If you want to deploy OpenWhisk locally using Ansible, you first need to install Ansible on your development environment:
sudo apt-get install python-pip sudo pip install ansible==2.5.2 sudo pip install jinja2==2.9.6
sudo easy_install pip sudo pip install ansible==2.5.2 pip install jinja2==2.9.6
Docker for Mac does not provide any official ways to meet some requirements for OpenWhisk. You need to depend on the workarounds until Docker provides official methods.
If you prefer Docker-machine to Docker for mac, you can follow instructions in docker-machine/README.md.
The remote Docker API is required for collecting logs using the Ansible playbook logs.yml.
This is an optional step for local deployment. The OpenWhisk deployment via Ansible uses the docker0
network interface to deploy OpenWhisk and it does not exist on Docker for Mac environment.
An expedient workaround is to add alias for docker0
network to loopback interface.
sudo ifconfig lo0 alias 172.17.0.1/24
Caveat: All Ansible commands are meant to be executed from the ansible
directory. This is important because that's where ansible.cfg
is located which contains generic settings that are needed for the remaining steps.
Set the environment for the commands below by running
ENVIRONMENT=local # or docker-machine or jenkins or vagrant
The default environment is local
which works for Ubuntu and Docker for Mac. To use the default environment, you may omit the -i
parameter entirely. For older Mac installation using Docker Machine, use -i environments/docker-machine
.
In all instructions, replace <openwhisk_home>
with the base directory of your OpenWhisk source tree. e.g. openwhisk
When using the local Ansible environment, configuration and log data is stored in /tmp
by default. However, operating system such as Linux and Mac clean the /tmp
directory on reboot, resulting in failures when OpenWhisk tries to start up again. To avoid this problem, export the OPENWHISK_TMP_DIR
variable assigning it the path to a persistent directory before deploying OpenWhisk.
The following step must be executed once per development environment. It will generate the hosts
configuration file based on your environment settings.
The default configuration does not run multiple instances of core components (e.g., controller, invoker, kafka). You may elect to enable high-availability (HA) mode by passing tne Ansible option -e mode=HA
when executing this playbook. This will configure your deployment with multiple instances (e.g., two Kafka instances, and two invokers).
In addition to the host file generation, you need to configure the database for your deployment. This is done by modifying the file ansible/db_local.ini
to provide the following properties.
[db_creds] db_provider= db_username= db_password= db_protocol= db_host= db_port=
This file is generated automatically for an ephemeral CouchDB instance during setup.yml
. If you want to use Cloudant, you have to modify the file. For convenience, you can use shell environment variables that are read by the playbook to generate the required db_local.ini
file as shown below.
export OW_DB=CouchDB export OW_DB_USERNAME=<your couchdb user> export OW_DB_PASSWORD=<your couchdb password> export OW_DB_PROTOCOL=<your couchdb protocol> export OW_DB_HOST=<your couchdb host> export OW_DB_PORT=<your couchdb port> ansible-playbook -i environments/$ENVIRONMENT setup.yml
Alternatively, if you want to use Cloudant as your datastore:
export OW_DB=Cloudant export OW_DB_USERNAME=<your cloudant user> export OW_DB_PASSWORD=<your cloudant password> export OW_DB_PROTOCOL=https export OW_DB_HOST=<your cloudant user>.cloudant.com export OW_DB_PORT=443 ansible-playbook -i environments/$ENVIRONMENT setup.yml
This step is not required for local environments since all prerequisites are already installed, and therefore may be skipped.`
This step needs to be done only once per target environment. It will install necessary prerequisites on all target hosts in the environment.
ansible-playbook -i environments/$ENVIRONMENT prereq.yml
Hint: During playbook execution the TASK [prereq : check for pip]
can show as failed. This is normal if no pip is installed. The playbook will then move on and install pip on the target machines.
db_local.ini
file is setup for CouchDB then execute:cd <openwhisk_home> ./gradlew distDocker cd ansible ansible-playbook -i couchdb.yml ansible-playbook -i environments/$ENVIRONMENT initdb.yml ansible-playbook -i environments/$ENVIRONMENT wipe.yml ansible-playbook -i environments/$ENVIRONMENT openwhisk.yml # installs a catalog of public packages and actions ansible-playbook -i environments/$ENVIRONMENT postdeploy.yml # to use the API gateway ansible-playbook -i environments/$ENVIRONMENT apigateway.yml ansible-playbook -i environments/$ENVIRONMENT routemgmt.yml
initdb.yml
every time you do a fresh deploy CouchDB to initialize the subjects database.wipe.yml
playbook should be run on a fresh deployment only, otherwise actions and activations will be lost.postdeploy.yml
after deployment to install a catalog of useful packages.apigateway.yml
and routemgmt.yml
.ansible-playbook -i environments/$ENVIRONMENT openwhisk.yml
to avoid wiping the data store. This is useful to start OpenWhisk after restarting your Operating System.You cannot run multiple CouchDB nodes on a single machine. This limitation comes from Erlang EPMD which CouchDB relies on to find other nodes. To deploy multiple CouchDB nodes, they should be placed on different machines respectively otherwise their ports will clash.
