#!/usr/bin/env bash
#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
#

BINDIR=$(dirname "$0")
PULSAR_HOME=`cd -P $BINDIR/..;pwd`

# log directory
PULSAR_LOG_DIR=${PULSAR_LOG_DIR:-"$PULSAR_HOME/logs"}

DEFAULT_CLIENT_CONF=${PULSAR_CLIENT_CONF:-"$PULSAR_HOME/conf/client.conf"}
DEFAULT_LOG_CONF=$PULSAR_HOME/conf/log4j2.yaml

# Check bookkeeper env and load bkenv.sh
if [ -f "$PULSAR_HOME/conf/bkenv.sh" ]
then
    . "$PULSAR_HOME/conf/bkenv.sh"
fi

if [ -f "$PULSAR_HOME/conf/pulsar_env.sh" ]
then
    . "$PULSAR_HOME/conf/pulsar_env.sh"
fi

# Check for the java to use
if [[ -z $JAVA_HOME ]]; then
    JAVA=$(which java)
    if [ $? != 0 ]; then
        echo "Error: JAVA_HOME not set, and no java executable found in $PATH." 1>&2
        exit 1
    fi
else
    JAVA=$JAVA_HOME/bin/java
fi

# exclude tests jar
RELEASE_JAR=`ls $PULSAR_HOME/pulsar-*.jar 2> /dev/null | grep -v tests | tail -1`
if [ $? == 0 ]; then
    PULSAR_JAR=$RELEASE_JAR
fi

# exclude tests jar
BUILT_JAR=`ls $PULSAR_HOME/pulsar-testclient/target/pulsar-*.jar 2> /dev/null | grep -v tests | tail -1`
if [ $? != 0 ] && [ ! -e "$PULSAR_JAR" ]; then
    echo "\nCouldn't find pulsar jar.";
    echo "Make sure you've run 'mvn package'\n";
    exit 1;
elif [ -e "$BUILT_JAR" ]; then
    PULSAR_JAR=$BUILT_JAR
fi

add_maven_deps_to_classpath() {
    MVN="mvn"
    if [ "$MAVEN_HOME" != "" ]; then
	MVN=${MAVEN_HOME}/bin/mvn
    fi

    # Need to generate classpath from maven pom. This is costly so generate it
    # and cache it. Save the file into our target dir so a mvn clean will get
    # clean it up and force us create a new one.
    f="${PULSAR_HOME}/distribution/server/target/classpath.txt"
    if [ ! -f "${f}" ]
    then
    (
      cd "${PULSAR_HOME}"
      ${MVN} -pl distribution/server generate-sources &> /dev/null
    )
    fi
    PULSAR_CLASSPATH=${CLASSPATH}:`cat "${f}"`
}
pulsar_help() {
    cat <<EOF
Usage: pulsar-perf <command>
where command is one of:
    produce                 Run a producer
    consume                 Run a consumer
    transaction             Run a transaction repeatedly
    read                    Run a topic reader

    websocket-producer      Run a websocket producer

    managed-ledger          Write directly on managed-ledgers
    monitor-brokers         Continuously receive broker data and/or load reports
    simulation-client       Run a simulation server acting as a Pulsar client
    simulation-controller   Run a simulation controller to give commands to servers

    gen-doc                 Generate documentation automatically.

    help                    This help message

or command is the full name of a class with a defined main() method.

Environment variables:
   PULSAR_LOG_CONF               Log4j configuration file (default $DEFAULT_LOG_CONF)
   PULSAR_CLIENT_CONF            Configuration file for client (default: $DEFAULT_CLIENT_CONF)
   PULSAR_EXTRA_OPTS             Extra options to be passed to the jvm
   PULSAR_EXTRA_CLASSPATH        Add extra paths to the pulsar classpath

These variable can also be set in conf/pulsar_env.sh
EOF
}

if [ -d "$PULSAR_HOME/lib" ]; then
	PULSAR_CLASSPATH="$PULSAR_CLASSPATH:$PULSAR_HOME/lib/*"
else
    add_maven_deps_to_classpath
fi

if [ -z "$PULSAR_PERFTEST_CONF" ]; then
    PULSAR_PERFTEST_CONF=$DEFAULT_CLIENT_CONF
fi

if [ -z "$PULSAR_LOG_CONF" ]; then
    PULSAR_LOG_CONF=$DEFAULT_LOG_CONF
fi

PULSAR_CLASSPATH="$PULSAR_JAR:$PULSAR_CLASSPATH:$PULSAR_EXTRA_CLASSPATH"
PULSAR_CLASSPATH="`dirname $PULSAR_LOG_CONF`:$PULSAR_CLASSPATH"
OPTS="$OPTS -Dlog4j.configurationFile=`basename $PULSAR_LOG_CONF` -Djava.net.preferIPv4Stack=true"

