The Configuration Vocabulary lists all available configurations provided by application.yml.
The main configuration is provided by application.yml. It divided into several modules, each of which has its own settings. The following table lists the modules and their settings.
| Module | Provider | Settings | Value(s) and Explanation | System Environment Variable¹ | Default |
|---|---|---|---|---|---|
| core | default | role | Option values: Mixed/Receiver/Aggregator. Receiver mode OAP opens the service to the agents, then analyzes and aggregates the results, and forwards the results for distributed aggregation. Aggregator mode OAP receives data from Mixer and Receiver role OAP nodes, and performs 2nd level aggregation. Mixer means both Receiver and Aggregator. | SW_CORE_ROLE | Mixed |
| - | - | restHost | Binding IP of RESTful services. Services include GraphQL query and HTTP data report. | SW_CORE_REST_HOST | 0.0.0.0 |
| - | - | restPort | Binding port of RESTful services. | SW_CORE_REST_PORT | 12800 |
| - | - | restContextPath | Web context path of RESTful services. | SW_CORE_REST_CONTEXT_PATH | / |
| - | - | restIdleTimeOut | Connector idle timeout of RESTful services (in milliseconds). | SW_CORE_REST_IDLE_TIMEOUT | 30000 |
| - | - | restAcceptQueueSize | ServerSocketChannel Backlog of RESTful services. | SW_CORE_REST_QUEUE_SIZE | 0 |
| - | - | httpMaxRequestHeaderSize | Maximum request header size accepted. | SW_CORE_HTTP_MAX_REQUEST_HEADER_SIZE | 8192 |
| - | - | gRPCHost | Binding IP of gRPC services, including gRPC data report and internal communication among OAP nodes. | SW_CORE_GRPC_HOST | 0.0.0.0 |
| - | - | gRPCPort | Binding port of gRPC services. | SW_CORE_GRPC_PORT | 11800 |
| - | - | gRPCSslEnabled | Activates SSL for gRPC services. | SW_CORE_GRPC_SSL_ENABLED | false |
| - | - | gRPCSslKeyPath | File path of gRPC SSL key. | SW_CORE_GRPC_SSL_KEY_PATH | - |
| - | - | gRPCSslCertChainPath | File path of gRPC SSL cert chain. | SW_CORE_GRPC_SSL_CERT_CHAIN_PATH | - |
| - | - | gRPCSslTrustedCAPath | File path of gRPC trusted CA. | SW_CORE_GRPC_SSL_TRUSTED_CA_PATH | - |
| - | - | downsampling | Activated level of down sampling aggregation. | Hour,Day | |
| - | - | enableDataKeeperExecutor | Controller of TTL scheduler. Once disabled, TTL wouldn't work. | SW_CORE_ENABLE_DATA_KEEPER_EXECUTOR | true |
| - | - | dataKeeperExecutePeriod | Execution period of TTL scheduler (in minutes). Execution doesn't mean deleting data. The storage provider (e.g. ElasticSearch storage) could override this. | SW_CORE_DATA_KEEPER_EXECUTE_PERIOD | 5 |
| - | - | recordDataTTL | The lifecycle of record data (in days). Record data includes traces, top N sample records, and logs. Minimum value is 2. | SW_CORE_RECORD_DATA_TTL | 3 |
| - | - | metricsDataTTL | The lifecycle of metrics data (in days), including metadata. We recommend setting metricsDataTTL >= recordDataTTL. Minimum value is 2. | SW_CORE_METRICS_DATA_TTL | 7 |
| - | - | l1FlushPeriod | The period of L1 aggregation flush to L2 aggregation (in milliseconds). | SW_CORE_L1_AGGREGATION_FLUSH_PERIOD | 500 |
| - | - | storageSessionTimeout | The threshold of session time (in milliseconds). Default value is 70000. | SW_CORE_STORAGE_SESSION_TIMEOUT | 70000 |
| - | - | persistentPeriod | The period of doing data persistence. Unit is second.Default value is 25s | SW_CORE_PERSISTENT_PERIOD | 25 |
| - | - | topNReportPeriod | The execution period (in minutes) of top N sampler, which saves sampled data into the storage. | SW_CORE_TOPN_REPORT_PERIOD | 10 |
| - | - | activeExtraModelColumns | Appends entity names (e.g. service names) into metrics storage entities. | SW_CORE_ACTIVE_EXTRA_MODEL_COLUMNS | false |
| - | - | serviceNameMaxLength | Maximum length limit of service names. | SW_SERVICE_NAME_MAX_LENGTH | 70 |
| - | - | instanceNameMaxLength | Maximum length limit of service instance names. The maximum length of service + instance names should be less than 200. | SW_INSTANCE_NAME_MAX_LENGTH | 70 |
| - | - | endpointNameMaxLength | Maximum length limit of endpoint names. The maximum length of service + endpoint names should be less than 240. | SW_ENDPOINT_NAME_MAX_LENGTH | 150 |
| - | - | searchableTracesTags | Defines a set of span tag keys which are searchable through GraphQL. Multiple values are separated by commas. The max length of key=value should be less than 256 or will be dropped. | SW_SEARCHABLE_TAG_KEYS | http.method,http.status_code,rpc.status_code,db.type,db.instance,mq.queue,mq.topic,mq.broker |
| - | - | searchableLogsTags | Defines a set of log tag keys which are searchable through GraphQL. Multiple values are separated by commas. The max length of key=value should be less than 256 or will be dropped. | SW_SEARCHABLE_LOGS_TAG_KEYS | level |
| - | - | searchableAlarmTags | Defines a set of alarm tag keys which are searchable through GraphQL. Multiple values are separated by commas. The max length of key=value should be less than 256 or will be dropped. | SW_SEARCHABLE_ALARM_TAG_KEYS | level |
| - | - | autocompleteTagKeysQueryMaxSize | The max size of tags keys for autocomplete select. | SW_AUTOCOMPLETE_TAG_KEYS_QUERY_MAX_SIZE | 100 |
| - | - | autocompleteTagValuesQueryMaxSize | The max size of tags values for autocomplete select. | SW_AUTOCOMPLETE_TAG_VALUES_QUERY_MAX_SIZE | 100 |
| - | - | gRPCThreadPoolSize | Pool size of gRPC server. | SW_CORE_GRPC_THREAD_POOL_SIZE | Default to gRPC's implementation, which is a cached thread pool that can grow infinitely. |
| - | - | maxConcurrentCallsPerConnection | The maximum number of concurrent calls permitted for each incoming connection. Defaults to no limit. | SW_CORE_GRPC_MAX_CONCURRENT_CALL | - |
| - | - | maxMessageSize | Sets the maximum message size allowed to be received on the server. Empty means 4 MiB. | SW_CORE_GRPC_MAX_MESSAGE_SIZE | 52428800 (50MB) |
| - | - | remoteTimeout | Timeout for cluster internal communication (in seconds). | - | 20 |
| - | - | maxSizeOfNetworkAddressAlias | The maximum size of network address detected in the system being monitored. | - | 1_000_000 |
| - | - | maxPageSizeOfQueryProfileSnapshot | The maximum size for snapshot analysis in an OAP query. | - | 500 |
| - | - | maxSizeOfAnalyzeProfileSnapshot | The maximum number of snapshots analyzed by the OAP. | - | 12000 |
| - | - | prepareThreads | The number of threads used to prepare metrics data to the storage. | SW_CORE_PREPARE_THREADS | 2 |
| - | - | enableEndpointNameGroupingByOpenapi | Automatically groups endpoints by the given OpenAPI definitions. | SW_CORE_ENABLE_ENDPOINT_NAME_GROUPING_BY_OPENAPI | true |
| - | - | maxDurationOfQueryEBPFProfilingData | The maximum duration(in second) of query the eBPF profiling data from database. | - | 30 |
| - | - | maxThreadCountOfQueryEBPFProfilingData | The maximum thread count of query the eBPF profiling data from database. | - | System CPU core size |
| - | - | uiMenuRefreshInterval | The period(in seconds) of refreshing the status of all UI menu items. | - | 20 |
| - | - | serviceCacheRefreshInterval | The period(in seconds) of refreshing the service cache. | SW_SERVICE_CACHE_REFRESH_INTERVAL | 10 |
| - | - | enableHierarchy | If disable the hierarchy, the service and instance hierarchy relation will not be built. And the query of hierarchy will return empty result. All the hierarchy relations are defined in the hierarchy-definition.yml. Notice: some of the configurations only available for kubernetes environments. | SW_CORE_ENABLE_HIERARCHY | true |
| - | - | maxHeapMemoryUsagePercent | The int value of the max heap memory usage percent. | SW_CORE_MAX_HEAP_MEMORY_USAGE_PERCENT | 96 (96%) |
| - | - | maxDirectMemoryUsage | The long value of the max direct memory usage. The default max value is -1, representing no limit. The unit is in bytes. | SW_CORE_MAX_DIRECT_MEMORY_USAGE | -1 |
