/*
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 */

/*****************************************************************************/
/*                                                                           */
/*                                 Messenger                                 */
/*                                                                           */
/*****************************************************************************/

/**
 * Constructs a proton.Messenger instance giving it an (optional) name. If name
 * is supplied that will be used as the name of the Messenger, otherwise a UUID
 * will be used. The Messenger is initialised to non-blocking mode as it makes
 * little sense to have blocking behaviour in a JavaScript implementation.
 * @classdesc The {@link proton.Messenger} class defines a high level interface for sending
 * and receiving {@link proton.Message}. Every {@link proton.Messenger} contains a
 * single logical queue of incoming messages and a single logical queue
 * of outgoing messages. These messages in these queues may be destined
 * for, or originate from, a variety of addresses.
 * <p>
 * The messenger interface is single-threaded.
 * <pre>
 * Address Syntax
 * ==============
 * </pre>
 * An address has the following form:
 * <pre>
 *   [ amqp[s]:// ] [user[:password]@] domain [/[name]]
 * </pre>
 * Where domain can be one of:
 * <pre>
 *   host | host:port | ip | ip:port | name
 * </pre>
 * The following are valid examples of addresses:
 * <pre>
 *  - example.org
 *  - example.org:1234
 *  - amqp://example.org
 *  - amqps://example.org
 *  - example.org/incoming
 *  - amqps://example.org/outgoing
 *  - amqps://fred:trustno1@example.org
 *  - 127.0.0.1:1234
 *  - amqps://127.0.0.1:1234
 *
 * Sending & Receiving Messages
 * ============================
 * </pre>
 * The {@link proton.Messenger} class works in conjuction with the {@link proton.Message} class.
 * The {@link proton.Message} class is a mutable holder of message content.
 * <p>
 * The put method copies its Message to the outgoing queue, and may
 * send queued messages if it can do so without blocking.  
 * <pre>
 *   var message = new proton.Message();
 *   for (var i = 0; i < 3; i++) {
 *      message.setAddress("amqp://host/queue");
 *      message.setSubject = ("Hello World " + i);
 *      messenger.put(message);
 *   }
 * </pre>
 * Similarly, the recv method receives messages into the incoming
 * queue. It may receive fewer than the requested number. The get method pops the
 * eldest Message off the incoming queue and copies it into the Message
 * object that you supply.
 * <pre>
 *   var message = new proton.Message();
 *   messenger.recv(10);
 *   while (messenger.incoming() > 0) {
 *      messenger.get(message);
 *      console.log(message.getSubject());
 *   }
 *   Hello World 0
 *   Hello World 1
 *   Hello World 2
 * </pre>
 *
 * @constructor proton.Messenger
 * @param {string} name the name of this Messenger instance.
 */
Module['Messenger'] = function(name) { // Messenger Constructor.
    /**
     * The emscripten idiom below is used in a number of places in the JavaScript
     * bindings to map JavaScript Strings to C style strings. ALLOC_STACK will
     * increase the stack and place the item there. When the stack is next restored
     * (by calling Runtime.stackRestore()), that memory will be automatically
     * freed. In C code compiled by emscripten saving and restoring of the stack
     * is automatic, but if we want to us ALLOC_STACK from native JavaScript we
     * need to explicitly save and restore the stack using Runtime.stackSave()
     * and Runtime.stackRestore() or we will leak emscripten heap memory.
     * See https://github.com/kripken/emscripten/wiki/Interacting-with-code
     * The _pn_messenger constructor copies the char* passed to it.
     */
    var sp = Runtime.stackSave();
    this._messenger = _pn_messenger(name ? allocate(intArrayFromString(name), 'i8', ALLOC_STACK) : 0);
    Runtime.stackRestore(sp);

    /**
     * Initiate Messenger non-blocking mode. For JavaScript we make this the
     * default behaviour and don't export this method because JavaScript is
     * fundamentally an asynchronous non-blocking execution environment.
     */
    _pn_messenger_set_blocking(this._messenger, false);

    // Set the Messenger "passive" as we are supplying our own event loop here.
    _pn_messenger_set_passive(this._messenger, true);

    // Subscriptions that haven't yet completed, used for managing subscribe events.
    this._pendingSubscriptions = [];

    // Used in the Event registration mechanism (in the 'on' and 'emit' methods).
    this._callbacks = {};

    // This call ensures that the emscripten network callback functions are initialised.
    Module.EventDispatch.registerMessenger(this);
};

Module['Messenger'].PN_CUMULATIVE = 0x1; // Protected Class attribute.

