<-f>, these refer to the number of times (or
percentage) the rule hit on messages that were found to be false
positives or false negatives.

=item S/O

Shown only with B<-x> or B<-p>, this is the number of spam hits
divided by total number of hits (C<S/O> refers to spam divided by
overall).

=item RANK

Shown only with B<-x> or B<-p>, and when B<-i> is not used, this is a
measure that attempts to indicate how I<good> or I<useful> a test
is. The higher it is, the better the test.

=item IG

Shown only with B<-i>, this is another measure that attempts to
indicate how I<useful> a test is.

=item SCORE

Shown only with B<-x> or B<-p>, this is the current score assigned to
the rule. If B<-g> is used, the scores generated for sandbox rules from
nightly masscheck results (72_scores.cf) will be included as well.

=item NAME

This is the rule's name.

=back

=head1 BUGS

Please report bugs to http://bugzilla.spamassassin.org/

=head1 SEE ALSO

L<mass-check(1)>, L<perceptron(1)>

=cut
if ($opt_l && $opt_L) {
  pod2usage("-L/--alsolanguage and -l/--onlylanguage are mutually exclusive");
}

if ($opt_d && ($opt_x || $opt_p)) {
  pod2usage("-d/--xml conflicts with -x/--extended and -p/--percentages");
}

$opt_s = 0 if ( !defined $opt_s );

if ($opt_p) {
  $opt_x = 1;
}

if ($opt_d || $opt_T) {
  $opt_x = $opt_p = 1;
}


# as per http://wiki.apache.org/spamassassin/RulesProjPromotion, for -P
my $promote_so_min      = 0.95;
my $promote_hitrate_min = 0.02;
my $promote_fprate_max  = 1.00;


my $cffile = $opt_c || "$FindBin::Bin/../rules";

# "our" so that the require'd file can overwrite them
my $rules_pl_unparseable;
our %rules = ();
our %scores = ();

my %soratio = ();
my %freq_spam = ();
my %freq_ham = ();
my %hmap_spam = ();
my %hmap_ham = ();
my %scoremap_spam = ();
my %scoremap_ham = ();
my %freq = ();
my $num_spam = 0;
my $num_ham = 0;
my %ranking = ();
my $ok_lang = '';
my %meta_subrule_pairs = ();

my %rule_times = ();

readscores($cffile);

$ok_lang = lc ($opt_l || $opt_L || '');
if ($ok_lang eq 'all') { $ok_lang = '.'; }

if (($opt_t || $opt_o) && $rules_pl_unparseable) {
  die "-t/-o require rules.pl to be parseable";
}

foreach my $key (keys %rules) {
  if ($key eq '_scoreset') {
    delete $rules{$key}; # bug 5683
    next;
  }

  if ( ($opt_L && !$rules{$key}->{lang}) ||
       ($rules{$key}->{lang} &&
         (!$ok_lang || $rules{$key}->{lang} !~ /^$ok_lang/io)
     ) ) {
    delete $rules{$key} ; next;
  }

  $freq_spam{$key} = 0;
  $freq_ham{$key} = 0;
  if ($opt_o) {
    $hmap_spam{$key} = '';
    $hmap_ham{$key} = '';
  }
}

readlogs();

my $hdr_all = $num_spam + $num_ham;
my $hdr_spam = $num_spam;
my $hdr_ham = $num_ham;

my $sorting = $opt_i ? "IG" : "RANK";

if ($opt_d) {
  $hdr_all ||= 0.00001;     # avoid div by 0 in the next 2 statements
  $hdr_spam = ($num_spam / $hdr_all) * 100.0;
  $hdr_ham = ($num_ham / $hdr_all) * 100.0;
  $opt_P = 1;

  print qq{

    <freqs>
      <allmessages>
        <count class='spam'>$num_spam</count>
        <count class='ham'>$num_spam</count>
        <pc class='spam'>$hdr_spam</pc>
        <pc class='ham'>$hdr_spam</pc>
      </allmessages>

  };

