/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/


#ifndef INCLUDED_SLIDESHOW_EVENTMULTIPLEXER_HXX
#define INCLUDED_SLIDESHOW_EVENTMULTIPLEXER_HXX

#include "eventhandler.hxx"
#include "hyperlinkhandler.hxx"
#include "mouseeventhandler.hxx"
#include "animationeventhandler.hxx"
#include "pauseeventhandler.hxx"
#include "shapelistenereventhandler.hxx"
#include "shapecursoreventhandler.hxx"
#include "userpainteventhandler.hxx"
#include "vieweventhandler.hxx"
#include "viewrepainthandler.hxx"

#include <boost/scoped_ptr.hpp>
#include <boost/noncopyable.hpp>


namespace slideshow {
namespace internal {

class EventQueue;
class UnoViewContainer;
class AnimationNode;

struct EventMultiplexerImpl;

/** This class multiplexes user-activated and
    slide-show global events.
    
    This class listens at the XSlideShowView and fires events
    registered for certain user actions. Furthermore, global
    slide show state changes (such as start or end of a slide)
    are handled as well. Note that registered events which
    have a non-zero timeout (i.e. events that return non-zero
    from getActivationTime()) will not be fired immediately
    after the user action occured, but only after the given
    timeout. Which is actually a feature.
*/
class EventMultiplexer : private ::boost::noncopyable
{
public:
    /** Create an event multiplexer
        
        @param rEventQueue
        Reference to the main event queue. Since we hold this
        object by plain reference, it must live longer than we
        do. On the other hand, that queue must not fire events
        after this object is destroyed, since we might
        schedule events there which itself contain plain
        references to this object. Basically, EventQueue and
        EventMultiplexer should have the same lifetime, and since
        this is not possible, both must be destructed in a
        phased mode: first clear both of any remaining events,
        then destruct them.

        @param rViewContainer
        Globally managed list of all registered views. Used to
        determine event sources, and for registering view listeners
        at.
    */
    EventMultiplexer( EventQueue&             rEventQueue,
                      UnoViewContainer const& rViewContainer );
    ~EventMultiplexer();

    
    // Management methods
    // =========================================================
    
    /** Clear all registered handlers.
     */
    void clear();
    

    // Automatic mode methods
    // =========================================================
    
    /** Change automatic mode.
        
        @param bIsAuto
        When true, events will be fired automatically, not
        only triggered by UI events. When false, auto events
        will quit.
    */
    void setAutomaticMode( bool bIsAuto );
    
    /** Get automatic mode setting.
     */
    bool getAutomaticMode() const;
    
    /** Set the timeout for automatic mode.
        
        @param nTimeout
        Timeout, between end of effect until start of next
        effect.
    */
    void setAutomaticTimeout( double nTimeout );
    
    /** Get automatic mode timeout value.
     */
    double getAutomaticTimeout() const;
    
    // Handler registration methods
    // =========================================================
    
    /** Register an event handler that will be called when views are
        changed.
        
        For each view added, viewAdded() will be called on the
        handler. For each view removed, viewRemoved() will be
        called. Each modified view will cause a viewChanged() call on
        each handler.

        You don't need to deregister the handler, it will be
        automatically removed, once the pointee becomes stale.
        
        @param rHandler
        Handler to call.
    */
    void addViewHandler( const ViewEventHandlerWeakPtr& rHandler );
    void removeViewHandler( const ViewEventHandlerWeakPtr& rHandler );
    
    /** Register an event handler that will be called when a view gets
        clobbered.
        
        Note that <em>all</em> registered handlers will be called when
        the event. This is in contrast to the mouse events below.
        
        @param rHandler
        Handler to call when a view needs a repaint
    */
    void addViewRepaintHandler( const ViewRepaintHandlerSharedPtr& rHandler );
    void removeViewRepaintHandler( const ViewRepaintHandlerSharedPtr& rHandler );

    /** Register an event handler that will be called when
        XShapeListeners are changed.
        
