examples/cxf/cxf-ws-addressing/README.txt - servicemix-features - Git at Google

 /*
  * Licensed to the Apache Software Foundation (ASF) under one or more
  * contributor license agreements.  See the NOTICE file distributed with
  * this work for additional information regarding copyright ownership.
  * The ASF licenses this file to You under the Apache License, Version 2.0
  * (the "License"); you may not use this file except in compliance with
  * the License.  You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 CXF WS-Addressing Example
 =========================

 Purpose
 -------
 Use CXF to create a web service enabled for WS-Addressing and
 expose it through the OSGi HTTP Service.


 Explanation
 -----------
 This example is based on the WS-Addressing sample in Apache CXF
 (http://cxf.apache.org/). There is a more complete explanation
 of WS-Addressing in that sample's README.

 The WS-Addressing functionality is implemented as interceptors.
 It is configured in the beans.xml file, which is located in the
 src/main/resources/META-INF/spring directory of this example.
 The configuration can be explained as follows:

 1. The following entry adds the addressing interceptors (org.apache.
    cxf.ws.addressing.MAPAggregator and org.apache.cxf.ws.addressing.
    soap.MAPCodec) to the inbound and outbound interceptor chains.
    The interceptors add the appropriate WS-Addressing headers to the
    SOAP messages and remove them at the service end.

   <bean id="mapAggregator" class="org.apache.cxf.ws.addressing.MAPAggregator"/>
   <bean id="mapCodec" class="org.apache.cxf.ws.addressing.soap.MAPCodec"/>

     <!--bean id="cxf" class="org.apache.cxf.bus.CXFBusImpl">
         <property name="inInterceptors">
             <list>
                 <ref bean="mapAggregator"/>
                 <ref bean="mapCodec"/>
             </list>
         </property>
         <property name="inFaultInterceptors">
             <list>
                 <ref bean="mapAggregator"/>
                 <ref bean="mapCodec"/>
                 <ref bean="logInbound"/>
             </list>
         </property>
         <property name="outInterceptors">
             <list>
                 <ref bean="mapAggregator"/>
                 <ref bean="mapCodec"/>
             </list>
         </property>
         <property name="outFaultInterceptors">
             <list>
                 <ref bean="mapAggregator"/>
                 <ref bean="mapCodec"/>
             </list>
         </property>
     </bean-->

 2. The following entry enables WS-Addressing for all services
    on the bus:

    <cxf:bus>
        <cxf:features>
            <wsa:addressing/>
        </cxf:features>
    </cxf:bus>

 In addition, the service WSDL, hello_world_addr.wsdl, includes
 WS-Addressing configuration as shown below:

     <wsdl:service ... >
         <wsdl:port ...>
             <soap:address ... />
             <wswa:UsingAddressing xmlns:wswa="http://www.w3.org/2005/02/addressing/wsdl"/>
         </wsdl:port>
     </wsdl:service>

 The WSDL file is located in the src/main/resources/wsdl
 directory of this example.

 The various clients send the request.xml file, located in src/main/
 resources/org/apache/servicemix/examples/cxf/wsaddressing. It
 contains SOAP request with some WS-Addressing headers set in it.


 Prerequisites for Running the Example
 -------------------------------------
 1. You must have the following installed on your machine:

    - JDK 1.6 or higher

    - Maven 2.2.1 or higher

   For more information, see the README in the top-level examples
   directory.


 2. Start ServiceMix by running the following command:

   <servicemix_home>/bin/servicemix          (on UNIX)
   <servicemix_home>\bin\servicemix          (on Windows)


 Running the Example
 -------------------
 You can run the example in two ways:

 - A. Using a Prebuilt Deployment Bundle: Quick and Easy
 This option is useful if you want to see the example up and
 running as quickly as possible.

 - B. Building the Example Bundle Yourself
 This option is useful if you want to change the example in any
 way. It tells you how to build and deploy the example. This
 option might be slower than option A because, if you do not
 already have the required bundles in your local Maven
 repository, Maven will have to download the bundles it needs.

 A. Using a Prebuilt Deployment Bundle: Quick and Easy
 -----------------------------------------------------
 To install and run a prebuilt version of this example, enter
 the following command in the ServiceMix console:

   features:install examples-cxf-ws-addressing

 This command makes use of the ServiceMix features facility. For
 more information about the features facility, see the README.txt
 file in the examples parent directory.

