| #!/bin/sh |
| |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # |
| # This script is forked from Apache Tomcat |
| # |
| |
| # OS specific support. $var _must_ be set to either true or false. |
| cygwin=false |
| darwin=false |
| os400=false |
| hpux=false |
| case "`uname`" in |
| CYGWIN*) cygwin=true;; |
| Darwin*) darwin=true;; |
| OS400*) os400=true;; |
| HP-UX*) hpux=true;; |
| esac |
| |
| # resolve links - $0 may be a softlink |
| PRG="$0" |
| |
| while [ -h "$PRG" ]; do |
| ls=`ls -ld "$PRG"` |
| link=`expr "$ls" : '.*-> \(.*\)$'` |
| if expr "$link" : '/.*' > /dev/null; then |
| PRG="$link" |
| else |
| PRG=`dirname "$PRG"`/"$link" |
| fi |
| done |
| |
| # Get standard environment variables |
| PRGDIR=`dirname "$PRG"` |
| |
| # Only set MEECROWAVE_HOME if not already set |
| [ -z "$MEECROWAVE_HOME" ] && MEECROWAVE_HOME=`cd "$PRGDIR/.." >/dev/null; pwd` |
| |
| # Copy MEECROWAVE_BASE from MEECROWAVE_HOME if not already set |
| [ -z "$MEECROWAVE_BASE" ] && MEECROWAVE_BASE="$MEECROWAVE_HOME" |
| |
| # Ensure that any user defined CLASSPATH variables are not used on startup, |
| # but allow them to be specified in setenv.sh, in rare case when it is needed. |
| CLASSPATH= |
| |
| if [ -r "$MEECROWAVE_BASE/bin/setenv.sh" ]; then |
| . "$MEECROWAVE_BASE/bin/setenv.sh" |
| elif [ -r "$MEECROWAVE_HOME/bin/setenv.sh" ]; then |
| . "$MEECROWAVE_HOME/bin/setenv.sh" |
| fi |
| |
| # For Cygwin, ensure paths are in UNIX format before anything is touched |
| if $cygwin; then |
| [ -n "$JAVA_HOME" ] && JAVA_HOME=`cygpath --unix "$JAVA_HOME"` |
| [ -n "$JRE_HOME" ] && JRE_HOME=`cygpath --unix "$JRE_HOME"` |
| [ -n "$MEECROWAVE_HOME" ] && MEECROWAVE_HOME=`cygpath --unix "$MEECROWAVE_HOME"` |
| [ -n "$MEECROWAVE_BASE" ] && MEECROWAVE_BASE=`cygpath --unix "$MEECROWAVE_BASE"` |
| [ -n "$CLASSPATH" ] && CLASSPATH=`cygpath --path --unix "$CLASSPATH"` |
| fi |
| |
| # Ensure that neither MEECROWAVE_HOME nor MEECROWAVE_BASE contains a colon |
| # as this is used as the separator in the classpath and Java provides no |
| # mechanism for escaping if the same character appears in the path. |
| case $MEECROWAVE_HOME in |
| *:*) echo "Using MEECROWAVE_HOME: $MEECROWAVE_HOME"; |
| echo "Unable to start as MEECROWAVE_HOME contains a colon (:) character"; |
| exit 1; |
| esac |
| case $MEECROWAVE_BASE in |
| *:*) echo "Using MEECROWAVE_BASE: $MEECROWAVE_BASE"; |
| echo "Unable to start as MEECROWAVE_BASE contains a colon (:) character"; |
| exit 1; |
| esac |
| |
| # For OS400 |
| if $os400; then |
| # Set job priority to standard for interactive (interactive - 6) by using |
| # the interactive priority - 6, the helper threads that respond to requests |
| # will be running at the same priority as interactive jobs. |
| COMMAND='chgjob job('$JOBNAME') runpty(6)' |
| system $COMMAND |
| |
| # Enable multi threading |
| export QIBM_MULTI_THREADED=Y |
| fi |
| |
| # Get standard Java environment variables |
| # Make sure prerequisite environment variables are set |
| if [ -z "$JAVA_HOME" -a -z "$JRE_HOME" ]; then |
| if $darwin; then |
