# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#
# This file provides a list of the deployment variables for the Ranger KMS Web Application 
#

#------------------------- DB CONFIG - BEGIN ----------------------------------
# Uncomment the below if the DBA steps need to be run separately
#setup_mode=SeparateDBA

PYTHON_COMMAND_INVOKER=python

#DB_FLAVOR=MYSQL|ORACLE|POSTGRES|MSSQL|SQLA
DB_FLAVOR=MYSQL

#
# Location of DB client library (please check the location of the jar file)
#
#SQL_CONNECTOR_JAR=/usr/share/java/ojdbc6.jar
#SQL_CONNECTOR_JAR=/usr/share/java/mysql-connector-java.jar
#SQL_CONNECTOR_JAR=/usr/share/java/postgresql.jar
#SQL_CONNECTOR_JAR=/usr/share/java/sqljdbc4.jar
#SQL_CONNECTOR_JAR=/opt/sqlanywhere17/java/sajdbc4.jar
SQL_CONNECTOR_JAR=/usr/share/java/mysql-connector-java.jar


#
# DB password for the DB admin user-id
# **************************************************************************
# ** If the password is left empty or not-defined here, 
# ** it will be prompted to enter the password during installation process 
# **************************************************************************
#
#db_root_user=root|SYS|postgres|sa|dba
#db_host=host:port              # for DB_FLAVOR=MYSQL|POSTGRES|SQLA|MSSQL       #for example: db_host=localhost:3306
#db_host=host:port:SID          # for DB_FLAVOR=ORACLE                          #for SID example: db_host=localhost:1521:ORCL
#db_host=host:port/ServiceName  # for DB_FLAVOR=ORACLE                          #for Service example: db_host=localhost:1521/XE
#db_host=host:port:GL           # for DB_FLAVOR=ORACLE                          #for TNSNAME example: db_host=localhost:1521:GL
db_root_user=root
db_root_password=
db_host=localhost
db_ssl_enabled=false
db_ssl_required=false
db_ssl_verifyServerCertificate=false
#db_ssl_auth_type=1-way|2-way, where 1-way represents standard one way ssl authentication and 2-way represents mutual ssl authentication
db_ssl_auth_type=2-way
javax_net_ssl_keyStore=
javax_net_ssl_keyStorePassword=
javax_net_ssl_trustStore=
javax_net_ssl_trustStorePassword=
#
# DB UserId used for the Ranger KMS schema
#
db_name=rangerkms
db_user=rangerkms
db_password=

#------------------------- DB CONFIG - END ----------------------------------
#KMS Server config
ranger_kms_http_enabled=true
ranger_kms_https_keystore_file=
ranger_kms_https_keystore_keyalias=rangerkms
ranger_kms_https_keystore_password=

#------------------------- RANGER KMS Master Key Crypt Key ------------------
KMS_MASTER_KEY_PASSWD=Str0ngPassw0rd

#------------------------- Ranger KMS Kerberos Configuration ---------------------------
kms_principal=
kms_keytab=
hadoop_conf=/etc/hadoop/conf

#------------------------- Ranger KMS HSM CONFIG ------------------------------
HSM_TYPE=LunaProvider
HSM_ENABLED=false
HSM_PARTITION_NAME=par19
HSM_PARTITION_PASSWORD=S@fenet123

#
# ------- UNIX User CONFIG ----------------
#
unix_user=kms
unix_user_pwd=kms
unix_group=kms
#
# ------- UNIX User CONFIG  - END ----------------
#

#
# ------- 
#

# Location of Policy Manager URL 
#
# Example:
# POLICY_MGR_URL=http://policymanager.xasecure.net:6080
#
POLICY_MGR_URL=

#
# This is the repository name created within policy manager
#
# Example:
# REPOSITORY_NAME=kmsdev
#
REPOSITORY_NAME=kmsdev

