*PPD-Adobe: "4.1" | |
*% Adobe Systems PostScript(R) Printer Description File | |
*% Copyright 1987-1993 Adobe Systems Incorporated. | |
*% All Rights Reserved. | |
*% Permission is granted for redistribution of this file as | |
*% long as this copyright notice is intact and the contents | |
*% of the file is not altered in any way from its original form. | |
*% End of Copyright statement | |
*FormatVersion: "4.1" | |
*FileVersion: "2.2" | |
*PCFileName: "HPIIP522.PPD" | |
*LanguageVersion: English | |
*Product: "(HP LaserJet IIP)" | |
*PSVersion: "(52.2) 0" | |
*ModelName: "HP LaserJet IIP PostScript Cartridge" | |
*ShortNickName: "HP LaserJet IIP Cartridge v52.2" | |
*NickName: "HP LaserJet IIP PostScript Cartridge v52.2" | |
*% ==== Options and Constraints ===== | |
*OpenGroup: InstallableOptions/Options Installed | |
*OpenUI *Option1/Optional Lower Tray: Boolean | |
*DefaultOption1: False | |
*Option1 True/Installed: "" | |
*Option1 False/Not Installed: "" | |
*CloseUI: *Option1 | |
*CloseGroup: InstallableOptions | |
*UIConstraints: *Option1 False *InputSlot Lower | |
*% General Information and Defaults =============== | |
*FreeVM: "1923298" | |
*LanguageLevel: "1" | |
*ColorDevice: False | |
*DefaultColorSpace: Gray | |
*VariablePaperSize: False | |
*FileSystem: False | |
*Throughput: "4" | |
*Password: "0" | |
*ExitServer: " | |
count 0 eq { % is the password on the stack? | |
true | |
}{ | |
dup % potential password | |
statusdict /checkpassword get exec not | |
} ifelse | |
{ % if no password or not valid | |
(WARNING : Cannot perform the exitserver command.) = | |
(Password supplied is not valid.) = | |
(Please contact the author of this software.) = flush | |
quit | |
} if | |
serverdict /exitserver get exec | |
" | |
*End | |
*Reset: " | |
count 0 eq { % is the password on the stack? | |
true | |
}{ | |
dup % potential password | |
statusdict /checkpassword get exec not | |
} ifelse | |
{ % if no password or not valid | |
(WARNING : Cannot reset printer.) = | |
(Password supplied is not valid.) = | |
(Please contact the author of this software.) = flush | |
quit | |
} if | |
serverdict /exitserver get exec | |
systemdict /quit get exec | |
(WARNING : Printer Reset Failed.) = flush | |
" | |
*End | |
*DefaultResolution: 300dpi | |
*?Resolution: " | |
save | |
initgraphics | |
0 0 moveto currentpoint matrix defaultmatrix transform | |
0 72 lineto currentpoint matrix defaultmatrix transform | |
3 -1 roll sub dup mul | |
3 1 roll exch sub dup mul | |
add sqrt round cvi | |
( ) cvs print (dpi) = flush | |
restore | |
" | |
*End | |
*% Halftone Information =============== | |
*ScreenFreq: "60.0" | |
*ScreenAngle: "45.0" | |
*DefaultScreenProc: Dot | |
*ScreenProc Dot: " | |
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 | |
sub }{dup mul exch dup mul add 1 exch sub }ifelse } | |
" | |
*End | |
*ScreenProc Line: "{ pop }" | |
*ScreenProc Ellipse: " | |
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub } | |
" | |
*End | |
*DefaultTransfer: Null | |
*Transfer Null: "{ }" | |
*Transfer Null.Inverse: "{ 1 exch sub }" | |
*% Paper Handling =================== | |
*% Use these entries to set paper size most of the time, unless there is | |
*% specific reason to use PageRegion. | |
*OpenUI *PageSize: PickOne | |
*OrderDependency: 30 AnySetup *PageSize | |
*DefaultPageSize: Letter | |
*PageSize Letter: "statusdict /lettertray get exec" | |
*PageSize Legal: "statusdict /legaltray get exec" | |
*PageSize Executive: "statusdict /executivetray get exec" | |
*PageSize A4: "statusdict /a4tray get exec" | |
*PageSize Comm10/Comm #10 Envelope: "statusdict /com10envelopetray get exec" | |
*PageSize Monarch/Monarch Envelope: "statusdict /monarcenvelopetray get exec" | |
*PageSize DL/DL Envelope: "statusdict /dlenvelopetray get exec" | |
*PageSize C5/C5 Envelope: "statusdict /c5envelopetray get exec" | |
*?PageSize: " | |
save | |
8 dict | |
dup /lettertray (Letter) put | |
dup /legaltray (Legal) put | |
dup /executivetray (Executive) put | |
dup /a4tray (A4) put | |
dup /com10envelopetray (Comm10) put | |
dup /monarcenvelopetray (Monarch) put | |
dup /dlenvelopetray (DL) put | |
dup /c5envelopetray (C5) put | |
statusdict /papersize get exec | |
3 1 roll {get} stopped {(Unknown)}if | |
exch not { print (.Transverse) }if | |
= flush | |
restore | |
" | |
*End | |