| # Bugzilla 54390 |
| if [ -x '/usr/libexec/java_home' ] ; then |
| export JAVA_HOME=`/usr/libexec/java_home` |
| # Bugzilla 37284 (reviewed). |
| elif [ -d "/System/Library/Frameworks/JavaVM.framework/Versions/CurrentJDK/Home" ]; then |
| export JAVA_HOME="/System/Library/Frameworks/JavaVM.framework/Versions/CurrentJDK/Home" |
| fi |
| else |
| JAVA_PATH=`which java 2>/dev/null` |
| if [ "x$JAVA_PATH" != "x" ]; then |
| JAVA_PATH=`dirname $JAVA_PATH 2>/dev/null` |
| JRE_HOME=`dirname $JAVA_PATH 2>/dev/null` |
| fi |
| if [ "x$JRE_HOME" = "x" ]; then |
| # XXX: Should we try other locations? |
| if [ -x /usr/bin/java ]; then |
| JRE_HOME=/usr |
| fi |
| fi |
| fi |
| if [ -z "$JAVA_HOME" -a -z "$JRE_HOME" ]; then |
| echo "Neither the JAVA_HOME nor the JRE_HOME environment variable is defined" |
| echo "At least one of these environment variable is needed to run this program" |
| exit 1 |
| fi |
| fi |
| if [ -z "$JAVA_HOME" -a "$1" = "debug" ]; then |
| echo "JAVA_HOME should point to a JDK in order to run in debug mode." |
| exit 1 |
| fi |
| if [ -z "$JRE_HOME" ]; then |
| JRE_HOME="$JAVA_HOME" |
| fi |
| |
| # If we're running under jdb, we need a full jdk. |
| if [ "$1" = "debug" ] ; then |
| if [ "$os400" = "true" ]; then |
| if [ ! -x "$JAVA_HOME"/bin/java -o ! -x "$JAVA_HOME"/bin/javac ]; then |
| echo "The JAVA_HOME environment variable is not defined correctly" |
| echo "This environment variable is needed to run this program" |
| echo "NB: JAVA_HOME should point to a JDK not a JRE" |
| exit 1 |
| fi |
| else |
| if [ ! -x "$JAVA_HOME"/bin/java -o ! -x "$JAVA_HOME"/bin/jdb -o ! -x "$JAVA_HOME"/bin/javac ]; then |
| echo "The JAVA_HOME environment variable is not defined correctly" |
| echo "This environment variable is needed to run this program" |
| echo "NB: JAVA_HOME should point to a JDK not a JRE" |
| exit 1 |
| fi |
| fi |
| fi |
| |
| # Set standard commands for invoking Java, if not already set. |
| if [ -z "$_RUNJAVA" ]; then |
| _RUNJAVA="$JRE_HOME"/bin/java |
| fi |
| if [ "$os400" != "true" ]; then |
| if [ -z "$_RUNJDB" ]; then |
| _RUNJDB="$JAVA_HOME"/bin/jdb |
| fi |
| fi |
| |
| # Add on extra jar files to CLASSPATH |
| if [ ! -z "$CLASSPATH" ] ; then |
| CLASSPATH="$CLASSPATH": |
| fi |
| if [ "$MEECROWAVE_HOME" != "$MEECROWAVE_BASE" ]; then |
| for i in "$MEECROWAVE_BASE/lib/"*.jar ; do |
| if [ -z "$CLASSPATH" ] ; then |
| CLASSPATH="$i" |
| else |
| CLASSPATH="$i:$CLASSPATH" |
| fi |
| done |
| fi |
| for i in "$MEECROWAVE_HOME/lib/"*.jar ; do |
| if [ -z "$CLASSPATH" ] ; then |
| CLASSPATH="$i" |
| else |
| CLASSPATH="$i:$CLASSPATH" |
| fi |
| done |
| |
| if [ -z "$MEECROWAVE_OUT" ] ; then |
| MEECROWAVE_OUT="$MEECROWAVE_BASE"/logs/meecrowave.out |
| fi |
| |
| if [ -z "$MEECROWAVE_TMPDIR" ] ; then |
| # Define the java.io.tmpdir to use for MEECROWAVE |
| MEECROWAVE_TMPDIR="$MEECROWAVE_BASE"/temp |
| fi |
| |
| # Bugzilla 37848: When no TTY is available, don't output to console |
| have_tty=0 |
| if [ "`tty`" != "not a tty" ]; then |
| have_tty=1 |
| fi |
| |
