#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

run:
  timeout: 10m
  skip-files:
    - "^zz_generated.*"
    - "_test.go"
linters:
  disable-all: true
  enable:
    # The base lints
    - errcheck
    - gosimple
    - govet
    - ineffassign
    - staticcheck
    - typecheck
    - unused
    - unused
    - bodyclose
    - cyclop
    - nilerr
    - goimports
    - asciicheck
    - prealloc
    - stylecheck
    - exportloopref
    - rowserrcheck
    - makezero
    - durationcheck
    - gosec
    - predeclared
    # Deprecated lints
    - structcheck
    - varcheck
    - deadcode

    # The advanced lints
    - dupl
    - exhaustive
    - godot
    - misspell
    #- varnamelen
    - gocritic
    #- exhaustruct
    #- nestif
    #- wsl
    #- gocognit
# Refers: https://gist.github.com/maratori/47a4d00457a92aa426dbd48a18776322
linters-settings:
  wsl:
    # See https://github.com/bombsimon/wsl/blob/master/doc/configuration.md for documentation of available settings.
    # These are the defaults for `golangci-lint`.

    # Do strict checking when assigning from append (x = append(x, y)). If
    # this is set to true - the append call must append either a variable
    # assigned, called or used on the line above.
    strict-append: true
    # Allows assignments to be cuddled with variables used in calls on
    # line above and calls to be cuddled with assignments of variables
    # used in call on line above.
    allow-assign-and-call: true
    # Allows assignments to be cuddled with anything.
    allow-assign-and-anything: false
    # Allows cuddling to assignments even if they span over multiple lines.
    allow-multiline-assign: true
    # If the number of lines in a case block is equal to or lager than this
    # number, the case *must* end white a newline.
    force-case-trailing-whitespace: 0
    # Allow blocks to end with comments.
    allow-trailing-comment: false
    # Allow multiple comments in the beginning of a block separated with newline.
    allow-separated-leading-comment: false
    # Allow multiple var/declaration statements to be cuddled.
    allow-cuddle-declarations: false
    # A list of call idents that everything can be cuddled with.
    # Defaults to calls looking like locks.
    allow-cuddle-with-calls: ["Lock", "RLock"]
    # AllowCuddleWithRHS is a list of right hand side variables that is allowed
    # to be cuddled with anything. Defaults to assignments or calls looking
    # like unlocks.
    allow-cuddle-with-rhs: ["Unlock", "RUnlock"]
    # Causes an error when an If statement that checks an error variable doesn't
    # cuddle with the assignment of that variable.
    force-err-cuddling: false
    # When force-err-cuddling is enabled this is a list of names
    # used for error variables to check for in the conditional.
    error-variable-names: ["err"]
    # Causes an error if a short declaration (:=) cuddles with anything other than
    # another short declaration.
    # This logic overrides force-err-cuddling among others.
    force-short-decl-cuddling: false
  varnamelen:
    # The longest distance, in source lines, that is being considered a "small scope".
    # Variables used in at most this many lines will be ignored.
    # Default: 5
    max-distance: 6
    # The minimum length of a variable's name that is considered "long".
    # Variable names that are at least this long will be ignored.
    # Default: 3
    min-name-length: 2
    # Check method receivers.
    # Default: false
    check-receiver: false
    # Check named return values.
    # Default: false
    check-return: true
    # Check type parameters.
    # Default: false
    check-type-param: true
    # Ignore "ok" variables that hold the bool return value of a type assertion.
    # Default: false
    ignore-type-assert-ok: true
    # Ignore "ok" variables that hold the bool return value of a map index.
    # Default: false
    ignore-map-index-ok: true
    # Ignore "ok" variables that hold the bool return value of a channel receive.
    # Default: false
    ignore-chan-recv-ok: true
    # Optional list of variable names that should be ignored completely.
    # Default: []
    ignore-names:
      - err
    # Optional list of variable declarations that should be ignored completely.
    # Entries must be in one of the following forms (see below for examples):
    # - for variables, parameters, named return values, method receivers, or type parameters:
    #   <name> <type>  (<type> can also be a pointer/slice/map/chan/...)
    # - for constants: const <name>
    #
    # Default: []
    ignore-decls:
      - c echo.Context
      - t testing.T
      - f *foo.Bar
      - e error
      - i int
      - const C
      - T any
      - m map[string]int
  prealloc:
    # IMPORTANT: we don't recommend using this linter before doing performance profiling.
    # For most programs usage of prealloc will be a premature optimization.