# AUDIT configuration with V3 properties

#Should audit be summarized at source
XAAUDIT.SUMMARY.ENABLE=false

# Enable audit logs to Solr
#Example
#XAAUDIT.SOLR.ENABLE=true
#XAAUDIT.SOLR.URL=http://localhost:6083/solr/ranger_audits
#XAAUDIT.SOLR.ZOOKEEPER=
#XAAUDIT.SOLR.FILE_SPOOL_DIR=/var/log/ranger/kms/audit/solr/spool

XAAUDIT.SOLR.ENABLE=false
XAAUDIT.SOLR.URL=NONE
XAAUDIT.SOLR.USER=NONE
XAAUDIT.SOLR.PASSWORD=NONE
XAAUDIT.SOLR.ZOOKEEPER=NONE
XAAUDIT.SOLR.FILE_SPOOL_DIR=/var/log/ranger/kms/audit/solr/spool

# Enable audit logs to HDFS
#Example
#XAAUDIT.HDFS.ENABLE=true
#XAAUDIT.HDFS.HDFS_DIR=hdfs://node-1.example.com:8020/ranger/audit
#  If using Azure Blob Storage
#XAAUDIT.HDFS.HDFS_DIR=wasb[s]://<containername>@<accountname>.blob.core.windows.net/<path>
#XAAUDIT.HDFS.HDFS_DIR=wasb://ranger_audit_container@my-azure-account.blob.core.windows.net/ranger/audit
#XAAUDIT.HDFS.FILE_SPOOL_DIR=/var/log/ranger/kms/audit/hdfs/spool

XAAUDIT.HDFS.ENABLE=false
XAAUDIT.HDFS.HDFS_DIR=hdfs://__REPLACE__NAME_NODE_HOST:8020/ranger/audit
XAAUDIT.HDFS.FILE_SPOOL_DIR=/var/log/ranger/kms/audit/hdfs/spool

# Following additional propertis are needed When auditing to Azure Blob Storage via HDFS
# Get these values from your /etc/hadoop/conf/core-site.xml
#XAAUDIT.HDFS.HDFS_DIR=wasb[s]://<containername>@<accountname>.blob.core.windows.net/<path>
XAAUDIT.HDFS.AZURE_ACCOUNTNAME=__REPLACE_AZURE_ACCOUNT_NAME
XAAUDIT.HDFS.AZURE_ACCOUNTKEY=__REPLACE_AZURE_ACCOUNT_KEY
XAAUDIT.HDFS.AZURE_SHELL_KEY_PROVIDER=__REPLACE_AZURE_SHELL_KEY_PROVIDER
XAAUDIT.HDFS.AZURE_ACCOUNTKEY_PROVIDER=__REPLACE_AZURE_ACCOUNT_KEY_PROVIDER

# End of V3 properties


#
#  Audit to HDFS Configuration
#
# If XAAUDIT.HDFS.IS_ENABLED is set to true, please replace tokens
# that start with __REPLACE__ with appropriate values
#  XAAUDIT.HDFS.IS_ENABLED=true
#  XAAUDIT.HDFS.DESTINATION_DIRECTORY=hdfs://__REPLACE__NAME_NODE_HOST:8020/ranger/audit/%app-type%/%time:yyyyMMdd%
#  XAAUDIT.HDFS.LOCAL_BUFFER_DIRECTORY=__REPLACE__LOG_DIR/kms/audit
#  XAAUDIT.HDFS.LOCAL_ARCHIVE_DIRECTORY=__REPLACE__LOG_DIR/kms/audit/archive
#
#
# Example:
#  XAAUDIT.HDFS.IS_ENABLED=true
#  XAAUDIT.HDFS.DESTINATION_DIRECTORY=hdfs://namenode.example.com:8020/ranger/audit/%app-type%/%time:yyyyMMdd%
#  XAAUDIT.HDFS.LOCAL_BUFFER_DIRECTORY=/var/log/kms/audit
#  XAAUDIT.HDFS.LOCAL_ARCHIVE_DIRECTORY=/var/log/kms/audit/archive
#
XAAUDIT.HDFS.IS_ENABLED=false
XAAUDIT.HDFS.DESTINATION_DIRECTORY=hdfs://__REPLACE__NAME_NODE_HOST:8020/ranger/audit/%app-type%/%time:yyyyMMdd%
XAAUDIT.HDFS.LOCAL_BUFFER_DIRECTORY=__REPLACE__LOG_DIR/kms/audit
XAAUDIT.HDFS.LOCAL_ARCHIVE_DIRECTORY=__REPLACE__LOG_DIR/kms/audit/archive