IS_JAVA_8=$( $JAVA -version 2>&1 | grep version | grep '"1\.8' )
# Start --add-opens options
# '--add-opens' option is not supported in jdk8
if [[ -z "$IS_JAVA_8" ]]; then
  OPTS="$OPTS --add-opens java.base/sun.net=ALL-UNNAMED --add-opens java.base/java.lang=ALL-UNNAMED"
fi

OPTS="-cp $PULSAR_CLASSPATH $OPTS"
OPTS="$OPTS $PULSAR_EXTRA_OPTS"

# log directory & file
PULSAR_LOG_APPENDER=${PULSAR_LOG_APPENDER:-"Console"}
PULSAR_LOG_FILE=${PULSAR_LOG_FILE:-"pulsar-perftest.log"}
PULSAR_LOG_LEVEL=${PULSAR_LOG_LEVEL:-"info"}
PULSAR_LOG_ROOT_LEVEL=${PULSAR_LOG_ROOT_LEVEL:-"${PULSAR_LOG_LEVEL}"}
PULSAR_LOG_IMMEDIATE_FLUSH="${PULSAR_LOG_IMMEDIATE_FLUSH:-"false"}"

#Configure log configuration system properties
OPTS="$OPTS -Dpulsar.log.appender=$PULSAR_LOG_APPENDER"
OPTS="$OPTS -Dpulsar.log.level=$PULSAR_LOG_LEVEL"
OPTS="$OPTS -Dpulsar.log.root.level=$PULSAR_LOG_ROOT_LEVEL"
OPTS="$OPTS -Dpulsar.log.immediateFlush=$PULSAR_LOG_IMMEDIATE_FLUSH"
OPTS="$OPTS -Dpulsar.log.dir=$PULSAR_LOG_DIR"
OPTS="$OPTS -Dpulsar.log.file=$PULSAR_LOG_FILE"

#Change to PULSAR_HOME to support relative paths
cd "$PULSAR_HOME"

# if no args specified, show usage
if [ $# = 0 ]; then
    pulsar_help;
    exit 1;
fi

# get arguments
COMMAND=$1
shift

if [ "$COMMAND" == "produce" ]; then
    exec $JAVA $OPTS org.apache.pulsar.testclient.PerformanceProducer --conf-file $PULSAR_PERFTEST_CONF "$@"
elif [ "$COMMAND" == "consume" ]; then
    exec $JAVA $OPTS org.apache.pulsar.testclient.PerformanceConsumer --conf-file $PULSAR_PERFTEST_CONF "$@"
elif [  "$COMMAND" == "transaction" ]; then
    exec $JAVA $OPTS org.apache.pulsar.testclient.PerformanceTransaction --conf-file $PULSAR_PERFTEST_CONF "$@"
elif [ "$COMMAND" == "read" ]; then
    exec $JAVA $OPTS org.apache.pulsar.testclient.PerformanceReader --conf-file $PULSAR_PERFTEST_CONF "$@"
elif [ "$COMMAND" == "monitor-brokers" ]; then
    exec $JAVA $OPTS org.apache.pulsar.testclient.BrokerMonitor "$@"
elif [ "$COMMAND" == "simulation-client" ]; then
    exec $JAVA $OPTS org.apache.pulsar.testclient.LoadSimulationClient "$@"
elif [ "$COMMAND" == "simulation-controller" ]; then
    exec $JAVA $OPTS org.apache.pulsar.testclient.LoadSimulationController "$@"
elif [ "$COMMAND" == "websocket-producer" ]; then
    exec $JAVA $OPTS org.apache.pulsar.proxy.socket.client.PerformanceClient "$@"
elif [ "$COMMAND" == "managed-ledger" ]; then
    exec $JAVA $OPTS org.apache.pulsar.testclient.ManagedLedgerWriter "$@"
elif [ "$COMMAND" == "gen-doc" ]; then
    exec $JAVA $OPTS org.apache.pulsar.testclient.CmdGenerateDocumentation "$@"
else
    pulsar_help;
fi