| cluster | standalone | - | Standalone is not suitable for running on a single node running. No configuration available. | - | - |
| - | zookeeper | namespace | The namespace, represented by root path, isolates the configurations in Zookeeper. | SW_NAMESPACE | /, root path |
| - | - | hostPort | Hosts and ports of Zookeeper Cluster. | SW_CLUSTER_ZK_HOST_PORT | localhost:2181 |
| - | - | baseSleepTimeMs | The period of Zookeeper client between two retries (in milliseconds). | SW_CLUSTER_ZK_SLEEP_TIME | 1000 |
| - | - | maxRetries | The maximum retry time. | SW_CLUSTER_ZK_MAX_RETRIES | 3 |
| - | - | enableACL | Opens ACL using schema and expression. | SW_ZK_ENABLE_ACL | false |
| - | - | schema | Schema for the authorization. | SW_ZK_SCHEMA | digest |
| - | - | expression | Expression for the authorization. | SW_ZK_EXPRESSION | skywalking:skywalking |
| - | - | internalComHost | The hostname registered in Zookeeper for the internal communication of OAP cluster. | SW_CLUSTER_INTERNAL_COM_HOST | - |
| - | - | internalComPort | The port registered in Zookeeper for the internal communication of OAP cluster. | SW_CLUSTER_INTERNAL_COM_PORT | -1 |
| - | kubernetes | namespace | Namespace deployed by SkyWalking in k8s. | SW_CLUSTER_K8S_NAMESPACE | default |
| - | - | labelSelector | Labels used for filtering OAP deployment in k8s. | SW_CLUSTER_K8S_LABEL | app=collector,release=skywalking |
| - | - | uidEnvName | Environment variable name for reading uid. | SW_CLUSTER_K8S_UID | SKYWALKING_COLLECTOR_UID |
| - | consul | serviceName | Service name for SkyWalking cluster. | SW_SERVICE_NAME | SkyWalking_OAP_Cluster |
| - | - | hostPort | Hosts and ports for Consul cluster. | SW_CLUSTER_CONSUL_HOST_PORT | localhost:8500 |
| - | - | aclToken | ACL Token of Consul. Empty string means without ALC token. | SW_CLUSTER_CONSUL_ACLTOKEN | - |
| - | - | internalComHost | The hostname registered in Consul for internal communications of the OAP cluster. | SW_CLUSTER_INTERNAL_COM_HOST | - |
| - | - | internalComPort | The port registered in Consul for internal communications of the OAP cluster. | SW_CLUSTER_INTERNAL_COM_PORT | -1 |
| - | etcd | serviceName | Service name for SkyWalking cluster. | SW_CLUSTER_ETCD_SERVICE_NAME | SkyWalking_OAP_Cluster |
| - | - | endpoints | Hosts and ports for etcd cluster. | SW_CLUSTER_ETCD_ENDPOINTS | localhost:2379 |
| - | - | namespace | Namespace for SkyWalking cluster. | SW_CLUSTER_ETCD_NAMESPACE | /skywalking |
| - | - | authentication | Indicates whether there is authentication. | SW_CLUSTER_ETCD_AUTHENTICATION | false |
| - | - | user | Etcd auth username. | SW_CLUSTER_ETCD_USER | |
| - | - | password | Etcd auth password. | SW_CLUSTER_ETCD_PASSWORD | |
| - | - | internalComHost | The hostname registered in etcd for internal communications of the OAP cluster. | SW_CLUSTER_INTERNAL_COM_HOST | - |
| - | - | internalComPort | The port registered in etcd for internal communications of the OAP cluster. | SW_CLUSTER_INTERNAL_COM_PORT | -1 |
| - | Nacos | serviceName | Service name for SkyWalking cluster. | SW_SERVICE_NAME | SkyWalking_OAP_Cluster |
| - | - | hostPort | Hosts and ports for Nacos cluster. | SW_CLUSTER_NACOS_HOST_PORT | localhost:8848 |
| - | - | namespace | Namespace used by SkyWalking node coordination. | SW_CLUSTER_NACOS_NAMESPACE | public |
| - | - | internalComHost | The hostname registered in Nacos for internal communications of the OAP cluster. | SW_CLUSTER_INTERNAL_COM_HOST | - |
| - | - | internalComPort | The port registered in Nacos for internal communications of the OAP cluster. | SW_CLUSTER_INTERNAL_COM_PORT | -1 |
| - | - | contextPath | Nacos set contextPath. | SW_CLUSTER_NACOS_CONTEXT_PATH | - |
| - | - | username | Nacos Auth username. | SW_CLUSTER_NACOS_USERNAME | - |
| - | - | password | Nacos Auth password. | SW_CLUSTER_NACOS_PASSWORD | - |
| - | - | accessKey | Nacos Auth accessKey. | SW_CLUSTER_NACOS_ACCESSKEY | - |
| - | - | secretKey | Nacos Auth secretKey. | SW_CLUSTER_NACOS_SECRETKEY | - |
| - | - | syncPeriodHttpUriRecognitionPattern | The period of HTTP URI recognition pattern synchronization (in seconds). | SW_CORE_SYNC_PERIOD_HTTP_URI_RECOGNITION_PATTERN | 10 |
| - | - | trainingPeriodHttpUriRecognitionPattern | The period of HTTP URI recognition pattern training (in seconds). | SW_CORE_TRAINING_PERIOD_HTTP_URI_RECOGNITION_PATTERN | 60 |
| - | - | maxHttpUrisNumberPerService | The maximum number of HTTP URIs per service. | SW_MAX_HTTP_URIS_NUMBER_PER_SERVICE | 3000 |
| storage | elasticsearch | - | ElasticSearch (and OpenSearch) storage implementation. | - | - |
| - | - | namespace | Prefix of indexes created and used by SkyWalking. | SW_NAMESPACE | - |
| - | - | clusterNodes | ElasticSearch cluster nodes for client connection. | SW_STORAGE_ES_CLUSTER_NODES | localhost |
| - | - | protocol | HTTP or HTTPs. | SW_STORAGE_ES_HTTP_PROTOCOL | HTTP |
| - | - | connectTimeout | Connect timeout of ElasticSearch client (in milliseconds). | SW_STORAGE_ES_CONNECT_TIMEOUT | 3000 |
| - | - | socketTimeout | Socket timeout of ElasticSearch client (in milliseconds). | SW_STORAGE_ES_SOCKET_TIMEOUT | 30000 |
| - | - | responseTimeout | Response timeout of ElasticSearch client (in milliseconds), 0 disables the timeout. | SW_STORAGE_ES_RESPONSE_TIMEOUT | 15000 |
| - | - | numHttpClientThread | The number of threads for the underlying HTTP client to perform socket I/O. If the value is <= 0, the number of available processors will be used. | SW_STORAGE_ES_NUM_HTTP_CLIENT_THREAD | 0 |
| - | - | user | Username of ElasticSearch cluster. | SW_ES_USER | - |
| - | - | password | Password of ElasticSearch cluster. | SW_ES_PASSWORD | - |
| - | - | trustStorePath | Trust JKS file path. Only works when username and password are enabled. | SW_STORAGE_ES_SSL_JKS_PATH | - |
| - | - | trustStorePass | Trust JKS file password. Only works when username and password are enabled. | SW_STORAGE_ES_SSL_JKS_PASS | - |
| - | - | secretsManagementFile | Secrets management file in the properties format, including username and password, which are managed by a 3rd party tool. Capable of being updated them at runtime. | SW_ES_SECRETS_MANAGEMENT_FILE | - |
| - | - | dayStep | Represents the number of days in the one-minute/hour/day index. | SW_STORAGE_DAY_STEP | 1 |
| - | - | indexShardsNumber | Shard number of new indexes. | SW_STORAGE_ES_INDEX_SHARDS_NUMBER | 1 |
| - | - | indexReplicasNumber | Replicas number of new indexes. | SW_STORAGE_ES_INDEX_REPLICAS_NUMBER | 0 |
| - | - | specificIndexSettings | Specify the settings for each index individually. If configured, this setting has the highest priority and overrides the generic settings. | SW_STORAGE_ES_SPECIFIC_INDEX_SETTINGS | - |
| - | - | superDatasetDayStep | Represents the number of days in the super size dataset record index. Default value is the same as dayStep when the value is less than 0. | SW_STORAGE_ES_SUPER_DATASET_DAY_STEP | -1 |
| - | - | superDatasetIndexShardsFactor | Super dataset is defined in the code (e.g. trace segments). This factor provides more shards for the super dataset: shards number = indexShardsNumber * superDatasetIndexShardsFactor. This factor also affects Zipkin and Jaeger traces. | SW_STORAGE_ES_SUPER_DATASET_INDEX_SHARDS_FACTOR | 5 |
| - | - | superDatasetIndexReplicasNumber | Represents the replicas number in the super size dataset record index. | SW_STORAGE_ES_SUPER_DATASET_INDEX_REPLICAS_NUMBER | 0 |
| - | - | indexTemplateOrder | The order of index template. | SW_STORAGE_ES_INDEX_TEMPLATE_ORDER | 0 |
| - | - | bulkActions | Async bulk size of the record data batch execution. | SW_STORAGE_ES_BULK_ACTIONS | 5000 |
| - | - | batchOfBytes | A threshold to control the max body size of ElasticSearch Bulk flush. | SW_STORAGE_ES_BATCH_OF_BYTES | 10485760 (10m) |
| - | - | flushInterval | Period of flush (in seconds). Does not matter whether bulkActions is reached or not. | SW_STORAGE_ES_FLUSH_INTERVAL | 5 |
