Application client access means to access your microservice to ShenYu gateway, currently supports HTTP, Dubbo, Spring Cloud, gRPC, Motan, Sofa, Tars and other protocols access.
Connecting the application client to ShenYu gateway is realized through the registration center, which involves the registration of the client and the synchronization of the server data. The registry supports HTTP, ZooKeeper, Etcd, Consul, and Nacos.
This article describes how to configure the application client to access the Apache ShenYu gateway. For related principles, see Application Client Access in the design document .
Set the register type to http in the yml file. The configuration information is as follows:
shenyu: register: registerType: http props: checked: true # is checked zombieCheckTimes: 5 # how many times does it fail to detect the service scheduledTime: 10 # timed detection interval time
The following shows the configuration information registered through Http when the Http service accesses the Apache ShenYu gateway as a client. Other clients (such as Dubbo and Spring Cloud) can be configured in the same way.
shenyu: client: registerType: http serverLists: http://localhost:9095 props: contextPath: /http appName: http port: 8188 isFull: false # registerType : register type, set http # serverList: when register type is http，set shenyu-admin address list，pls note 'http://' is necessary. # port: your project port number; apply to springmvc/tars/grpc # contextPath: your project's route prefix through shenyu gateway, such as /order ，/product etc，gateway will route based on it. # appName：your project name,the default value is`spring.application.name`. # isFull: set true means providing proxy for your entire service, or only a few controller. apply to springmvc/springcloud
First add the related dependencies to the pom file (already added by default) :
<dependency> <groupId>org.apache.shenyu</groupId> <artifactId>shenyu-register-server-zookeeper</artifactId> <version>${project.version}</version> </dependency>
yml file, set the register type to zookeeper and enter the service address and parameters of zookeeper. The configuration information is as follows:shenyu: register: registerType: zookeeper serverLists: localhost:2181 props: sessionTimeout: 5000 connectionTimeout: 2000
The following shows the configuration information registered by zookeeper when the Http service accesses the Apache ShenYu gateway as a client. Other clients (such as Dubbo and Spring Cloud) can be configured in the same way.
pom file:<!-- apache shenyu zookeeper register center --> <dependency> <groupId>org.apache.shenyu</groupId> <artifactId>shenyu-register-client-zookeeper</artifactId> <version>${shenyu.version}</version> </dependency>
zookeeper in yml and enter the service address and related parameters as follows:shenyu: client: registerType: zookeeper serverLists: localhost:2181 props: contextPath: /http appName: http port: 8189 isFull: false # registerType : register type, set zookeeper # serverList: when register type is zookeeper，set zookeeper address list # port: your project port number; apply to springmvc/tars/grpc # contextPath: your project's route prefix through shenyu gateway, such as /order ，/product etc，gateway will route based on it. # appName：your project name,the default value is`spring.application.name`. # isFull: set true means providing proxy for your entire service, or only a few controller. apply to springmvc/springcloud
First add the related dependencies to the pom file (already added by default) :
<dependency> <groupId>org.apache.shenyu</groupId> <artifactId>shenyu-register-server-etcd</artifactId> <version>${project.version}</version> </dependency>
etcd in yml and enter etcd service address and parameters. The configuration information is as follows:shenyu: register: registerType: etcd serverLists : http://localhost:2379
The following shows the configuration information registered by Etcd when the Http service accesses the Apache ShenYu gateway as a client. Other clients (such as Dubbo and Spring Cloud) can be configured in the same way.
pom file:<!-- apache shenyu etcd register center --> <dependency> <groupId>org.apache.shenyu</groupId> <artifactId>shenyu-register-client-etcd</artifactId> <version>${shenyu.version}</version> </dependency>
etcd in yml and enter the etcd service address and related parameters as follows:shenyu: client: registerType: etcd serverLists: http://localhost:2379 props: contextPath: /http appName: http port: 8189 isFull: false # registerType : register type, set etcd # serverList: when register type is etcd, add etcd address list # port: your project port number; apply to springmvc/tars/grpc # contextPath: your project's route prefix through shenyu gateway, such as /order ，/product etc，gateway will route based on it. # appName：your project name,the default value is`spring.application.name`. # isFull: set true means providing proxy for your entire service, or only a few controller. apply to springmvc/springcloud
First add the related dependencies to the pom file :
<!-- apache shenyu consul register start--> <dependency> <groupId>org.apache.shenyu</groupId> <artifactId>shenyu-register-server-consul</artifactId> <version>${project.version}</version> </dependency> <!--spring-cloud-starter-consul-discovery need add by yourself, suggest use 2.2.6.RELEASE version, other version maybe can't work--> <dependency> <groupId>org.springframework.cloud</groupId> <artifactId>spring-cloud-starter-consul-discovery</artifactId> <version>2.2.6.RELEASE</version> </dependency> <!-- apache shenyu consul register end-->
yml file to configure the registry as consul, you also need to configure spring.cloud.consul, the configuration information is as follows:shenyu: register: registerType: consul props: delay: 1 wait-time: 55 spring: cloud: consul: discovery: instance-id: shenyu-admin-1 service-name: shenyu-admin tags-as-metadata: false host: localhost port: 8500 # registerType : register type, set consul. # delay: The interval of each polling of monitoring metadata, in seconds, the default value is 1 second. # wait-time: The waiting time for each polling of metadata monitoring, in seconds, the default value is 55 second. # instance-id: Required, Consul needs to find specific services through instance-id. # service-name: The name where the service is registered to consul. If not configured, the value of `spring.application.name` will be taken by default. # host: Consul server host, the default value is localhost. # port: Consul server port, the default value is 8500. # tags-as-metadata: false, Required, This option must be set to false, otherwise the URI information will not be found, will cause to selector and upstream cache unable to update.