}
elsif ($opt_p) {
  printf "%7s  %7s  %7s  %6s  %6s  %6s  %s\n",
  	$opt_T?"MSECS":"OVERALL", $opt_f?"FNEG%":"SPAM%", $opt_f?"FPO%":"HAM%",
        "S/O", $sorting, "SCORE", "NAME";

  printf "%7d  %7d  %7d  %7.3f %6.2f  %6.2f  (all messages)\n",
  	0, $hdr_spam, $hdr_ham,
        soratio ($num_spam,$num_ham), 0, 0;

  $hdr_all ||= 0.00001;     # avoid div by 0 in the next 2 statements
  $hdr_spam = ($num_spam / $hdr_all) * 100.0;
  $hdr_ham = ($num_ham / $hdr_all) * 100.0;
  $hdr_all = 100.0;             # this is obvious

  printf "%7.5f  %7.4f  %7.4f  %7.3f %6.2f  %6.2f  (all messages as %%)\n",
  	0, $hdr_spam, $hdr_ham,
        soratio ($num_spam,$num_ham), 0, 0;

}
elsif ($opt_p) {
  printf "%8s %7s  %7s  %6s  %6s  %6s  %s\n",
  	"OVERALL%", $opt_f?"FNEG%":"SPAM%", $opt_f?"FPO%":"HAM%",
        "S/O", $sorting, "SCORE", "NAME";

  printf "%7d  %7d  %7d  %7.3f %6.2f  %6.2f  (all messages)\n",
  	$hdr_all, $hdr_spam, $hdr_ham,
        soratio ($num_spam,$num_ham), 0, 0;

  $hdr_all ||= 0.00001;     # avoid div by 0 in the next 2 statements
  $hdr_spam = ($num_spam / $hdr_all) * 100.0;
  $hdr_ham = ($num_ham / $hdr_all) * 100.0;
  $hdr_all = 100.0;             # this is obvious

  printf "%7.3f  %7.4f  %7.4f  %7.3f %6.2f  %6.2f  (all messages as %%)\n",
  	$hdr_all, $hdr_spam, $hdr_ham,
        soratio ($num_spam,$num_ham), 0, 0;

}
elsif ($opt_x) {
  printf "%7s %7s  %7s  %6s  %6s %6s  %s\n",
  	"OVERALL%", $opt_f?"FNEG%":"SPAM%", $opt_f?"FPOS%":"HAM%", "S/O", $sorting, "SCORE", "NAME";
  printf "%7d  %7d  %7d  %7.3f %6.2f %6.2f  (all messages)\n",
  	$hdr_all, $hdr_spam, $hdr_ham,
        soratio ($num_spam,$num_ham), 0, 0;

} else {
  printf "%10s  %10s  %10s  %s\n",
  	"OVERALL", $opt_f?"FNEG":"SPAM", $opt_f?"FPO":"HAM",
	  "NAME";
  printf "%10d  %10d  %10d  (all messages)\n",
  	$hdr_all, $hdr_spam, $hdr_ham;
}

my %done = ();
my @tests = ();
my $rank_hi = 0;
my $rank_lo = 9999999;

# variables for wanted/unwanted RANK
my %wanted;
my %unwanted;
my %isnice;
my %wranks;
my %uranks;

# rules that we want to look at
$freq{$_}++ for keys %freq_ham;
$freq{$_}++ for keys %freq_spam;
# if a rule exists in the config, we want it in the output too
$freq{$_}++ for keys %rules;

my $test;
foreach $test (keys %freq) {
  my $parsed_rules_entry = $rules{$test};

  # Allow nice T_ rules to be detected
  my $no_t = $test;
  if ($no_t =~ s/^T_//) {
    if (defined $rules{$no_t}) {
      $parsed_rules_entry = $rules{$no_t};
    }
  }