| - | - | concurrentRequests | The number of concurrent requests allowed to be executed. | SW_STORAGE_ES_CONCURRENT_REQUESTS | 2 |
| - | - | resultWindowMaxSize | The maximum size of dataset when the OAP loads cache, such as network aliases. | SW_STORAGE_ES_QUERY_MAX_WINDOW_SIZE | 10000 |
| - | - | metadataQueryMaxSize | The maximum size of metadata per query. | SW_STORAGE_ES_QUERY_MAX_SIZE | 10000 |
| - | - | scrollingBatchSize | The batch size of metadata per iteration when metadataQueryMaxSize or resultWindowMaxSize is too large to be retrieved in a single query. | SW_STORAGE_ES_SCROLLING_BATCH_SIZE | 5000 |
| - | - | segmentQueryMaxSize | The maximum size of trace segments per query. | SW_STORAGE_ES_QUERY_SEGMENT_SIZE | 200 |
| - | - | profileTaskQueryMaxSize | The maximum size of profile task per query. | SW_STORAGE_ES_QUERY_PROFILE_TASK_SIZE | 200 |
| - | - | asyncProfilerTaskQueryMaxSize | The maximum size of async-profiler task per query. | SW_STORAGE_ES_QUERY_ASYNC_PROFILER_TASK_SIZE | 200 |
| - | - | profileDataQueryScrollBatchSize | The batch size of query profiling data. | SW_STORAGE_ES_QUERY_PROFILE_DATA_BATCH_SIZE | 100 |
| - | - | advanced | All settings of ElasticSearch index creation. The value should be in JSON format. | SW_STORAGE_ES_ADVANCED | - |
| - | - | logicSharding | Shard metrics and records indices into multi-physical indices, one index template per metric/meter aggregation function or record. | SW_STORAGE_ES_LOGIC_SHARDING | false |
| - | mysql | - | MySQL Storage. The MySQL JDBC Driver is not in the dist. Please copy it into the oap-lib folder manually. | - | - |
| - | - | properties | Hikari connection pool configurations. | - | Listed in the application.yaml. |
| - | - | metadataQueryMaxSize | The maximum size of metadata per query. | SW_STORAGE_MYSQL_QUERY_MAX_SIZE | 5000 |
| - | - | maxSizeOfBatchSql | The maximum size of batch size of SQL execution | SW_STORAGE_MAX_SIZE_OF_BATCH_SQL | 2000 |
| - | - | asyncBatchPersistentPoolSize | async flush data into database thread size | SW_STORAGE_ASYNC_BATCH_PERSISTENT_POOL_SIZE | 4 |
| - | postgresql | - | PostgreSQL storage. | - | - |
| - | - | properties | Hikari connection pool configurations. | - | Listed in the application.yaml. |
| - | - | metadataQueryMaxSize | The maximum size of metadata per query. | SW_STORAGE_MYSQL_QUERY_MAX_SIZE | 5000 |
| - | - | maxSizeOfBatchSql | The maximum size of batch size of SQL execution | SW_STORAGE_MAX_SIZE_OF_BATCH_SQL | 2000 |
| - | - | asyncBatchPersistentPoolSize | async flush data into database thread size | SW_STORAGE_ASYNC_BATCH_PERSISTENT_POOL_SIZE | 4 |
| - | banyandb | - | BanyanDB storage, since 10.2.0, the banyandb configuration is separated to an independent configuration file: bydb.yaml. | - | - |
| agent-analyzer | default | Agent Analyzer. | SW_AGENT_ANALYZER | default | |
| - | - | traceSamplingPolicySettingsFile | The sampling policy including sampling rate and the threshold of trace segment latency can be configured by the traceSamplingPolicySettingsFile file. | SW_TRACE_SAMPLING_POLICY_SETTINGS_FILE | trace-sampling-policy-settings.yml |
| - | - | slowDBAccessThreshold | The slow database access threshold (in milliseconds). | SW_SLOW_DB_THRESHOLD | default:200,mongodb:100 |
| - | - | forceSampleErrorSegment | When sampling mechanism is activated, this config samples the error status segment and ignores the sampling rate. | SW_FORCE_SAMPLE_ERROR_SEGMENT | true |
| - | - | segmentStatusAnalysisStrategy | Determines the final segment status from span status. Available values are FROM_SPAN_STATUS , FROM_ENTRY_SPAN, and FROM_FIRST_SPAN. FROM_SPAN_STATUS indicates that the segment status would be error if any span has an error status. FROM_ENTRY_SPAN means that the segment status would only be determined by the status of entry spans. FROM_FIRST_SPAN means that the segment status would only be determined by the status of the first span. | SW_SEGMENT_STATUS_ANALYSIS_STRATEGY | FROM_SPAN_STATUS |
| - | - | noUpstreamRealAddressAgents | Exit spans with the component in the list would not generate client-side instance relation metrics, since some tracing plugins (e.g. Nginx-LUA and Envoy) can't collect the real peer IP address. | SW_NO_UPSTREAM_REAL_ADDRESS | 6000,9000 |
| - | - | meterAnalyzerActiveFiles | Indicates which files could be instrumented and analyzed. Multiple files are split by “,”. | SW_METER_ANALYZER_ACTIVE_FILES | |
| - | - | slowCacheWriteThreshold | The threshold of slow command which is used for writing operation (in milliseconds). | SW_SLOW_CACHE_WRITE_THRESHOLD | default:20,redis:10 |
| - | - | slowCacheReadThreshold | The threshold of slow command which is used for reading (getting) operation (in milliseconds). | SW_SLOW_CACHE_READ_THRESHOLD | default:20,redis:10 |
| receiver-sharing-server | default | Sharing server provides new gRPC and restful servers for data collection. Ana designates that servers in the core module are to be used for internal communication only. | - | - | |
| - | - | restHost | Binding IP of RESTful services. Services include GraphQL query and HTTP data report. | SW_RECEIVER_SHARING_REST_HOST | - |
| - | - | restPort | Binding port of RESTful services. | SW_RECEIVER_SHARING_REST_PORT | - |
| - | - | restContextPath | Web context path of RESTful services. | SW_RECEIVER_SHARING_REST_CONTEXT_PATH | - |
| - | - | restIdleTimeOut | Connector idle timeout of RESTful services (in milliseconds). | SW_RECEIVER_SHARING_REST_IDLE_TIMEOUT | 30000 |
| - | - | restAcceptQueueSize | ServerSocketChannel backlog of RESTful services. | SW_RECEIVER_SHARING_REST_QUEUE_SIZE | 0 |
| - | - | httpMaxRequestHeaderSize | Maximum request header size accepted. | SW_RECEIVER_SHARING_HTTP_MAX_REQUEST_HEADER_SIZE | 8192 |
| - | - | gRPCHost | Binding IP of gRPC services. Services include gRPC data report and internal communication among OAP nodes. | SW_RECEIVER_GRPC_HOST | 0.0.0.0. Not Activated |
| - | - | gRPCPort | Binding port of gRPC services. | SW_RECEIVER_GRPC_PORT | Not Activated |
| - | - | gRPCThreadPoolSize | Pool size of gRPC server. | SW_RECEIVER_GRPC_THREAD_POOL_SIZE | Default to gRPC's implementation, which is a cached thread pool that can grow infinitely. |
| - | - | gRPCSslEnabled | Activates SSL for gRPC services. | SW_RECEIVER_GRPC_SSL_ENABLED | false |
| - | - | gRPCSslKeyPath | File path of gRPC SSL key. | SW_RECEIVER_GRPC_SSL_KEY_PATH | - |
| - | - | gRPCSslCertChainPath | File path of gRPC SSL cert chain. | SW_RECEIVER_GRPC_SSL_CERT_CHAIN_PATH | - |
| - | - | maxConcurrentCallsPerConnection | The maximum number of concurrent calls permitted for each incoming connection. Defaults to no limit. | SW_RECEIVER_GRPC_MAX_CONCURRENT_CALL | - |
| - | - | maxMessageSize | Sets the maximum message size allowed to be received on the server. Empty means 4 MiB. | SW_RECEIVER_GRPC_MAX_MESSAGE_SIZE | 52428800 (50MB) |
| - | - | authentication | The token text for authentication. Works for gRPC connection only. Once this is set, the client is required to use the same token. | SW_AUTHENTICATION | - |
| log-analyzer | default | Log Analyzer. | SW_LOG_ANALYZER | default | |
| - | - | lalFiles | The LAL configuration file names (without file extension) to be activated. Read LAL for more details. | SW_LOG_LAL_FILES | default |
| - | - | malFiles | The MAL configuration file names (without file extension) to be activated. Read LAL for more details. | SW_LOG_MAL_FILES | "" |
| event-analyzer | default | Event Analyzer. | SW_EVENT_ANALYZER | default | |
| receiver-register | default | gRPC and HTTPRestful services that provide service, service instance and endpoint register. | - | - | |
| receiver-trace | default | gRPC and HTTPRestful services that accept SkyWalking format traces. | - | - | |
| receiver-jvm | default | gRPC services that accept JVM metrics data. | - | - | |
| receiver-clr | default | gRPC services that accept .Net CLR metrics data. | - | - | |
