| /************************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| *************************************************************/ |
| |
| |
| |
| // MARKER(update_precomp.py): autogen include statement, do not remove |
| #include "precompiled_sw.hxx" |
| |
| |
| #include <hintids.hxx> |
| #include <vcl/msgbox.hxx> |
| #include <sfx2/request.hxx> |
| #include <svl/eitem.hxx> |
| #include <svl/stritem.hxx> |
| #include <editeng/numitem.hxx> |
| #include <editeng/brshitem.hxx> |
| #include <numrule.hxx> |
| |
| #include "cmdid.h" |
| #include "wrtsh.hxx" |
| #include "view.hxx" |
| #include "viewopt.hxx" |
| #include "wdocsh.hxx" |
| #include "textsh.hxx" |
| #include "uiitems.hxx" |
| #include "swabstdlg.hxx" |
| #include <globals.hrc> |
| #include <sfx2/tabdlg.hxx> |
| #include <svx/nbdtmg.hxx> |
| #include <svx/nbdtmgfact.hxx> |
| #include <sfx2/viewfrm.hxx> |
| #include <sfx2/bindings.hxx> |
| |
| void SwTextShell::ExecEnterNum(SfxRequest &rReq) |
| { |
| //wg. Aufzeichnung schon vor dem evtl. Shellwechsel |
| switch(rReq.GetSlot()) |
| { |
| case FN_NUM_NUMBERING_ON: |
| { |
| GetShell().StartAllAction(); |
| SFX_REQUEST_ARG( rReq, pItem, SfxBoolItem, FN_PARAM_1 , sal_False ); |
| sal_Bool bMode = !GetShell().SelectionHasNumber(); // #i29560# |
| if ( pItem ) |
| bMode = pItem->GetValue(); |
| else |
| rReq.AppendItem( SfxBoolItem( FN_PARAM_1, bMode ) ); |
| |
| if ( bMode != (GetShell().SelectionHasNumber()) ) // #i29560# |
| { |
| rReq.Done(); |
| if( bMode ) |
| GetShell().NumOn(); |
| else |
| GetShell().NumOrBulletOff(); // #i29560# |
| } |
| sal_Bool bNewResult = GetShell().SelectionHasNumber(); |
| if (bNewResult!=bMode) { |
| SfxBindings& rBindings = GetView().GetViewFrame()->GetBindings(); |
| SfxBoolItem aItem(FN_NUM_NUMBERING_ON,!bNewResult); |
| rBindings.SetState(aItem); |
| SfxBoolItem aNewItem(FN_NUM_NUMBERING_ON,bNewResult); |
| rBindings.SetState(aNewItem); |
| } |
| GetShell().EndAllAction(); |
| } |
| break; |
| case FN_NUM_BULLET_ON: |
| { |
| GetShell().StartAllAction(); |
| SFX_REQUEST_ARG( rReq, pItem, SfxBoolItem, FN_PARAM_1 , sal_False ); |
| sal_Bool bMode = !GetShell().SelectionHasBullet(); // #i29560# |
| if ( pItem ) |
| bMode = pItem->GetValue(); |
| else |
| rReq.AppendItem( SfxBoolItem( FN_PARAM_1, bMode ) ); |
| |
| if ( bMode != (GetShell().SelectionHasBullet()) ) // #i29560# |
| { |
| rReq.Done(); |
| if( bMode ) |
| GetShell().BulletOn(); |
| else |
| GetShell().NumOrBulletOff(); // #i29560# |
| } |
| sal_Bool bNewResult = GetShell().SelectionHasBullet(); |
| if (bNewResult!=bMode) { |
| SfxBindings& rBindings = GetView().GetViewFrame()->GetBindings(); |
| SfxBoolItem aItem(FN_NUM_BULLET_ON,!bNewResult); |
| rBindings.SetState(aItem); |
| SfxBoolItem aNewItem(FN_NUM_BULLET_ON,bNewResult); |
| rBindings.SetState(aNewItem); |
| } |
| GetShell().EndAllAction(); |
| } |
| break; |
| |
| case FN_NUMBER_BULLETS: |
| case SID_OUTLINE_BULLET: |
| { |
| SfxItemSet aSet( GetPool(), |
| SID_HTML_MODE, SID_HTML_MODE, |
| SID_ATTR_NUMBERING_RULE, SID_PARAM_CUR_NUM_LEVEL, |
| 0 ); |
| SwDocShell* pDocSh = GetView().GetDocShell(); |
| const bool bHtml = 0 != PTR_CAST( SwWebDocShell, pDocSh ); |
| const SwNumRule* pNumRuleAtCurrentSelection = GetShell().GetNumRuleAtCurrentSelection(); |