  # do not require 'tmp/rules.pl' to have been built from the
  # exact same ruleset version; this assumption screws up nightly
  # mass-check reports if they are generated with a different SVN rev
  # next unless (exists $rules{$test});

  next if (!$opt_a && $test =~ /^__/);

  next if $done{$test}; $done{$test} = 1;
  push (@tests, $test);

  my $isnice = 0;
  if ($parsed_rules_entry) {
    if ($parsed_rules_entry->{tflags} &&
            $parsed_rules_entry->{tflags} =~ /\bnice\b/)
    {
      $isnice = 1;
    }
  }
  $isnice{$test} = $isnice;

  my $fs = $freq_spam{$test}; $fs ||= 0;
  my $fn = $freq_ham{$test}; $fn ||= 0;
  my $fsadj = $num_spam == 0 ? 0 : ($fs / ($num_spam)) * 100.0;
  my $fnadj = $num_ham == 0 ? 0 : ($fn / ($num_ham)) * 100.0;

  my $soratio = $soratio{$test} = soratio ($fsadj, $fnadj);

  if ($isnice) {
    $soratio = 1.0 - $soratio;
    my $tmp = $fsadj; $fsadj = $fnadj; $fnadj = $tmp;
  }

  if ($opt_i) {
    # come up with a ranking
    my $rank;

    # IG system: from "Learning to Filter Unsolicited Commercial E-Mail",
    # Ion Androutsopoulos et al: determine the information gain IG(X, C) of the
    # Boolean attributes (ie. the rules). Measures "the average reduction in
    # the entropy of C (classification) given the value of X (the rule)". Makes
    # a good ranking measure with a proper statistical basis. ;)
    #
    # Still would like to get an entropy measure in, too.
    #
    #             sum                                    P(X = x ^ C = c)
    # IG(X,C) = x in [0, 1]    P(X = x ^ C = c) . log2( ------------------- )
    #           c in [Ch, Cs]                           P(X = x) . P(C = c)
    #
    my $safe_nspam = $num_spam || 0.0000001;
    my $safe_nham = $num_ham || 0.0000001;

    my $num_all = ($num_spam + $num_ham);
    my $safe_all = $num_all || 0.0000001;
    my $f_all = $fs+$fn;

    my $px0 = (($num_all - $f_all) / $safe_all);         # P(X = 0)
    my $px1 = ($f_all / $safe_all);                      # P(X = 1)
    my $pccs = ($num_spam / $safe_all);                  # P(C = Cs)
    my $pcch = ($num_ham / $safe_all);                   # P(C = Ch)
    my $px1ccs = ($fs / $safe_nspam);                   # P(X = 1 ^ C = Cs)
    my $px1cch = ($fn / $safe_nham);                    # P(X = 1 ^ C = Ch)
    my $px0ccs = (($num_spam - $fs) / $safe_nspam);     # P(X = 0 ^ C = Cs)
    my $px0cch = (($num_ham - $fn) / $safe_nham);       # P(X = 0 ^ C = Ch)
    my $safe_px0_dot_pccs = ($px0 * $pccs) || 0.00000001;
    my $safe_px0_dot_pcch = ($px0 * $pcch) || 0.00000001;
    my $safe_px1_dot_pccs = ($px1 * $pccs) || 0.00000001;
    my $safe_px1_dot_pcch = ($px1 * $pcch) || 0.00000001;

    sub log2 { return log($_[0]) / 0.693147180559945; } # log(2) = 0.6931...

    my $safe_px0ccs = ($px0ccs || 0.0000001);
    my $safe_px0cch = ($px0cch || 0.0000001);
    my $safe_px1ccs = ($px1ccs || 0.0000001);
    my $safe_px1cch = ($px1cch || 0.0000001);
    $rank = ( $px0ccs * log2($safe_px0ccs / $safe_px0_dot_pccs) ) +
                    ( $px0cch * log2($safe_px0cch / $safe_px0_dot_pcch) ) +
                    ( $px1ccs * log2($safe_px1ccs / $safe_px1_dot_pccs) ) +
                    ( $px1cch * log2($safe_px1cch / $safe_px1_dot_pcch) );