// Expose prototype as a variable to make method declarations less verbose.
var _Messenger_ = Module['Messenger'].prototype;

// ************************* Protected methods ********************************

// We use the dot notation rather than associative array form for protected
// methods so they are visible to this "package", but the Closure compiler will
// minify and obfuscate names, effectively making a defacto "protected" method.

/**
 * This helper method checks the supplied error code, converts it into an
 * exception and throws the exception. This method will try to use the message
 * populated in pn_messenger_error(), if present, but if not it will fall
 * back to using the basic error code rendering from pn_code().
 * @param {number} code the error code to check.
 */
_Messenger_._check = function(code) {
    if (code < 0 && code !== Module['Error']['INPROGRESS']) {
        var errno = this['getErrno']();
        var message = errno ? this['getError']() : Pointer_stringify(_pn_code(code));
        if (message !== 'PN_TIMEOUT') {
            if (this._callbacks['error']) {
console.log("emitting " + message);
                this._emit('error', new Module['MessengerError'](message));
            } else {
console.log("throwing " + message);
                throw new Module['MessengerError'](message);
            }
        }
    }

    return code;
};

/**
 * Invokes the callbacks registered for a specified event.
 * @method _emit
 * @memberof! proton.Messenger#
 * @param event {string} the event we want to emit.
 * @param param {object} the parameter we'd like to pass to the event callback.
 */
_Messenger_._emit = function(event, param) {
    var callbacks = this._callbacks[event];
    if (callbacks) {
        for (var i = 0; i < callbacks.length; i++) {
            var callback = callbacks[i];
            if ('function' === typeof callback) {
                callback.call(this, param);
            }
        }
    }
};

/**
 * Checks any pending subscriptions and when a source address becomes available
 * emit a subscription event passing the Subscription that triggered the event.
 * Note that this doesn't seem to work for listen/bind style subscriptions,
 * that is to say subscriptions of the form amqp://~0.0.0.0, don't know why?
 * As a workaround the subscribe call emits a subscription event immediately for
 * peer subscriptions to the local Messenger, this *should* be OK.
 */
_Messenger_._checkSubscriptions = function() {
    // Check for completed subscriptions, and emit subscribe event.
    var subscriptions = this._pendingSubscriptions;
    if (subscriptions.length) {
        var pending = []; // Array of any subscriptions that remain pending.
        for (var j = 0; j < subscriptions.length; j++) {
            subscription = subscriptions[j];
            if (subscription['getAddress']()) {
                this._emit('subscription', subscription);
            } else {
                pending.push(subscription);
            }
        }
        this._pendingSubscriptions = pending;
    }
};


// *************************** Public methods *****************************

/**
 * N.B. The following methods are not exported by the JavaScript Messenger
 * binding for reasons described below.
 *
 * For these methods it is expected that security would be implemented via
 * a secure WebSocket. TODO what happens if we decide to implement TCP sockets
 * via Node.js net library. If we do that we may want to compile OpenSSL
 * using emscripten and include these methods.
 * pn_messenger_set_certificate()
 * pn_messenger_get_certificate()
 * pn_messenger_set_private_key()
 * pn_messenger_get_private_key()
 * pn_messenger_set_password()
 * pn_messenger_get_password()
 * pn_messenger_set_trusted_certificates()
 * pn_messenger_get_trusted_certificates()
 *
 * For these methods the implementation is fairly meaningless because JavaScript
 * is a fundamentally asynchronous non-blocking environment.
 * pn_messenger_set_timeout()
 * pn_messenger_set_blocking()
 * pn_messenger_interrupt()
 * pn_messenger_work() - omitted because we have our own JavaScript Event loop.
 */

/**
 * Registers a listener callback for a specified event.
 * @method on
 * @memberof! proton.Messenger#
 * @param {string} event the event we want to listen for.
 * @param {function} callback the callback function to be registered for the specified event.
 */
_Messenger_['on'] = function(event, callback) {
    if ('function' === typeof callback) {
        if (!this._callbacks[event]) {
            this._callbacks[event] = [];
        }

        this._callbacks[event].push(callback);
    }
};