| receiver-profile | default | gRPC services that accept profile task status and snapshot reporter. | - | - | |
| receiver-zabbix | default | TCP receiver accepts Zabbix format metrics. | - | - | |
| - | - | port | Exported TCP port. Zabbix agent could connect and transport data. | SW_RECEIVER_ZABBIX_PORT | 10051 |
| - | - | host | Binds to host. | SW_RECEIVER_ZABBIX_HOST | 0.0.0.0 |
| - | - | activeFiles | Enables config when agent request is received. | SW_RECEIVER_ZABBIX_ACTIVE_FILES | agent |
| service-mesh | default | gRPC services that accept data from inbound mesh probes. | - | - | |
| envoy-metric | default | Envoy metrics_service and ALS(access log service) are supported by this receiver. The OAL script supports all GAUGE type metrics. | - | - | |
| - | - | acceptMetricsService | Starts Envoy Metrics Service analysis. | SW_ENVOY_METRIC_SERVICE | true |
| - | - | alsHTTPAnalysis | Starts Envoy HTTP Access Log Service analysis. Value = k8s-mesh means starting the analysis. | SW_ENVOY_METRIC_ALS_HTTP_ANALYSIS | - |
| - | - | alsTCPAnalysis | Starts Envoy TCP Access Log Service analysis. Value = k8s-mesh means starting the analysis. | SW_ENVOY_METRIC_ALS_TCP_ANALYSIS | - |
| - | - | k8sServiceNameRule | k8sServiceNameRule allows you to customize the service name in ALS via Kubernetes metadata. The available variables are pod and service. E.g. you can use ${service.metadata.name}-${pod.metadata.labels.version} to append the version number to the service name. Note that when using environment variables to pass this configuration, use single quotes('') to avoid being evaluated by the shell. | K8S_SERVICE_NAME_RULE | ${pod.metadata.labels.(service.istio.io/canonical-name)}.${pod.metadata.namespace} |
| - | - | istioServiceNameRule | istioServiceNameRule allows you to customize the service name in ALS via Kubernetes metadata. The available variables are serviceEntry. E.g. you can use ${serviceEntry.metadata.name}-${serviceEntry.metadata.labels.version} to append the version number to the service name. Note that when using environment variables to pass this configuration, use single quotes('') to avoid being evaluated by the shell. | ISTIO_SERVICE_NAME_RULE | ${serviceEntry.metadata.name}.${serviceEntry.metadata.namespace} |
| - | - | istioServiceEntryIgnoredNamespaces | When looking up service informations from the Istio ServiceEntries, some of the ServiceEntries might be created in several namespaces automatically by some components, and OAP will randomly pick one of them to build the service name, users can use this config to exclude ServiceEntries that they don't want to be used. Comma separated. | SW_ISTIO_SERVICE_ENTRY_IGNORED_NAMESPACES | - |
| - | - | gRPCHost | Binding IP of gRPC service for Envoy access log service. | SW_ALS_GRPC_HOST | 0.0.0.0. Not Activated |
| - | - | gRPCPort | Binding port of gRPC service for Envoy access log service. | SW_ALS_GRPC_PORT | Not Activated |
| - | - | gRPCThreadPoolSize | Pool size of gRPC server. | SW_ALS_GRPC_THREAD_POOL_SIZE | Default to gRPC's implementation, which is a cached thread pool that can grow infinitely. |
| - | - | gRPCSslEnabled | Activates SSL for gRPC services. | SW_ALS_GRPC_SSL_ENABLED | false |
| - | - | gRPCSslKeyPath | File path of gRPC SSL key. | SW_ALS_GRPC_SSL_KEY_PATH | - |
| - | - | gRPCSslCertChainPath | File path of gRPC SSL cert chain. | SW_ALS_GRPC_SSL_CERT_CHAIN_PATH | - |
| - | - | maxConcurrentCallsPerConnection | The maximum number of concurrent calls permitted for each incoming connection. Defaults to no limit. | SW_ALS_GRPC_MAX_CONCURRENT_CALL | - |
| - | - | maxMessageSize | Sets the maximum message size allowed to be received on the server. Empty means 4 MiB. | SW_ALS_GRPC_MAX_MESSAGE_SIZE | 4M(based on Netty) |
| receiver-otel | default | A receiver for analyzing metrics data from OpenTelemetry. | - | - | |
| - | - | enabledHandlers | Enabled handlers for otel. | SW_OTEL_RECEIVER_ENABLED_HANDLERS | - |
| - | - | enabledOtelMetricsRules | Enabled metric rules for OTLP handler. | SW_OTEL_RECEIVER_ENABLED_OTEL_METRICS_RULES | - |
| receiver-zipkin | default | A receiver for Zipkin traces. | - | - | |
| - | - | sampleRate | The sample rate precision is 1/10000, should be between 0 and 10000 | SW_ZIPKIN_SAMPLE_RATE | 10000 |
| - | - | maxSpansPerSecond | The maximum spans to be collected per second. 0 means no limit. Spans exceeding this threshold will be dropped. | SW_ZIPKIN_MAX_SPANS_PER_SECOND | 0 |
| - | - | searchableTracesTags | Defines a set of span tag keys which are searchable. Multiple values are separated by commas. The max length of key=value should be less than 256 or will be dropped. | SW_ZIPKIN_SEARCHABLE_TAG_KEYS | http.method |
| - | - | enableHttpCollector | Enable Http Collector. | SW_ZIPKIN_HTTP_COLLECTOR_ENABLED | true |
| - | - | restHost | Binding IP of RESTful services. | SW_RECEIVER_ZIPKIN_REST_HOST | 0.0.0.0 |
| - | - | restPort | Binding port of RESTful services. | SW_RECEIVER_ZIPKIN_REST_PORT | 9411 |
| - | - | restContextPath | Web context path of RESTful services. | SW_RECEIVER_ZIPKIN_REST_CONTEXT_PATH | / |
| - | - | restIdleTimeOut | Connector idle timeout of RESTful services (in milliseconds). | SW_RECEIVER_ZIPKIN_REST_IDLE_TIMEOUT | 30000 |
| - | - | restAcceptQueueSize | Maximum request header size accepted. | SW_RECEIVER_ZIPKIN_REST_QUEUE_SIZE | 0 |
| - | - | enableKafkaCollector | Enable Kafka Collector. | SW_ZIPKIN_KAFKA_COLLECTOR_ENABLED | false |
| - | - | kafkaBootstrapServers | Kafka ConsumerConfig.BOOTSTRAP_SERVERS_CONFIG. | SW_ZIPKIN_KAFKA_SERVERS | localhost:9092 |
| - | - | kafkaGroupId | Kafka ConsumerConfig.GROUP_ID_CONFIG. | SW_ZIPKIN_KAFKA_GROUP_ID | zipkin |
| - | - | kafkaTopic | Kafka Topics. | SW_ZIPKIN_KAFKA_TOPIC | zipkin |
| - | - | kafkaConsumerConfig | Kafka consumer config, JSON format as Properties. If it contains the same key with above, would override. | SW_ZIPKIN_KAFKA_CONSUMER_CONFIG | “{"auto.offset.reset":"earliest","enable.auto.commit":true}” |
| - | - | kafkaConsumers | The number of consumers to create. | SW_ZIPKIN_KAFKA_CONSUMERS | 1 |
| - | - | kafkaHandlerThreadPoolSize | Pool size of Kafka message handler executor. | SW_ZIPKIN_KAFKA_HANDLER_THREAD_POOL_SIZE | CPU core * 2 |
| - | - | kafkaHandlerThreadPoolQueueSize | Queue size of Kafka message handler executor. | SW_ZIPKIN_KAFKA_HANDLER_THREAD_POOL_QUEUE_SIZE | 10000 |
| kafka-fetcher | default | Read SkyWalking's native metrics/logs/traces through Kafka server. | - | - | |
| - | - | bootstrapServers | A list of host/port pairs to use for establishing the initial connection to the Kafka cluster. | SW_KAFKA_FETCHER_SERVERS | localhost:9092 |
| - | - | namespace | Namespace aims to isolate multi OAP cluster when using the same Kafka cluster. If you set a namespace for Kafka fetcher, OAP will add a prefix to topic name. You should also set namespace in agent.config. The property is named plugin.kafka.namespace. | SW_NAMESPACE | - |
| - | - | groupId | A unique string that identifies the consumer group to which this consumer belongs. | - | skywalking-consumer |
| - | - | partitions | The number of partitions for the topic being created. | SW_KAFKA_FETCHER_PARTITIONS | 3 |
| - | - | consumers | The number of consumers to create. | SW_KAFKA_FETCHER_CONSUMERS | 1 |
| - | - | enableNativeProtoLog | Enables fetching and handling native proto log data. | SW_KAFKA_FETCHER_ENABLE_NATIVE_PROTO_LOG | true |
| - | - | enableNativeJsonLog | Enables fetching and handling native json log data. | SW_KAFKA_FETCHER_ENABLE_NATIVE_JSON_LOG | true |
| - | - | replicationFactor | The replication factor for each partition in the topic being created. | SW_KAFKA_FETCHER_PARTITIONS_FACTOR | 2 |
| - | - | kafkaHandlerThreadPoolSize | Pool size of Kafka message handler executor. | SW_KAFKA_HANDLER_THREAD_POOL_SIZE | CPU core * 2 |
| - | - | kafkaHandlerThreadPoolQueueSize | Queue size of Kafka message handler executor. | SW_KAFKA_HANDLER_THREAD_POOL_QUEUE_SIZE | 10000 |