XAAUDIT.HDFS.DESTINTATION_FILE=%hostname%-audit.log
XAAUDIT.HDFS.DESTINTATION_FLUSH_INTERVAL_SECONDS=900
XAAUDIT.HDFS.DESTINTATION_ROLLOVER_INTERVAL_SECONDS=86400
XAAUDIT.HDFS.DESTINTATION_OPEN_RETRY_INTERVAL_SECONDS=60
XAAUDIT.HDFS.LOCAL_BUFFER_FILE=%time:yyyyMMdd-HHmm.ss%.log
XAAUDIT.HDFS.LOCAL_BUFFER_FLUSH_INTERVAL_SECONDS=60
XAAUDIT.HDFS.LOCAL_BUFFER_ROLLOVER_INTERVAL_SECONDS=600
XAAUDIT.HDFS.LOCAL_ARCHIVE_MAX_FILE_COUNT=10

#Solr Audit Provder
XAAUDIT.SOLR.IS_ENABLED=false
XAAUDIT.SOLR.MAX_QUEUE_SIZE=1
XAAUDIT.SOLR.MAX_FLUSH_INTERVAL_MS=1000
XAAUDIT.SOLR.SOLR_URL=http://localhost:6083/solr/ranger_audits

#
# SSL Client Certificate Information
#
# Example:
# SSL_KEYSTORE_FILE_PATH=/etc/ranger/kms/conf/ranger-plugin-keystore.jks
# SSL_KEYSTORE_PASSWORD=none
# SSL_TRUSTSTORE_FILE_PATH=/etc/ranger/kms/conf/ranger-plugin-truststore.jks
# SSL_TRUSTSTORE_PASSWORD=none
#
# You do not need use SSL between agent and security admin tool, please leave these sample value as it is.
#
SSL_KEYSTORE_FILE_PATH=/etc/ranger/kms/conf/ranger-plugin-keystore.jks
SSL_KEYSTORE_PASSWORD=myKeyFilePassword
SSL_TRUSTSTORE_FILE_PATH=/etc/ranger/kms/conf/ranger-plugin-truststore.jks
SSL_TRUSTSTORE_PASSWORD=changeit

# Custom log directory path
RANGER_KMS_LOG_DIR=$PWD

#PID file path
RANGER_KMS_PID_DIR_PATH=/var/run/ranger_kms
# #################  DO NOT MODIFY ANY VARIABLES BELOW #########################
#
# --- These deployment variables are not to be modified unless you understand the full impact of the changes
#
################################################################################
KMS_DIR=$PWD
app_home=$PWD/ews/webapp
TMPFILE=$PWD/.fi_tmp
LOGFILE=$PWD/logfile

JAVA_BIN='java'
JAVA_VERSION_REQUIRED='1.8'
JAVA_ORACLE='Java(TM) SE Runtime Environment'

mysql_core_file=db/mysql/kms_core_db.sql

oracle_core_file=db/oracle/kms_core_db_oracle.sql

postgres_core_file=db/postgres/kms_core_db_postgres.sql

sqlserver_core_file=db/sqlserver/kms_core_db_sqlserver.sql

sqlanywhere_core_file=db/sqlanywhere/kms_core_db_sqlanywhere.sql
cred_keystore_filename=$app_home/WEB-INF/classes/conf/.jceks/rangerkms.jceks

KMS_BLACKLIST_DECRYPT_EEK=hdfs