#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
#

## Bookie settings

#############################################################################
## Server parameters
#############################################################################

# Port that bookie server listen on
bookiePort=3181

# Directories BookKeeper outputs its write ahead log.
# Could define multi directories to store write head logs, separated by ','.
# For example:
#   journalDirectories=/tmp/bk-journal1,/tmp/bk-journal2
# If journalDirectories is set, bookies will skip journalDirectory and use
# this setting directory.
# journalDirectories=/tmp/bk-journal

# Directory Bookkeeper outputs its write ahead log
# @deprecated since 4.5.0. journalDirectories is preferred over journalDirectory.
journalDirectory=data/bookkeeper/journal

# Configure the bookie to allow/disallow multiple ledger/index/journal directories
# in the same filesystem disk partition
# allowMultipleDirsUnderSameDiskPartition=false

# Minimum safe Usable size to be available in index directory for bookie to create
# Index File while replaying journal at the time of bookie Start in Readonly Mode (in bytes)
minUsableSizeForIndexFileCreation=1073741824

# Set the network interface that the bookie should listen on.
# If not set, the bookie will listen on all interfaces.
# listeningInterface=eth0

# Configure a specific hostname or IP address that the bookie should use to advertise itself to
# clients. If not set, bookie will advertised its own IP address or hostname, depending on the
# listeningInterface and useHostNameAsBookieID settings.
advertisedAddress=

# Whether the bookie allowed to use a loopback interface as its primary
# interface(i.e. the interface it uses to establish its identity)?
# By default, loopback interfaces are not allowed as the primary
# interface.
# Using a loopback interface as the primary interface usually indicates
# a configuration error. For example, its fairly common in some VPS setups
# to not configure a hostname, or to have the hostname resolve to
# 127.0.0.1. If this is the case, then all bookies in the cluster will
# establish their identities as 127.0.0.1:3181, and only one will be able
# to join the cluster. For VPSs configured like this, you should explicitly
# set the listening interface.
allowLoopback=false

# Interval to watch whether bookie is dead or not, in milliseconds
bookieDeathWatchInterval=1000

# When entryLogPerLedgerEnabled is enabled, checkpoint doesn't happens
# when a new active entrylog is created / previous one is rolled over.
# Instead SyncThread checkpoints periodically with 'flushInterval' delay
# (in milliseconds) in between executions. Checkpoint flushes both ledger
# entryLogs and ledger index pages to disk.
# Flushing entrylog and index files will introduce much random disk I/O.
# If separating journal dir and ledger dirs each on different devices,
# flushing would not affect performance. But if putting journal dir
# and ledger dirs on same device, performance degrade significantly
# on too frequent flushing. You can consider increment flush interval
# to get better performance, but you need to pay more time on bookie
# server restart after failure.
# This config is used only when entryLogPerLedgerEnabled is enabled.
flushInterval=60000

# Allow the expansion of bookie storage capacity. Newly added ledger
# and index dirs must be empty.
# allowStorageExpansion=false

# Whether the bookie should use its hostname to register with the
# co-ordination service(eg: Zookeeper service).
# When false, bookie will use its ip address for the registration.
# Defaults to false.
useHostNameAsBookieID=false

# If you want to custom bookie ID or use a dynamic network address for the bookie,
# you can set this option.
# Bookie advertises itself using bookieId rather than
# BookieSocketAddress (hostname:port or IP:port).
# bookieId is a non empty string that can contain ASCII digits and letters ([a-zA-Z9-0]),
# colons, dashes, and dots.
# For more information about bookieId, see http://bookkeeper.apache.org/bps/BP-41-bookieid/.
# bookieId=

# Whether the bookie is allowed to use an ephemeral port (port 0) as its
# server port. By default, an ephemeral port is not allowed.
# Using an ephemeral port as the service port usually indicates a configuration
# error. However, in unit tests, using an ephemeral port will address port
# conflict problems and allow running tests in parallel.
# allowEphemeralPorts=false

# Whether allow the bookie to listen for BookKeeper clients executed on the local JVM.
# enableLocalTransport=false

# Whether allow the bookie to disable bind on network interfaces,
# this bookie will be available only to BookKeeper clients executed on the local JVM.
# disableServerSocketBind=false

# The number of bytes we should use as chunk allocation for
# org.apache.bookkeeper.bookie.SkipListArena
# skipListArenaChunkSize=4194304

