#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
#

### --- Broker Discovery --- ###
# The metadata store URL
# Examples:
# * zk:my-zk-1:2181,my-zk-2:2181,my-zk-3:2181
# * my-zk-1:2181,my-zk-2:2181,my-zk-3:2181 (will default to ZooKeeper when the schema is not specified)
# * zk:my-zk-1:2181,my-zk-2:2181,my-zk-3:2181/my-chroot-path (to add a ZK chroot path)
metadataStoreUrl=

# The metadata store URL for the configuration data. If empty, we fall back to use metadataStoreUrl
configurationMetadataStoreUrl=

# if Service Discovery is Disabled this url should point to the discovery service provider.
brokerServiceURL=
brokerServiceURLTLS=

# These settings are unnecessary if `zookeeperServers` is specified
brokerWebServiceURL=
brokerWebServiceURLTLS=

# If function workers are setup in a separate cluster, configure the following 2 settings
# to point to the function workers cluster
functionWorkerWebServiceURL=
functionWorkerWebServiceURLTLS=

# Metadata store session timeout in milliseconds
metadataStoreSessionTimeoutMillis=30000

# Metadata store cache expiry time in seconds
metadataStoreCacheExpirySeconds=300

### --- Server --- ###

# Hostname or IP address the service binds on, default is 0.0.0.0.
bindAddress=0.0.0.0

# Hostname or IP address the service advertises to the outside world.
# If not set, the value of `InetAddress.getLocalHost().getHostname()` is used.
advertisedAddress=

# Enable or disable the HAProxy protocol.
haProxyProtocolEnabled=false

# The port to use for server binary Protobuf requests
servicePort=6650

# The port to use to server binary Protobuf TLS requests
servicePortTls=

# Port that discovery service listen on
webServicePort=8080

# Port to use to server HTTPS request
webServicePortTls=

# Number of threads used for Netty IO. Default is set to `2 * Runtime.getRuntime().availableProcessors()`
numIOThreads=

# Number of threads used for Netty Acceptor. Default is set to `1`
numAcceptorThreads=

### --- TLS config variables --- ###
## Note that some of the above TLS configs also apply to the KeyStore TLS configuration.

# Specify the TLS provider for the broker service:
# When using TLS authentication with CACert, the valid value is either OPENSSL or JDK.
# When using TLS authentication with KeyStore, available values can be SunJSSE, Conscrypt and etc.
tlsProvider=

# Specify the TLS provider for the web service, available values can be SunJSSE, Conscrypt and etc.
webServiceTlsProvider=Conscrypt

# Enable TLS with KeyStore type configuration in proxy.
tlsEnabledWithKeyStore=false

# TLS KeyStore type configuration in proxy: JKS, PKCS12
tlsKeyStoreType=JKS

# TLS KeyStore path in proxy
tlsKeyStore=

# TLS KeyStore password for proxy
tlsKeyStorePassword=

# TLS TrustStore type configuration in proxy: JKS, PKCS12
tlsTrustStoreType=JKS

# TLS TrustStore path in proxy
tlsTrustStore=

# TLS TrustStore password in proxy, default value is empty password
tlsTrustStorePassword=

# Specify the tls protocols the proxy's web service will use to negotiate during TLS handshake
# (a comma-separated list of protocol names).
# Examples:- [TLSv1.3, TLSv1.2]
webServiceTlsProtocols=

# Specify the tls cipher the proxy will use to negotiate during TLS Handshake
# (a comma-separated list of ciphers).
# Examples:- [TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256]
webServiceTlsCiphers=

# Path for the file used to determine the rotation status for the proxy instance when responding
# to service discovery health checks
statusFilePath=

# Proxy log level, default is 0.
# 0: Do not log any tcp channel info
# 1: Parse and log any tcp channel info and command info without message body
# 2: Parse and log channel info, command info and message body
proxyLogLevel=0

### ---Authorization --- ###

# Role names that are treated as "super-users," meaning that they will be able to perform all admin
# operations and publish/consume to/from all topics (as a comma-separated list)
superUserRoles=

# Whether authorization is enforced by the Pulsar proxy
authorizationEnabled=false

# Authorization provider as a fully qualified class name
authorizationProvider=org.apache.pulsar.broker.authorization.PulsarAuthorizationProvider

# Whether client authorization credentials are forwared to the broker for re-authorization.
# Authentication must be enabled via authenticationEnabled=true for this to take effect.
forwardAuthorizationCredentials=false

### --- Authentication --- ###

# Whether authentication is enabled for the Pulsar proxy
authenticationEnabled=false

# Authentication provider name list (a comma-separated list of class names)
authenticationProviders=

# When this parameter is not empty, unauthenticated users perform as anonymousUserRole
anonymousUserRole=

### --- Client Authentication --- ###

# The three brokerClient* authentication settings below are for the proxy itself and determine how it
# authenticates with Pulsar brokers

# The authentication plugin used by the Pulsar proxy to authenticate with Pulsar brokers
brokerClientAuthenticationPlugin=

# The authentication parameters used by the Pulsar proxy to authenticate with Pulsar brokers
brokerClientAuthenticationParameters=

# The path to trusted certificates used by the Pulsar proxy to authenticate with Pulsar brokers
brokerClientTrustCertsFilePath=

# Whether TLS is enabled when communicating with Pulsar brokers
tlsEnabledWithBroker=false

# Tls cert refresh duration in seconds (set 0 to check on every new connection)
tlsCertRefreshCheckDurationSec=300

# You can add extra configuration options for the Pulsar Client
# by prefixing them with "brokerClient_". These configurations are applied after hard coded configuration
# and before the above brokerClient configurations named above.