    $ranking{$test} = $rank;
    $rank_hi = $rank if ($rank > $rank_hi);
    $rank_lo = $rank if ($rank < $rank_lo);
  }
  else {
    # RANK: basic wanted/unwanted ranking
    #
    # The rank of each test based on two ranks: (1) the number of wanted
    # hits and (2) the number of unwanted hits.  Each test is ranked
    # positionally for both its wanted and unwanted hits (ties are
    # allowed) and the two ranks are normalized to have the same range.
    # Those two ranks are added together, producing a single RANK number
    # that is then normalized to [0, 1].  The result is equivalent to:
    #
    # RANK(rule) = (percentile(wanted) + percentile(unwanted))/2
    #
    $wanted{$test} = $isnice ? $fn : $fs;
    $unwanted{$test} = $isnice ? $fs : $fn;
    # count number of ranks of each type
    $wranks{$wanted{$test}} = 1;
    $uranks{$unwanted{$test}} = 1;
  }
}

# finish basic wanted/unwanted ranking
if (! $opt_i) {
  my @wanted = sort { $wanted{$a} <=> $wanted{$b} } keys %wanted;
  my @unwanted = sort { $unwanted{$b} <=> $unwanted{$a} } keys %unwanted;

  # first half of ranking is the wanted rank
  my $position = 0;
  my $last = undef;
  for my $test (@wanted) {
    $position++ if defined $last && $last != $wanted{$test};
    $ranking{$test} += $position;
    $last = $wanted{$test}
  }

  # second half of ranking is the unwanted rank
  my $normalize = (scalar keys %wranks) / (scalar keys %uranks || 0.001);
  $position = 0;
  $last = undef;
  for my $test (@unwanted) {
    $position++ if defined $last && $last != $unwanted{$test};
    $ranking{$test} += ($position * $normalize);
    $last = $unwanted{$test};
    $rank_hi = $ranking{$test} if ($ranking{$test} > $rank_hi);
    $rank_lo = $ranking{$test} if ($ranking{$test} < $rank_lo);
  }
}

{
  # now normalise the rankings to [0, 1]
  $rank_hi -= $rank_lo;
  foreach my $test (@tests) {
    $ranking{$test} = $rank_hi == 0 ? 0.001 : ($ranking{$test} - $rank_lo) / ($rank_hi);
  }
}

if ($opt_T) {
  read_timings();
}

foreach $test (sort { $ranking{$b} <=> $ranking{$a} } @tests) {
  my $parsed_rules_entry = $rules{$test};

  # Allow nice T_ rules to be detected
  my $no_t = $test;
  if ($no_t =~ s/^T_//) {
    if (defined $rules{$no_t}) {
      $parsed_rules_entry = $rules{$no_t};
    }
  }

  # do not require 'tmp/rules.pl' to have been built from the
  # exact same ruleset version; this assumption screws up nightly
  # mass-check reports if they are generated with a different SVN rev
  # next unless (exists $rules{$test});

  next if (!$opt_a && $test =~ /^__/);

  my $fs = $freq_spam{$test}; $fs ||= 0;
  my $fn = $freq_ham{$test}; $fn ||= 0;
  my $fa = $fs+$fn;
  my $num_fs = $fs;
  my $num_fn = $fn;
  my $num_fa = $fa;

  my $tflags = '';
  if ($parsed_rules_entry) {
    $tflags = $parsed_rules_entry->{tflags};
  }

  # match certain tests
  next if ($opt_m && $test !~ m/$opt_m/);
  # match tflags
  next if ($opt_t && (!$tflags || $tflags !~ /$opt_t/));

  if (!$opt_a && !$opt_t && $tflags) {
    # not net tests
    next if ($tflags =~ /\bnet\b/ && ($opt_s % 2 == 0));

    # not userconf
    # Jul 13 2005 jm: removed.  this blocks SPF_PASS from showing up!
    # why should userconf rules not be visible in freqs output?
    # next if ($tflags =~ /\buserconf\b/);
  }