/**
 * Removes a listener callback for a specified event.
 * @method removeListener
 * @memberof! proton.Messenger#
 * @param {string} event the event we want to detach from.
 * @param {function} callback the callback function to be removed for the specified event.
 *        if no callback is specified all callbacks are removed for the event.
 */
_Messenger_['removeListener'] = function(event, callback) {
    if (callback) {
        var callbacks = this._callbacks[event];
        if ('function' === typeof callback && callbacks) {
            // Search for the specified callback.
            for (var i = 0; i < callbacks.length; i++) {
                if (callback === callbacks[i]) {
                    // If we find the specified callback, delete it and return.
                    callbacks.splice(i, 1);
                    return;
                }
            }
        }
    } else {
        // If we call remove with no callback specified we remove all callbacks.
        delete this._callbacks[event];
    }
};

/**
 * Retrieves the name of a Messenger.
 * @method getName
 * @memberof! proton.Messenger#
 * @returns {string} the name of the messenger.
 */
_Messenger_['getName'] = function() {
    return Pointer_stringify(_pn_messenger_name(this._messenger));
};

/**
 * Retrieves the timeout for a Messenger.
 * @method getTimeout
 * @memberof! proton.Messenger#
 * @returns {number} zero because JavaScript is fundamentally non-blocking.
 */
_Messenger_['getTimeout'] = function() {
    return 0;
};

/**
 * Accessor for messenger blocking mode.
 * @method isBlocking
 * @memberof! proton.Messenger#
 * @returns {boolean} false because JavaScript is fundamentally non-blocking.
 */
_Messenger_['isBlocking'] = function() {
    return false;
};

/**
 * Free the Messenger. This will close all connections that are managed
 * by the Messenger. Call the stop method before destroying the Messenger.
 * <p>
 * N.B. This method has to be called explicitly in JavaScript as we can't
 * intercept finalisers, so we need to remember to free before removing refs.
 * @method free
 * @memberof! proton.Messenger#
 */
_Messenger_['free'] = function() {
    // This call ensures that the emscripten network callback functions are removed.
    Module.EventDispatch.unregisterMessenger(this);
    _pn_messenger_free(this._messenger);
};

/**
 * @method getErrno
 * @memberof! proton.Messenger#
 * @returns {number} the most recent error message code.
 */
_Messenger_['getErrno'] = function() {
    return _pn_messenger_errno(this._messenger);
};

/**
 * @method getError
 * @memberof! proton.Messenger#
 * @returns {string} the most recent error message as a String.
 */
_Messenger_['getError'] = function() {
    return Pointer_stringify(_pn_error_text(_pn_messenger_error(this._messenger)));
};

/**
 * Returns the size of the outgoing window that was set with setOutgoingWindow.
 * The default is 0.
 * @method getOutgoingWindow
 * @memberof! proton.Messenger#
 * @returns {number} the outgoing window size.
 */
_Messenger_['getOutgoingWindow'] = function() {
    return _pn_messenger_get_outgoing_window(this._messenger);
};

/**
 * Sets the outgoing tracking window for the Messenger. The Messenger will
 * track the remote status of this many outgoing deliveries after calling
 * send. Defaults to zero.
 * <p>
 * A Message enters this window when you call put() with the Message.
 * If your outgoing window size is n, and you call put() n+1 times, status
 * information will no longer be available for the first Message.
 * @method setOutgoingWindow
 * @memberof! proton.Messenger#
 * @param {number} window the size of the tracking window in messages.
 */
_Messenger_['setOutgoingWindow'] = function(window) {
    _pn_messenger_set_outgoing_window(this._messenger, window);
};

/**
 * Returns the size of the incoming window that was set with setIncomingWindow.
 * The default is 0.
 * @method getIncomingWindow
 * @memberof! proton.Messenger#
 * @returns {number} the incoming window size.
 */
_Messenger_['getIncomingWindow'] = function() {
    return _pn_messenger_get_incoming_window(this._messenger);
};