# The max size we should allocate from the skiplist arena. Allocations
# larger than this should be allocated directly by the VM to avoid fragmentation.
# skipListArenaMaxAllocSize=131072

# The bookie authentication provider factory class name.
# If this is null, no authentication will take place.
# bookieAuthProviderFactoryClass=null

#############################################################################
## Garbage collection settings
#############################################################################

# How long the interval to trigger next garbage collection, in milliseconds
# Since garbage collection is running in background, too frequent gc
# will heart performance. It is better to give a higher number of gc
# interval if there is enough disk capacity.
gcWaitTime=900000

# How long the interval to trigger next garbage collection of overreplicated
# ledgers, in milliseconds [Default: 1 day]. This should not be run very frequently
# since we read the metadata for all the ledgers on the bookie from zk
gcOverreplicatedLedgerWaitTime=86400000

# Number of threads that should handle write requests. if zero, the writes would
# be handled by netty threads directly.
numAddWorkerThreads=0

# Number of threads that should handle read requests. if zero, the reads would
# be handled by netty threads directly.
numReadWorkerThreads=8

# Number of threads that should be used for high priority requests
# (i.e. recovery reads and adds, and fencing).
numHighPriorityWorkerThreads=8

# If read workers threads are enabled, limit the number of pending requests, to
# avoid the executor queue to grow indefinitely
maxPendingReadRequestsPerThread=2500

# If add workers threads are enabled, limit the number of pending requests, to
# avoid the executor queue to grow indefinitely
maxPendingAddRequestsPerThread=10000

# Use auto-throttling of the read-worker threads. This is done
# to ensure the bookie is not using unlimited amount of memory
# to respond to read-requests.
readWorkerThreadsThrottlingEnabled=true

# Option to enable busy-wait settings. Default is false.
# WARNING: This option will enable spin-waiting on executors and IO threads in order to reduce latency during
# context switches. The spinning will consume 100% CPU even when bookie is not doing any work. It is recommended to
# reduce the number of threads in the main workers pool and Netty event loop to only have few CPU cores busy.
enableBusyWait=false

# Whether force compaction is allowed when the disk is full or almost full.
# Forcing GC may get some space back, but may also fill up disk space more quickly.
# This is because new log files are created before GC, while old garbage
# log files are deleted after GC.
# isForceGCAllowWhenNoSpace=false

# True if the bookie should double check readMetadata prior to gc
# verifyMetadataOnGC=false

#############################################################################
## TLS settings
#############################################################################

# TLS Provider (JDK or OpenSSL).
# tlsProvider=OpenSSL

# The path to the class that provides security.
# tlsProviderFactoryClass=org.apache.bookkeeper.tls.TLSContextFactory

# Type of security used by server.
# tlsClientAuthentication=true

# Bookie Keystore type.
# tlsKeyStoreType=JKS

# Bookie Keystore location (path).
# tlsKeyStore=null

# Bookie Keystore password path, if the keystore is protected by a password.
# tlsKeyStorePasswordPath=null

# Bookie Truststore type.
# tlsTrustStoreType=null

# Bookie Truststore location (path).
# tlsTrustStore=null

# Bookie Truststore password path, if the trust store is protected by a password.
# tlsTrustStorePasswordPath=null

#############################################################################
## Long poll request parameter settings
#############################################################################

# The number of threads that should handle long poll requests.
# numLongPollWorkerThreads=10

# The tick duration in milliseconds for long poll requests.
# requestTimerTickDurationMs=10

# The number of ticks per wheel for the long poll request timer.
# requestTimerNumTicks=1024

#############################################################################
## AutoRecovery settings
#############################################################################

# The interval between auditor bookie checks.
# The auditor bookie check, checks ledger metadata to see which bookies should
# contain entries for each ledger. If a bookie which should contain entries is
# unavailable, then the ledger containing that entry is marked for recovery.
# Setting this to 0 disabled the periodic check. Bookie checks will still
# run when a bookie fails.
# The interval is specified in seconds.
auditorPeriodicBookieCheckInterval=86400

# The number of entries that a replication will rereplicate in parallel.
rereplicationEntryBatchSize=100

# Auto-replication
# The grace period, in milliseconds, that the replication worker waits before fencing and
# replicating a ledger fragment that's still being written to upon bookie failure.
openLedgerRereplicationGracePeriod=30000