| # For Cygwin, switch paths to Windows format before running java |
| if $cygwin; then |
| JAVA_HOME=`cygpath --absolute --windows "$JAVA_HOME"` |
| JRE_HOME=`cygpath --absolute --windows "$JRE_HOME"` |
| MEECROWAVE_HOME=`cygpath --absolute --windows "$MEECROWAVE_HOME"` |
| MEECROWAVE_BASE=`cygpath --absolute --windows "$MEECROWAVE_BASE"` |
| MEECROWAVE_TMPDIR=`cygpath --absolute --windows "$MEECROWAVE_TMPDIR"` |
| CLASSPATH=`cygpath --path --windows "$CLASSPATH"` |
| JAVA_ENDORSED_DIRS=`cygpath --path --windows "$JAVA_ENDORSED_DIRS"` |
| fi |
| |
| if [ -z "$JSSE_OPTS" ] ; then |
| JSSE_OPTS="-Djdk.tls.ephemeralDHKeySize=2048" |
| fi |
| JAVA_OPTS="$JAVA_OPTS $JSSE_OPTS" |
| |
| # Register custom URL handlers |
| # Do this here so custom URL handles (specifically 'war:...') can be used in the security policy |
| JAVA_OPTS="$JAVA_OPTS -Djava.protocol.handler.pkgs=org.apache.MEECROWAVE.webresources" |
| |
| # Set juli LogManager config file if it is present and an override has not been issued |
| if [ -z "$LOGGING_CONFIG" ]; then |
| if [ -r "$MEECROWAVE_BASE"/conf/logging.properties ]; then |
| LOGGING_CONFIG="-Djava.util.logging.config.file=$MEECROWAVE_BASE/conf/logging.properties" |
| else |
| # Bugzilla 45585 |
| LOGGING_CONFIG="-Dmeecrowave.script.nologgingconfig" |
| fi |
| fi |
| |
| if [ -z "$LOGGING_MANAGER" ]; then |
| LOGGING_MANAGER="-Djava.util.logging.manager=org.apache.logging.log4j.jul.LogManager" |
| fi |
| |
| # Set UMASK unless it has been overridden |
| if [ -z "$UMASK" ]; then |
| UMASK="0027" |
| fi |
| umask $UMASK |
| |
| # Uncomment the following line to make the umask available when using the |
| # org.apache.MEECROWAVE.security.SecurityListener |
| #JAVA_OPTS="$JAVA_OPTS -Dorg.apache.MEECROWAVE.security.SecurityListener.UMASK=`umask`" |
| |
| if [ -z "$USE_NOHUP" ]; then |
| if $hpux; then |
| USE_NOHUP="true" |
| else |
| USE_NOHUP="false" |
| fi |
| fi |
| unset _NOHUP |
| if [ "$USE_NOHUP" = "true" ]; then |
| _NOHUP=nohup |
| fi |
| |
| if [ -z "$MEECROWAVE_PID" ]; then |
| MEECROWAVE_PID="$MEECROWAVE_BASE"/conf/meecrowave.pid |
| fi |
| # ----- Execute The Requested Command ----------------------------------------- |
| |
| # Bugzilla 37848: only output this if we have a TTY |
| if [ $have_tty -eq 1 ]; then |
| echo "Using MEECROWAVE_BASE: $MEECROWAVE_BASE" |
| echo "Using MEECROWAVE_HOME: $MEECROWAVE_HOME" |
| echo "Using MEECROWAVE_TMPDIR: $MEECROWAVE_TMPDIR" |
| echo "Using JRE_HOME: $JRE_HOME" |
| echo "Using CLASSPATH: $CLASSPATH" |
| if [ ! -z "$MEECROWAVE_PID" ]; then |
| echo "Using MEECROWAVE_PID: $MEECROWAVE_PID" |
| fi |
| fi |
| |
| if [ "$1" = "jpda" ] ; then |
| if [ -z "$JPDA_TRANSPORT" ]; then |
| JPDA_TRANSPORT="dt_socket" |
| fi |
| if [ -z "$JPDA_ADDRESS" ]; then |
| JPDA_ADDRESS="localhost:8000" |
| fi |
| if [ -z "$JPDA_SUSPEND" ]; then |
| JPDA_SUSPEND="n" |
| fi |
| if [ -z "$JPDA_OPTS" ]; then |
| JPDA_OPTS="-agentlib:jdwp=transport=$JPDA_TRANSPORT,address=$JPDA_ADDRESS,server=y,suspend=$JPDA_SUSPEND" |
| fi |
| MEECROWAVE_OPTS="$JPDA_OPTS $MEECROWAVE_OPTS" |
| shift |
