Google Git
Sign in
apache / rya / refs/tags/rel/rya-incubating-3.2.10 / . / extras / vagrantExample / src / main / vagrant
tree: 0328844e1e49bae5c5597ba54079d2393a55fa8f [path history] [tgz]
  1. readme.md
  2. Vagrantfile
extras/vagrantExample/src/main/vagrant/readme.md

Rya Vagrant Example Documentation

The Rya Vagrant Example project allows users to quickly get up and running on Rya using a Virtual Machine. Specifically, this project uses Vagrant to create a VM, install Rya on Accumulo, and configure the OpenRDF Workbench Web Application to use Rya.

Setting up the VM

Installing Vagrant

The Rya Example Box VM requires Vagrant to install, configure, and run the VM. Vagrant is freely available for many host operating systems. More information about Vagrant (including installers) are available at https://www.vagrantup.com/

The Rya Example Box was developed using Vagrant 1.7.4 and Oracle Virtual Box 5.0.6.

If a user would rather not use Vagrant, expert users should be able to read through the Rya-Example-Box Vagrantfile and understand the operations that the Vagrantfile is performing to configure the VM for Rya. These operations should be applicable to other Linux machines and VMs.

Starting up the VM

Once Vagrant is installed, starting up the Rya-Example-Box is fairly straightforward.

  1. Create a custom directory for the Rya Example Box (e.g., for windows users c:\users\<user>\ryavagrant or for Mac/Linux users /home/<user>/ryavagrant)

  2. Download the Rya-Example-Box Vagrantfile to the custom directory. Note that it must be named Vagrantfile with no extension.

  3. Open a DOS prompt (Windows) or Terminal (Mac/Linux), change to the custom directory, and issue the command vagrant up. Note that it may take up to 30 minutes to download, install, and configure Rya and all of the components.

Verification

By default, the VM should be assigned the IP address of 192.168.33.10. This value is defined in the Vagrantfile and it is configurable. All of the procedures in this in this document assume that the hostname rya-example-box resolves to the VM’s IP address 192.168.33.10. The easiest way to do this is to add the entry 192.168.33.10 rya-example-box to your machine’s host file (e.g., for windows users modify C:\Windows\System32\drivers\etc\hosts or for Mac/Linux users modify /etc/hosts)

  1. Verify the Tomcat instance: Open a browser to http://rya-example-box:8080/. You should see a webpage that says “It works! If you‘re seeing this page via a web browser, it means you’ve setup Tomcat successfully. Congratulations!

  2. Verify the deployed OpenRDF Sesame service: Open your browser to http://rya-example-box:8080/openrdf-sesame/protocol and you should see a 6 (this is the OpenRDF Protocol Version).

  3. Verify the deployed OpenRDF Workbench: Open your browser to http://rya-example-box:8080/openrdf-workbench

  4. Verify the deployed Rya Web: Open your browser to http://rya-example-box:8080/web.rya/sparqlQuery.jsp

  5. Ssh into into the VM: SSH from your host machine to rya-example-box with user/pass of vagrant/vagrant.

  6. Test the Accumulo shell: After ssh'ing into the VM, run the command: /home/vagrant/accumulo-1.6.5/bin/accumulo shell -u root -p root

Common Errors on the VM

Most of the time, the Vagrant script works perfectly and passes all of the verification. However, below are a list of the common issues that we've seen and how to mitigate those issues

URLs for dependencies no longer valid

As dependencies such as Hadoop and Accumulo are updated, URLs for downloads of old versions can be come stale. If this happens, the vagrant provisioning script should fail. Scrolling back through the output should reveal an error message indicating which download did not work. To fix, try updating the version number specified in the Vagrantfile.

Rya libraries are not installed

Run these two commands and see if you have any Rya files in the two lib directories:

    ls /var/lib/tomcat7/webapps/openrdf-sesame/WEB-INF/lib/rya*
    ls /var/lib/tomcat7/webapps/openrdf-workbench/WEB-INF/lib/rya*

If these files do note exists, open the vagrant file and look for the line echo "Downloading Rya". Try working through those commands manually on your Vagrant VM.

OpenRDF Workbench transformations are not installed

OpenRDF Workbench requires a set of “transformations” for listing Rya in the OpenRDF Workbench Repository list. The transforms are in this directory: /var/lib/tomcat7/webapps/openrdf-workbench/transformations/

  1. Verify that this file exists: create-RyaAccumuloSail.xsl
  2. Verify that create.xsl has been updated for rya. (run: “cat create.xsl | grep Rya” and make sure there's some stuff there.)

If these files do note exists, open the vagrant file and look for the line echo "Downloading Rya". Try working through those commands manually on your Vagrant VM.

Other useful commands

Below is a list of other useful commands on the VMs

#####Log into the VM

  1. Go to the folder containing “vagrantfile”, run: cd extras/vagrantExample/src/main/vagrant/
  2. Login -- no password required, uses crypto keys, run: vagrant ssh Alternatively:
  3. Log into the vm (run: ssh vagrant@rya-example-box with pass: vagrant)

#####Running as Root

Most start and stop scripts require running as root with variables, like %HADOOP_PREFIX% assigned.

  1. Run thecommand as root preserving environment variables, run: sudo -E thecommand theParameters The -E preserves environment variables from the current session.