/**
 * Sets the incoming tracking window for the Messenger. The Messenger will
 * track the remote status of this many incoming deliveries after calling
 * send. Defaults to zero.
 * <p>
 * Messages enter this window only when you take them into your application
 * using get(). If your incoming window size is n, and you get() n+1 messages
 * without explicitly accepting or rejecting the oldest message, then the
 * Message that passes beyond the edge of the incoming window will be assigned
 * the default disposition of its link.
 * @method setIncomingWindow
 * @memberof! proton.Messenger#
 * @param {number} window the size of the tracking window in messages.
 */
_Messenger_['setIncomingWindow'] = function(window) {
    _pn_messenger_set_incoming_window(this._messenger, window);
};

/**
 * Currently a no-op placeholder. For future compatibility, do not send or
 * recv messages before starting the Messenger.
 * @method start
 * @memberof! proton.Messenger#
 */
_Messenger_['start'] = function() {
    this._check(_pn_messenger_start(this._messenger));
};

/**
 * Transitions the Messenger to an inactive state. An inactive Messenger
 * will not send or receive messages from its internal queues. A Messenger
 * should be stopped before being discarded to ensure a clean shutdown
 * handshake occurs on any internally managed connections.
 * <p>
 * The Messenger may require some time to stop if it is busy, so it is
 * necessary to call isStopped to see if it has fully stopped.
 * @method stop
 * @memberof! proton.Messenger#
 */
_Messenger_['stop'] = function() {
    _pn_messenger_stop(this._messenger);

    // When we call stop it's quite likely that it will be busy. We call
    // Module.EventDispatch.pump to flush the Messenger Event loop, but we
    // wrap the call in a setTimeout to make sure that any Events generated
    // by the flush occur on the next "tick" of the JavaScript Event loop.
    setTimeout(Module.EventDispatch.pump, 0);
};

/**
 * Returns true iff a Messenger is in the stopped state.
 * @method isStopped
 * @memberof! proton.Messenger#
 * @returns {boolean} true iff a Messenger is in the stopped state.
 */
_Messenger_['isStopped'] = function() {
    return (_pn_messenger_stopped(this._messenger) > 0);
};

/**
 * Subscribes the Messenger to messages originating from the
 * specified source. The source is an address as specified in the
 * Messenger introduction with the following addition. If the
 * domain portion of the address begins with the '~' character, the
 * Messenger will interpret the domain as host/port, bind to it,
 * and listen for incoming messages. For example "~0.0.0.0",
 * "amqp://~0.0.0.0", and "amqps://~0.0.0.0" will all bind to any
 * local interface and listen for incoming messages with the last
 * variant only permitting incoming SSL connections.
 * @method subscribe
 * @memberof! proton.Messenger#
 * @param {string} source the source address we're subscribing to.
 * @returns {Subscription} a subscription.
 */
_Messenger_['subscribe'] = function(source) {
    if (!source) {
        this._emit('error', new Module['SubscriptionError'](source, 'CONNECTION ERROR: Address not specified'));
    } else {
        return Module.EventDispatch.subscribe(this, source);
    }
};

/**
 * Places the content contained in the message onto the outgoing queue
 * of the Messenger. This method will never block, however it will send any
 * unblocked Messages in the outgoing queue immediately and leave any blocked
 * Messages remaining in the outgoing queue. The outgoing property may be
 * used to check the depth of the outgoing queue.
 * <p>
 * When the content in a given Message object is copied to the outgoing
 * message queue, you may then modify or discard the Message object
 * without having any impact on the content in the outgoing queue.
 * <p>
 * This method returns an outgoing tracker for the Message.  The tracker
 * can be used to determine the delivery status of the Message.
 * @method put
 * @memberof! proton.Messenger#
 * @param {proton.Message} message a Message to send.
 * @returns {proton.Data.Long} a tracker.
 */
_Messenger_['put'] = function(message) {
    message._preEncode();
    this._check(_pn_messenger_put(this._messenger, message._message));

    // Getting the tracker is a little tricky as it is a 64 bit number. The way
    // emscripten handles this is to return the low 32 bits directly and pass
    // the high 32 bits via the tempRet0 variable. We use Data.Long to pass the
    // low/high pair around to methods that require a tracker.
    var low = _pn_messenger_outgoing_tracker(this._messenger);
    var high = Runtime.getTempRet0();
    return new Data.Long(low, high);
};