# Whether the bookie itself can start auto-recovery service also or not
autoRecoveryDaemonEnabled=true

# How long to wait, in seconds, before starting auto recovery of a lost bookie
lostBookieRecoveryDelay=0

# Use older Bookkeeper wire protocol (Before Version 3) for AutoRecovery. Default is false
useV2WireProtocol=true

#############################################################################
## Placement settings
#############################################################################

# the following settings take effects when `autoRecoveryDaemonEnabled` is true.

# The ensemble placement policy used for re-replicating entries.
#
# Options:
#   - org.apache.bookkeeper.client.RackawareEnsemblePlacementPolicy
#   - org.apache.bookkeeper.client.RegionAwareEnsemblePlacementPolicy
#
# Default value:
#   org.apache.bookkeeper.client.RackawareEnsemblePlacementPolicy
#
# ensemblePlacementPolicy=org.apache.bookkeeper.client.RackawareEnsemblePlacementPolicy

#############################################################################
## Netty server settings
#############################################################################

# This settings is used to enabled/disabled Nagle's algorithm, which is a means of
# improving the efficiency of TCP/IP networks by reducing the number of packets
# that need to be sent over the network.
# If you are sending many small messages, such that more than one can fit in
# a single IP packet, setting server.tcpnodelay to false to enable Nagle algorithm
# can provide better performance.
# Default value is true.
serverTcpNoDelay=true

# This setting is used to send keep-alive messages on connection-oriented sockets.
# serverSockKeepalive=true

# The socket linger timeout on close.
# When enabled, a close or shutdown will not return until all queued messages for
# the socket have been successfully sent or the linger timeout has been reached.
# Otherwise, the call returns immediately and the closing is done in the background.
# serverTcpLinger=0

# The Recv ByteBuf allocator initial buf size.
# byteBufAllocatorSizeInitial=65536

# The Recv ByteBuf allocator min buf size.
# byteBufAllocatorSizeMin=65536

# The Recv ByteBuf allocator max buf size.
# byteBufAllocatorSizeMax=1048576

# The maximum netty frame size in bytes. Any message received larger than this will be rejected. The default value is 5MB.
nettyMaxFrameSizeBytes=5253120

#############################################################################
## Journal settings
#############################################################################

# The journal format version to write.
# Available formats are 1-6:
# 1: no header
# 2: a header section was added
# 3: ledger key was introduced
# 4: fencing key was introduced
# 5: expanding header to 512 and padding writes to align sector size configured by `journalAlignmentSize`
# 6: persisting explicitLac is introduced
# By default, it is `6`.
# If you'd like to disable persisting ExplicitLac, you can set this config to < `6` and also
# fileInfoFormatVersionToWrite should be set to 0. If there is mismatch then the serverconfig is considered invalid.
# You can disable `padding-writes` by setting journal version back to `4`. This feature is available in 4.5.0
# and onward versions.
journalFormatVersionToWrite=5

# Max file size of journal file, in mega bytes
# A new journal file will be created when the old one reaches the file size limitation
journalMaxSizeMB=2048

# Max number of old journal file to kept
# Keep a number of old journal files would help data recovery in special case
journalMaxBackups=5

# How much space should we pre-allocate at a time in the journal.
journalPreAllocSizeMB=16

# Size of the write buffers used for the journal
journalWriteBufferSizeKB=64

# Should we remove pages from page cache after force write
journalRemoveFromPageCache=true

# Should the data be written on journal.
# By default, data is written on journal for durability of writes.
# Beware: while disabling data journaling in the Bookie journal might improve the bookie write performance, it will also
# introduce the possibility of data loss. With no journal, the write operations are passed to the storage engine
# and then acknowledged. In case of power failure, the affected bookie might lose the unflushed data. If the ledger
# is replicated to multiple bookies, the chances of data loss are reduced though still present.
journalWriteData=true

# Should the data be fsynced on journal before acknowledgment.
# By default, data sync is enabled to guarantee durability of writes.
# Beware: while disabling data sync in the Bookie journal might improve the bookie write performance, it will also
# introduce the possibility of data loss. With no sync, the journal entries are written in the OS page cache but
# not flushed to disk. In case of power failure, the affected bookie might lose the unflushed data. If the ledger
# is replicated to multiple bookies, the chances of data loss are reduced though still present.
journalSyncData=true