        @param rHandler
        Handler to call when a shape listener changes
    */
    void addShapeListenerHandler( const ShapeListenerEventHandlerSharedPtr& rHandler );
    void removeShapeListenerHandler( const ShapeListenerEventHandlerSharedPtr& rHandler );

    /** Register an event handler that will be called when
        XShapeListeners are changed.
        
        @param rHandler
        Handler to call when a shape listener changes
    */
    void addShapeCursorHandler( const ShapeCursorEventHandlerSharedPtr& rHandler );
    void removeShapeCursorHandler( const ShapeCursorEventHandlerSharedPtr& rHandler );

    /** Register an event handler that will be called when
        user paint parameters change.
        
        @param rHandler
        Handler to call when a shape listener changes
    */
    void addUserPaintHandler( const UserPaintEventHandlerSharedPtr& rHandler );
    void removeUserPaintHandler( const UserPaintEventHandlerSharedPtr& rHandler );

    /** Register an event handler that will be called when the
        user requests the next effect.
        
        For every nextEffect event, only one of the handlers
        registered here is called. The handlers are considered
        with decreasing priority, i.e. the handler with the
        currently highest priority will be called.
        
        @param rHandler
        Handler to call when the next effect should start
        
        @param nPriority
        Priority with which the handlers are called. The
        higher the priority, the earlier this handler will be
        tried.
    */
    void addNextEffectHandler( const EventHandlerSharedPtr& rHandler,
                               double                       nPriority );
    void removeNextEffectHandler( const EventHandlerSharedPtr& rHandler );
    
    /** Register an event handler that will be called when the
        slide is just shown.
        
        Note that <em>all</em> registered handlers will be called
        when the slide start occurs. This is in contrast to
        the mouse events below.
        
        @param rHandler
        Handler to call when the next slide starts
    */
    void addSlideStartHandler( const EventHandlerSharedPtr& rHandler );
    void removeSlideStartHandler( const EventHandlerSharedPtr& rHandler );
    
    /** Register an event handler that will be called when the
        slide is about to vanish.
        
        Note that <em>all</em> registered handlers will be
        called when the slide end occurs. This is in contrast
        to the mouse events below.
        
        @param rHandler
        Handler to call when the current slide ends
    */
    void addSlideEndHandler( const EventHandlerSharedPtr& rHandler );
    void removeSlideEndHandler( const EventHandlerSharedPtr& rHandler );
    
    /** Register an event handler that will be called when an
        XAnimationNode starts its active duration.
        
        Note that <em>all</em> registered handlers will be called
        when the animation start occurs. This is in contrast to
        the mouse events below.
        
        @param rHandler
        Handler to call when the animation start
    */
    void addAnimationStartHandler(
        const AnimationEventHandlerSharedPtr& rHandler );
    void removeAnimationStartHandler(
        const AnimationEventHandlerSharedPtr& rHandler );
    
    /** Register an event handler that will be called when an
        XAnimationNode ends its active duration.
        
        Note that <em>all</em> registered handlers will be called
        when the animation end occurs. This is in contrast to
        the mouse events below.
        
        @param rHandler
        Handler to call when the animation ends
    */
    void addAnimationEndHandler(
        const AnimationEventHandlerSharedPtr& rHandler );
    void removeAnimationEndHandler(
        const AnimationEventHandlerSharedPtr& rHandler );

    /** Register an event handler that will be called when the
        main animation sequence of a slide ends its active
        duration.
        
        Note that <em>all</em> registered handlers will be
        called when the animation end occurs. This is in
        contrast to the mouse events below.
        
        @param rHandler
        Handler to call when the animation ends
    */
    void addSlideAnimationsEndHandler(
        const EventHandlerSharedPtr& rHandler );
    void removeSlideAnimationsEndHandler(
        const EventHandlerSharedPtr& rHandler );
    
    /** Register an event handler that will be called when an
        XAudio node's sound stops playing.
        
