| /************************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| *************************************************************/ |
| |
| |
| #ifndef __com_sun_star_sdb_XSingleSelectQueryComposer_idl__ |
| #define __com_sun_star_sdb_XSingleSelectQueryComposer_idl__ |
| |
| #ifndef __com_sun_star_beans_XPropertySet_idl__ |
| #include <com/sun/star/beans/XPropertySet.idl> |
| #endif |
| |
| #ifndef __com_sun_star_beans_PropertyValue_idl__ |
| #include <com/sun/star/beans/PropertyValue.idl> |
| #endif |
| |
| #ifndef __com_sun_star_sdbc_SQLException_idl__ |
| #include <com/sun/star/sdbc/SQLException.idl> |
| #endif |
| |
| #ifndef __com_sun_star_sdb_XSingleSelectQueryAnalyzer_idl__ |
| #include <com/sun/star/sdb/XSingleSelectQueryAnalyzer.idl> |
| #endif |
| |
| //============================================================================= |
| |
| module com { module sun { module star { module sdb { |
| |
| //============================================================================= |
| |
| /** simplifies the composing of single select statements. |
| |
| <p> |
| The interface can be used for composing single SELECT statements without knowing the |
| structure of the used query. |
| </p> |
| |
| @see com::sun::star::sdb::SingleSelectQueryComposer |
| */ |
| published interface XSingleSelectQueryComposer: XSingleSelectQueryAnalyzer |
| { |
| //------------------------------------------------------------------------- |
| // FILTER |
| //------------------------------------------------------------------------- |
| |
| /** makes it possible to set a filter condition for the query. |
| @param filter |
| the filter to set |
| @throws com::sun::star::sdbc::SQLException |
| if a database access error occurs |
| or the statement isn't valid |
| or the statement isn't parseable. |
| */ |
| void setFilter([in] string filter) |
| raises (com::sun::star::sdbc::SQLException); |
| //------------------------------------------------------------------------- |
| |
| /** appends a new set of filter criteria which is split into levels. |
| @param filter |
| The filter criteria is split into levels. Each level represents the |
| OR criteria. Within each level, the filters are provided as an AND criteria |
| with the name of the column and the filter condition. The filter condition |
| is of type string. The operator used, is defined by <type scope="com::sun::star::sdb">SQLFilterOperator</type>. |
| |
| @throws com::sun::star::sdbc::SQLException |
| if a database access error occurs. |
| */ |
| void setStructuredFilter([in] sequence< sequence<com::sun::star::beans::PropertyValue> > filter) |
| raises (com::sun::star::sdbc::SQLException,com::sun::star::lang::IllegalArgumentException); |
| //------------------------------------------------------------------------- |
| |
| /** appends a new filter condition by a |
| <type scope="com::sun::star::sdb">DataColumn</type> |
| providing the name and the value for the filter. |
| The value property must be supported by the <type scope="com::sun::star::sdb">DataColumn</type>. |
| @param column |
| the column which is used to create a filter |
| @param andCriteria |
| If <TRUE/> the filter condition will be appended as an AND condition, otherwise |
| the new filter condition will be appended as OR criteria. |
| E.g. (xx AND bb AND cc) OR newCriteria |
| @param filterOperator |
| The operator used, is defined by <type scope="com::sun::star::sdb">SQLFilterOperator</type>. |
| @throws com::sun::star::sdbc::SQLException |
| if a database access error occurs. |
| */ |
| void appendFilterByColumn([in] com::sun::star::beans::XPropertySet column,[in] boolean andCriteria,[in] long filterOperator) |
| raises (com::sun::star::sdbc::SQLException); |
| |
| //------------------------------------------------------------------------- |
| // GROUP BY |
| //------------------------------------------------------------------------- |
| |
| |
| /** makes it possible to set a group for the query. |
| @param group |
| the group part to set |
| @throws com::sun::star::sdbc::SQLException |
| if a database access error occurs |
| or the statement isn't valid |
| or the statement isn't parseable.. |
| */ |
| void setGroup([in] string group) |
| raises (com::sun::star::sdbc::SQLException); |
| |
| //------------------------------------------------------------------------- |
| |
| /** appends an additional part to the group criteria of the select |
| statement. The column must be a <type scope="com::sun::star::sdbcx">Column</type>. |
| @param column |
| the column which is used to create a group part |
| @throws com::sun::star::sdbc::SQLException |
| if a database access error occurs. |
| */ |
| void appendGroupByColumn([in] com::sun::star::beans::XPropertySet column) |
| raises (com::sun::star::sdbc::SQLException); |
| |
| //------------------------------------------------------------------------- |
| // HAVING |
| //------------------------------------------------------------------------- |
| |
| /** makes it possible to set a HAVING filter condition for the query. |
| @param filter |
| the filter to set |
| @throws com::sun::star::sdbc::SQLException |
| if a database access error occurs |
| or the statement isn't valid |
| or the statement isn't parseable. |
| */ |
| void setHavingClause([in] string filter) |
| raises (com::sun::star::sdbc::SQLException); |
| |
| //------------------------------------------------------------------------- |
| |
| /** appends a new set of HAVING filter criteria which is split into levels. |
| @param filter |
| The HAVING filter criteria is split into levels. Each level represents the |