# Should we group journal force writes, which optimize group commit
# for higher throughput
journalAdaptiveGroupWrites=true

# Maximum latency to impose on a journal write to achieve grouping
journalMaxGroupWaitMSec=1

# Maximum writes to buffer to achieve grouping
journalBufferedWritesThreshold=524288

# The number of threads that should handle journal callbacks
numJournalCallbackThreads=8

# All the journal writes and commits should be aligned to given size.
# If not, zeros will be padded to align to given size.
# It only takes effects when journalFormatVersionToWrite is set to 5
journalAlignmentSize=4096

# Maximum entries to buffer to impose on a journal write to achieve grouping.
# journalBufferedEntriesThreshold=0

# If we should flush the journal when journal queue is empty
journalFlushWhenQueueEmpty=false

#############################################################################
## Ledger storage settings
#############################################################################

# Ledger storage implementation class
ledgerStorageClass=org.apache.bookkeeper.bookie.storage.ldb.DbLedgerStorage

# Directory Bookkeeper outputs ledger snapshots
# could define multi directories to store snapshots, separated by ','
# For example:
# ledgerDirectories=/tmp/bk1-data,/tmp/bk2-data
#
# Ideally ledger dirs and journal dir are each in a different device,
# which reduce the contention between random i/o and sequential write.
# It is possible to run with a single disk, but performance will be significantly lower.
ledgerDirectories=data/bookkeeper/ledgers
# Directories to store index files. If not specified, will use ledgerDirectories to store.
# indexDirectories=data/bookkeeper/ledgers

# Interval at which the auditor will do a check of all ledgers in the cluster.
# By default this runs once a week. The interval is set in seconds.
# To disable the periodic check completely, set this to 0.
# Note that periodic checking will put extra load on the cluster, so it should
# not be run more frequently than once a day.
auditorPeriodicCheckInterval=604800

# Whether sorted-ledger storage enabled (default true)
# sortedLedgerStorageEnabled=true

# The skip list data size limitation (default 64MB) in EntryMemTable
# skipListSizeLimit=67108864L

#############################################################################
## Ledger cache settings
#############################################################################

# Max number of ledger index files could be opened in bookie server
# If number of ledger index files reaches this limitation, bookie
# server started to swap some ledgers from memory to disk.
# Too frequent swap will affect performance. You can tune this number
# to gain performance according your requirements.
openFileLimit=0

# The fileinfo format version to write.
#  Available formats are 0-1:
#   0: Initial version
#   1: persisting explicitLac is introduced
# By default, it is `1`.
# If you'd like to disable persisting ExplicitLac, you can set this config to 0 and
# also journalFormatVersionToWrite should be set to < 6. If there is mismatch then the
# serverconfig is considered invalid.
fileInfoFormatVersionToWrite=0

# Size of a index page in ledger cache, in bytes
# A larger index page can improve performance writing page to disk,
# which is efficient when you have small number of ledgers and these
# ledgers have similar number of entries.
# If you have large number of ledgers and each ledger has fewer entries,
# smaller index page would improve memory usage.
# pageSize=8192

# How many index pages provided in ledger cache
# If number of index pages reaches this limitation, bookie server
# starts to swap some ledgers from memory to disk. You can increment
# this value when you found swap became more frequent. But make sure
# pageLimit*pageSize should not more than JVM max memory limitation,
# otherwise you would got OutOfMemoryException.
# In general, incrementing pageLimit, using smaller index page would
# gain better performance in lager number of ledgers with fewer entries case
# If pageLimit is -1, bookie server will use 1/3 of JVM memory to compute
# the limitation of number of index pages.
pageLimit=0

#############################################################################
## Ledger manager settings
#############################################################################

# Ledger Manager Class
# What kind of ledger manager is used to manage how ledgers are stored, managed
# and garbage collected. Try to read 'BookKeeper Internals' for detail info.
# ledgerManagerFactoryClass=org.apache.bookkeeper.meta.HierarchicalLedgerManagerFactory

# @Deprecated - `ledgerManagerType` is deprecated in favor of using `ledgerManagerFactoryClass`.
# ledgerManagerType=hierarchical

# Root Zookeeper path to store ledger metadata
# This parameter is used by zookeeper-based ledger manager as a root znode to
# store all ledgers.
zkLedgersRootPath=/ledgers

#############################################################################
## Entry log settings
#############################################################################