/**
 * Send messages from a Messenger's outgoing queue. This method forces the Event
 * loop to pump data for as long as the underlying socket remains writeable.
 * Note that after calling send() applications should yield control to the JavaScript
 * Event loop by calling setTimeout() or process.nextTick() so that the underlying
 * network processing can actually take place.
 * @method send
 * @memberof! proton.Messenger#
 */
_Messenger_['send'] = function(number) {
    Module.EventDispatch.pump();
};

/**
 * Gets the aggregate bufferedAmount values from all of the underlying WebSockets.
 * This value represents the amount of data buffered but not yet sent over the
 * network. If it grows too high it is a sign that the application is sending too
 * much data and should be throttled by yielding control to the JavaScript Event loop.
 * @method getBufferedAmount
 * @memberof! proton.Messenger#
 * @returns {number} the total amount of data buffered by the Messenger's sockets.
 */
_Messenger_['getBufferedAmount'] = function() {
    return Module.EventDispatch.getBufferedAmount(this);
};

/**
 * Gets the last known remote state of the delivery associated with the given tracker.
 * @method status
 * @memberof! proton.Messenger#
 * @param {proton.Data.Long} tracker the tracker whose status is to be retrieved.
 * @returns {proton.Status} one of None, PENDING, REJECTED, or ACCEPTED.
 */
_Messenger_['status'] = function(tracker) {
    if (tracker == null) { // Use == not === to check for both null and undefined.
        var low = _pn_messenger_outgoing_tracker(this._messenger);
        var high = Runtime.getTempRet0();
        tracker = new Data.Long(low, high);
    }

    return _pn_messenger_status(this._messenger, tracker.getLowBitsUnsigned(), tracker.getHighBits());
};

/**
 * Checks if the delivery associated with the given tracker is still waiting to be sent.
 * @method isBuffered
 * @memberof! proton.Messenger#
 * @param {proton.Data.Long} tracker the tracker identifying the delivery.
 * @returns {boolean} true if delivery is still buffered.
 */
_Messenger_['isBuffered'] = function(tracker) {
    if (tracker == null) { // Use == not === to check for both null and undefined.
        var low = _pn_messenger_outgoing_tracker(this._messenger);
        var high = Runtime.getTempRet0();
        tracker = new Data.Long(low, high);
    }

    return (_pn_messenger_buffered(this._messenger, tracker.getLowBitsUnsigned(), tracker.getHighBits()) > 0);
};

/**
 * Frees a Messenger from tracking the status associated with a given tracker.
 * If you don't supply a tracker, all outgoing messages up to the most recent
 * will be settled.
 * @method settle
 * @memberof! proton.Messenger#
 * @param {proton.Data.Long} tracker the tracker identifying the delivery.
 */
_Messenger_['settle'] = function(tracker) {
    // Getting the tracker is a little tricky as it is a 64 bit number. The way
    // emscripten handles this is to return the low 32 bits directly and pass
    // the high 32 bits via the tempRet0 variable. We use Data.Long to pass the
    // low/high pair around to methods that require a tracker.
    var flags = 0;
    if (tracker == null) { // Use == not === to check for both null and undefined.
        var low = _pn_messenger_outgoing_tracker(this._messenger);
        var high = Runtime.getTempRet0();
        tracker = new Data.Long(low, high);
        flags = Module['Messenger'].PN_CUMULATIVE;
    }

    _pn_messenger_settle(this._messenger, tracker.getLowBitsUnsigned(), tracker.getHighBits(), flags);
};

/**
 * Receives up to limit messages into the incoming queue.  If no value for limit
 * is supplied, this call will receive as many messages as it can buffer internally.
 * @method recv
 * @memberof! proton.Messenger#
 * @param {number} limit the maximum number of messages to receive. If unspecified
 *        receive as many messages as it can buffer internally.
 */
_Messenger_['recv'] = function(limit) {
    _pn_messenger_recv(this._messenger, (limit ? limit : -1));
};

/**
 * Returns the capacity of the incoming message queue of messenger. Note this
 * count does not include those messages already available on the incoming queue.
 * @method receiving
 * @memberof! proton.Messenger#
 * @returns {number} the message queue capacity.
 */
_Messenger_['receiving'] = function() {
    return _pn_messenger_receiving(this._messenger);
};