| fi |
| |
| if [ -f "$MEECROWAVE_BASE"/conf/log4j2.xml ]; then |
| MEECROWAVE_OPTS="$MEECROWAVE_OPTS -Dlog4j.configurationFile="$MEECROWAVE_BASE"/conf/log4j2.xml" |
| fi |
| |
| if [ -f "$MEECROWAVE_BASE"/conf/meecrowave.properties ]; then |
| MEECROWAVE_ARGS="$MEECROWAVE_ARGS --meecrowave-properties="$MEECROWAVE_BASE"/conf/meecrowave.properties" |
| fi |
| if [ -f "$MEECROWAVE_BASE"/conf/server.xml ]; then |
| MEECROWAVE_ARGS="$MEECROWAVE_ARGS --server-xml="$MEECROWAVE_BASE"/conf/server.xml" |
| fi |
| MEECROWAVE_ARGS="$MEECROWAVE_ARGS --tmp-dir="$MEECROWAVE_TMPDIR"" |
| |
| if [ "$1" = "run" ]; then |
| |
| shift |
| eval exec "\"$_RUNJAVA\"" "\"$LOGGING_CONFIG\"" $LOGGING_MANAGER $JAVA_OPTS $MEECROWAVE_OPTS \ |
| -classpath "\"$CLASSPATH\"" \ |
| -Dmeecrowave.base="\"$MEECROWAVE_BASE\"" \ |
| -Dmeecrowave.home="\"$MEECROWAVE_HOME\"" \ |
| -Djava.io.tmpdir="\"$MEECROWAVE_TMPDIR\"" \ |
| ${main} "$MEECROWAVE_ARGS" "$@" |
| |
| elif [ "$1" = "start" ] ; then |
| |
| if [ ! -z "$MEECROWAVE_PID" ]; then |
| if [ -f "$MEECROWAVE_PID" ]; then |
| if [ -s "$MEECROWAVE_PID" ]; then |
| echo "Existing PID file found during start." |
| if [ -r "$MEECROWAVE_PID" ]; then |
| PID=`cat "$MEECROWAVE_PID"` |
| ps -p $PID >/dev/null 2>&1 |
| if [ $? -eq 0 ] ; then |
| echo "Meecrowave appears to still be running with PID $PID. Start aborted." |
| echo "If the following process is not a Meecrowave process, remove the PID file and try again:" |
| ps -f -p $PID |
| exit 1 |
| else |
| echo "Removing/clearing stale PID file." |
| rm -f "$MEECROWAVE_PID" >/dev/null 2>&1 |
| if [ $? != 0 ]; then |
| if [ -w "$MEECROWAVE_PID" ]; then |
| cat /dev/null > "$MEECROWAVE_PID" |
| else |
| echo "Unable to remove or clear stale PID file. Start aborted." |
| exit 1 |
| fi |
| fi |
| fi |
| else |
| echo "Unable to read PID file. Start aborted." |
| exit 1 |
| fi |
| else |
| rm -f "$MEECROWAVE_PID" >/dev/null 2>&1 |
| if [ $? != 0 ]; then |
| if [ ! -w "$MEECROWAVE_PID" ]; then |
| echo "Unable to remove or write to empty PID file. Start aborted." |
| exit 1 |
| fi |
| fi |
| fi |
| fi |
| fi |
| |
| shift |
| touch "$MEECROWAVE_OUT" |
| eval $_NOHUP "\"$_RUNJAVA\"" "\"$LOGGING_CONFIG\"" $LOGGING_MANAGER $JAVA_OPTS $MEECROWAVE_OPTS \ |
| -classpath "\"$CLASSPATH\"" \ |
| -Dmeecrowave.base="\"$MEECROWAVE_BASE\"" \ |
| -Dmeecrowave.home="\"$MEECROWAVE_HOME\"" \ |
| -Djava.io.tmpdir="\"$MEECROWAVE_TMPDIR\"" \ |
| ${main} "$MEECROWAVE_ARGS" "$@" \ |
| >> "$MEECROWAVE_OUT" 2>&1 "&" |
| |
| if [ ! -z "$MEECROWAVE_PID" ]; then |
| echo $! > "$MEECROWAVE_PID" |
| fi |
| |
| echo "Meecrowave started." |
| |
| elif [ "$1" = "stop" ] ; then |
| |
| shift |
| |
| SLEEP=15 |
| if [ ! -z "$1" ]; then |
| echo $1 | grep "[^0-9]" >/dev/null 2>&1 |
| if [ $? -gt 0 ]; then |
| SLEEP=$1 |
| shift |
| fi |
| fi |
| |
| FORCE=0 |
| if [ "$1" = "-force" ]; then |
| shift |
| FORCE=1 |
| fi |
| |
| if [ ! -z "$MEECROWAVE_PID" ]; then |
| if [ -f "$MEECROWAVE_PID" ]; then |
| if [ -s "$MEECROWAVE_PID" ]; then |
| kill -15 `cat "$MEECROWAVE_PID"` >/dev/null 2>&1 |