| OR criteria. Within each level, the filters are provided as an AND criteria |
| with the name of the column and the filter condition. The filter condition |
| is of type string. The operator used, is defined by <type scope="com::sun::star::sdb">SQLFilterOperator</type>. |
| |
| @throws com::sun::star::sdbc::SQLException |
| if a database access error occurs. |
| */ |
| void setStructuredHavingClause([in] sequence< sequence<com::sun::star::beans::PropertyValue> > filter) |
| raises (com::sun::star::sdbc::SQLException); |
| //------------------------------------------------------------------------- |
| |
| /** appends a new HAVING filter condition by a |
| <type scope="com::sun::star::sdb">DataColumn</type> |
| providing the name and the value for the filter. |
| @param column |
| the column which is used to create a filter |
| @param andCriteria |
| If <TRUE/> the filter condition will be appended as an AND condition, otherwise |
| the new filter condition will be appended as OR criteria. |
| E.g. (xx AND bb AND cc) OR newCriteria |
| @param filterOperator |
| The operator used, is defined by <type scope="com::sun::star::sdb">SQLFilterOperator</type>. |
| @throws com::sun::star::sdbc::SQLException |
| if a database access error occurs. |
| */ |
| void appendHavingClauseByColumn([in] com::sun::star::beans::XPropertySet column,[in] boolean andCriteria,[in] long filterOperator) |
| raises (com::sun::star::sdbc::SQLException); |
| |
| //------------------------------------------------------------------------- |
| // ORDER BY |
| //------------------------------------------------------------------------- |
| |
| /** makes it possible to set a sort condition for the query. |
| @param order |
| the order part to set |
| @throws com::sun::star::sdbc::SQLException |
| if a database access error occurs |
| or the order isn't valid |
| or the statement isn't parseable. |
| */ |
| void setOrder([in] string order) |
| raises (com::sun::star::sdbc::SQLException); |
| |
| //------------------------------------------------------------------------- |
| |
| /** appends an additional part to the sort order criteria of the select |
| statement. The column must be a <type scope="com::sun::star::sdbcx">Column</type>. |
| @param column |
| the column which is used to create a order part |
| @param ascending |
| <TRUE/> when the order should be ascending, otherwise if <FALSE/> descending. |
| @throws com::sun::star::sdbc::SQLException |
| if a database access error occurs. |
| */ |
| void appendOrderByColumn([in] com::sun::star::beans::XPropertySet column, |
| [in] boolean ascending) |
| raises (com::sun::star::sdbc::SQLException); |
| |
| //------------------------------------------------------------------------- |
| // culmulative composing |
| //------------------------------------------------------------------------- |
| |
| /** sets a new elementary query for the composer |
| |
| <p>An elementary query or statement is a (single select) statement whose parts are |
| not covered by the various set and get methods of the composer. That is, if the |
| elementary statement contains a filter clause, a call to |
| <member>XSingleSelectQueryAnalyzer::getFilter</member> will not return you this |
| filter. Instead, only filters which have been set using for instance <member>setFilter</member> |
| are covered by the get methods.</p> |
| |
| <p>The only methods which take all parts of the elementary statement into account are |
| <member>XSingleSelectQueryAnalyzer::getQuery</member> and |
| <member>XSingleSelectQueryAnalyzer::getQueryWithSubstitution</member>, which always returns |
| the complete composed query.</p> |
| |
| <p>As a result, you can use the composer to build culmulative filter expressions. That |
| is, you can set <member>ElementaryQuery</member> to a statement already containing |
| filters, and then use <member>setFilter</member> to append additional filters.</p> |
| |
| <p>The very same holds for sort orders, <code>HAVING</code> and <code>GROUP BY</code> |
| clauses.</p> |
| |
| <p>There are various use cases for this. For instance, you might want to use the |
| statement represented by a <type>QueryDefinition</type>, and extend it with additional |
| filters or sort orders, while not touching the respective parts already present |
| in <member>QueryDefinition::Command</member>. This can be achieved by setting the |
| <member>QueryDefinition::Command</member> as <member>ElementaryQuery</member> of a |
| <type>SingleSelectQueryComposer</type>.</p> |
| |
| <p>If, in such a scenario, you would be interested in the filter part of the |
| <member>QueryDefinition::Command</member>, you would set it via |
| <member>XSingleSelectQueryAnalyzer::setQuery</member>, and retrieve the filter |
| part via <member>XSingleSelectQueryAnalyzer::getFilter</member>.</p> |
| |
| <p>If you'd be interested in the composed filter, you would set the |
| <member>QueryDefinition::Command</member> as <member>ElementaryQuery</member>, add your |
| filter, and propagate the resulting query (<member>XSingleSelectQueryAnalyzer::getQuery</member>) |
| to an <type>SingleSelectQueryAnalyzer</type> instance via |
| <member>XSingleSelectQueryAnalyzer::setQuery</member>.</p> |
| */ |
| [attribute] string ElementaryQuery |
| { |
| set raises (com::sun::star::sdbc::SQLException); |
| }; |
| }; |
| |
| //============================================================================= |
| |
| }; }; }; }; |
| |
| /*============================================================================= |
| |
| =============================================================================*/ |
| #endif |
| |