*CloseUI: *PageSize | |
*% These entries will set up the frame buffer. Usually used with manual feed. | |
*OpenUI *PageRegion: PickOne | |
*OrderDependency: 40 AnySetup *PageRegion | |
*DefaultPageRegion: Letter | |
*PageRegion Letter: "letter" | |
*PageRegion Legal: "legal" | |
*PageRegion Executive: "executivepage" | |
*PageRegion A4: "a4" | |
*PageRegion Comm10/Comm #10 Envelope: "com10envelope" | |
*PageRegion Monarch/Monarch Envelope: "monarcenvelope" | |
*PageRegion DL/DL Envelope: "dlenvelope" | |
*PageRegion C5/C5 Envelope: "c5envelope" | |
*CloseUI: *PageRegion | |
*% The following entries provide information about specific paper keywords. | |
*DefaultImageableArea: Letter | |
*ImageableArea Letter: "18 19 593 774 " | |
*ImageableArea Legal: "18 19 593 990 " | |
*ImageableArea Executive: "18 19 501 738 " | |
*ImageableArea A4: "18 19 578 824 " | |
*ImageableArea Comm10/Comm #10 Envelope: "18 19 278 666 " | |
*ImageableArea Monarch/Monarch Envelope: "18 19 259 522 " | |
*ImageableArea DL/DL Envelope: "18 19 294 605 " | |
*ImageableArea C5/C5 Envelope: "18 19 440 630 " | |
*?ImageableArea: " | |
save | |
/cvp {( ) cvs print ( ) print } bind def | |
/upperright {10000 mul floor 10000 div} bind def | |
/lowerleft {10000 mul ceiling 10000 div} bind def | |
newpath clippath pathbbox | |
4 -2 roll exch 2 {lowerleft cvp} repeat | |
exch 2 {upperright cvp} repeat flush | |
restore | |
" | |
*End | |
*% These provide the physical dimensions of the paper (by keyword) | |
*DefaultPaperDimension: Letter | |
*PaperDimension Letter: "612 792" | |
*PaperDimension Legal: "612 1008" | |
*PaperDimension Executive: "522 756" | |
*PaperDimension A4: "595 842" | |
*PaperDimension Comm10/Comm #10 Envelope: "297 684" | |
*PaperDimension Monarch/Monarch Envelope: "279 540" | |
*PaperDimension DL/DL Envelope: "312 624" | |
*PaperDimension C5/C5 Envelope: "459 649" | |
*RequiresPageRegion All: True | |
*LandscapeOrientation: Plus90 | |
*OpenUI *InputSlot: PickOne | |
*OrderDependency: 20 AnySetup *InputSlot | |
*DefaultInputSlot: Upper | |
*InputSlot Upper: "0 statusdict /setpapertray get exec" | |
*InputSlot Lower: "1 statusdict /setpapertray get exec" | |
*?InputSlot: " | |
save | |
[ (Upper) (Lower) ] statusdict /papertray get exec | |
{get exec} stopped { pop pop (Unknown)} if = flush | |
restore | |
" | |
*End | |
*CloseUI: *InputSlot | |
*OpenUI *ManualFeed: Boolean | |
*OrderDependency: 20 AnySetup *ManualFeed | |
*DefaultManualFeed: False | |
*ManualFeed True: "statusdict /manualfeed true put" | |
*ManualFeed False: "statusdict /manualfeed false put" | |
*?ManualFeed: " | |
save | |
statusdict /manualfeed get {(True)}{(False)}ifelse = flush | |
restore | |
" | |
*End | |
*CloseUI: *ManualFeed | |
*DefaultOutputOrder: Normal | |
*OpenUI *TraySwitch: Boolean | |
*OrderDependency: 50 AnySetup *TraySwitch | |
*DefaultTraySwitch: False | |
*TraySwitch True: "true statusdict /settrayswitch get exec" | |
*TraySwitch False: "false statusdict /settrayswitch get exec" | |
*?TraySwitch: " | |
save | |
statusdict /trayswitch get exec {(True)}{(False)}ifelse = flush | |
restore | |
" | |
*End | |
*CloseUI: *TraySwitch | |
*% Font Information ===================== | |
*DefaultFont: Courier | |
*Font AvantGarde-Book: Standard "(001.002)" Standard ROM | |
*Font AvantGarde-BookOblique: Standard "(001.002)" Standard ROM | |
*Font AvantGarde-Demi: Standard "(001.003)" Standard ROM | |
*Font AvantGarde-DemiOblique: Standard "(001.003)" Standard ROM | |
*Font Bookman-Demi: Standard "(001.001)" Standard ROM | |
*Font Bookman-DemiItalic: Standard "(001.001)" Standard ROM | |
*Font Bookman-Light: Standard "(001.001)" Standard ROM | |
*Font Bookman-LightItalic: Standard "(001.001)" Standard ROM | |
*Font Courier: Standard "(002.002)" Standard ROM | |
*Font Courier-Bold: Standard "(002.002)" Standard ROM | |
*Font Courier-BoldOblique: Standard "(002.002)" Standard ROM | |
*Font Courier-Oblique: Standard "(002.002)" Standard ROM | |
*Font Helvetica: Standard "(001.002)" Standard ROM | |
*Font Helvetica-Bold: Standard "(001.002)" Standard ROM | |
*Font Helvetica-BoldOblique: Standard "(001.002)" Standard ROM | |
*Font Helvetica-Narrow: Standard "(001.002)" Standard ROM | |
*Font Helvetica-Narrow-Bold: Standard "(001.002)" Standard ROM | |
*Font Helvetica-Narrow-BoldOblique: Standard "(001.002)" Standard ROM | |