  # adjust based on corpora sizes (and cvt to % while we're at it)
  my $fsadj = $num_spam == 0 ? 0 : ($fs / ($num_spam)) * 100.0;
  my $fnadj = $num_ham == 0 ? 0 : ($fn / ($num_ham)) * 100.0;

  if ($opt_f && $fsadj == 0 && $fnadj == 0) { next; }

  if ($opt_p) {
    my $denom = ($num_spam + $num_ham) || 0.000001; # avoid / by 0
    $fa = ($fa / $denom) * 100.0;
    $fs = $fsadj;
    $fn = $fnadj;
  }

  my $soratio = $soratio{$test};
  if (!defined $soratio) {
    $soratio{$test} = soratio ($fsadj, $fnadj);
  }

  my $promotable;
  if ($opt_P) {
    $promotable = 1;

    if ($isnice{$test}) {
      if (($soratio{$test} > (1.0 - $promote_so_min))
          || ($fn < $promote_hitrate_min)
          || ($fs >= $promote_fprate_max))
      {
        $promotable = 0;
      }
    } else {
      if (($soratio{$test} < $promote_so_min)
          || ($fs < $promote_hitrate_min)
          || ($fn >= $promote_fprate_max))
      {
        $promotable = 0;
      }
    }
  }
  my $promotable_str = $opt_P ? ($promotable ? '+ ' : '- ') : '';

  if ($opt_d) {
    print qq{
      <rule>
        <time>}.($rule_times{$test}||0).qq{</time>
        <count class='all'>$num_fa</count>
        <count class='spam'>$num_fs</count>
        <count class='ham'>$num_fn</count>
        <pc class='all'>}.sprintf("%.5f", $fa).qq{</pc>
        <pc class='spam'>}.sprintf("%.5f", $fs).qq{</pc>
        <pc class='ham'>}.sprintf("%.5f", $fn).qq{</pc>
        <so>}.sprintf("%.8f", $soratio).qq{</so>
        <rank>}.sprintf("%.8f", $ranking{$test}).qq{</rank>
        <score set='$opt_s'>}.($scores{$test}||0).qq{</score>
        <promotable>$promotable</promotable>
        <test>$test</test>
    };

  } elsif ($opt_T) {
    printf "%7.5f  %7.4f  %7.4f  %7.3f %6.2f  %6.2f  %s%s\n",
  	$rule_times{$test}||0, $fs, $fn, $soratio, $ranking{$test},
        $scores{$test}||0,
        $promotable_str, $test;

  } elsif ($opt_p) {
    printf "%7.3f  %7.4f  %7.4f  %7.3f %6.2f  %6.2f  %s%s\n",
  	$fa, $fs, $fn, $soratio, $ranking{$test}, $scores{$test}||0,
        $promotable_str, $test;

  } elsif ($opt_x) {
    printf "%7d  %7d  %7d  %7.3f %6.2f %6.2f  %s%s\n",
  	$fa, $fs, $fn, $soratio, $ranking{$test}, $scores{$test}||0,
        $promotable_str, $test;

  } else {
    printf "%10d  %10d  %10d  %s\n", $fa, $fs, $fn, $test;
  }

  if ($opt_S) {
    _print_scoremap("ham", $scoremap_ham{$test});
    _print_scoremap("spam", $scoremap_spam{$test});
  }

  if ($opt_o) {
    compute_overlaps_for_rule($test);
  }

  if ($opt_d) {
    print qq{ </rule> };
  }
}

if ($opt_d) {
  print qq{
    </freqs>
  };
}
exit;


sub _print_scoremap {
  my ($name, $smap) = @_;

  if ($opt_d) {
    print qq{ <scoremap class='$name'> };
  }

  $smap ||= { };
  my @scores = (sort { $a <=> $b } keys %{$smap});

  my $total = 0;
  foreach my $score (@scores) {
    $total += $smap->{$score};
  }

  foreach my $score (@scores) {
    my $num = $smap->{$score};
    my $pc = sprintf("%.4f", ($num / ($total||0.0001)) * 100);

    if ($opt_d) {
      print qq{
        <si score='$score' pc='$pc' count='$num' /> };

    }
    else {
      printf "  scoremap %4s: %2d %6.2f%% %4d %s\n",
          $name, $score, $pc, $num, _scoremap_graph($pc);