db_local.ini
file is set up for Cloudant. See Setup.cd <openwhisk_home> ./gradlew distDocker cd ansible ansible-playbook -i environments/$ENVIRONMENT initdb.yml ansible-playbook -i environments/$ENVIRONMENT wipe.yml ansible-playbook -i environments/$ENVIRONMENT apigateway.yml ansible-playbook -i environments/$ENVIRONMENT openwhisk.yml # installs a catalog of public packages and actions ansible-playbook -i environments/$ENVIRONMENT postdeploy.yml # to use the API gateway ansible-playbook -i environments/$ENVIRONMENT apigateway.yml ansible-playbook -i environments/$ENVIRONMENT routemgmt.yml
initdb
on Cloudant only once per Cloudant database to initialize the subjects database.initdb.yml
playbook will only initialize your database if it is not initialized already, else it will skip initialization steps.wipe.yml
playbook should be run on a fresh deployment only, otherwise actions and activations will be lost.postdeploy.yml
after deployment to install a catalog of useful packages.apigateway.yml
and routemgmt.yml
.ansible-playbook -i environments/$ENVIRONMENT openwhisk.yml
to avoid wiping the data store. This is useful to start OpenWhisk after restarting your Operating System.You can use ElasticSearch (ES) to store activations separately while other entities remain stored in CouchDB. There is an Ansible playbook to setup a simple ES cluster for testing and development purposes.
elastic_protocol="http" elastic_index_pattern="openwhisk-%s" // this will be combined with namespace's name, so different namespace can use different index elastic_base_volume="esdata" // name of docker volume to store ES data elastic_cluster_name="openwhisk" elastic_java_opts="-Xms1g -Xmx1g" elastic_loglevel="INFO" elastic_username="admin" elastic_password="admin" elasticsearch_connect_string="x.x.x.x:9200,y.y.y.y:9200" // if you want to use an external ES cluster, add it
cd <openwhisk_home> ./gradlew distDocker cd ansible # couchdb is still needed to store subjects and actions ansible-playbook -i environments/$ENVIRONMENT couchdb.yml ansible-playbook -i environments/$ENVIRONMENT initdb.yml ansible-playbook -i environments/$ENVIRONMENT wipe.yml # this will deploy a simple ES cluster, you can skip this to use external ES cluster ansible-playbook -i environments/$ENVIRONMENT elasticsearch.yml ansible-playbook -i environments/$ENVIRONMENT openwhisk.yml -e db_activation_backend=ElasticSearch # installs a catalog of public packages and actions ansible-playbook -i environments/$ENVIRONMENT postdeploy.yml # to use the API gateway ansible-playbook -i environments/$ENVIRONMENT apigateway.yml ansible-playbook -i environments/$ENVIRONMENT routemgmt.yml
wsk
CLIThere are two installation modes to install wsk
CLI: remote and local.
The mode “remote” means to download the wsk
binaries from available web links. By default, OpenWhisk sets the installation mode to remote and downloads the binaries from the CLI release page, where OpenWhisk publishes the official wsk
binaries.
The mode “local” means to build and install the wsk
binaries from local CLI project. You can download the source code of OpenWhisk CLI here. Let‘s assume your OpenWhisk CLI home directory is $OPENWHISK_HOME/../openwhisk-cli
and you’ve already export
ed OPENWHISK_HOME
to be the root directory of this project. After you download the CLI repository, use the gradle command to build the binaries (you can omit the -PnativeBuild
if you want to cross-compile for all supported platforms):
cd "$OPENWHISK_HOME/../openwhisk-cli" ./gradlew releaseBinaries -PnativeBuild
The binaries are generated and put into a tarball in the folder ../openwhisk-cli/release
. Then, use the following Ansible command to (re-)configure the CLI installation:
export OPENWHISK_ENVIRONMENT=local # ... or whatever ansible-playbook -i environments/$OPENWHISK_ENVIRONMENT edge.yml -e mode=clean ansible-playbook -i environments/$OPENWHISK_ENVIRONMENT edge.yml \ -e cli_installation_mode=local \ -e openwhisk_cli_home="$OPENWHISK_HOME/../openwhisk-cli"
The parameter cli_installation_mode
specifies the CLI installation mode and the parameter openwhisk_cli_home
specifies the home directory of your local OpenWhisk CLI. (n.b. openwhisk_cli_home
defaults to $OPENWHISK_HOME/../openwhisk-cli
.)