| if [ $? -gt 0 ]; then |
| echo "PID file found but no matching process was found. Stop aborted." |
| exit 1 |
| fi |
| else |
| echo "PID file is empty and has been ignored." |
| fi |
| else |
| echo "\$MEECROWAVE_PID was set but the specified file does not exist. Is Meecrowave running? Stop aborted." |
| exit 1 |
| fi |
| fi |
| |
| if [ ! -z "$MEECROWAVE_PID" ]; then |
| if [ -f "$MEECROWAVE_PID" ]; then |
| while [ $SLEEP -ge 0 ]; do |
| kill -15 `cat "$MEECROWAVE_PID"` >/dev/null 2>&1 |
| if [ $? -gt 0 ]; then |
| rm -f "$MEECROWAVE_PID" >/dev/null 2>&1 |
| if [ $? != 0 ]; then |
| if [ -w "$MEECROWAVE_PID" ]; then |
| cat /dev/null > "$MEECROWAVE_PID" |
| # If Meecrowave has stopped don't try and force a stop with an empty PID file |
| FORCE=0 |
| else |
| echo "The PID file could not be removed or cleared." |
| fi |
| fi |
| echo "Meecrowave stopped." |
| break |
| fi |
| if [ $SLEEP -gt 0 ]; then |
| sleep 1 |
| fi |
| if [ $SLEEP -eq 0 ]; then |
| echo "Meecrowave did not stop in time." |
| if [ $FORCE -eq 0 ]; then |
| echo "PID file was not removed." |
| fi |
| echo "To aid diagnostics a thread dump has been written to standard out." |
| kill -3 `cat "$MEECROWAVE_PID"` |
| fi |
| SLEEP=`expr $SLEEP - 1 ` |
| done |
| fi |
| fi |
| |
| KILL_SLEEP_INTERVAL=15 |
| if [ $FORCE -eq 1 ]; then |
| if [ -z "$MEECROWAVE_PID" ]; then |
| echo "Kill failed: \$MEECROWAVE_PID not set" |
| else |
| if [ -f "$MEECROWAVE_PID" ]; then |
| PID=`cat "$MEECROWAVE_PID"` |
| echo "Killing Meecrowave with the PID: $PID" |
| kill -0 $PID |
| while [ $KILL_SLEEP_INTERVAL -ge 0 ]; do |
| kill -0 `cat "$MEECROWAVE_PID"` >/dev/null 2>&1 |
| if [ $? -gt 0 ]; then |
| rm -f "$MEECROWAVE_PID" >/dev/null 2>&1 |
| if [ $? != 0 ]; then |
| if [ -w "$MEECROWAVE_PID" ]; then |
| cat /dev/null > "$MEECROWAVE_PID" |
| else |
| echo "The PID file could not be removed." |
| fi |
| fi |
| echo "The Meecrowave process has been killed." |
| break |
| fi |
| if [ $KILL_SLEEP_INTERVAL -gt 0 ]; then |
| sleep 1 |
| fi |
| KILL_SLEEP_INTERVAL=`expr $KILL_SLEEP_INTERVAL - 1 ` |
| done |
| if [ $KILL_SLEEP_INTERVAL -lt 0 ]; then |
| echo "Meecrowave has not been killed completely yet. The process might be waiting on some system call or might be UNINTERRUPTIBLE." |
| fi |
| fi |
| fi |
| fi |
| |
| else |
| |
| echo "Usage: MEECROWAVE.sh ( commands ... )" |
| echo "commands:" |
| echo " jpda start Start MEECROWAVE under JPDA debugger" |
| echo " run Start MEECROWAVE in the current window" |
| echo " start Start MEECROWAVE in a separate window" |
| echo " stop Stop MEECROWAVE, waiting up t/o 15 seconds for the process to end" |
| echo " stop n Stop MEECROWAVE, waiting up to n seconds for the process to end" |
| echo " stop -force Stop MEECROWAVE, wait up to 15 seconds and then use kill -KILL if still running" |
| echo " stop n -force Stop MEECROWAVE, wait up to n seconds and then use kill -KILL if still running" |
| echo "Note: Waiting for the process to end and use of the -force option require that \$MEECROWAVE_PID is defined" |
| exit 1 |
| |
| fi |
