///////////////////////////////////////////////////////////////
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
///////////////////////////////////////////////////////////////

[[build-system,Build System]]
= Build System =

This tutorial is intended for developpers who want to build the Zest™ SDK themselves.
It describe the Zest™ SDK Build System from compilation to publication of artifacts for consumption by other
applications.

If instead you want to setup your project build system to depend on modules of the Zest™ SDK see the
<<howto-depend-on-zest,dedicated tutorial>>.


== Gradle ==

NOTE: All major Java IDEs have great Gradle support.
Visit the http://www.gradle.org/tooling[Gradle Tooling] page to learn how to import the Zest™ SDK build into your
favorite IDE.

Zest™ community migrated away from Maven after several years of frustration, especially around release management,
versioning and cross-module dependency resolution issues, in Feb 2011.
The tool of choice is now Gradle, and it doesn't require any installation, there are +gradlew+ and +gradlew.bat+ in
the root folder of the Zest™ SDK that will bootstrap Gradle if not done so already.

If you are new to Gradle, you should keep the http://www.gradle.org/documentation[documentation] at hands.

Build System configuration is done through Gradle properties.
This can be done in many ways, see
http://gradle.org/docs/current/userguide/tutorial_this_and_that.html#sec:gradle_properties_and_system_properties[Gradle properties and system properties].


== Root project tasks ==

The Zest™ SDK root project has tasks that work with the whole SDK.
The default build, triggered when running gradle without any command line arguments, compiles the code and run the
tests, but nothing else.
A quick way to check that nothing broke.

Here are some of theses global tasks we defined:

goOffline::
+
--
Resolve, download and cache all needed dependencies.
Useful to go offline.
--

clean::
+
--
Clean up of all build output and restore the code base to a fresh state.
--

check::
+
--
Run the tests and other checks like checkstyle.
Reports are generated in +build/reports+.
--

install::
+
--
Is roughly the same as Maven's install goal.
It produces the test reports, javadocs and installs all the Jars into the local disk repository, for consumption
by other applications.
--

buildAll::
+
--
Produces all the archives, javadocs, manuals and website content.
The output is generated to +build+.
--

release::
+
--
Uploads the release artifacts to the distribution servers and creates the release output into the
+build/distributions+ directory.
--


== Submodules tasks ==

In addition to that, some submodules have specific tasks.
To see all available tasks on a submodule issue the following command:

[source,bash]
----
./gradlew -p tests/performance tasks
----

This example will output all gradle tasks available in the +tests/performance+ module where you should find
the +testPerf+ task that run the Zest™ performance test suite.


== Versions ==

By default, the build system produces a "zero build".
It means that there is no version assigned to the build, and a "0" is used in the produced artifacts.
This is due to our disagreement (with Maven community) that the "next" version name/number is known prior to
the release.
This is in our opinion a delayed decision.
To build a particular version, you specify a +version+ property on the command-line, like

[source,bash]
-----------
./gradlew -Dversion=2.0-FLAVOUR install
-----------

If a +version+ property is not defined, the build system will refuse to make a release and upload.


== Tests ==

NOTE: See the https://builds.apache.org/view/S-Z/view/Zest/[Zest™ Continuous Integration] for current tests results

// TODO

=== Regression tests ===

They are not part of the default build.

// TODO


=== Performance tests ===

Performance tests provide performance mesurements for typical Zest™ use cases.
They are not part of the default build.

// TODO


=== Complex tests ===

Complex tests are the ones that requires manual operation to be executed.
They are not part of the default build.

// TODO


=== Unit tests requiring external services ===

NOTE: The HTML test reports generated by Gradle show skipped tests.

Among unit tests, some require an external service to be run.
For example, the MongoDB EntityStore extension requires an actual MongoDB server to run its tests.

All thoses tests should be part of the default build and check if the service is available at its default location
on +localhost+ and skip if not.
This is easily achieved using http://junit.sourceforge.net/javadoc/org/junit/Assume.html[JUnit assumptions].

We'll list here services that the unit tests will use if available.

- Memcached, ASCII protocol, no authentication on +localhost:4444+ for +extensions/cache-memcache+
- MongoDB without authentication on +localhost:27017+ for +extensions/entitystore-mongodb+
- Riak without authentication on +localhost:4444+ for +extensions/entitystore-riak+
- Redis without authentication on +localhost:4444+ for +extensions/entitystore-redis+
- PostgreSQL for +extensions/entitystore-sql+ and +extensions/indexing-sql+ (need setup, see test source)
- MySQL for +extensions/entitystore-sql+ (need setup, see test source)


== Releasing the Zest™ SDK ==

IMPORTANT: Remember that if a +version+ property is not defined, the build system will refuse to make a release and upload.

The Zest™ SDK build system is setup for an easy release process.
This is very useful to the Zest™ Core Team but can also be useful to third parties that want to cut a in-house release.
In this regard, we try to make every aspect of the release process usable for such cases.

The following sections describe various aspects of the release process.
By default you need to have a proper PGP setup, see below.


=== Release Criteria ===

The Zest™ SDK modules are of varying maturity level and we try to maintain a STATUS (+dev-status.xml+) file indicating
how good the codebase, documentation and unit tests are for each of the modules. This is highly subjective and
potentially different individuals will judge this differently, but at least it gives a ballpark idea of the situation
for our users.

The Zest™ SDK build system use the values from the +dev-status.xml+ files to filter out non-releasable modules out for
the +javadocs+ and +uploadArchives+ root project tasks.
Moreover, the +release+ task ensure that no releasable module depends on module(s) that don't fit the release criteria
and throw a detailed exception if need be.

This can be relaxed by adding +-x checkReleaseSpec+ arguments to gradle invocation.


=== Signing ===

Artifact signing is done using PGP.
You need to provide Gradle the following properties

    signing.keyId=FB751943
    signing.password=foobar
    signing.secretKeyRingFile=/home/foo/.gnupg/secring.gpg

You can skip the signing process by adding +-x signArchives+ arguments to gradle invocation.


=== Artifact Upload ===

Artifact upload behavior depends on the version assigned to the build.

By default RELEASES are signed, SNAPSHOTS are not.
Signing can be turned on or off by setting the `uploadSigned` property to false.

By default RELEASES must satisfy ReleaseSpecification, SNAPSHOT don't.
ReleaseSpecification usage can be turned on or off by setting the `uploadReleaseSpec` property to false.

By default RELEASES and SNAPHOTS are uploaded using HTTP.
Used Wagon can be overriden by setting the `uploadWagon` property.

By default RELEASES and SNAPSHOTS are uploaded to the Apache Nexus.
Target repository can be overriden by setting the `uploadRepository` property.

No username/password is provided by default.
If needed set them using the `uploadUsername` and `uploadPassword` properties.

For example here is how to deploy all artifacts as unsigned SNAPSHOTs to a given repository:

[source,bash]
-----------
./gradlew uploadArchives -Dversion=2.0-SNAPSHOT -PuploadReleaseSpec=false \
    -PuploadWagon=what:ever:wagon -PuploadRepository=http://what.ever.repository/url \
    -PuploadUsername=foo -PuploadPassword=bar
-----------

And here is how to deploy a signed release to the local filesystem:

[source,bash]
-----------
./gradlew uploadArchives -Dversion=2.0 -PuploadRepository=file:///path/to/local/repository
-----------

See the http://www.gradle.org/docs/current/userguide/maven_plugin.html#wagonLibs[Gradle documentation] about
supported protocols.