 To view the service WSDL, open your browser and go to the following
 URL:

   http://localhost:8181/cxf/SoapContext/SoapPort?wsdl

 Note, if you use Safari, right click the window and select
 'Show Source'.

 Running a Client
 ----------------
 To run the web client:

 1. Open the client.html, which is located in the same directory as
    this README file, in your favorite browser.

 2. Click the Send button to send a request.

    Once the request has been successfully sent, you should receive
    a SOAP message similar to the following as a response. It should
    appear in the right-hand panel of the web page:

    STATUS: 200
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
      <soap:Header>
        <Action xmlns="http://www.w3.org/2005/08/addressing">
        http://apache.org/hello_world_soap_http/Greeter/sayHiResponse
        </Action>
        <MessageID xmlns="http://www.w3.org/2005/08/addressing">
        urn:uuid:4352861b-3451-4ae8-b97f-11f7e2535807</MessageID>
        <To xmlns="http://www.w3.org/2005/08/addressing">
        http://www.w3.org/2005/08/addressing/anonymous</To>
        <RelatesTo xmlns="http://www.w3.org/2005/08/addressing">
        urn:uuid:10fb2ee6-43db-4d88-a3e5-6316f1763669</RelatesTo>
      </soap:Header>
      <soap:Body>
        <sayHiResponse xmlns="http://apache.org/hello_world_soap_http/types">
        <responseType>Bonjour</responseType>
        </sayHiResponse>
      </soap:Body>
    </soap:Envelope>


 To run the java code client:

 1. Change to the <servicemix_home>/examples/cxf/cxf-ws-addressing
    directory.

 2. Run the following command:

      mvn compile exec:java

    It makes an invocation with WS-Addressing headers and displays,
    in the ServiceMix console, a response similar to that shown
    in the web client (see above).

 Changing /cxf servlet alias
 ---------------------------
 By default CXF Servlet is assigned a '/cxf' alias. You can
 change it in a couple of ways:

 a. Add org.apache.cxf.osgi.cfg to the /etc directory and
    set the 'org.apache.cxf.servlet.context' property, for example:

      org.apache.cxf.servlet.context=/custom

 b. Use shell config commands, for example:

      config:edit org.apache.cxf.osgi
      config:propset org.apache.cxf.servlet.context /super
      config:update


 B. Building the Example Bundle Yourself
 ---------------------------------------
 To install and run the example where you build the example bundle
 yourself, complete the following steps:

 1. If you have already run the example using the prebuilt version as
    described above, you must first uninstall the
    examples-cxf-ws-addressing feature by entering the following
    command in the ServiceMix console:

      features:uninstall examples-cxf-ws-addressing


 2. Build the example by opening a command prompt, changing directory
    to examples/cxf-ws-addressing (this example) and entering the
    following Maven command:

      mvn install

    If all of the required OSGi bundles are available in your local
    Maven repository, the example will build very quickly. Otherwise
    it may take some time for Maven to download everything it needs.

    The mvn install command builds the example deployment bundle and
    copies it to your local Maven repository and to the target directory
    of this example.

 3. Install the example by entering the following command in
    the ServiceMix console:

      features:install examples-cxf-ws-addressing

    It makes use of the ServiceMix features facility. For more
    information about the features facility, see the README.txt file
    in the examples parent directory.

 To view the service WSDL, open your browser and go to the following
 URL:

     http://localhost:8181/cxf/SoapContext/SoapPort?wsdl

 Note, if you use Safari, right click the window and select
 'Show Source'.

 You can try running a client against your service by following the
 instructions in the "Running a Client" section above.


 Stopping and Uninstalling the Example
 -------------------------------------
 To stop the example, you must first know the bundle ID that ServiceMix
 has assigned to it. To get the bundle ID, enter the following command
 in the ServiceMix console (Note, the text you are typing will
 intermingle with the output being logged. This is nothing to worry
 about.):

   osgi:list

 At the end of the listing, you should see an entry similar to the
 following:

   [171] [Active     ] [Started] [  60] Apache ServiceMix Example :: CXF WS-ADDRESSING OSGI (4.2.0)

 In this case, the bundle ID is 171.

