/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/


// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_slideshow.hxx"

#include <canvas/debug.hxx>
#include <basegfx/matrix/b2dhommatrix.hxx>
#include <basegfx/point/b2dpoint.hxx>
#include <basegfx/polygon/b2dpolygon.hxx>
#include <basegfx/matrix/b2dhommatrixtools.hxx>
#include "snakewipe.hxx"
#include "transitiontools.hxx"


namespace slideshow {
namespace internal {

SnakeWipe::SnakeWipe( sal_Int32 nElements, bool diagonal, bool flipOnYAxis )
    : m_sqrtElements( static_cast<sal_Int32>(
                          sqrt( static_cast<double>(nElements) ) ) ),
      m_elementEdge( 1.0 / m_sqrtElements ),
      m_diagonal(diagonal),
      m_flipOnYAxis(flipOnYAxis)
{
}

::basegfx::B2DPolyPolygon SnakeWipe::calcSnake( double t ) const
{
    ::basegfx::B2DPolyPolygon res;
    const double area = (t * m_sqrtElements * m_sqrtElements);
    const sal_Int32 line_ = (static_cast<sal_Int32>(area) / m_sqrtElements);
    const double line = ::basegfx::pruneScaleValue(
        static_cast<double>(line_) / m_sqrtElements );
    const double col = ::basegfx::pruneScaleValue(
        (area - (line_ * m_sqrtElements)) / m_sqrtElements );
    
    if (! ::basegfx::fTools::equalZero( line )) {
        ::basegfx::B2DPolygon poly;
        poly.append( ::basegfx::B2DPoint( 0.0, 0.0 ) );
        poly.append( ::basegfx::B2DPoint( 0.0, line ) );
        poly.append( ::basegfx::B2DPoint( 1.0, line ) );
        poly.append( ::basegfx::B2DPoint( 1.0, 0.0 ) );
        poly.setClosed(true);
        res.append(poly);
    }
    if (! ::basegfx::fTools::equalZero( col ))
    {
        double offset = 0.0;
        if ((line_ & 1) == 1) {
            // odd line: => right to left
            offset = (1.0 - col);
        }
        ::basegfx::B2DPolygon poly;
        poly.append( ::basegfx::B2DPoint( offset, line ) );
        poly.append( ::basegfx::B2DPoint( offset,
                                          line + m_elementEdge ) );
        poly.append( ::basegfx::B2DPoint( offset + col,
                                          line + m_elementEdge ) );
        poly.append( ::basegfx::B2DPoint( offset + col, line ) );
        poly.setClosed(true);
        res.append(poly);
    }
    
    return res;
}

::basegfx::B2DPolyPolygon SnakeWipe::calcHalfDiagonalSnake(
    double t, bool in ) const
{
    ::basegfx::B2DPolyPolygon res;
    
    if (in) {
        const double sqrtArea2 = sqrt( t * m_sqrtElements * m_sqrtElements );
        const double edge = ::basegfx::pruneScaleValue(
            static_cast<double>( static_cast<sal_Int32>(sqrtArea2) ) /
            m_sqrtElements );
        
        ::basegfx::B2DPolygon poly;
        if (! ::basegfx::fTools::equalZero( edge )) {
            poly.append( ::basegfx::B2DPoint( 0.0, 0.0 ) );
            poly.append( ::basegfx::B2DPoint( 0.0, edge ) );
            poly.append( ::basegfx::B2DPoint( edge, 0.0 ) );
            poly.setClosed(true);
            res.append(poly);
        }
        const double a = (M_SQRT1_2 / m_sqrtElements);
        const double d = (sqrtArea2 - static_cast<sal_Int32>(sqrtArea2));
        const double len = (t * M_SQRT2 * d);
        const double height = ::basegfx::pruneScaleValue( M_SQRT1_2 / m_sqrtElements );
        poly.clear();
        poly.append( ::basegfx::B2DPoint( 0.0, 0.0 ) );
        poly.append( ::basegfx::B2DPoint( 0.0, height ) );
        poly.append( ::basegfx::B2DPoint( len + a, height ) );
        poly.append( ::basegfx::B2DPoint( len + a, 0.0 ) );
        poly.setClosed(true);
        ::basegfx::B2DHomMatrix aTransform;
        
        if ((static_cast<sal_Int32>(sqrtArea2) & 1) == 1) 
        {
            // odd line
            aTransform = basegfx::tools::createRotateB2DHomMatrix(M_PI_2 + M_PI_4);
            aTransform.translate(edge + m_elementEdge, 0.0);
        }
        else 
        {
            aTransform = basegfx::tools::createTranslateB2DHomMatrix(-a, 0.0);
            aTransform.rotate( -M_PI_4 );
            aTransform.translate( 0.0, edge );
        }
        
        poly.transform( aTransform );
        res.append(poly);
    }
    else // out
    {
        const double sqrtArea2 = sqrt( t * m_sqrtElements * m_sqrtElements );
        const double edge = ::basegfx::pruneScaleValue(
            static_cast<double>( static_cast<sal_Int32>(sqrtArea2) ) /
            m_sqrtElements );
        