Once the CLI is installed, you can use it to work with Whisk.
The playbook structure allows you to clean, deploy or re-deploy a single component as well as the entire OpenWhisk stack. Let's assume you have deployed the entire stack using the openwhisk.yml
playbook. You then make a change to a single component, for example the invoker. You will probably want a new tag on the invoker image so you first build it using:
cd <openwhisk_home> gradle :core:invoker:distDocker -PdockerImageTag=myNewInvoker
Then all you need to do is re-deploy the invoker using the new image:
cd ansible ansible-playbook -i environments/$ENVIRONMENT invoker.yml -e docker_image_tag=myNewInvoker
Hint: You can omit the Docker image tag parameters in which case latest
will be used implicitly.
You can remove a single component just as you would remove the entire deployment stack. For example, if you wanted to remove only the controller you would run:
cd ansible ansible-playbook -i environments/$ENVIRONMENT controller.yml -e mode=clean
Caveat: In distributed environments some components (e.g. Invoker, etc.) exist on multiple machines. So if you run a playbook to clean or deploy those components, it will run on all of the hosts targeted by the component's playbook.
Once you are done with the deployment you can clean it from the target environment.
ansible-playbook -i environments/$ENVIRONMENT openwhisk.yml -e mode=clean
This is usually not necessary, however in case you want to uninstall all prereqs from a target environment, execute:
ansible-playbook -i environments/$ENVIRONMENT prereq.yml -e mode=clean
To have a lean setup (no Kafka, Zookeeper and no Invokers as separate entities):
At Deploying Using CouchDB step, replace:
ansible-playbook -i environments/$ENVIRONMENT openwhisk.yml
by:
ansible-playbook -i environments/$ENVIRONMENT openwhisk.yml -e lean=true
Some of the more common problems and their solution are listed here.
If you encounter the following error message during ansible
execution
ERROR! Unexpected Exception: ... Requirement.parse('setuptools>=11.3'))
your setuptools
package is likely out of date. You can upgrade the package using this command:
pip install --upgrade setuptools --user python
The MacOS environment assumes Python is installed in /usr/local/bin
which is the default location when using brew
. The following error will occur if Python is located elsewhere:
ansible all -i environments/mac -m ping ansible | FAILED! => { "changed": false, "failed": true, "module_stderr": "/bin/sh: /usr/local/bin/python: No such file or directory\n", "module_stdout": "", "msg": "MODULE FAILURE", "parsed": false }
An expedient workaround is to create a link to the expected location:
ln -s $(which python) /usr/local/bin/python
Alternatively, you can also configure the location of Python interpreter in environments/<environment>/group_vars
.
ansible_python_interpreter: "/usr/local/bin/python"
After brew install ansible
, the following lines are printed out:
==> Caveats If you need Python to find the installed site-packages: mkdir -p ~/Library/Python/2.7/lib/python/site-packages echo '/usr/local/lib/python2.7/site-packages' > ~/Library/Python/2.7/lib/python/site-packages/homebrew.pth
Just run the two commands to fix this issue.
Ansible 2.1.0.0 and earlier versions do not support a space in file paths. Many file imports and roles will not work correctly when included from a path that contains spaces. If you encounter this error message during Ansible execution
fatal: [ansible]: FAILED! => {"failed": true, "msg": "need more than 1 value to unpack"}
the path to your OpenWhisk ansible
directory contains spaces. To fix this, please copy the source tree to a path without spaces as there is no current fix available to this problem.
The default system throttling limits are configured in this file ./group_vars/all and may be changed by modifying the group_vars for your specific environment.
limits: invocationsPerMinute: "{{ limit_invocations_per_minute | default(60) }}" concurrentInvocations: "{{ limit_invocations_concurrent | default(30) }}" firesPerMinute: "{{ limit_fires_per_minute | default(60) }}" sequenceMaxLength: "{{ limit_sequence_max_length | default(50) }}"
limits.invocationsPerMinute
represents the allowed namespace action invocations per minute.limits.concurrentInvocations
represents the maximum concurrent invocations allowed per namespace.limits.firesPerMinute
represents the allowed namespace trigger firings per minute.limits.sequenceMaxLength
represents the maximum length of a sequence action.The default timezone for all system containers is UTC. The timezone may differ from your servers which could make it difficult to inspect logs. The timezone is configured globally in group_vars/all or by passing an extra variable -e docker_timezone=xxx
when you run an ansible-playbook.