| if ( pNumRuleAtCurrentSelection != NULL ) |
| { |
| SvxNumRule aRule = pNumRuleAtCurrentSelection->MakeSvxNumRule(); |
| |
| //convert type of linked bitmaps from SVX_NUM_BITMAP to (SVX_NUM_BITMAP|LINK_TOKEN) |
| for ( sal_uInt16 i = 0; i < aRule.GetLevelCount(); i++ ) |
| { |
| SvxNumberFormat aFmt( aRule.GetLevel( i ) ); |
| if ( SVX_NUM_BITMAP == aFmt.GetNumberingType() ) |
| { |
| const SvxBrushItem* pBrush = aFmt.GetBrush(); |
| const String* pLinkStr = pBrush != NULL |
| ? pBrush->GetGraphicLink() |
| : NULL; |
| if ( pLinkStr != NULL && pLinkStr->Len() > 0 ) |
| { |
| aFmt.SetNumberingType( SvxExtNumType( SVX_NUM_BITMAP | LINK_TOKEN ) ); |
| } |
| aRule.SetLevel( i, aFmt, aRule.Get( i ) != 0 ); |
| } |
| } |
| if ( bHtml ) |
| aRule.SetFeatureFlag( NUM_ENABLE_EMBEDDED_BMP, sal_False ); |
| |
| aSet.Put( SvxNumBulletItem( aRule ) ); |
| ASSERT( GetShell().GetNumLevel() < MAXLEVEL, |
| "<SwTextShell::ExecEnterNum()> - numbered node without valid list level. Serious defect -> please inform OD." ); |
| sal_uInt16 nLevel = GetShell().GetNumLevel(); |
| if ( nLevel < MAXLEVEL ) |
| { |
| nLevel = 1 << nLevel; |
| aSet.Put( SfxUInt16Item( SID_PARAM_CUR_NUM_LEVEL, nLevel ) ); |
| } |
| } |
| else |
| { |
| SwNumRule aRule( GetShell().GetUniqueNumRuleName(), |
| numfunc::GetDefaultPositionAndSpaceMode() ); |
| SvxNumRule aSvxRule = aRule.MakeSvxNumRule(); |
| const bool bRightToLeft = GetShell().IsInRightToLeftText( 0 ); |
| |
| if ( bHtml || bRightToLeft ) |
| { |
| for ( sal_uInt8 n = 0; n < MAXLEVEL; ++n ) |
| { |
| SvxNumberFormat aFmt( aSvxRule.GetLevel( n ) ); |
| if ( n && bHtml ) |
| { |
| // 1/2" fuer HTML |
| aFmt.SetLSpace( 720 ); |
| aFmt.SetAbsLSpace( n * 720 ); |
| } |
| // Default alignment for numbering/bullet should be rtl in rtl paragraph: |
| if ( bRightToLeft ) |
| { |
| aFmt.SetNumAdjust( SVX_ADJUST_RIGHT ); |
| } |
| aSvxRule.SetLevel( n, aFmt, sal_False ); |
| } |
| aSvxRule.SetFeatureFlag( NUM_ENABLE_EMBEDDED_BMP, sal_False ); |
| } |
| aSet.Put( SvxNumBulletItem( aSvxRule ) ); |
| } |
| |
| aSet.Put( SfxBoolItem( SID_PARAM_NUM_PRESET, sal_False ) ); |
| |
| // vor dem Dialog wird der HtmlMode an der DocShell versenkt |
| pDocSh->PutItem( SfxUInt16Item( SID_HTML_MODE, ::GetHtmlMode( pDocSh ) ) ); |
| |
| SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create(); |
| DBG_ASSERT( pFact, "Dialogdiet fail!" ); |
| SfxAbstractTabDialog* pDlg = |
| pFact->CreateSwTabDialog( DLG_SVXTEST_NUM_BULLET, GetView().GetWindow(), &aSet, GetShell() ); |
| DBG_ASSERT(pDlg, "Dialogdiet fail!"); |
| const sal_uInt16 nRet = pDlg->Execute(); |
| const SfxPoolItem* pItem; |
| if ( RET_OK == nRet ) |
| { |
| if ( SFX_ITEM_SET == pDlg->GetOutputItemSet()->GetItemState( SID_ATTR_NUMBERING_RULE, sal_False, &pItem ) ) |
| { |
| rReq.AppendItem( *pItem ); |
| rReq.Done(); |
| SvxNumRule* pSetRule = ( (SvxNumBulletItem*) pItem )->GetNumRule(); |
| pSetRule->UnLinkGraphics(); |
| SwNumRule aSetRule( pNumRuleAtCurrentSelection != NULL |
| ? pNumRuleAtCurrentSelection->GetName() |
| : GetShell().GetUniqueNumRuleName(), |
| numfunc::GetDefaultPositionAndSpaceMode() ); |
| aSetRule.SetSvxRule( *pSetRule, GetShell().GetDoc() ); |
| aSetRule.SetAutoRule( sal_True ); |