        Note that <em>all</em> registered handlers will be
        called when the audio stops. This is in contrast to
        the mouse events below.
        
        @param rHandler
        Handler to call when the audio stops
    */
    void addAudioStoppedHandler(
        const AnimationEventHandlerSharedPtr& rHandler );
    void removeAudioStoppedHandler(
        const AnimationEventHandlerSharedPtr& rHandler );
    
    /** Register an event handler that will be called when an
        XCommand node's with the command STOPAUDIO is activated.
        
        Note that <em>all</em> registered handlers will be
        called when the audio stops. This is in contrast to
        the mouse events below.
        
        @param rHandler
        Handler to call when command is activated
    */
    void addCommandStopAudioHandler(
        const AnimationEventHandlerSharedPtr& rHandler );
    void removeCommandStopAudioHandler(
        const AnimationEventHandlerSharedPtr& rHandler );
    
    /** Register a handler that is called when the show enters
        or exits pause mode.
    */
    void addPauseHandler( const PauseEventHandlerSharedPtr& rHandler );
    void removePauseHandler( const PauseEventHandlerSharedPtr& rHandler );
    
    /** Register a mouse handler that is called on mouse click
        
        For every mouse click, only one of the handlers
        registered here is called. The handlers are considered
        with decreasing priority, i.e. the handler with the
        currently highest priority will be called.
        
        Since the handlers can reject down and up events
        individually, handlers should expect to be called with
        non-matching down and up-press counts. If your handler
        cannot cope with that, it must have the highest
        priority of all added handlers.
    */
    void addClickHandler( const MouseEventHandlerSharedPtr& rHandler,
                          double                            nPriority );
    void removeClickHandler( const MouseEventHandlerSharedPtr& rHandler );
    
    /** Register a mouse handler that is called on a double
        mouse click
        
        For every mouse double click, only one of the handlers
        registered here is called. The handlers are considered
        with decreasing priority, i.e. the handler with the
        currently highest priority will be called.
        
        Since the handlers can reject down and up events
        individually, handlers should expect to be called with
        non-matching down and up-press counts. If your handler
        cannot cope with that, it must have the highest
        priority of all added handlers.
    */
    void addDoubleClickHandler( const MouseEventHandlerSharedPtr&   rHandler,
                                double                              nPriority );
    void removeDoubleClickHandler( const MouseEventHandlerSharedPtr& rHandler );
    
    /** Register a mouse handler that is called for mouse moves.
        
        For every mouse move, only one of the handlers
        registered here is called. The handlers are considered
        with decreasing priority, i.e. the handler with the
        currently highest priority will be called.
    */
    void addMouseMoveHandler( const MouseEventHandlerSharedPtr& rHandler,
                              double                            nPriority );
    void removeMouseMoveHandler( const MouseEventHandlerSharedPtr& rHandler );

    
    /** Registers a hyperlink click handler.

        For every hyperlink click, only one of the handlers registered
        here is called. The handlers are considered with decreasing
        priority, i.e. the handler with the currently highest priority
        will be called.

        @param rHandler
        @param nPriority
    */
    void addHyperlinkHandler( const HyperlinkHandlerSharedPtr& rHandler, 
                              double                           nPriority );
    void removeHyperlinkHandler( const HyperlinkHandlerSharedPtr& rHandler );
    
    
    // External event notifications
    // =========================================================
    
    /** View added.
        
        This method adds another view, which the show is
        displayed on. On every added view, the EventMultiplexer
        registers mouse and motion event listeners.
    */
    bool notifyViewAdded( const UnoViewSharedPtr& rView );
    
    /** View removed
        
        This method removes a view. Registered mouse and
        motion event listeners are revoked.
    */
    bool notifyViewRemoved( const UnoViewSharedPtr& rView );
    
    /** View changed
        
        This method announces a changed view to all view
        listeners. View changes include size and transformation.