Note that the
consulregistry is currently incompatible with theSpring Cloudservice and will conflict with theEureka/Nacosregistry.
The following shows the configuration information registered by Consul when the Http service accesses the Apache ShenYu gateway as a client. Other clients (such as Dubbo and Spring Cloud) can be configured in the same way.
pom file:<!-- apache shenyu consul register center --> <dependency> <groupId>org.apache.shenyu</groupId> <artifactId>shenyu-register-client-consul</artifactId> <version>${shenyu.version}</version> </dependency> <dependency> <groupId>org.springframework.cloud</groupId> <artifactId>spring-cloud-starter-consul-discovery</artifactId> <version>2.2.6.RELEASE</version> </dependency>
consul in yml and config spring.cloud.consul, and related parameters as follows:shenyu: client: registerType: consul props: contextPath: /http appName: http port: 8188 isFull: false spring: cloud: consul: discovery: instance-id: shenyu-http-1 service-name: shenyu-http host: localhost port: 8500 # registerType : register type, set consul. # port: your project port number; apply to springmvc/tars/grpc # contextPath: your project's route prefix through shenyu gateway, such as /order ，/product etc，gateway will route based on it. # appName：your project name,the default value is`spring.application.name`. # isFull: set true means providing proxy for your entire service, or only a few controller. apply to springmvc # instance-id: Required, Consul needs to find specific services through instance-id. # service-name: The name where the service is registered to consul. If not configured, the value of `spring.application.name` will be taken by default. # host: Consul server host, the default value is localhost. # port: Consul server port, the default value is 8500.
First add the related dependencies to the pom file (already added by default) :
<dependency> <groupId>org.apache.shenyu</groupId> <artifactId>shenyu-register-server-nacos</artifactId> <version>${project.version}</version> </dependency>
yml file, configure the registry as nacos, fill in the related nacos service address and parameters, and nacos namespace (need to be consistent with shenyu-client), the configuration information is as follows:shenyu: register: registerType: nacos serverLists : localhost:8848 props: nacosNameSpace: ShenyuRegisterCenter
The following shows the configuration information registered by Nacos when the Http service accesses the Apache ShenYu gateway as a client. Other clients (such as Dubbo and Spring Cloud) can be configured in the same way.
pom file:<dependency> <groupId>org.apache.shenyu</groupId> <artifactId>shenyu-register-client-nacos</artifactId> <version>${shenyu.version}</version> </dependency>
yml configure registration mode as nacos, and fill in nacos service address and related parameters, also need nacos namespace (need to be consistent with shenyu-admin), IP (optional, then automatically obtain the local IP address) and port, configuration information is as follows:shenyu: client: registerType: nacos serverLists: localhost:8848 props: contextPath: /http appName: http port: 8188 isFull: false nacosNameSpace: ShenyuRegisterCenter # registerType : register type, set nacos # serverList: when register type is nacos, add nacos address list # port: your project port number; apply to springmvc/tars/grpc # contextPath: your project's route prefix through shenyu gateway, such as /order ，/product etc，gateway will route based on it. # appName：your project name,the default value is`spring.application.name`. # isFull: set true means providing proxy for your entire service, or only a few controller. apply to springmvc/springcloud # nacosNameSpace: nacos namespace
In conclusion, this paper mainly describes how to connect your microservices (currently supporting Http, Dubbo, Spring Cloud, gRPC, Motan, Sofa, Tars and other protocols) to the Apache ShenYu gateway. the Apache ShenYu gateway support registry has Http, Zookeeper, Etcd, Consul, Nacos and so on. This paper introduces the different ways to register configuration information when Http service is used as the client to access Apache ShenYu gateway.