# Max file size of entry logger, in bytes
# A new entry log file will be created when the old one reaches the file size limitation
logSizeLimit=1073741824

# Enable/Disable entry logger preallocation
entryLogFilePreallocationEnabled=true

# Entry log flush interval in bytes.
# Default is 0. 0 or less disables this feature and effectively flush
# happens on log rotation.
# Flushing in smaller chunks but more frequently reduces spikes in disk
# I/O. Flushing too frequently may also affect performance negatively.
flushEntrylogBytes=268435456

# The number of bytes we should use as capacity for BufferedReadChannel. Default is 512 bytes.
readBufferSizeBytes=4096

# The number of bytes used as capacity for the write buffer. Default is 64KB.
writeBufferSizeBytes=65536

# Specifies if entryLog per ledger is enabled/disabled. If it is enabled, then there would be a
# active entrylog for each ledger. It would be ideal to enable this feature if the underlying
# storage device has multiple DiskPartitions or SSD and if in a given moment, entries of fewer
# number of active ledgers are written to a bookie.
# entryLogPerLedgerEnabled=false

#############################################################################
## Entry log compaction settings
#############################################################################

# Set the rate at which compaction will readd entries. The unit is adds per second.
compactionRate=1000

# If bookie is using hostname for registration and in ledger metadata then
# whether to use short hostname or FQDN hostname. Defaults to false.
# useShortHostName=false

# Threshold of minor compaction
# For those entry log files whose remaining size percentage reaches below
# this threshold will be compacted in a minor compaction.
# If it is set to less than zero, the minor compaction is disabled.
minorCompactionThreshold=0.2

# Interval to run minor compaction, in seconds
# If it is set to less than zero, the minor compaction is disabled.
# Note: should be greater than gcWaitTime.
minorCompactionInterval=3600

# Set the maximum number of entries which can be compacted without flushing.
# When compacting, the entries are written to the entrylog and the new offsets
# are cached in memory. Once the entrylog is flushed the index is updated with
# the new offsets. This parameter controls the number of entries added to the
# entrylog before a flush is forced. A higher value for this parameter means
# more memory will be used for offsets. Each offset consists of 3 longs.
# This parameter should _not_ be modified unless you know what you're doing.
# The default is 100,000.
compactionMaxOutstandingRequests=100000

# Threshold of major compaction
# For those entry log files whose remaining size percentage reaches below
# this threshold will be compacted in a major compaction.
# Those entry log files whose remaining size percentage is still
# higher than the threshold will never be compacted.
# If it is set to less than zero, the minor compaction is disabled.
majorCompactionThreshold=0.5

# Interval to run major compaction, in seconds
# If it is set to less than zero, the major compaction is disabled.
# Note: should be greater than gcWaitTime.
majorCompactionInterval=86400

# Throttle compaction by bytes or by entries.
isThrottleByBytes=false

# Set the rate at which compaction will readd entries. The unit is adds per second.
compactionRateByEntries=1000

# Set the rate at which compaction will readd entries. The unit is bytes added per second.
compactionRateByBytes=1000000

#############################################################################
## Statistics
#############################################################################

# Whether statistics are enabled
# enableStatistics=true

# Stats Provider Class (if statistics are enabled)
statsProviderClass=org.apache.bookkeeper.stats.prometheus.PrometheusMetricsProvider

# Default port for Prometheus metrics exporter
prometheusStatsHttpPort=8000

#############################################################################
## Read-only mode support
#############################################################################

# If all ledger directories configured are full, then support only read requests for clients.
# If "readOnlyModeEnabled=true" then on all ledger disks full, bookie will be converted
# to read-only mode and serve only read requests. Otherwise the bookie will be shutdown.
# By default this will be disabled.
readOnlyModeEnabled=true

# Whether the bookie is force started in read only mode or not
# forceReadOnlyBookie=false

# Persist the bookie status locally on the disks. So the bookies can keep their status upon restarts
# @Since 4.6
# persistBookieStatusEnabled=false

#############################################################################
## Disk utilization
#############################################################################

# For each ledger dir, maximum disk space which can be used.
# Default is 0.95f. i.e. 95% of disk can be used at most after which nothing will
# be written to that partition. If all ledger dir partitions are full, then bookie
# will turn to readonly mode if 'readOnlyModeEnabled=true' is set, else it will
# shutdown.
# Valid values should be in between 0 and 1 (exclusive).
diskUsageThreshold=0.95