/**
 * Moves the message from the head of the incoming message queue into the
 * supplied message object. Any content in the message will be overwritten.
 * <p>
 * A tracker for the incoming Message is returned. The tracker can later be
 * used to communicate your acceptance or rejection of the Message.
 * @method get
 * @memberof! proton.Messenger#
 * @param {proton.Message} message the destination message object. If no Message
 *        object is supplied, the Message popped from the head of the queue is discarded.
 * @param {boolean} decodeBinaryAsString if set decode any AMQP Binary payload
 *        objects as strings. This can be useful as the data in Binary objects
 *        will be overwritten with subsequent calls to get, so they must be
 *        explicitly copied. Needless to say it is only safe to set this flag if
 *        you know that the data you are dealing with is actually a string, for
 *        example C/C++ applications often seem to encode strings as AMQP binary,
 *        a common cause of interoperability problems.
 * @returns {proton.Data.Long} a tracker for the incoming Message.
 */
_Messenger_['get'] = function(message, decodeBinaryAsString) {
    var impl = null;
    if (message) {
        impl = message._message;
    }

    _pn_messenger_get(this._messenger, impl);

    if (message) {
        message._postDecode(decodeBinaryAsString);
    }

    // Getting the tracker is a little tricky as it is a 64 bit number. The way
    // emscripten handles this is to return the low 32 bits directly and pass
    // the high 32 bits via the tempRet0 variable. We use Data.Long to pass the
    // low/high pair around to methods that require a tracker.
    var low = _pn_messenger_incoming_tracker(this._messenger);
    var high = Runtime.getTempRet0();
    return new Data.Long(low, high);
};

/**
 * Returns the Subscription of the Message returned by the most recent call
 * to get, or null if pn_messenger_get has not yet been called.
 * @method incomingSubscription
 * @memberof! proton.Messenger#
 * @returns {Subscription} a Subscription or null if get has never been called
 *          for this Messenger.
 */
_Messenger_['incomingSubscription'] = function() {
    var subscription = _pn_messenger_incoming_subscription(this._messenger);
    if (subscription) {
        return new Subscription(subscription);
    } else {
        return null;
    }
};

/**
 * Signal the sender that you have acted on the Message pointed to by the tracker.
 * If no tracker is supplied, then all messages that have been returned by the
 * get method are accepted, except those that have already been auto-settled
 * by passing beyond your incoming window size.
 * @method accept
 * @memberof! proton.Messenger#
 * @param {proton.Data.Long} tracker the tracker identifying the delivery.
 */
_Messenger_['accept'] = function(tracker) {
    // Getting the tracker is a little tricky as it is a 64 bit number. The way
    // emscripten handles this is to return the low 32 bits directly and pass
    // the high 32 bits via the tempRet0 variable. We use Data.Long to pass the
    // low/high pair around to methods that require a tracker.
    var flags = 0;
    if (tracker == null) { // Use == not === to check for both null and undefined.
        var low = _pn_messenger_incoming_tracker(this._messenger);
        var high = Runtime.getTempRet0();
        tracker = new Data.Long(low, high);
        flags = Module['Messenger'].PN_CUMULATIVE;
    }

    this._check(_pn_messenger_accept(this._messenger, tracker.getLowBitsUnsigned(), tracker.getHighBits(), flags));
};

/**
 * Rejects the Message indicated by the tracker.  If no tracker is supplied,
 * all messages that have been returned by the get method are rejected, except
 * those already auto-settled by passing beyond your outgoing window size.
 * @method reject
 * @memberof! proton.Messenger#
 * @param {proton.Data.Long} tracker the tracker identifying the delivery.
 */
_Messenger_['reject'] = function(tracker) {
    // Getting the tracker is a little tricky as it is a 64 bit number. The way
    // emscripten handles this is to return the low 32 bits directly and pass
    // the high 32 bits via the tempRet0 variable. We use Data.Long to pass the
    // low/high pair around to methods that require a tracker.
    var flags = 0;
    if (tracker == null) { // Use == not === to check for both null and undefined.
        var low = _pn_messenger_incoming_tracker(this._messenger);
        var high = Runtime.getTempRet0();
        tracker = new Data.Long(low, high);
        flags = Module['Messenger'].PN_CUMULATIVE;
    }

    this._check(_pn_messenger_reject(this._messenger, tracker.getLowBitsUnsigned(), tracker.getHighBits(), flags));
};

