blob: 7de3f2b6024eb7b0e4e5bcf268e19149de63e1a5 [file] [log] [blame]
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
# This will run the following test cases defined below and produce
# a report in tabular format.
COMMON_CONFIG="-server -Durl=amqp://guest:guest@clientid/testpath?brokerlist='tcp://localhost:5672'"
waitfor() { until grep -a -l "$2" $1 >/dev/null 2>&1 ; do sleep 1 ; done ; }
pids=`ps aux | grep java | grep Perf | awk '{print $2}'`
if [ "$pids" != "" ]; then
kill -3 $pids
kill -9 $pids >/dev/null 2>&1
# $1 test name
# $2 consumer options
# $3 producer options
sh run-sub $COMMON_CONFIG $2 > sub.out &
sh run-pub $COMMON_CONFIG $3 > pub.out &
waitfor pub.out "Controller: Completed the test"
sleep 2 #give a grace period to shutdown
print_result $1
mv pub.out $
mv sub.out $1.sub.out
prod_rate=`cat pub.out | grep "Avg Producer rate" | awk '{print $5}'`
sys_rate=`cat pub.out | grep "System Throughput" | awk '{print $4}'`
cons_rate=`cat pub.out | grep "Avg Consumer rate" | awk '{print $5}'`
avg_latency=`cat pub.out | grep "Avg System Latency" | awk '{print $5}'`
min_latency=`cat pub.out | grep "Min System Latency" | awk '{print $5}'`
max_latency=`cat pub.out | grep "Max System Latency" | awk '{print $5}'`
printf "|%-15s|%15.2f|%13.2f|%13.2f|%11.2f|%11.2f|%11.2f|\n" $1 $sys_rate $prod_rate $cons_rate $avg_latency $min_latency $max_latency
echo "------------------------------------------------------------------------------------------------"
trap cleanup EXIT
rm -rf *.out #cleanup old files.
echo "Test report on " `date +%F`
echo "================================================================================================"
echo "|Test |System throuput|Producer rate|Consumer Rate|Avg Latency|Min Latency|Max Latency|"
echo "------------------------------------------------------------------------------------------------"
# The message counts and warmup counts are set to very low values for quick testing of the script.
# For a real performance run I recommend setting warmup count to 10k and message count in excess of 100k
# However for transactions, sync_publish and especially small durable transactions (which is quite slow) I recommend
# setting very low values to start with and experiment while increasing them slowly.
# Test 1 Trans Queue
run_testcase "Trans_Queue" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Dwarmup_count=1 -Dmsg_count=10"
# Test 2 Dura Queue
run_testcase "Dura_Queue" "-Daddress=$DURA_QUEUE -Ddurable=true" "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10"
# Test 3 Dura Queue Sync
run_testcase "Dura_Queue_Sync" "-Daddress=$DURA_QUEUE -Ddurable=true" "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10 -Dsync_publish=persistent"
# Test 4 Dura Queue Sync Publish and Ack
run_testcase "Dura_SyncPubAck" "-Daddress=$DURA_QUEUE -Ddurable=true -Dsync_ack=true" "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10 -Dsync_publish=persistent"
# Test 5 Topic
run_testcase "Topic" "-Daddress=$TOPIC" "-Daddress=$TOPIC -Dwarmup_count=1 -Dmsg_count=10"
# Test 6 Durable Topic
run_testcase "Dura_Topic" "-Daddress=$DURA_TOPIC -Ddurable=true" "-Daddress=$DURA_TOPIC -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10"
# Test 7 Fanout
run_testcase "Fanout" "-Daddress=amq.fanout" "-Daddress=amq.fanout -Dwarmup_count=1 -Dmsg_count=10"
# Test 8 Small TX
run_testcase "Small_Txs_2" "-Daddress=$DURA_QUEUE -Ddurable=true -Dtransacted=true -Dtrans_size=1" \
"-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10 -Dtransacted=true -Dtrans_size=1"
# Test 9 Large TX
run_testcase "Large_Txs_1000" "-Daddress=$DURA_QUEUE -Ddurable=true -Dtransacted=true -Dtrans_size=10" \
"-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10 -Dtransacted=true -Dtrans_size=10"
# Test 10 256 MSG
run_testcase "Msg_256b" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Dmsg_size=256 -Dwarmup_count=1 -Dmsg_count=10"
# Test 11 512 MSG
run_testcase "Msg_512b" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Dmsg_size=512 -Dwarmup_count=1 -Dmsg_count=10"
# Test 12 2048 MSG
run_testcase "Msg_2048b" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Dmsg_size=2048 -Dwarmup_count=1 -Dmsg_count=10"
# Test 13 Random size MSG
run_testcase "Random_Msg_Size" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Drandom_msg_size=true -Dwarmup_count=1 -Dmsg_count=10"
# Test 14 Random size MSG Durable
run_testcase "Rand_Msg_Dura" "-Daddress=$DURA_QUEUE -Ddurable=true" "-Daddress=$DURA_QUEUE -Ddurable=true -Drandom_msg_size=true -Dwarmup_count=1 -Dmsg_count=10"
# Test 15 64K MSG
run_testcase "Msg_64K" "-Daddress=$QUEUE -Damqj.tcpNoDelay=true" "-Daddress=$QUEUE -Damqj.tcpNoDelay=true -Dmsg_size=64000 -Dwarmup_count=1 -Dmsg_count=10"
# Test 16 Durable 64K MSG
run_testcase "Msg_Durable_64K" "-Daddress=$DURA_QUEUE -Ddurable=true -Damqj.tcpNoDelay=true" \
"-Daddress=$DURA_QUEUE -Damqj.tcpNoDelay=true -Dmsg_size=64000 -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10"
# Test 17 500K MSG
run_testcase "Msg_500K" "-Daddress=$QUEUE -Damqj.tcpNoDelay=true" "-Daddress=$QUEUE -Damqj.tcpNoDelay=true -Dmsg_size=500000 -Dwarmup_count=1 -Dmsg_count=10"
# Test 18 Durable 500K MSG
run_testcase "Msg_Dura_500K" "-Daddress=$DURA_QUEUE -Damqj.tcpNoDelay=true -Ddurable=true" \
"-Daddress=$DURA_QUEUE -Damqj.tcpNoDelay=true -Dmsg_size=500000 -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10"