 To stop the example, enter the following command in the ServiceMix
 console:

   osgi:stop <bundle_id>

 For example:

   osgi:stop 171

 To uninstall the example, enter one of the following commands in
 the ServiceMix console:

   features:uninstall examples-cxf-ws-addressing

 or

   osgi:uninstall <bundle_id>


 Viewing the Log Entries
 -----------------------
 You can view the entries in the log file in the data/log
 directory of your ServiceMix installation, or by typing
 the following command in the ServiceMix console:

   log:display
	/*
	* Licensed to the Apache Software Foundation (ASF) under one or more
	* contributor license agreements. See the NOTICE file distributed with
	* this work for additional information regarding copyright ownership.
	* The ASF licenses this file to You under the Apache License, Version 2.0
	* (the "License"); you may not use this file except in compliance with
	* the License. You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	CXF WS-Addressing Example
	=========================

	Purpose
	-------
	Use CXF to create a web service enabled for WS-Addressing and
	expose it through the OSGi HTTP Service.


	Explanation
	-----------
	This example is based on the WS-Addressing sample in Apache CXF
	(http://cxf.apache.org/). There is a more complete explanation
	of WS-Addressing in that sample's README.

	The WS-Addressing functionality is implemented as interceptors.
	It is configured in the beans.xml file, which is located in the
	src/main/resources/META-INF/spring directory of this example.
	The configuration can be explained as follows:

	1. The following entry adds the addressing interceptors (org.apache.
	cxf.ws.addressing.MAPAggregator and org.apache.cxf.ws.addressing.
	soap.MAPCodec) to the inbound and outbound interceptor chains.
	The interceptors add the appropriate WS-Addressing headers to the
	SOAP messages and remove them at the service end.

	<bean id="mapAggregator" class="org.apache.cxf.ws.addressing.MAPAggregator"/>
	<bean id="mapCodec" class="org.apache.cxf.ws.addressing.soap.MAPCodec"/>

	<!--bean id="cxf" class="org.apache.cxf.bus.CXFBusImpl">
	<property name="inInterceptors">
	<list>
	<ref bean="mapAggregator"/>
	<ref bean="mapCodec"/>
	</list>
	</property>
	<property name="inFaultInterceptors">
	<list>
	<ref bean="mapAggregator"/>
	<ref bean="mapCodec"/>
	<ref bean="logInbound"/>
	</list>
	</property>
	<property name="outInterceptors">
	<list>
	<ref bean="mapAggregator"/>
	<ref bean="mapCodec"/>
	</list>
	</property>
	<property name="outFaultInterceptors">
	<list>
	<ref bean="mapAggregator"/>
	<ref bean="mapCodec"/>
	</list>
	</property>
	</bean-->

	2. The following entry enables WS-Addressing for all services
	on the bus:

	<cxf:bus>
	<cxf:features>
	<wsa:addressing/>
	</cxf:features>
	</cxf:bus>

	In addition, the service WSDL, hello_world_addr.wsdl, includes
	WS-Addressing configuration as shown below:

	<wsdl:service ... >
	<wsdl:port ...>
	<soap:address ... />
	<wswa:UsingAddressing xmlns:wswa="http://www.w3.org/2005/02/addressing/wsdl"/>
	</wsdl:port>
	</wsdl:service>

	The WSDL file is located in the src/main/resources/wsdl
	directory of this example.

	The various clients send the request.xml file, located in src/main/
	resources/org/apache/servicemix/examples/cxf/wsaddressing. It
	contains SOAP request with some WS-Addressing headers set in it.


	Prerequisites for Running the Example
	-------------------------------------
	1. You must have the following installed on your machine:

	- JDK 1.6 or higher

	- Maven 2.2.1 or higher

	For more information, see the README in the top-level examples
	directory.


	2. Start ServiceMix by running the following command:

	<servicemix_home>/bin/servicemix (on UNIX)
	<servicemix_home>\bin\servicemix (on Windows)


	Running the Example
	-------------------
	You can run the example in two ways:

	- A. Using a Prebuilt Deployment Bundle: Quick and Easy
	This option is useful if you want to see the example up and
	running as quickly as possible.

	- B. Building the Example Bundle Yourself
	This option is useful if you want to change the example in any
	way. It tells you how to build and deploy the example. This
	option might be slower than option A because, if you do not
	already have the required bundles in your local Maven
	repository, Maven will have to download the bundles it needs.

	A. Using a Prebuilt Deployment Bundle: Quick and Easy
	-----------------------------------------------------
	To install and run a prebuilt version of this example, enter
	the following command in the ServiceMix console:

	features:install examples-cxf-ws-addressing

	This command makes use of the ServiceMix features facility. For
	more information about the features facility, see the README.txt
	file in the examples parent directory.

	To view the service WSDL, open your browser and go to the following
	URL:

	http://localhost:8181/cxf/SoapContext/SoapPort?wsdl

	Note, if you use Safari, right click the window and select
	'Show Source'.

