#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
<% if @clamav_enabled -%>
## Amavis has been enabled because @amavisd is declared
policy-spf unix    -       n       n       -       0     spawn
      user=nobody argv=/usr/bin/policyd-spf

# AV scan filter (used by content_filter)
scan      unix  -       -       n       -       16      smtp
        -o smtp_send_xforward_command=yes

# For injecting mail back into postfix from the filter
127.0.0.1:10025 inet n    -       -       -       -     smtpd
     -o content_filter=
     -o smtpd_delay_reject=no
     -o smtpd_client_restrictions=permit_mynetworks,reject
     -o smtpd_helo_restrictions=
     -o smtpd_sender_restrictions=
     -o smtpd_recipient_restrictions=permit_mynetworks,reject
     -o smtpd_data_restrictions=reject_unauth_pipelining
     -o smtpd_end_of_data_restrictions=
     -o smtpd_restriction_classes=
     -o mynetworks=127.0.0.0/8
     -o smtpd_error_sleep_time=0
     -o smtpd_soft_error_limit=1001
     -o smtpd_hard_error_limit=1000
     -o smtpd_client_connection_count_limit=0
     -o smtpd_client_connection_rate_limit=0
     -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks,no_milters
     -o local_header_rewrite_clients=
     -o smtpd_milters=
     -o local_recipient_maps=
     -o relay_recipient_maps=
<% end -%>

<% if @asf_mx_enabled -%>
smtp-amavis     unix    -       -       -       -       2       smtp
        -o smtp_data_done_timeout=1200
        -o smtp_send_xforward_command=yes
        -o disable_dns_lookups=yes
        -o max_use=20
<% end -%>

<% unless @postscreen -%>
smtp      inet  n       -       n       -       -       smtpd
<% else -%>
smtp      inet  n       -       n       -       1       postscreen
tlsproxy  unix  -       -       n       -       0       tlsproxy
dnsblog   unix  -       -       n       -       0       dnsblog
smtpd     pass  -       -       n       -       -       smtpd
<% end -%>
<% @smtp_content_filter.each do |content_filter| -%>
  -o content_filter=<%= content_filter %>
<% end -%>
<% if @submission -%>
submission inet n       -       n       -       -       smtpd
  -o smtpd_tls_security_level=<%= @submission_smtpd_tls_security_level %>
  -o smtpd_sasl_auth_enable=<%= @submission_smtpd_sasl_auth_enable %>
  -o smtpd_client_restrictions=<%= @submission_smtpd_client_restrictions %>
  -o milter_macro_daemon_name=ORIGINATING
<% end -%>
<% if @ssl -%>
smtps     inet  n       -       n       -       -       smtpd
  -o smtpd_tls_wrappermode=yes
  -o smtpd_sasl_auth_enable=<%= @smtps_smtpd_sasl_auth_enable %>
  -o smtpd_client_restrictions=<%= @smtps_smtpd_client_restrictions %>
  -o milter_macro_daemon_name=ORIGINATING
<% if @smtps_content_filter -%>
<% @smtps_content_filter.each do |content_filter| -%>
  -o content_filter=<%= content_filter %>
<% end -%>
<% end -%>
<% end -%>
<% if @spamassassin_enabled == true -%>
spamassassin unix -     n       n       -       -       pipe
     flags=Rq user=debian-spamd argv=/usr/bin/spamfilter.sh -oi -f ${sender} ${recipient}
<% end -%>

#628      inet  n       -       n       -       -       qmqpd
pickup    fifo  n       -       n       60      1       pickup
cleanup   unix  n       -       n       -       0       cleanup
qmgr      fifo  n       -       n       300     1       qmgr
#qmgr     fifo  n       -       n       300     1       oqmgr
tlsmgr    unix  -       -       n       1000?   1       tlsmgr
rewrite   unix  -       -       n       -       -       trivial-rewrite
bounce    unix  -       -       n       -       0       bounce
defer     unix  -       -       n       -       0       bounce
trace     unix  -       -       n       -       0       bounce
verify    unix  -       -       n       -       1       verify
flush     unix  n       -       n       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
proxywrite unix -       -       n       -       1       proxymap
smtp      unix  -       -       n       -       -       smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay     unix  -       -       n       -       -       smtp
	-o smtp_fallback_relay=
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       n       -       -       showq
error     unix  -       -       n       -       -       error
retry     unix  -       -       n       -       -       error
discard   unix  -       -       n       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       n       -       -       lmtp
anvil     unix  -       -       n       -       1       anvil
scache    unix  -       -       n       -       1       scache

#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
#maildrop  unix  -       n       n       -       -       pipe
#  flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# The Cyrus deliver program has changed incompatibly, multiple times.
#
#old-cyrus unix  -       n       n       -       -       pipe
#  flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus     unix  -       n       n       -       -       pipe
#  user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
#uucp      unix  -       n       n       -       -       pipe
#  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# ====================================================================
#
# Other external delivery methods.
#
#ifmail    unix  -       n       n       -       -       pipe
#  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
#
#bsmtp     unix  -       n       n       -       -       pipe
#  flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
#
#scalemail-backend unix -       n       n       -       2       pipe
#  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
#  ${nexthop} ${user} ${extension}
#
#mailman   unix  -       n       n       -       -       pipe
#  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
#  ${nexthop} ${user}
<% if @virtual_transport == 'dovecot' -%>
dovecot   unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail:vmail argv=<%= @dovecot_directory %>/deliver -f ${sender} -d <%= @dovecot_destination %>
<% end -%>
<% @master_services.each do |service| -%>
<%= service %>
<% end -%>