*Font Helvetica-Narrow-Oblique: Standard "(001.002)" Standard ROM | |
*Font Helvetica-Oblique: Standard "(001.002)" Standard ROM | |
*Font NewCenturySchlbk-Bold: Standard "(001.006)" Standard ROM | |
*Font NewCenturySchlbk-BoldItalic: Standard "(001.004)" Standard ROM | |
*Font NewCenturySchlbk-Italic: Standard "(001.003)" Standard ROM | |
*Font NewCenturySchlbk-Roman: Standard "(001.004)" Standard ROM | |
*Font Palatino-Bold: Standard "(001.002)" Standard ROM | |
*Font Palatino-BoldItalic: Standard "(001.002)" Standard ROM | |
*Font Palatino-Italic: Standard "(001.002)" Standard ROM | |
*Font Palatino-Roman: Standard "(001.001)" Standard ROM | |
*Font Symbol: Special "(001.003)" Special ROM | |
*Font Times-Bold: Standard "(001.002)" Standard ROM | |
*Font Times-BoldItalic: Standard "(001.004)" Standard ROM | |
*Font Times-Italic: Standard "(001.002)" Standard ROM | |
*Font Times-Roman: Standard "(001.002)" Standard ROM | |
*Font ZapfChancery-MediumItalic: Standard "(001.003)" Standard ROM | |
*Font ZapfDingbats: Special "(001.002)" Special ROM | |
*?FontQuery: " | |
save | |
/str 100 string dup 0 (fonts/) putinterval def | |
{ | |
count 1 gt | |
{ | |
exch dup str 6 94 getinterval cvs | |
(/) print print (:) print | |
FontDirectory exch known | |
{(Yes)}{(No)} ifelse = | |
} | |
{exit} ifelse | |
}bind loop | |
(*) = flush | |
restore | |
" | |
*End | |
*?FontList: " | |
save | |
FontDirectory { pop == } bind forall flush | |
(*) = flush | |
restore | |
" | |
*End | |
*% Printer Messages (verbatim from printer): | |
*Message: "%%[ exitserver: permanent state may be changed ]%%" | |
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%" | |
*Message: "\FontName\ not found, using Courier" | |
*% Status (format: %%[ status: <one of these> ]%% ) | |
*Status: "idle" | |
*Status: "busy" | |
*Status: "waiting" | |
*Status: "printing" | |
*Status: "PrinterError: Out Of Paper" | |
*Status: "PrinterError: Cover Open" | |
*Status: "PrinterError: Feed Manual" | |
*Status: "PrinterError: Paper Jam" | |
*Status: "PrinterError: Miscellaneous Error" | |
*Status: "PrinterError: Fatal Error" | |
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% ) | |
*Source: "serial9" | |
*Source: "serial25" | |
*Source: "AppleTalk" | |
*Source: "Centronics" | |
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%) | |
*PrinterError: "Out Of Paper" | |
*PrinterError: "Cover Open" | |
*PrinterError: "Feed Manual" | |
*PrinterError: "Paper Jam" | |
*PrinterError: "Miscellaneous Error" | |
*PrinterError: "Fatal Error" | |
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]" | |
*% Color Separation Information ===================== | |
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi | |
*InkName: ProcessBlack/Process Black | |
*InkName: CustomColor/Custom Color | |
*InkName: ProcessCyan/Process Cyan | |
*InkName: ProcessMagenta/Process Magenta | |
*InkName: ProcessYellow/Process Yellow | |
*% For 60 lpi / 300 dpi =============================== | |
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45" | |
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45" | |
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15" | |
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75" | |
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0" | |
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
*% For 53 lpi / 300 dpi =============================== | |
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0" | |
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0" | |
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651" | |
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349" | |
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0" | |
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033" | |
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033" | |
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" | |
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" | |
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0" | |
*% For "HP LaserJet IIP" version 52.2 | |
*% Produced by "BuildPPD.ps" version 3.0 edit 58 | |
*% Converted to meet 4.0 specification | |
*% Last Edit Date: Jun 1 1993 | |
*% The byte count of this file should be exactly 012539 or 012913 | |
*% depending on the filesystem it resides in. | |
*% end of PPD file for HP LaserJet IIP |