        ::basegfx::B2DPolygon poly;
        if (! ::basegfx::fTools::equalZero( edge )) {
            poly.append( ::basegfx::B2DPoint( 0.0, 1.0 ) );
            poly.append( ::basegfx::B2DPoint( edge, 1.0 ) );
            poly.append( ::basegfx::B2DPoint( 1.0, edge ) );
            poly.append( ::basegfx::B2DPoint( 1.0, 0.0 ) );
            poly.setClosed(true);
            res.append(poly);
        }
        const double a = (M_SQRT1_2 / m_sqrtElements);
        const double d = (sqrtArea2 - static_cast<sal_Int32>(sqrtArea2));
        const double len = ((1.0 - t) * M_SQRT2 * d);
        const double height = ::basegfx::pruneScaleValue( M_SQRT1_2 / m_sqrtElements );
        poly.clear();
        poly.append( ::basegfx::B2DPoint( 0.0, 0.0 ) );
        poly.append( ::basegfx::B2DPoint( 0.0, height ) );
        poly.append( ::basegfx::B2DPoint( len + a, height ) );
        poly.append( ::basegfx::B2DPoint( len + a, 0.0 ) );
        poly.setClosed(true);
        ::basegfx::B2DHomMatrix aTransform;
        
        if ((static_cast<sal_Int32>(sqrtArea2) & 1) == 1) 
        {
            // odd line
            aTransform = basegfx::tools::createTranslateB2DHomMatrix(0.0, -height);
            aTransform.rotate( M_PI_2 + M_PI_4 );
            aTransform.translate( 1.0, edge );
        }
        else 
        {
            aTransform = basegfx::tools::createRotateB2DHomMatrix(-M_PI_4);
            aTransform.translate( edge, 1.0 );
        }
        poly.transform( aTransform );
        res.append(poly);
    }
    
    return res;
}

::basegfx::B2DPolyPolygon SnakeWipe::operator () ( double t )
{
    ::basegfx::B2DPolyPolygon res;
    if (m_diagonal)
    {
        if (t >= 0.5) {
            res.append( calcHalfDiagonalSnake( 1.0, true ) );
            res.append( calcHalfDiagonalSnake( 2.0 * (t - 0.5), false ) );
        }
        else
            res.append( calcHalfDiagonalSnake( 2.0 * t, true ) );
    }
    else
        res = calcSnake(t);

    return m_flipOnYAxis ? flipOnYAxis(res) : res;
}

::basegfx::B2DPolyPolygon ParallelSnakesWipe::operator () ( double t )
{
    ::basegfx::B2DPolyPolygon res;
    if (m_diagonal)
    {
        OSL_ASSERT( m_opposite );
        ::basegfx::B2DPolyPolygon half(
            calcHalfDiagonalSnake( t, false /* out */ ) );
        // flip on x axis and rotate 90 degrees:
        basegfx::B2DHomMatrix aTransform(basegfx::tools::createScaleB2DHomMatrix(1.0, -1.0));
        aTransform.translate( -0.5, 0.5 );
        aTransform.rotate( M_PI_2 );
        aTransform.translate( 0.5, 0.5 );
        half.transform( aTransform );
        half.flip();
        res.append( half );

        // rotate 180 degrees:
        aTransform = basegfx::tools::createTranslateB2DHomMatrix(-0.5, -0.5);
        aTransform.rotate( M_PI );
        aTransform.translate( 0.5, 0.5 );
        half.transform( aTransform );
        res.append( half );
    }
    else
    {
        ::basegfx::B2DPolyPolygon half( calcSnake( t / 2.0 ) );
        // rotate 90 degrees:
        basegfx::B2DHomMatrix aTransform(basegfx::tools::createTranslateB2DHomMatrix(-0.5, -0.5));
        aTransform.rotate( M_PI_2 );
        aTransform.translate( 0.5, 0.5 );
        half.transform( aTransform );
        res.append( flipOnYAxis(half) );
        res.append( m_opposite ? flipOnXAxis(half) : half );
    }
        
    return m_flipOnYAxis ? flipOnYAxis(res) : res;
}

}
}