        @param rView
        View that has changed
    */
    bool notifyViewChanged( const UnoViewSharedPtr& rView );
    
    /** View changed
        
        This method announces a changed view to all view
        listeners. View changes include size and transformation.

        @param xView
        View that has changed
    */
    bool notifyViewChanged( const ::com::sun::star::uno::Reference<
                               ::com::sun::star::presentation::XSlideShowView>& xView );

    /** All Views changed
        
        This method announces to all view listeners that
        <em>every</em> known view has changed. View changes include
        size and transformation.
    */
    bool notifyViewsChanged();
    
    /** View clobbered
        
        This method announces that the given view has been clobbered
        by something external to the slideshow, and needs an update.

        @param xView
        View that has been clobbered
    */
    bool notifyViewClobbered( const ::com::sun::star::uno::Reference<
                                 ::com::sun::star::presentation::XSlideShowView>& xView );

    /** New shape event listener added

        This method announces that the given listener was added for
        the specified shape.

        @return true, if at least one handler successfully processed
        the notification.
     */
    bool notifyShapeListenerAdded( const ::com::sun::star::uno::Reference<
                                      ::com::sun::star::presentation::XShapeEventListener>& xListener,
                                   const ::com::sun::star::uno::Reference<
                                      ::com::sun::star::drawing::XShape>&                   xShape );

    /** A shape event listener was removed

        This method announces that the given listener was removed for
        the specified shape.

        @return true, if at least one handler successfully processed
        the notification.
     */
    bool notifyShapeListenerRemoved( const ::com::sun::star::uno::Reference<
                                         ::com::sun::star::presentation::XShapeEventListener>& xListener,
                                     const ::com::sun::star::uno::Reference<
                                         ::com::sun::star::drawing::XShape>&                   xShape );

    /** A new shape cursor was set

        This method announces that the given cursor was set for the
        specified shape.

        @return true, if at least one handler successfully processed
        the notification.
     */
    bool notifyShapeCursorChange( const ::com::sun::star::uno::Reference<
                                     ::com::sun::star::drawing::XShape>&  xShape, 
                                  sal_Int16                               nPointerShape );

    /** Notify a new user paint color
        
        Sending this notification also implies that user paint is
        enabled. User paint denotes the feature to draw colored lines
        on top of the slide content.

        @return true, if this event was processed by
        anybody. If false is returned, no handler processed
        this event (and probably, nothing will happen at all)
    */
    bool notifyUserPaintColor( RGBColor const& rUserColor );

    /** Notify a new user paint width
         
         Sending this notification also implies that user paint is
         enabled. .
         
         @return true, if this event was processed by
         anybody. If false is returned, no handler processed
         this event (and probably, nothing will happen at all)
         */
    bool notifyUserPaintStrokeWidth( double rUserStrokeWidth );
      
    
	/** Notify a new user paint erase all ink mode
	 
	 Sending this notification also implies that user paint is
	 enabled. User paint denotes the feature to draw colored lines
	 on top of the slide content.
	 
	 @return true, if this event was processed by
	 anybody. If false is returned, no handler processed
	 this event (and probably, nothing will happen at all)
	 */
	bool notifyEraseAllInk( bool const& rEraseAllInk );
	bool notifySwitchPenMode();
	bool notifySwitchEraserMode();
	bool notifyEraseInkWidth( sal_Int32 rEraseInkSize );
    
    /** Notify that user paint is disabled
        
        User paint denotes the feature to draw colored lines on top of
        the slide content.

        @return true, if this event was processed by
        anybody. If false is returned, no handler processed
        this event (and probably, nothing will happen at all)
    */
    bool notifyUserPaintDisabled();

    /** Notify that the user requested the next effect.
        
        This requests the slideshow to display the next
        effect, or move to the next slide, if none are left.
        