| - | - | topicNameOfMeters | Kafka topic name for meter system data. | - | skywalking-meters |
| - | - | topicNameOfMetrics | Kafka topic name for JVM metrics data. | - | skywalking-metrics |
| - | - | topicNameOfProfiling | Kafka topic name for profiling data. | - | skywalking-profilings |
| - | - | topicNameOfTracingSegments | Kafka topic name for tracing data. | - | skywalking-segments |
| - | - | topicNameOfManagements | Kafka topic name for service instance reporting and registration. | - | skywalking-managements |
| - | - | topicNameOfLogs | Kafka topic name for native proto log data. | - | skywalking-logs |
| - | - | topicNameOfJsonLogs | Kafka topic name for native json log data. | - | skywalking-logs-json |
| cilium-fetcher | default | Read Cilium Observe protocol data to collect Cilium Service status. | - | - | |
| - | - | peerHost | The Cilium Peer Service Host. | SW_CILIUM_FETCHER_PEER_HOST | hubble-peer.kube-system.svc.cluster.local |
| - | - | peerPort | The Cilium Peer Service Port. | SW_CILIUM_FETCHER_PEER_PORT | 80 |
| - | - | fetchFailureRetrySecond | The Cilium fetch observe data failure retry interval(second). | SW_CILIUM_FETCHER_FETCH_FAILURE_RETRY_SECOND | 10 |
| - | - | sslConnection | The Cilium fetch protocol is TLS enabled or not. | eSW_CILIUM_FETCHER_SSL_CONNECTION | false |
| - | - | sslPrivateKeyFile | The Cilium TLS fetch private key file path. | SW_CILIUM_FETCHER_PRIVATE_KEY_FILE_PATH | "" |
| - | - | sslCertChainFile | The Cilium TLS fetch cert chain file path. | SW_CILIUM_FETCHER_CERT_CHAIN_FILE_PATH | "" |
| - | - | sslCaFile | The Cilium TLS fetch rot CA Certification file path. | SW_CILIUM_FETCHER_CA_FILE_PATH | "" |
| - | - | convertClientAsServerTraffic | The Cilium flow data should convert client to the server side not. If convert, then the server side flow would be ignored. | SW_CILIUM_FETCHER_CONVERT_CLIENT_AS_SERVER_TRAFFIC | true |
| receiver-browser | default | gRPC services that accept browser performance data and error log. | - | - | - |
| - | - | sampleRate | Sampling rate for receiving trace. Precise to 1/10000. 10000 means sampling rate of 100% by default. | SW_RECEIVER_BROWSER_SAMPLE_RATE | 10000 |
| query | graphql | - | GraphQL query implementation. | - | |
| - | - | enableLogTestTool | Enable the log testing API to test the LAL. NOTE: This API evaluates untrusted code on the OAP server. A malicious script can do significant damage (steal keys and secrets, remove files and directories, install malware, etc). As such, please enable this API only when you completely trust your users. | SW_QUERY_GRAPHQL_ENABLE_LOG_TEST_TOOL | false |
| - | - | maxQueryComplexity | Maximum complexity allowed for the GraphQL query that can be used to abort a query if the total number of data fields queried exceeds the defined threshold. | SW_QUERY_MAX_QUERY_COMPLEXITY | 3000 |
| - | - | enableUpdateUITemplate | Allow user add，disable and update UI template. | SW_ENABLE_UPDATE_UI_TEMPLATE | false |
| - | - | enableOnDemandPodLog | Ondemand Pod log: fetch the Pod logs on users' demand, the logs are fetched and displayed in real time, and are not persisted in any kind. This is helpful when users want to do some experiments and monitor the logs and see what's happing inside the service. Note: if you print secrets in the logs, they are also visible to the UI, so for the sake of security, this feature is disabled by default, please set this configuration to enable the feature manually. | SW_ENABLE_ON_DEMAND_POD_LOG | false |
| query-zipkin | default | - | This module is for Zipkin query API and support zipkin-lens UI | - | |
| - | - | restHost | Binding IP of RESTful services. | SW_QUERY_ZIPKIN_REST_HOST | 0.0.0.0 |
| - | - | restPort | Binding port of RESTful services. | SW_QUERY_ZIPKIN_REST_PORT | 9412 |
| - | - | restContextPath | Web context path of RESTful services. | SW_QUERY_ZIPKIN_REST_CONTEXT_PATH | zipkin |
| - | - | restIdleTimeOut | Connector idle timeout of RESTful services (in milliseconds). | SW_QUERY_ZIPKIN_REST_IDLE_TIMEOUT | 30000 |
| - | - | restAcceptQueueSize | Maximum request header size accepted. | SW_QUERY_ZIPKIN_REST_QUEUE_SIZE | 0 |
| - | - | lookback | Default look back for traces and autocompleteTags, 1 day in millis | SW_QUERY_ZIPKIN_LOOKBACK | 86400000 |
| - | - | namesMaxAge | The Cache-Control max-age (seconds) for serviceNames, remoteServiceNames and spanNames | SW_QUERY_ZIPKIN_NAMES_MAX_AGE | 300 |
| - | - | uiQueryLimit | Default traces query max size | SW_QUERY_ZIPKIN_UI_QUERY_LIMIT | 10 |
| - | - | uiDefaultLookback | Default look back on the UI for search traces, 15 minutes in millis | SW_QUERY_ZIPKIN_UI_DEFAULT_LOOKBACK | 900000 |
| promql | default | - | This module is for PromQL API. | - | |
| - | - | restHost | Binding IP of RESTful services. | SW_PROMQL_REST_HOST | 0.0.0.0 |
| - | - | restPort | Binding port of RESTful services. | SW_PROMQL_REST_PORT | 9090 |
| - | - | restContextPath | Web context path of RESTful services. | SW_PROMQL_REST_CONTEXT_PATH | / |
| - | - | restIdleTimeOut | Connector idle timeout of RESTful services (in milliseconds). | SW_PROMQL_REST_IDLE_TIMEOUT | 30000 |
| - | - | restAcceptQueueSize | Maximum request header size accepted. | SW_PROMQL_REST_QUEUE_SIZE | 0 |
| - | - | buildInfoVersion | Mock version for API buildInfo | SW_PROMQL_BUILD_INFO_VERSION | 2.45.0 |
| - | - | buildInfoRevision | Mock revision for API buildInfo | SW_PROMQL_BUILD_INFO_REVISION | |
| - | - | buildInfoBranch | Mock branch for API buildInfo | SW_PROMQL_BUILD_INFO_BRANCH | |
| - | - | buildInfoBuildUser | Mock build user for API buildInfo | SW_PROMQL_BUILD_INFO_BUILD_USER | |
| - | - | buildInfoBuildDate | Mock build date for API buildInfo | SW_PROMQL_BUILD_INFO_BUILD_DATE | |
| - | - | buildInfoGoVersion | Mock go version for API buildInfo | SW_PROMQL_BUILD_INFO_GO_VERSION | |
| alarm | default | - | Read alarm doc for more details. | - | |
| telemetry | - | - | Read telemetry doc for more details. | - | |
| - | none | - | No op implementation. | - | |
| - | prometheus | host | Binding host for Prometheus server fetching data. | SW_TELEMETRY_PROMETHEUS_HOST | 0.0.0.0 |
| - | - | port | Binding port for Prometheus server fetching data. | SW_TELEMETRY_PROMETHEUS_PORT | 1234 |
| configuration | - | - | Read dynamic configuration doc for more details. | - | |
| - | grpc | host | DCS server binding hostname. | SW_DCS_SERVER_HOST | - |
| - | - | port | DCS server binding port. | SW_DCS_SERVER_PORT | 80 |
| - | - | clusterName | Cluster name when reading the latest configuration from DSC server. | SW_DCS_CLUSTER_NAME | SkyWalking |
| - | - | period | The period of reading data from DSC server by the OAP (in seconds). | SW_DCS_PERIOD | 20 |
| - | - | maxInboundMessageSize | The max inbound message size of gRPC. | SW_DCS_MAX_INBOUND_MESSAGE_SIZE | 4194304 |
| - | apollo | apolloMeta | apollo.meta in Apollo. | SW_CONFIG_APOLLO | http://localhost:8080 |
| - | - | apolloCluster | apollo.cluster in Apollo. | SW_CONFIG_APOLLO_CLUSTER | default |
| - | - | apolloEnv | env in Apollo. | SW_CONFIG_APOLLO_ENV | - |
| - | - | appId | app.id in Apollo. | SW_CONFIG_APOLLO_APP_ID | skywalking |
| - | zookeeper | namespace | The namespace (represented by root path) that isolates the configurations in the Zookeeper. | SW_CONFIG_ZK_NAMESPACE | /, root path |
| - | - | hostPort | Hosts and ports of Zookeeper Cluster. | SW_CONFIG_ZK_HOST_PORT | localhost:2181 |
| - | - | baseSleepTimeMs | The period of Zookeeper client between two retries (in milliseconds). | SW_CONFIG_ZK_BASE_SLEEP_TIME_MS | 1000 |
| - | - | maxRetries | The maximum retry time. | SW_CONFIG_ZK_MAX_RETRIES | 3 |
| - | - | period | The period of data sync (in seconds). | SW_CONFIG_ZK_PERIOD | 60 |
| - | etcd | endpoints | Hosts and ports for etcd cluster (separated by commas if multiple). | SW_CONFIG_ETCD_ENDPOINTS | http://localhost:2379 |