    }
  }

  if ($opt_d) {
    print qq{ </scoremap> };

  } else {
    print "\n";
  }
}

sub _scoremap_graph {
  my ($pc) = @_;
  return '*' x ($pc * (40/100));
}


sub readlogs {
  my $spam = $ARGV[0] || "spam.log";
  my $ham = $ARGV[1] || "ham.log";

  foreach my $file ($spam, $ham) {
    open (IN, "<$file") || die "Could not open file '$file': $!";

    my $isspam = ($file eq $spam);
    my $caught;
    my $restofline;
    my $rules;
    my $score;

    # this is very speed-sensitive code.  remove all possible
    # conditionals using an eval('..').
    my $evalstr = '
      while (<IN>) {
    ';

    if ($opt_M) {
      $evalstr .= '
        next unless /$opt_M/o;
      ';
    }
    if ($opt_X) {
      $evalstr .= '
        next if /$opt_X/o;
      ';
    }

    # note: doing the match with a regexp shaves off no less than
    # 7 opcodes. nice!

    # the additional split() is for this case:
    # ".  -20 /path  time=1112116980,scantime=0,format=f,reuse=no"
    # in other words, no hits.  split(' ') cannot deal with this
    # correctly, seeing (".", "-20", "/path", "time=...etc").  Work
    # around this by using a literal / / regexp split to discard
    # the csv stuff we don't want out of the rest of the line.


    $evalstr .= '
        ($caught, $score, $restofline) = split(\' \', $_, 3);
        next unless ($caught =~ /^[Y\.]$/ && $restofline);
        (undef, $rules) = split(/ /, $restofline, 3);
	my %freq_mesg = ();
    ';

    if ($opt_f) {
      $evalstr .= '
        next if (!(($caught eq "Y") xor $isspam));
      ';
    }

    if ($opt_S) {
      $evalstr .= '
        $score = int $score;
      ';
    }

    my $hmapstr = '';
    my $smapstr = '';
    if ($isspam) {
      if ($opt_o) {
        $hmapstr = '
          if (!exists $hmap_spam{$r}) {
            $hmap_spam{$r} = "";
          }
          vec ($hmap_spam{$r}, $num_spam, 1) = 1;
        ';
      }

      if ($opt_S) {
        $smapstr = ' $scoremap_spam{$r}{$score}++; ';
      }

      $evalstr .= '
        foreach my $r (split(/,/, $rules)) {
          $freq_spam{$r}++ unless $freq_mesg{$r}++;
          '.$hmapstr.$smapstr.'
        }
        $num_spam++;
      ';
    } else {
      if ($opt_o) {
        $hmapstr = '
          if (!exists $hmap_ham{$r}) {
            $hmap_ham{$r} = "";
          }
          vec ($hmap_ham{$r}, $num_ham, 1) = 1;
        ';
      }

      if ($opt_S) {
        $smapstr = ' $scoremap_ham{$r}{$score}++; ';
      }

      $evalstr .= '
        foreach my $r (split(/,/, $rules)) {
          $freq_ham{$r}++ unless $freq_mesg{$r}++;
          '.$hmapstr.$smapstr.'
        }
        $num_ham++;
      ';
    }
    $evalstr .= '
      }
    ';

    # warn "JMD $evalstr";
    eval $evalstr;

    if ($@) {
      die $@;
    }

    close IN;
  }
  # paranoia: remove zero length rules
  delete $freq_spam{''};
  delete $hmap_spam{''};
  delete $freq_ham{''};
  delete $hmap_ham{''};
}

sub compute_overlaps_for_rule {
  my ($r1) = @_;

  my %overlaps_ham1 = ();
  my %overlaps_spam1 = ();
  my %overlaps_ham2 = ();
  my %overlaps_spam2 = ();
  my %overlaps_ham1r = ();
  my %overlaps_spam1r = ();

  if ($freq_spam{$r1}) {
    foreach my $r2 (keys %hmap_spam) {
      next if $r1 eq $r2;