/**
 * Returns the number of messages in the outgoing message queue of a messenger.
 * @method outgoing
 * @memberof! proton.Messenger#
 * @returns {number} the outgoing queue depth.
 */
_Messenger_['outgoing'] = function() {
    return _pn_messenger_outgoing(this._messenger);
};

/**
 * Returns the number of messages in the incoming message queue of a messenger.
 * @method incoming
 * @memberof! proton.Messenger#
 * @returns {number} the incoming queue depth.
 */
_Messenger_['incoming'] = function() {
    return _pn_messenger_incoming(this._messenger);
};

/**
 * Adds a routing rule to a Messenger's internal routing table.
 * <p>
 * The route method may be used to influence how a messenger will internally treat
 * a given address or class of addresses. Every call to the route method will
 * result in messenger appending a routing rule to its internal routing table.
 * <p>
 * Whenever a message is presented to a messenger for delivery, it will match the
 * address of this message against the set of routing rules in order. The first
 * rule to match will be triggered, and instead of routing based on the address
 * presented in the message, the messenger will route based on the address supplied
 * in the rule.
 * <p>
 * The pattern matching syntax supports two types of matches, a '' will match any
 * character except a '/', and a '*' will match any character including a '/'.
 * <p>
 * A routing address is specified as a normal AMQP address, however it may
 * additionally use substitution variables from the pattern match that triggered
 * the rule.
 * <p>
 * Any message sent to "foo" will be routed to "amqp://foo.com":
 * <pre>
 * route("foo", "amqp://foo.com");
 * </pre>
 * Any message sent to "foobar" will be routed to "amqp://foo.com/bar":
 * <pre>
 * route("foobar", "amqp://foo.com/bar");
 * </pre>
 * Any message sent to bar/<path> will be routed to the corresponding path within
 * the amqp://bar.com domain:
 * <pre>
 * route("bar/*", "amqp://bar.com/$1");
 * </pre>
 * Supply credentials for foo.com:
 * <pre>
 * route("amqp://foo.com/*", "amqp://user:password@foo.com/$1");
 * </pre>
 * Supply credentials for all domains:
 * <pre>
 * route("amqp://*", "amqp://user:password@$1");
 * </pre>
 * Route all addresses through a single proxy while preserving the original destination:
 * <pre>
 * route("amqp://%/*", "amqp://user:password@proxy/$1/$2");
 * </pre>
 * Route any address through a single broker:
 * <pre>
 * route("*", "amqp://user:password@broker/$1");
 * </pre>
 * @method route
 * @memberof! proton.Messenger#
 * @param {string} pattern a glob pattern to select messages.
 * @param {string} address an address indicating outgoing address rewrite.
 */
_Messenger_['route'] = function(pattern, address) {
    var sp = Runtime.stackSave();
    _pn_messenger_route(this._messenger,
                        allocate(intArrayFromString(pattern), 'i8', ALLOC_STACK),
                        allocate(intArrayFromString(address), 'i8', ALLOC_STACK));
    Runtime.stackRestore(sp);
};

/**
 * Rewrite message addresses prior to transmission.
 * <p>
 * Similar to route(), except that the destination of the Message is determined
 * before the message address is rewritten.
 * <p>
 * The outgoing address is only rewritten after routing has been finalized. If
 * a message has an outgoing address of "amqp://0.0.0.0:5678", and a rewriting
 * rule that changes its outgoing address to "foo", it will still arrive at the
 * peer that is listening on "amqp://0.0.0.0:5678", but when it arrives there,
 * the receiver will see its outgoing address as "foo".
 * <p>
 * The default rewrite rule removes username and password from addresses
 * before they are transmitted.
 * @method rewrite
 * @memberof! proton.Messenger#
 * @param {string} pattern a glob pattern to select messages.
 * @param {string} address an address indicating outgoing address rewrite.
 */
_Messenger_['rewrite'] = function(pattern, address) {
    var sp = Runtime.stackSave();
    _pn_messenger_rewrite(this._messenger,
                          allocate(intArrayFromString(pattern), 'i8', ALLOC_STACK),
                          allocate(intArrayFromString(address), 'i8', ALLOC_STACK));
    Runtime.stackRestore(sp);
};