| - | - | namespace | Namespace for SkyWalking cluster. | SW_CONFIG_ETCD_NAMESPACE | /skywalking |
| - | - | authentication | Indicates whether there is authentication. | SW_CONFIG_ETCD_AUTHENTICATION | false |
| - | - | user | Etcd auth username. | SW_CONFIG_ETCD_USER | |
| - | - | password | Etcd auth password. | SW_CONFIG_ETCD_PASSWORD | |
| - | - | period | The period of data sync (in seconds). | SW_CONFIG_ZK_PERIOD | 60 |
| - | consul | hostPort | Hosts and ports for Consul cluster. | SW_CONFIG_CONSUL_HOST_AND_PORTS | localhost:8500 |
| - | - | aclToken | ACL Token of Consul. Empty string means without ACL token. | SW_CONFIG_CONSUL_ACL_TOKEN | - |
| - | - | period | The period of data sync (in seconds). | SW_CONFIG_CONSUL_PERIOD | 60 |
| - | k8s-configmap | namespace | Deployment namespace of the config map. | SW_CLUSTER_K8S_NAMESPACE | default |
| - | - | labelSelector | Labels for locating configmap. | SW_CLUSTER_K8S_LABEL | app=collector,release=skywalking |
| - | - | period | The period of data sync (in seconds). | SW_CONFIG_ZK_PERIOD | 60 |
| - | nacos | serverAddr | Nacos Server Host. | SW_CONFIG_NACOS_SERVER_ADDR | 127.0.0.1 |
| - | - | port | Nacos Server Port. | SW_CONFIG_NACOS_SERVER_PORT | 8848 |
| - | - | group | Nacos Configuration namespace. | SW_CONFIG_NACOS_SERVER_NAMESPACE | - |
| - | - | period | The period of data sync (in seconds). | SW_CONFIG_CONFIG_NACOS_PERIOD | 60 |
| - | - | username | Nacos Auth username. | SW_CONFIG_NACOS_USERNAME | - |
| - | - | password | Nacos Auth password. | SW_CONFIG_NACOS_PASSWORD | - |
| - | - | accessKey | Nacos Auth accessKey. | SW_CONFIG_NACOS_ACCESSKEY | - |
| - | - | secretKey | Nacos Auth secretKey. | SW_CONFIG_NACOS_SECRETKEY | - |
| exporter | default | enableGRPCMetrics | Enable gRPC metrics exporter. | SW_EXPORTER_ENABLE_GRPC_METRICS | false |
| - | - | gRPCTargetHost | The host of target gRPC server for receiving export data | SW_EXPORTER_GRPC_HOST | 127.0.0.1 |
| - | - | gRPCTargetPort | The port of target gRPC server for receiving export data. | SW_EXPORTER_GRPC_PORT | 9870 |
| - | - | enableKafkaTrace | Enable Kafka trace exporter. | SW_EXPORTER_ENABLE_KAFKA_TRACE | false |
| - | - | enableKafkaLog | Enable Kafka log exporter. | SW_EXPORTER_ENABLE_KAFKA_LOG | false |
| - | - | kafkaBootstrapServers | A list of host/port pairs to use for establishing the initial connection to the Kafka cluster. | SW_EXPORTER_KAFKA_SERVERS | localhost:9092 |
| - | - | kafkaProducerConfig | Kafka producer config, JSON format as Properties. | SW_EXPORTER_KAFKA_PRODUCER_CONFIG | - |
| - | - | kafkaTopicTrace | Kafka topic name for trace. | SW_EXPORTER_KAFKA_TOPIC_TRACE | skywalking-export-trace |
| - | - | kafkaTopicLog | Kafka topic name for log. | SW_EXPORTER_KAFKA_TOPIC_LOG | skywalking-export-log |
| - | - | exportErrorStatusTraceOnly | Export error status trace segments through the Kafka channel. | SW_EXPORTER_KAFKA_TRACE_FILTER_ERROR | false |
| health-checker | default | checkIntervalSeconds | The period of checking OAP internal health status (in seconds). | SW_HEALTH_CHECKER_INTERVAL_SECONDS | 5 |
| status-query | default | ||||
| - | - | keywords4MaskingSecretsOfConfig | Include the list of keywords to filter configurations including secrets. Separate keywords by a comma. | SW_DEBUGGING_QUERY_KEYWORDS_FOR_MASKING_SECRETS | user,password,token,accessKey,secretKey,authentication |
| configuration-discovery | default | disableMessageDigest | If true, agent receives the latest configuration every time, even without making any changes. By default, OAP uses the SHA512 message digest mechanism to detect changes in configuration. | SW_DISABLE_MESSAGE_DIGEST | false |
| receiver-event | default | gRPC services that handle events data. | - | - | |
| aws-firehose-receiver | default | host | Binding IP of HTTP server | SW_RECEIVER_AWS_FIREHOSE_HTTP_HOST | 0.0.0.0 |
| - | - | port | Binding port of HTTP server | SW_RECEIVER_AWS_FIREHOSE_HTTP_PORT | 12801 |
| - | - | contextPath | Context path of HTTP server | SW_RECEIVER_AWS_FIREHOSE_HTTP_CONTEXT_PATH | / |
| - | - | idleTimeOut | Idle timeout of a connection for keep-alive. | SW_RECEIVER_AWS_FIREHOSE_HTTP_IDLE_TIME_OUT | 30000 |
| - | - | acceptQueueSize | Maximum allowed number of open connections | SW_RECEIVER_AWS_FIREHOSE_HTTP_ACCEPT_QUEUE_SIZE | 0 |
| - | - | maxRequestHeaderSize | Maximum length of all headers in an HTTP/1 response | SW_RECEIVER_AWS_FIREHOSE_HTTP_MAX_REQUEST_HEADER_SIZE | 8192 |
| - | - | firehoseAccessKey | The AccessKey of AWS firhose | SW_RECEIVER_AWS_FIREHOSE_ACCESS_KEY | |
| - | - | enableTLS | Indicate if enable HTTPS for the server | SW_RECEIVER_AWS_FIREHOSE_HTTP_ENABLE_TLS | false |
| - | - | tlsKeyPath | TLS key path | SW_RECEIVER_AWS_FIREHOSE_HTTP_TLS_KEY_PATH | |
| - | - | tlsCertChainPath | TLS certificate chain path | SW_RECEIVER_AWS_FIREHOSE_HTTP_TLS_CERT_CHAIN_PATH | |
| ai-pipeline | default | ||||
| - | - | uriRecognitionServerAddr | The address of the URI recognition server. | SW_AI_PIPELINE_URI_RECOGNITION_SERVER_ADDR | - |
| - | - | uriRecognitionServerPort | The port of the URI recognition server. | SW_AI_PIPELINE_URI_RECOGNITION_SERVER_PORT | 17128 |
| - | - | baselineServerAddr | The address of the Baseline server. | SW_API_PIPELINE_BASELINE_SERVICE_HOST | - |
| - | - | baselineServerPort | The port of the Baseline server. | SW_API_PIPELINE_BASELINE_SERVICE_PORT | 17128 |
| receiver-async-profiler | default | gRPC services that accept async-profiler task status and data reporter. | - | - | |
| - | - | jfrMaxSize | Used to manage the maximum size of the jfr file that can be received, the unit is Byte, default is 30M. | SW_RECEIVER_ASYNC_PROFILER_JFR_MAX_SIZE | 31457280 |
| - | - | memoryParserEnabled | Used to determine whether to receive jfr in memory file or physical file mode. | SW_RECEIVER_ASYNC_PROFILER_MEMORY_PARSER_ENABLED | true |
Since 10.2.0, the banyandb configuration is separated to an independent configuration file: bydb.yaml. The following table lists the configuration items:
The global settings for the whole BanyanDB:
| Settings | Value(s) and Explanation | System Environment Variable¹ | Default |
|---|---|---|---|
| targets | Hosts with ports of the BanyanDB. | SW_STORAGE_BANYANDB_TARGETS | 127.0.0.1:17912 |
| maxBulkSize | The maximum size of write entities in a single batch write call. | SW_STORAGE_BANYANDB_MAX_BULK_SIZE | 10000 |
| flushInterval | Period of flush interval. In the timeunit of seconds. | SW_STORAGE_BANYANDB_FLUSH_INTERVAL | 15 |
| flushTimeout | The timeout seconds of a bulk flush. | SW_STORAGE_BANYANDB_FLUSH_TIMEOUT | 10 |
| concurrentWriteThreads | Concurrent consumer threads for batch writing. | SW_STORAGE_BANYANDB_CONCURRENT_WRITE_THREADS | 15 |
| profileTaskQueryMaxSize | Max size of ProfileTask to be fetched. | SW_STORAGE_BANYANDB_PROFILE_TASK_QUERY_MAX_SIZE | 200 |
| resultWindowMaxSize | The maximum size of dataset when the OAP loads cache, such as network aliases. | SW_STORAGE_BANYAND_QUERY_MAX_WINDOW_SIZE | 10000 |
| metadataQueryMaxSize | The maximum size of metadata per query. | SW_STORAGE_BANYAND_QUERY_MAX_SIZE | 10000 |
| segmentQueryMaxSize | The maximum size of trace segments per query. | SW_STORAGE_BANYAND_QUERY_SEGMENT_SIZE | 200 |
| asyncProfilerTaskQueryMaxSize | Max size of AsyncProfilerTask to be fetched. | SW_STORAGE_BANYANDB_ASYNC_PROFILER_TASK_QUERY_MAX_SIZE | 200 |
| profileDataQueryScrollBatchSize | The batch size of query profiling data. | SW_STORAGE_BANYAND_QUERY_PROFILE_DATA_BATCH_SIZE | 100 |
| user | The username for BanyanDB authentication. | SW_STORAGE_BANYANDB_USER | - |
| password | The password for BanyanDB authentication. | SW_STORAGE_BANYANDB_PASSWORD | - |
| sslTrustCAPath | If the BanyanDB server is configured with TLS, config the TLS cert file path and open tls connection. | SW_STORAGE_BANYANDB_SSL_TRUST_CA_PATH | - |