      my ($a1ina2, $a2ina1) = _hmap_to_overlap_ratio ($r2, $r1,
                                      $hmap_spam{$r2}, $hmap_spam{$r1});

      if ($a1ina2 > 0)
      {
        $overlaps_spam1r{$r2} = $a1ina2;

        if (exists $overlaps_spam1{$a1ina2})
        { $overlaps_spam1{$a1ina2} .= " ".$r2."[$a2ina1]"; }
        else { $overlaps_spam1{$a1ina2} = $r2."[$a2ina1]"; }

        if (exists $overlaps_spam2{$a2ina1})
        { $overlaps_spam2{$a2ina1} .= " ".$r2."[$a2ina1]"; }
        else { $overlaps_spam2{$a2ina1} = $r2."[$a2ina1]"; }
      }
    }
  }

  if ($freq_ham{$r1}) {
    foreach my $r2 (keys %hmap_ham) {
      next if $r1 eq $r2;

      my ($a1ina2, $a2ina1) = _hmap_to_overlap_ratio ($r1, $r2,
                                      $hmap_ham{$r2}, $hmap_ham{$r1});

      if ($a1ina2 > 0)
      {
        $overlaps_ham1r{$r2} = $a1ina2;

        if (exists $overlaps_ham1{$a1ina2})
        { $overlaps_ham1{$a1ina2} .= " ".$r2."[$a2ina1]"; }
        else { $overlaps_ham1{$a1ina2} = $r2."[$a2ina1]"; }

        if (exists $overlaps_ham2{$a2ina1})
        { $overlaps_ham2{$a2ina1} .= " ".$r2."[$a1ina2]"; }
        else { $overlaps_ham2{$a2ina1} = $r2."[$a1ina2]"; }
      }
    }
  }

  _print_overlap_ratios($r1, \%overlaps_spam1, \%overlaps_spam2, "spam", \%overlaps_ham1r, "ham");
  _print_overlap_ratios($r1, \%overlaps_ham1, \%overlaps_ham2, "ham", \%overlaps_spam1r, "spam");
}

sub _print_overlap_ratios {
  my ($r1, $hash1, $hash2, $type, $hash_other_type, $other_type) = @_;

  return unless defined $r1;

  if ($opt_d) {
    print qq{ <overlap class='$type'> };
  }

  my %other_type_rules = %$hash_other_type;

  foreach my $ratio (sort { $b <=> $a } keys %$hash1) {
    $ratio ||= 0;
    last if ($ratio < 20 && $type eq 'spam');	# 20% cutoff for spam
    #last if ($ratio < 1 && $type eq 'ham');	# follow ham all the way to zero for tuning analysis unless this is uncommented and set
    my $rules = _prettify_overlap_rules($r1, $hash1->{$ratio});
    next if ($rules eq '');

    foreach my $r2 (split(' ', $rules)) {
      $r2 =~ s/\[(.*?)\]$//;
      my $reverse_ratio = $1 || 0;
      next unless defined $r2;

      ## If the ham hits are negligible, and there are spam hits, then it's not useful for tuning - skip
      #next if ($ratio < 2 && $type eq 'ham' && exists $other_type_rules{$r2} );

      my $is_subrule = ($meta_subrule_pairs{"$r1.$r2"}
                      || $meta_subrule_pairs{"$r2.$r1"});

      if ($opt_d) {
        print qq{
          <overlappair>
            <overlaprules ratio='$ratio'><r1>$r2</r1><r2>$r1</r2></overlaprules>
            <overlaprules ratio='$reverse_ratio'><r1>$r1</r1><r2>$r2</r2></overlaprules>
          </overlappair>
        };