##### --- Rate Limiting --- #####

# Max concurrent inbound connections. The proxy will reject requests beyond that.
maxConcurrentInboundConnections=10000

# Max concurrent outbound connections. The proxy will error out requests beyond that.
maxConcurrentLookupRequests=50000

##### --- TLS --- #####

# Deprecated - use servicePortTls and webServicePortTls instead
tlsEnabledInProxy=false

# Path for the TLS certificate file
tlsCertificateFilePath=

# Path for the TLS private key file
tlsKeyFilePath=

# Path for the trusted TLS certificate file.
# This cert is used to verify that any certs presented by connecting clients
# are signed by a certificate authority. If this verification
# fails, then the certs are untrusted and the connections are dropped.
tlsTrustCertsFilePath=

# Accept untrusted TLS certificate from client.
# If true, a client with a cert which cannot be verified with the
# 'tlsTrustCertsFilePath' cert will allowed to connect to the server,
# though the cert will not be used for client authentication.
tlsAllowInsecureConnection=false

# Whether the hostname is validated when the proxy creates a TLS connection with brokers
tlsHostnameVerificationEnabled=false

# Specify the tls protocols the broker will use to negotiate during TLS handshake
# (a comma-separated list of protocol names).
# Examples:- [TLSv1.3, TLSv1.2]
tlsProtocols=

# Specify the tls cipher the broker will use to negotiate during TLS Handshake
# (a comma-separated list of ciphers).
# Examples:- [TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256]
tlsCiphers=

# Whether client certificates are required for TLS. Connections are rejected if the client
# certificate isn't trusted.
tlsRequireTrustedClientCertOnConnect=false

##### --- HTTP --- #####

# Http directs to redirect to non-pulsar services.
httpReverseProxyConfigs=

# Http output buffer size. The amount of data that will be buffered for http requests
# before it is flushed to the channel. A larger buffer size may result in higher http throughput
# though it may take longer for the client to see data.
# If using HTTP streaming via the reverse proxy, this should be set to the minimum value, 1,
# so that clients see the data as soon as possible.
httpOutputBufferSize=32768

# Number of threads to use for HTTP requests processing. Default is
# 2 * Runtime.getRuntime().availableProcessors()
httpNumThreads=

# Enable the enforcement of limits on the incoming HTTP requests
httpRequestsLimitEnabled=false

# Max HTTP requests per seconds allowed. The excess of requests will be rejected with HTTP code 429 (Too many requests)
httpRequestsMaxPerSecond=100.0


## Configure the datasource of basic authenticate, supports the file and Base64 format.
# file:
# basicAuthConf=/path/my/.htpasswd
# use Base64 to encode the contents of .htpasswd:
# basicAuthConf=YOUR-BASE64-DATA
basicAuthConf=

### --- Token Authentication Provider --- ###

## Symmetric key
# Configure the secret key to be used to validate auth tokens
# The key can be specified like:
# tokenSecretKey=data:;base64,xxxxxxxxx
# tokenSecretKey=file:///my/secret.key    ( Note: key file must be DER-encoded )
tokenSecretKey=

## Asymmetric public/private key pair
# Configure the public key to be used to validate auth tokens
# The key can be specified like:
# tokenPublicKey=data:;base64,xxxxxxxxx
# tokenPublicKey=file:///my/public.key    ( Note: key file must be DER-encoded )
tokenPublicKey=

# The token "claim" that will be interpreted as the authentication "role" or "principal" by AuthenticationProviderToken (defaults to "sub" if blank)
tokenAuthClaim=

# The token audience "claim" name, e.g. "aud", that will be used to get the audience from token.
# If not set, audience will not be verified.
tokenAudienceClaim=

# The token audience stands for this broker. The field `tokenAudienceClaim` of a valid token, need contains this.
tokenAudience=

### --- WebSocket config variables --- ###

# Enable or disable the WebSocket servlet.
webSocketServiceEnabled=false

# Name of the cluster to which this broker belongs to
clusterName=


### --- Proxy Extensions

# List of proxy extensions to load, which is a list of extension names
#proxyExtensions=

# The directory to locate extensions
#proxyExtensionsDirectory=

### --- Deprecated config variables --- ###

# Deprecated. Use configurationStoreServers
globalZookeeperServers=

# The ZooKeeper quorum connection string (as a comma-separated list)
zookeeperServers=

# Configuration store connection string (as a comma-separated list)
configurationStoreServers=

# ZooKeeper session timeout (in milliseconds)
# Deprecated: use metadataStoreSessionTimeoutMillis
zookeeperSessionTimeoutMs=-1

# ZooKeeper cache expiry time in seconds
# Deprecated: use metadataStoreCacheExpirySeconds
zooKeeperCacheExpirySeconds=-1