| cleanupUnusedTopNRules | Cleanup TopN rules in BanyanDB server that are not configured in the bydb-topn.yml config. | SW_STORAGE_BANYANDB_CLEANUP_UNUSED_TOPN_RULES | true |
The settings for each group: The hot stage is enabled by default for all groups. If the warm stage is enabled, the data will be moved to the warm stage after the TTL of the hot stage. If the cold stage is enabled and warm stage is disabled, the data will be moved to the cold stage after the TTL of the hot stage. If both warm and cold stages are enabled, the data will be moved to the warm stage after the TTL of the hot stage, and then to the cold stage after the TTL of the warm stage. OAP will query the data from the “hot and warm” stage by default if the “warm” stage is enabled.
| Group | Settings | Stage Settings | Value(s) and Explanation | System Environment Variable¹ | Default |
|---|---|---|---|---|---|
| records | - | - | The group for records not specified. Each normal dataset will be grouped under a single group named records. | - | - |
| - | shardNum | - | Shards Number for normal records group. | SW_STORAGE_BANYANDB_RECORDS_SHARD_NUM | 1 |
| - | segmentInterval | - | Segment Interval Days for normal records group. | SW_STORAGE_BANYANDB_RECORDS_SI_DAYS | 1 |
| - | ttl | - | TTL Days for normal records group. | SW_STORAGE_BANYANDB_RECORDS_TTL_DAYS | 3 |
| - | replicas | - | Replicas for normal records group. | SW_STORAGE_BANYANDB_RECORDS_REPLICAS | 0 |
| - | enableWarmStage | - | Activate warm stage for normal records group. | SW_STORAGE_BANYANDB_RECORDS_ENABLE_WARM_STAGE | false |
| - | enableColdStage | - | Activate cold stage for normal records group. | SW_STORAGE_BANYANDB_RECORDS_ENABLE_COLD_STAGE | false |
| - | warm | - | The warm stage settings. | - | - |
| - | - | shardNum | Shards Number for this stage. | SW_STORAGE_BANYANDB_RECORDS_WARM_SHARD_NUM | 1 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_RECORDS_WARM_SI_DAYS | 2 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_RECORDS_WARM_TTL_DAYS | 7 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_RECORDS_WARM_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_RECORDS_WARM_NODE_SELECTOR | type=warm |
| - | cold | - | The cold stage settings. | - | - |
| - | - | shardNum | Shards Number for for this stage. | SW_STORAGE_BANYANDB_RECORDS_COLD_SHARD_NUM | 1 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_RECORDS_COLD_SI_DAYS | 3 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_RECORDS_COLD_TTL_DAYS | 30 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_RECORDS_COLD_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_RECORDS_COLD_NODE_SELECTOR | type=cold |
| recordsTrace | - | - | - | - | |
| - | shardNum | - | Shards Number for SkyWalking trace records group. | SW_STORAGE_BANYANDB_TRACE_SHARD_NUM | 2 |
| - | segmentInterval | - | Segment Interval Days. | SW_STORAGE_BANYANDB_TRACE_SI_DAYS | 1 |
| - | ttl | - | TTL Days. | SW_STORAGE_BANYANDB_TRACE_TTL_DAYS | 3 |
| - | replicas | - | Replicas for SkyWalking trace records group. | SW_STORAGE_BANYANDB_TRACE_REPLICAS | 0 |
| - | enableWarmStage | - | Activate warm stage. | SW_STORAGE_BANYANDB_TRACE_ENABLE_WARM_STAGE | false |
| - | enableColdStage | - | Activate cold stage. | SW_STORAGE_BANYANDB_TRACE_ENABLE_COLD_STAGE | false |
| - | warm | - | The warm stage settings. | - | - |
| - | - | shardNum | Shards Number for this stage. | SW_STORAGE_BANYANDB_TRACE_WARM_SHARD_NUM | 2 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_TRACE_WARM_SI_DAYS | 1 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_TRACE_WARM_TTL_DAYS | 7 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_TRACE_WARM_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_TRACE_WARM_NODE_SELECTOR | type=warm |
| - | cold | - | The cold stage settings. | - | - |
| - | - | shardNum | Shards Number for for this stage. | SW_STORAGE_BANYANDB_TRACE_COLD_SHARD_NUM | 2 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_TRACE_COLD_SI_DAYS | 1 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_TRACE_COLD_TTL_DAYS | 30 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_TRACE_COLD_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_TRACE_COLD_NODE_SELECTOR | type=cold |
| recordsZipkinTrace | - | - | - | - | |
| - | shardNum | - | Shards Number for Zipkin trace records group. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_SHARD_NUM | 2 |
| - | segmentInterval | - | Segment Interval Days. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_SI_DAYS | 1 |
| - | ttl | - | TTL Days. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_TTL_DAYS | 3 |
| - | replicas | - | Replicas for Zipkin trace records group. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_REPLICAS | 0 |
| - | enableWarmStage | - | Activate warm stage. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_ENABLE_WARM_STAGE | false |
| - | enableColdStage | - | Activate cold stage. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_ENABLE_COLD_STAGE | false |
| - | warm | - | The warm stage settings. | - | - |
| - | - | shardNum | Shards Number for this stage. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_WARM_SHARD_NUM | 2 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_WARM_SI_DAYS | 1 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_WARM_TTL_DAYS | 7 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_WARM_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_WARM_NODE_SELECTOR | type=warm |
| - | cold | - | The cold stage settings. | - | - |
| - | - | shardNum | Shards Number for for this stage. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_COLD_SHARD_NUM | 2 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_COLD_SI_DAYS | 1 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_COLD_TTL_DAYS | 30 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_COLD_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_ZIPKIN_TRACE_COLD_NODE_SELECTOR | type=cold |
| recordsLog | - | - | - | - | |
| - | shardNum | - | Shards Number. | SW_STORAGE_BANYANDB_LOG_SHARD_NUM | 2 |
| - | segmentInterval | - | Segment Interval Days. | SW_STORAGE_BANYANDB_LOG_SI_DAYS | 1 |
| - | ttl | - | TTL Days. | SW_STORAGE_BANYANDB_LOG_TTL_DAYS | 3 |
| - | replicas | - | Replicas for Log records group. | SW_STORAGE_BANYANDB_LOG_REPLICAS | 0 |
| - | enableWarmStage | - | Activate warm stage. | SW_STORAGE_BANYANDB_LOG_ENABLE_WARM_STAGE | false |
| - | enableColdStage | - | Activate cold stage. | SW_STORAGE_BANYANDB_LOG_ENABLE_COLD_STAGE | false |
| - | warm | - | The warm stage settings. | - | - |
| - | - | shardNum | Shards Number for this stage. | SW_STORAGE_BANYANDB_LOG_WARM_SHARD_NUM | 2 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_LOG_WARM_SI_DAYS | 1 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_LOG_WARM_TTL_DAYS | 7 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_LOG_WARM_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_LOG_WARM_NODE_SELECTOR | type=warm |
| - | cold | - | The cold stage settings. | - | - |
| - | - | shardNum | Shards Number for for this stage. | SW_STORAGE_BANYANDB_LOG_COLD_SHARD_NUM | 2 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_LOG_COLD_SI_DAYS | 1 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_LOG_COLD_TTL_DAYS | 30 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_LOG_COLD_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_LOG_COLD_NODE_SELECTOR | type=cold |
| recordsBrowserErrorLog | - | - | - | - | |
| - | shardNum | - | Shards Number. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_SHARD_NUM | 2 |
| - | segmentInterval | - | Segment Interval Days. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_SI_DAYS | 1 |
| - | ttl | - | TTL Days. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_TTL_DAYS | 3 |
| - | replicas | - | Replicas for Browser Error Log records group. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_REPLICAS | 0 |