      } else {
        printf "  overlap %4s: %3d%% of %s hits also hit %s; %3d%% of %s hits also hit %s%s%s\n",
                    $type, $ratio, $r1, $r2,
                    $reverse_ratio, $r2, $r1,
                    ($is_subrule ? ' (meta rule and subrule)' : ''),
                    (exists $other_type_rules{$r2} ? " ($other_type $other_type_rules{$r2}%)" : " (no $other_type)")
        ;
      }
    }
  }

  if ($opt_d) {
    print qq{ </overlap };
  }
}

sub _prettify_overlap_rules {
  my ($rule, $str) = @_;

  my @rules = sort split(' ', $str);
  if ($rules{$rule} && $rules{$rule}->{type} eq 'meta') {
    # ignore meta-subrules that match the rule they make up.
    # TODO: this is simplistic; it doesn't look to see if those subrules
    # are in turn meta rules with further subrules that should be ignored.
    # but it works well enough...

    my $code = $rules{$rule}->{code};
    @rules = grep {
      my $tmp = $_;
      $tmp =~ s/\[.*\]$//;
      if ($code =~ /\b\Q${tmp}\E\b/) {
        $meta_subrule_pairs{"$rule.$tmp"} = 1;
        0;
      } else {
        1;
      }
    } @rules;
  }
  return join (' ', @rules);
}

sub _hmap_to_overlap_ratio {
  my ($r1, $r2, $hmap1, $hmap2) = @_;

  # my $i; for ($i = 0; $i < length($hmap1)*8; $i++) { print vec($hmap1,$i,1); } print "\n"; for ($i = 0; $i < length($hmap2)*8; $i++) { print vec($hmap2,$i,1); } print "\n";

  # count bits in each, so we can show when one is fully subsumed by another
  # with perl's support for bitstring ops, we get C speed here, nice!

  # no hits on either? this would normally give a 100% hitrate match,
  # but that's misleading -- so hide it by giving it a 0% overlap.
  #
  # also, ignore cases where there are no hits on *one* of the rules,
  # while there are hits on the other -- after all, if one rule doesn't
  # have a single hit, it cannot overlap.

  my $a1 = unpack("%32b*", $hmap1);
  return (0,0) unless $a1;
  my $a2 = unpack("%32b*", $hmap2);
  return (0,0) unless $a2;

  my $a1_and_a2 = unpack("%32b*", ($hmap1 & $hmap2));

  # ceiling rather than truncate, so that small overlaps are not lost
  my $a1_in_a2 = int ((($a1_and_a2 / ($a2 || 0.0001))*100) + 0.99);
  my $a2_in_a1 = int ((($a1_and_a2 / ($a1 || 0.0001))*100) + 0.99);

  return ($a1_in_a2, $a2_in_a1);
}


sub readscores {
  my($cffile) = @_;
  my $tmpf = "tmp/rules$$.pl";
  my $genscores = "";
  if ($opt_g) {
    $genscores = "-d \"$FindBin::Bin/../rulesrc/scores\"";
  }
  if (system (
      "$FindBin::Bin/../build/parse-rules-for-masses -d \"$cffile\" $genscores -s $opt_s -o $tmpf"
    ))
  {
    warn "parse-rules-for-masses failed!";
  }
  eval {
    require "./$tmpf";
  };
  if ($@) {
    warn "$tmpf is unparseable: $@";
    $rules_pl_unparseable = 1;
    # carry on anyway (for most uses); leave the tmp file behind for
    # possible debugging
  } else {
    $rules_pl_unparseable = 0;
    unlink $tmpf;
  }
}

sub soratio {
  my ($s, $n) = @_;

  $s ||= 0;
  $n ||= 0;

  if ($s + $n > 0) {
      return $s / ($s + $n);
  } else {
      return 0.5;		# no results -> not effective
  }
}

sub read_timings {
  if (!open (IN, "<timing.log")) {
    warn "hit-frequencies: cannot read 'timing.log', timings will be 0";
    return;
  }
  my $ver = <IN>;
  if ($ver !~ /^v1/) {
    warn "hit-frequencies: unknown version in 'timing.log', timings will be 0";
    close IN;
    return;
  }
  while (<IN>) {
    if (/^T\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)/) {
      my ($name, $duration, $max, $runs) = ($1,$2,$3,$4);
      $rule_times{$name} = ($duration / ($runs||0.00001)) * 1000;
    }
  }
  close IN;
}