Alternatively:

  1. Switch to root (run: su with pass: vagrant)
  2. Load the environment variables. (run: source .accumulo_rc.sh)
  3. Enter thecommand with parameters after the “#” prompt.
  4. Exit when done (run: exit )

#####Restart Tomcat

  1. Login into the VM, see above.
  2. Restart tomcat, run: sudo -E service tomcat7 restart

#####Restart Accumulo

  1. Login into the VM, see above.
  2. Stop Accumulo (run: sudo -E /home/vagrant/accumulo-1.6.5/bin/stop-all.sh)
  • If stop-all doesn't complete, hit ctrl-c once and you should see Initiating forced shutdown in 15 seconds. Wait 15 seconds.
  1. Start Accumulo (run: sudo -E /home/vagrant/accumulo-1.6.5/bin/start-all.sh)

#####Test and Restart Zookeeper

  1. Log into the vm, see above.
  2. Ping Zookeeper, run: echo ruok | (nc 127.0.0.1 2181 ; echo)
  • If Zookeeper is okay, you should immediately see the response imok
  • Otherwise, restart Zookeeper, run: sudo -E /home/vagrant/zookeeper-3.4.5-cdh4.5.0/bin/zkServer.sh start
Rya Process list

List the processes specific to rya.

From the VM, run: ryaps Output should look like this:

org.apache.zookeeper.server.quorum.QuorumPeerMain
org.apache.accumulo.start.Main monitor
org.apache.accumulo.start.Main tserver
org.apache.accumulo.start.Main master
org.apache.accumulo.start.Main gc
org.apache.accumulo.start.Main tracer
org.apache.catalina.startup.Bootstrap
Re-provision, reseting the configuration

If you are having issues, or modified the vagrantfile and want to put everything back as specified, then use the provision command. This will overwrite most settings. It will not download nor unpack the libraries, unless you first remove there corresponding folders from the VM's vagrant home folder.

  1. Go to the folder containing “vagrantfile”, on the host machine, (not the VM), run: cd extras/vagrantExample/src/main/vagrant/
  2. Run the provision command: vagrant provision To get the full factory-reset, do some of the following before you re-provision:
Logs

From within the VM, run: sudo rm -r zookeeper-3.4.5-cdh4.5.0/logs sudo rm -r accumulo-1.6.5/logs/

Delete all data in Rya and Accumulo!

If you run into the issue where it repeatedly prints: Waiting for accumulo to be initialized This will allow Accumulo to start up. Remove the data, then reprovision as above. From within the VM, run: sudo rm -r /data sudo rm -r /var/zookeeper/

Interacting with Rya on the VM

Connecting to Rya via OpenRDF Workbench

The first step to using Rya via the OpenRDF Workbench is to create a repository using the Rya Accumulo Store connector.

  1. Open your browser to the OpenRDF Workbench
  2. Click on New Repository
  3. Choose “Type” of Rya Accumulo Store, a Repository “ID” (e.g., RyaAccumulo), and a Repository “Title” (e.g., Rya Accumulo). Click on Next when complete.
  4. Enter the Rya Accumulo Store connection parameters. The default parameters will connect to the Rya Example Box Acccumulo deployment (i.e., Accumulo User: root, Accumulo Password: root, Accumulo Instance: dev, Zookeepers: localhost, is Mock?: false). Click on Create when complete.

Uploading Data via OpenRDF Workbench

Once we've created a Rya repository, we can load data into Rya via the OpenRDF Workbench.

  1. Open your browser to the OpenRDF Workbench
  2. Verify that OpenRDF Workbench is connected to Rya. The OpenRDF Workbench screen should have Current Selections: Repository: Rya Accumulo ( RyaAccumulo ) at the top of the page.
  3. Click on Add on the left side of the page.
  4. This page allows a user to add data either through a local file (uploaded through the browser), cut-and-pasted RDF, or a file located on the web. For this example, let's choose a file on the web. Set “Data Format” to RDF/XML and “Location of the RDF data you wish to upload” to http://telegraphis.net/data/currencies/currencies.rdf. All other fields should remain empty. Click on Upload when complete.

Querying Data via OpenRDF Workbench

Once we've created a Rya repository and uploaded data, we can query Rya via the OpenRDF Workbench.

  1. Open your browser to the OpenRDF Workbench

  2. Verify that OpenRDF Workbench is connected to Rya. The OpenRDF Workbench screen should have Current Selections: Repository: Rya Accumulo ( RyaAccumulo ) at the top of the page.

  3. Click on Query on the left side of the page.

  4. Use the example SPARQL query below to query for Currencies with a Short Name of “dollar”

    PREFIX money:<http://telegraphis.net/ontology/money/money#>

select ?name where {
   ?x a money:Currency .
   ?x money:shortName "dollar" .
   ?x money:name ?name .
}

Using the OpenRDF REST Service

More information about the Sesame REST HTTP Protocol is availible in the [OpenRDF 2.7 Docs] (http://rdf4j.org/sesame/2.7/docs/system.docbook?view#The_Sesame_REST_HTTP_Protocol)

Using Rya Java Client

TODO

Using Rya Web Client

The Rya Web Client provides a user a web gui to query Rya. Once data has been loaded into Rya, we can run the same query as before

  1. Open your browser to the Rya Web page.

  2. Use the example SPARQL query below to query for Currencies with a Short Name of “dollar”

    PREFIX money:<http://telegraphis.net/ontology/money/money#>

select ?name where {
   ?x a money:Currency .
   ?x money:shortName "dollar" .
   ?x money:name ?name .
}

  3. You should see an XML document with the results.

Developing Rya on the VM

TODO

Enabling Secondary Indexing

TODO

Resizing the VMs Disk space

Instructions for resizing a Vagrant/VirtualBox image can be found [here] (http://www.midwesternmac.com/blogs/jeff-geerling/resizing-virtualbox-disk-image)