| - | enableWarmStage | - | Activate warm stage. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_ENABLE_WARM_STAGE | false |
| - | enableColdStage | - | Activate cold stage. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_ENABLE_COLD_STAGE | false |
| - | warm | - | The warm stage settings. | - | - |
| - | - | shardNum | Shards Number for this stage. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_WARM_SHARD_NUM | 2 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_WARM_SI_DAYS | 1 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_WARM_TTL_DAYS | 7 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_WARM_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_WARM_NODE_SELECTOR | type=warm |
| - | cold | - | The cold stage settings. | - | - |
| - | - | shardNum | Shards Number for for this stage. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_COLD_SHARD_NUM | 2 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_COLD_SI_DAYS | 1 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_COLD_TTL_DAYS | 30 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_COLD_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_BROWSER_ERROR_LOG_COLD_NODE_SELECTOR | type=cold |
| metricsMinute | - | - | The group for minute granularity metrics group. | - | - |
| - | shardNum | - | Shards Number for minute granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_MINUTE_SHARD_NUM | 2 |
| - | segmentInterval | - | Segment Interval Days for minute granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_MINUTE_SI_DAYS | 1 |
| - | ttl | - | TTL Days for minute granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_MINUTE_TTL_DAYS | 7 |
| - | replicas | - | Replicas for minute granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_MINUTE_REPLICAS | 0 |
| - | enableWarmStage | - | Activate warm stage for minute granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_MINUTE_ENABLE_WARM_STAGE | false |
| - | enableColdStage | - | Activate cold stage for minute granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_MINUTE_ENABLE_COLD_STAGE | false |
| - | warm | - | The warm stage settings. | - | - |
| - | - | shardNum | Shards Number for this stage. | SW_STORAGE_BANYANDB_METRICS_MINUTE_WARM_SHARD_NUM | 2 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_METRICS_MINUTE_WARM_SI_DAYS | 3 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_METRICS_MINUTE_WARM_TTL_DAYS | 15 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_METRICS_MINUTE_WARM_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_METRICS_MINUTE_WARM_NODE_SELECTOR | type=warm |
| - | cold | - | The cold stage settings. | - | - |
| - | - | shardNum | Shards Number for for this stage. | SW_STORAGE_BANYANDB_METRICS_MINUTE_COLD_SHARD_NUM | 2 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_METRICS_MINUTE_COLD_SI_DAYS | 5 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_METRICS_MINUTE_COLD_TTL_DAYS | 60 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_METRICS_MINUTE_COLD_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_METRICS_MINUTE_COLD_NODE_SELECTOR | type=cold |
| metricsHour | - | - | The group for hour granularity metrics. | - | - |
| - | shardNum | - | Shards Number for hour granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_HOUR_SHARD_NUM | 1 |
| - | segmentInterval | - | Segment Interval Days for hour granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_HOUR_SI_DAYS | 5 |
| - | ttl | - | TTL Days for hour granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_HOUR_TTL_DAYS | 15 |
| - | enableWarmStage | - | Activate warm stage for hour granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_HOUR_ENABLE_WARM_STAGE | false |
| - | enableColdStage | - | Activate cold stage for hour granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_HOUR_ENABLE_COLD_STAGE | false |
| - | warm | - | The warm stage settings. | - | - |
| - | - | shardNum | Shards Number for this stage. | SW_STORAGE_BANYANDB_METRICS_HOUR_WARM_SHARD_NUM | 1 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_METRICS_HOUR_WARM_SI_DAYS | 7 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_METRICS_HOUR_WARM_TTL_DAYS | 30 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_METRICS_HOUR_WARM_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_METRICS_HOUR_WARM_NODE_SELECTOR | type=warm |
| - | cold | - | The cold stage settings. | - | - |
| - | - | shardNum | Shards Number for for this stage. | SW_STORAGE_BANYANDB_METRICS_HOUR_COLD_SHARD_NUM | 1 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_METRICS_HOUR_COLD_SI_DAYS | 15 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_METRICS_HOUR_COLD_TTL_DAYS | 120 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_METRICS_HOUR_COLD_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_METRICS_HOUR_COLD_NODE_SELECTOR | type=cold |
| metricsDay | - | - | The group for day granularity metrics. | - | - |
| - | shardNum | - | Shards Number for day granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_DAY_SHARD_NUM | 1 |
| - | segmentInterval | - | Segment Interval Days for day granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_DAY_SI_DAYS | 15 |
| - | ttl | - | TTL Days for day granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_DAY_TTL_DAYS | 15 |
| - | replicas | - | Replicas for day granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_DAY_REPLICAS | 0 |
| - | enableWarmStage | - | Activate warm stage for day granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_DAY_ENABLE_WARM_STAGE | false |
| - | enableColdStage | - | Activate cold stage for day granularity metrics group. | SW_STORAGE_BANYANDB_METRICS_DAY_ENABLE_COLD_STAGE | false |
| - | warm | - | The warm stage settings. | - | - |
| - | - | shardNum | Shards Number for this stage. | SW_STORAGE_BANYANDB_METRICS_DAY_WARM_SHARD_NUM | 1 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_METRICS_DAY_WARM_SI_DAYS | 15 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_METRICS_DAY_WARM_TTL_DAYS | 30 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_METRICS_DAY_WARM_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_METRICS_DAY_WARM_NODE_SELECTOR | type=warm |
| - | cold | - | The cold stage settings. | - | - |
| - | - | shardNum | Shards Number for for this stage. | SW_STORAGE_BANYANDB_METRICS_DAY_COLD_SHARD_NUM | 1 |
| - | - | segmentInterval | Segment Interval Days for this stage. | SW_STORAGE_BANYANDB_METRICS_DAY_COLD_SI_DAYS | 15 |
| - | - | ttl | TTL Days for this stage. | SW_STORAGE_BANYANDB_METRICS_DAY_COLD_TTL_DAYS | 120 |
| - | - | replicas | Replicas for this stage. | SW_STORAGE_BANYANDB_METRICS_DAY_COLD_REPLICAS | 0 |
| - | - | nodeSelector | Specifying target nodes for this stage. | SW_STORAGE_BANYANDB_METRICS_DAY_COLD_NODE_SELECTOR | type=cold |
| metadata | - | - | The metadata group is designed to store metrics that are used for indexing without value columns. Such as service_traffic, network_address_alias, etc. Since BanyanDB 0.8.0. | - | - |
| - | shardNum | - | Shards Number for metadata index group. | SW_STORAGE_BANYANDB_METADATA_SHARD_NUM | 2 |
| - | segmentInterval | - | Segment Interval Days for metadata index group. | SW_STORAGE_BANYANDB_METADATA_SI_DAYS | 15 |
| - | ttl | - | TTL Days for metadata index group. | SW_STORAGE_BANYANDB_METADATA_TTL_DAYS | 15 |
| - | replicas | - | Replicas for metadata index group. | SW_STORAGE_BANYANDB_METADATA_REPLICAS | 0 |
| property | - | - | The group settings of property, such as UI and profiling. | - | - |
| - | shardNum | - | Shards Number for property group. | SW_STORAGE_BANYANDB_PROPERTY_SHARD_NUM | 1 |
| - | replicas | - | Replicas for property group. | SW_STORAGE_BANYANDB_PROPERTY_REPLICAS | 0 |
¹ System Environment Variable name could be declared and changed in application.yml/bydb.yaml. The names listed here are simply provided in the default application.yml/bydb.yaml file.