	Running a Client
	----------------
	To run the web client:

	1. Open the client.html, which is located in the same directory as
	this README file, in your favorite browser.

	2. Click the Send button to send a request.

	Once the request has been successfully sent, you should receive
	a SOAP message similar to the following as a response. It should
	appear in the right-hand panel of the web page:

	STATUS: 200
	<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
	<soap:Header>
	<Action xmlns="http://www.w3.org/2005/08/addressing">
	http://apache.org/hello_world_soap_http/Greeter/sayHiResponse
	</Action>
	<MessageID xmlns="http://www.w3.org/2005/08/addressing">
	urn:uuid:4352861b-3451-4ae8-b97f-11f7e2535807</MessageID>
	<To xmlns="http://www.w3.org/2005/08/addressing">
	http://www.w3.org/2005/08/addressing/anonymous</To>
	<RelatesTo xmlns="http://www.w3.org/2005/08/addressing">
	urn:uuid:10fb2ee6-43db-4d88-a3e5-6316f1763669</RelatesTo>
	</soap:Header>
	<soap:Body>
	<sayHiResponse xmlns="http://apache.org/hello_world_soap_http/types">
	<responseType>Bonjour</responseType>
	</sayHiResponse>
	</soap:Body>
	</soap:Envelope>


	To run the java code client:

	1. Change to the <servicemix_home>/examples/cxf/cxf-ws-addressing
	directory.

	2. Run the following command:

	mvn compile exec:java

	It makes an invocation with WS-Addressing headers and displays,
	in the ServiceMix console, a response similar to that shown
	in the web client (see above).

	Changing /cxf servlet alias
	---------------------------
	By default CXF Servlet is assigned a '/cxf' alias. You can
	change it in a couple of ways:

	a. Add org.apache.cxf.osgi.cfg to the /etc directory and
	set the 'org.apache.cxf.servlet.context' property, for example:

	org.apache.cxf.servlet.context=/custom

	b. Use shell config commands, for example:

	config:edit org.apache.cxf.osgi
	config:propset org.apache.cxf.servlet.context /super
	config:update


	B. Building the Example Bundle Yourself
	---------------------------------------
	To install and run the example where you build the example bundle
	yourself, complete the following steps:

	1. If you have already run the example using the prebuilt version as
	described above, you must first uninstall the
	examples-cxf-ws-addressing feature by entering the following
	command in the ServiceMix console:

	features:uninstall examples-cxf-ws-addressing


	2. Build the example by opening a command prompt, changing directory
	to examples/cxf-ws-addressing (this example) and entering the
	following Maven command:

	mvn install

	If all of the required OSGi bundles are available in your local
	Maven repository, the example will build very quickly. Otherwise
	it may take some time for Maven to download everything it needs.

	The mvn install command builds the example deployment bundle and
	copies it to your local Maven repository and to the target directory
	of this example.

	3. Install the example by entering the following command in
	the ServiceMix console:

	features:install examples-cxf-ws-addressing

	It makes use of the ServiceMix features facility. For more
	information about the features facility, see the README.txt file
	in the examples parent directory.

	To view the service WSDL, open your browser and go to the following
	URL:

	http://localhost:8181/cxf/SoapContext/SoapPort?wsdl

	Note, if you use Safari, right click the window and select
	'Show Source'.

	You can try running a client against your service by following the
	instructions in the "Running a Client" section above.


	Stopping and Uninstalling the Example
	-------------------------------------
	To stop the example, you must first know the bundle ID that ServiceMix
	has assigned to it. To get the bundle ID, enter the following command
	in the ServiceMix console (Note, the text you are typing will
	intermingle with the output being logged. This is nothing to worry
	about.):

	osgi:list

	At the end of the listing, you should see an entry similar to the
	following:

	[171] [Active ] [Started] [ 60] Apache ServiceMix Example :: CXF WS-ADDRESSING OSGI (4.2.0)

	In this case, the bundle ID is 171.

	To stop the example, enter the following command in the ServiceMix
	console:

	osgi:stop <bundle_id>

	For example:

	osgi:stop 171

	To uninstall the example, enter one of the following commands in
	the ServiceMix console:

	features:uninstall examples-cxf-ws-addressing

	or

	osgi:uninstall <bundle_id>


	Viewing the Log Entries
	-----------------------
	You can view the entries in the log file in the data/log
	directory of your ServiceMix installation, or by typing
	the following command in the ServiceMix console:

	log:display