# The disk free space low water mark threshold.
# Disk is considered full when usage threshold is exceeded.
# Disk returns back to non-full state when usage is below low water mark threshold.
# This prevents it from going back and forth between these states frequently
# when concurrent writes and compaction are happening. This also prevent bookie from
# switching frequently between read-only and read-writes states in the same cases.
# diskUsageWarnThreshold=0.95

# Set the disk free space low water mark threshold. Disk is considered full when
# usage threshold is exceeded. Disk returns back to non-full state when usage is
# below low water mark threshold. This prevents it from going back and forth
# between these states frequently when concurrent writes and compaction are
# happening. This also prevent bookie from switching frequently between
# read-only and read-writes states in the same cases.
# diskUsageLwmThreshold=0.90

# Disk check interval in milli seconds, interval to check the ledger dirs usage.
# Default is 10000
diskCheckInterval=10000

#############################################################################
## ZooKeeper parameters
#############################################################################

# A list of one of more servers on which Zookeeper is running.
# The server list can be comma separated values, for example:
# zkServers=zk1:2181,zk2:2181,zk3:2181
zkServers=localhost:2181

# ZooKeeper client session timeout in milliseconds
# Bookie server will exit if it received SESSION_EXPIRED because it
# was partitioned off from ZooKeeper for more than the session timeout
# JVM garbage collection, disk I/O will cause SESSION_EXPIRED.
# Increment this value could help avoiding this issue
zkTimeout=30000

# The Zookeeper client backoff retry start time in millis.
# zkRetryBackoffStartMs=1000

# The Zookeeper client backoff retry max time in millis.
# zkRetryBackoffMaxMs=10000

# Set ACLs on every node written on ZooKeeper, this way only allowed users
# will be able to read and write BookKeeper metadata stored on ZooKeeper.
# In order to make ACLs work you need to setup ZooKeeper JAAS authentication
# all the bookies and Client need to share the same user, and this is usually
# done using Kerberos authentication. See ZooKeeper documentation
zkEnableSecurity=false

#############################################################################
## Server parameters
#############################################################################

# The flag enables/disables starting the admin http server. Default value is 'false'.
httpServerEnabled=false

# The http server port to listen on. Default value is 8080.
# Use `8000` as the port to keep it consistent with prometheus stats provider
httpServerPort=8000

# The http server class
httpServerClass=org.apache.bookkeeper.http.vertx.VertxHttpServer

# Configure a list of server components to enable and load on a bookie server.
# This provides the plugin run extra services along with a bookie server.
#
# extraServerComponents=


#############################################################################
## DB Ledger storage configuration
#############################################################################

# These configs are used when the selected 'ledgerStorageClass' is
# org.apache.bookkeeper.bookie.storage.ldb.DbLedgerStorage

# Size of Write Cache. Memory is allocated from JVM direct memory.
# Write cache is used to buffer entries before flushing into the entry log
# For good performance, it should be big enough to hold a substantial amount
# of entries in the flush interval
#  By default it will be allocated to 1/4th of the available direct memory
dbStorage_writeCacheMaxSizeMb=

# Size of Read cache. Memory is allocated from JVM direct memory.
# This read cache is pre-filled doing read-ahead whenever a cache miss happens
#  By default it will be allocated to 1/4th of the available direct memory
dbStorage_readAheadCacheMaxSizeMb=

# How many entries to pre-fill in cache after a read cache miss
dbStorage_readAheadCacheBatchSize=1000

## RocksDB specific configurations
## DbLedgerStorage uses RocksDB to store the indexes from
## (ledgerId, entryId) -> (entryLog, offset)

# Size of RocksDB block-cache. For best performance, this cache
# should be big enough to hold a significant portion of the index
# database which can reach ~2GB in some cases
# Default is to use 10% of the direct memory size
dbStorage_rocksDB_blockCacheSize=

# Other RocksDB specific tunables
dbStorage_rocksDB_writeBufferSizeMB=64
dbStorage_rocksDB_sstSizeInMB=64
dbStorage_rocksDB_blockSize=65536
dbStorage_rocksDB_bloomFilterBitsPerKey=10
dbStorage_rocksDB_numLevels=-1
dbStorage_rocksDB_numFilesInLevel0=4
dbStorage_rocksDB_maxSizeInLevel1MB=256