| // No start of new list, if an existing list style is edited. |
| // Otherwise start a new list. |
| const bool bCreateList = ( pNumRuleAtCurrentSelection == NULL ); |
| GetShell().SetCurNumRule( aSetRule, bCreateList ); |
| } |
| // wenn der Dialog mit OK verlassen wurde, aber nichts ausgewaehlt |
| // wurde dann muss die Numerierung zumindest eingeschaltet werden, |
| // wenn sie das noch nicht ist |
| else if ( pNumRuleAtCurrentSelection == NULL |
| && SFX_ITEM_SET == aSet.GetItemState( SID_ATTR_NUMBERING_RULE, sal_False, &pItem ) ) |
| { |
| rReq.AppendItem( *pItem ); |
| rReq.Done(); |
| SvxNumRule* pSetRule = ( (SvxNumBulletItem*) pItem )->GetNumRule(); |
| SwNumRule aSetRule( |
| GetShell().GetUniqueNumRuleName(), |
| numfunc::GetDefaultPositionAndSpaceMode() ); |
| aSetRule.SetSvxRule( *pSetRule, GetShell().GetDoc() ); |
| aSetRule.SetAutoRule( sal_True ); |
| // start new list |
| GetShell().SetCurNumRule( aSetRule, true ); |
| } |
| } |
| else if ( RET_USER == nRet ) |
| GetShell().DelNumRules(); |
| |
| delete pDlg; |
| } |
| break; |
| |
| default: |
| ASSERT( sal_False, "wrong Dispatcher" ); |
| return; |
| } |
| } |
| |
| |
| void SwTextShell::ExecSetNumber(SfxRequest &rReq) |
| { |
| const sal_uInt16 nSlot = rReq.GetSlot(); |
| switch ( nSlot ) |
| { |
| case FN_SVX_SET_NUMBER: |
| case FN_SVX_SET_BULLET: |
| { |
| SFX_REQUEST_ARG( rReq, pItem, SfxUInt16Item, nSlot, sal_False ); |
| if ( pItem != NULL ) |
| { |
| const sal_uInt16 nChoosenItemIdx = pItem->GetValue(); |
| if ( nChoosenItemIdx == DEFAULT_NONE ) |
| { |
| GetShell().DelNumRules(); |
| } |
| else |
| { |
| svx::sidebar::NBOTypeMgrBase* pNBOTypeMgr = |
| nSlot == FN_SVX_SET_NUMBER |
| ? svx::sidebar::NBOutlineTypeMgrFact::CreateInstance( svx::sidebar::eNBOType::NUMBERING ) |
| : svx::sidebar::NBOutlineTypeMgrFact::CreateInstance( svx::sidebar::eNBOType::MIXBULLETS ); |
| if ( pNBOTypeMgr != NULL ) |
| { |
| const SwNumRule* pNumRuleAtCurrentSelection = GetShell().GetNumRuleAtCurrentSelection(); |
| sal_uInt16 nActNumLvl = (sal_uInt16) 0xFFFF; |
| if ( pNumRuleAtCurrentSelection != NULL ) |
| { |
| sal_uInt16 nLevel = GetShell().GetNumLevel(); |
| if ( nLevel < MAXLEVEL ) |
| { |
| nActNumLvl = 1 << nLevel; |
| } |
| } |
| SwNumRule aNewNumRule( |
| pNumRuleAtCurrentSelection != NULL ? pNumRuleAtCurrentSelection->GetName() : GetShell().GetUniqueNumRuleName(), |
| numfunc::GetDefaultPositionAndSpaceMode() ); |
| SvxNumRule aNewSvxNumRule = pNumRuleAtCurrentSelection != NULL |
| ? pNumRuleAtCurrentSelection->MakeSvxNumRule() |
| : aNewNumRule.MakeSvxNumRule(); |
| // set unit attribute to NB Manager |
| SfxItemSet aSet( GetPool(), SID_ATTR_NUMBERING_RULE, SID_PARAM_CUR_NUM_LEVEL, 0 ); |
| aSet.Put( SvxNumBulletItem( aNewSvxNumRule ) ); |
| pNBOTypeMgr->SetItems( &aSet ); |
| pNBOTypeMgr->ApplyNumRule( aNewSvxNumRule, nChoosenItemIdx - 1, nActNumLvl ); |
| |
| aNewNumRule.SetSvxRule( aNewSvxNumRule, GetShell().GetDoc() ); |
| aNewNumRule.SetAutoRule( sal_True ); |
| const bool bCreateNewList = ( pNumRuleAtCurrentSelection == NULL ); |
| GetShell().SetCurNumRule( aNewNumRule, bCreateNewList ); |
| } |
| } |
| } |
| } |
| break; |
| |
| default: |
| ASSERT( sal_False, "wrong Dispatcher" ); |
| return; |
| } |
| } |