        @return true, if this event was processed by
        anybody. If false is returned, no handler processed
        this event (and probably, nothing will happen at all)
    */
    bool notifyNextEffect();
    
    /** Notify that a new slide is about to be displayed              
    */
	bool notifySlideTransitionStarted();

    /** Notify that a new slide has started
        
        This method is to be used from the Presentation object
        to signal that a new slide is starting now. This will
        invoke all registered slide start handlers.
        
        @return true, if this event was processed by
        anybody. If false is returned, no handler processed
        this event (and probably, nothing will happen at all)
    */
    bool notifySlideStartEvent();
    
    /** Notify that a slide has ended
        
        This method is to be used from the Presentation object
        to signal that a slide is ending now. This will invoke
        all registered slide end handlers.
        
        @return true, if this event was processed by
        anybody. If false is returned, no handler processed
        this event (and probably, nothing will happen at all)
    */
    bool notifySlideEndEvent();
    
    /** Notify that the given node enters its active duration.
        
        This method is to be used from the AnimationNode
        objects to signal that the active duration
        begins. This will invoke all registered animation
        start handlers.
        
        @param rNode
        Node which enters active duration.
        
        @return true, if this event was processed by
        anybody. If false is returned, no handler processed
        this event (and probably, nothing will happen at all)
    */
    bool notifyAnimationStart( const boost::shared_ptr<AnimationNode>& rNode );
    
    /** Notify that the given node leaves its active duration.
        
        This method is to be used from the AnimationNode
        objects to signal that the active duration
        ends now. This will invoke all registered animation
        end handlers.
        
        @param rNode
        Node which leaves active duration.
        
        @return true, if this event was processed by
        anybody. If false is returned, no handler processed
        this event (and probably, nothing will happen at all)
    */
    bool notifyAnimationEnd( const boost::shared_ptr<AnimationNode>& rNode );
    
    /** Notify that the slide animations sequence leaves its
        active duration.
        
        @return true, if this event was processed by
        anybody. If false is returned, no handler processed
        this event (and probably, nothing will happen at all)
    */
    bool notifySlideAnimationsEnd();
    
    /** Notify that for the given node, audio output has stopped.
        
        This method is to be used from the AnimationNode
        objects to signal that audio playback has just
        stopped.  This will invoke all registered audio
        stopped andlers.
        
        @param rNode
        Node for which audio has stopped.
        
        @return true, if this event was processed by
        anybody. If false is returned, no handler processed
        this event (and probably, nothing will happen at all)
    */
    bool notifyAudioStopped( const boost::shared_ptr<AnimationNode>& rNode );
    
    /** Notify that the show has entered or exited pause mode
        
        This method is to be used from the Presentation object
        to signal that a slide is entering (bPauseShow=true)
        or exiting (bPauseShow=false) pause mode. This will
        invoke all registered slide end handlers.
        
        @return true, if this event was processed by
        anybody. If false is returned, no handler processed
        this event (and probably, nothing will happen at all)
    */
    bool notifyPauseMode( bool bPauseShow );
    
    /** Notify that all audio has to be stoped.
        
        This method is used by XCommand nodes and all sound
        playing nodes should listen for this command and
        stop theire sounds when its fired.
        
        @return true, if this event was processed by
        anybody. If false is returned, no handler processed
        this event (and probably, nothing will happen at all)
    */
    bool notifyCommandStopAudio( const boost::shared_ptr<AnimationNode>& rNode );

    /** Botifies that a hyperlink has been clicked.
    
        @return true, if this event was processed by
        anybody. If false is returned, no handler processed
        this event (and probably, nothing will happen at all)
    */
    bool notifyHyperlinkClicked( ::rtl::OUString const& hyperLink );
    
private:
    boost::scoped_ptr<EventMultiplexerImpl> mpImpl;
};

} // namespace internal
} // namespace Presentation

#endif /* INCLUDED_SLIDESHOW_EVENTMULTIPLEXER_HXX */