    # Report pre-allocation suggestions only on simple loops that have no returns/breaks/continues/gotos in them.
    # Default: true
    simple: false
    # Report pre-allocation suggestions on range loops.
    # Default: true
    range-loops: false
    # Report pre-allocation suggestions on for loops.
    # Default: false
    for-loops: true
    #nestif:
    # Minimal complexity of if statements to report.
    # Default: 5
  # min-complexity: 4
  misspell:
    # Correct spellings using locale preferences for US or UK.
    # Setting locale to US will correct the British spelling of 'colour' to 'color'.
    # Default is to use a neutral variety of English.
    locale: US
    # Default: []
    ignore-words:
      - someword
  godot:
    # Comments to be checked: `declarations`, `toplevel`, or `all`.
    # Default: declarations
    scope: toplevel
    # List of regexps for excluding particular comment lines from check.
    # Default: []
    exclude:
      # Exclude todo and fixme comments.
      - "^fixme:"
      - "^todo:"
    # Check that each sentence ends with a period.
    # Default: true
    period: false
    # Check that each sentence starts with a capital letter.
    # Default: false
    capital: false
  dupl:
    # Tokens count to trigger issue.
    # Default: 150
    threshold: 100
  cyclop:
    # The maximal code complexity to report.
    # Default: 10
    max-complexity: 30
    # The maximal average package complexity.
    # If it's higher than 0.0 (float) the check is enabled
    # Default: 0.0
    package-average: 10.0
  errcheck:
    # Report about not checking of errors in type assertions: `a := b.(MyStruct)`.
    # Such cases aren't reported by default.
    # Default: false
    check-type-assertions: true
  exhaustive:
    # Program elements to check for exhaustiveness.
    # Default: [ switch ]
    check:
      - switch
      - map
  funlen:
    # Checks the number of lines in a function.
    # If lower than 0, disable the check.
    # Default: 60
    lines: 100
    # Checks the number of statements in a function.
    # If lower than 0, disable the check.
    # Default: 40
    statements: 50
  gocognit:
    # Minimal code complexity to report.
    # Default: 30 (but we recommend 10-20)
    min-complexity: 20
  gocritic:
    # Which checks should be enabled; can't be combined with 'disabled-checks'.
    # See https://go-critic.github.io/overview#checks-overview.
    # To check which checks are enabled run `GL_DEBUG=gocritic golangci-lint run`.
    # By default, list of stable checks is used.
    enabled-checks:
      - elseif
      - nestingReduce
      - unnamedResult
      #  - ruleguard
      - truncateCmp
      - hugeparam
      - rangevalcopy
      - captlocal
      - underef
      - toomanyresultschecker
      - rangeexprcopy
    # Which checks should be disabled; can't be combined with 'enabled-checks'.
    # Default: []
    disabled-checks:
      - regexpMust
    # Enable multiple checks by tags, run `GL_DEBUG=gocritic golangci-lint run` to see all tags and checks.
    # See https://github.com/go-critic/go-critic#usage -> section "Tags".
    # Default: []
    enabled-tags:
      - diagnostic
      - style
      - performance
      - experimental
      - opinionated
    disabled-tags:
      - diagnostic
      - style
      - performance
      - experimental
      - opinionated
    # Settings passed to gocritic.
    # The settings key is the name of a supported gocritic checker.
    # The list of supported checkers can be find in https://go-critic.github.io/overview.
    settings:
      # Must be valid enabled check name.
      captLocal:
        # Whether to restrict checker to params only.
        # Default: true
        paramsOnly: false
      elseif:
        # Whether to skip balanced if-else pairs.
        # Default: true
        skipBalanced: false
      hugeParam:
        # Size in bytes that makes the warning trigger.
        # Default: 80
        sizeThreshold: 70
      nestingReduce:
        # Min number of statements inside a branch to trigger a warning.
        # Default: 5
        bodyWidth: 4
      rangeExprCopy:
        # Size in bytes that makes the warning trigger.
        # Default: 512
        sizeThreshold: 516
        # Whether to check test functions
        # Default: true
        skipTestFuncs: false
      rangeValCopy:
        # Size in bytes that makes the warning trigger.
        # Default: 128
        sizeThreshold: 32
        # Whether to check test functions.
        # Default: true
        skipTestFuncs: false
      ruleguard:
        # Enable debug to identify which 'Where' condition was rejected.
        # The value of the parameter is the name of a function in a ruleguard file.
        #
        # When a rule is evaluated:
        # If:
        #   The Match() clause is accepted; and
        #   One of the conditions in the Where() clause is rejected,
        # Then:
        #   ruleguard prints the specific Where() condition that was rejected.
        #
        # The flag is passed to the ruleguard 'debug-group' argument.
        # Default: ""
        debug: 'emptyDecl'
        # Deprecated, use 'failOn' param.
        # If set to true, identical to failOn='all', otherwise failOn=''
        failOnError: false
        # Determines the behavior when an error occurs while parsing ruleguard files.
        # If flag is not set, log error and skip rule files that contain an error.
        # If flag is set, the value must be a comma-separated list of error conditions.
        # - 'all':    fail on all errors.
        # - 'import': ruleguard rule imports a package that cannot be found.
        # - 'dsl':    gorule file does not comply with the ruleguard DSL.
        # Default: ""
        failOn: dsl
        # Comma-separated list of file paths containing ruleguard rules.
        # If a path is relative, it is relative to the directory where the golangci-lint command is executed.
        # The special '${configDir}' variable is substituted with the absolute directory containing the golangci config file.
        # Glob patterns such as 'rules-*.go' may be specified.
        # Default: ""
        rules: '${configDir}/ruleguard/rules-*.go,${configDir}/myrule1.go'
        # Comma-separated list of enabled groups or skip empty to enable everything.
        # Tags can be defined with # character prefix.
        # Default: "<all>"
        enable: "myGroupName,#myTagName"
        # Comma-separated list of disabled groups or skip empty to enable everything.
        # Tags can be defined with # character prefix.
        # Default: ""
        disable: "myGroupName,#myTagName"
      tooManyResultsChecker:
        # Maximum number of results.
        # Default: 5
        maxResults: 10
      truncateCmp:
        # Whether to skip int/uint/uintptr types.
        # Default: true
        skipArchDependent: false
      underef:
        # Whether to skip (*x).method() calls where x is a pointer receiver.
        # Default: true
        skipRecvDeref: false
      unnamedResult:
        # Whether to check exported functions.
        # Default: false
        checkExported: true
issues:
  exclude-rules:
    - path: _test\.go
      linters:
        - errcheck
        - gosec
        - rowserrcheck
        - makezero