/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/


#ifndef INCLUDED_unotools_VIEWOPTIONS_HXX
#define INCLUDED_unotools_VIEWOPTIONS_HXX

//_________________________________________________________________________________________________________________
//	includes
//_________________________________________________________________________________________________________________

#include "unotools/unotoolsdllapi.h"
#include <com/sun/star/uno/Sequence.hxx>
#include <com/sun/star/beans/NamedValue.hpp>
#include <unotools/configmgr.hxx>
#include <unotools/configitem.hxx>
#include <sal/types.h>
#include <osl/mutex.hxx>
#include <rtl/ustring.hxx>
#include <unotools/options.hxx>

//_________________________________________________________________________________________________________________
//	forward declarations
//_________________________________________________________________________________________________________________

class SvtViewOptionsBase_Impl;

//_________________________________________________________________________________________________________________
//	declarations
//_________________________________________________________________________________________________________________

/*-************************************************************************************************************//**
	@descr			Use these enum values to specify right list in configuration in which your view data are saved.
*//*-*************************************************************************************************************/

enum EViewType
{
	E_DIALOG	=	0,
	E_TABDIALOG	=	1,
	E_TABPAGE	=	2,
	E_WINDOW	=	3
};

/*-************************************************************************************************************//**
	@short			collect informations about view features
	@descr          We support different basetypes of views like dialogs, tab-dialogs, tab-pages and normal windows.
					You must specify your basetype by using right enum value and must give us a valid name for your
					subkey in registry! We support some fix features for some bastypes and user data as string for all!
					see also configuration package "org.openoffice.Office.Views/..." for further informations.

					template of configuration:
						DialogType
                            /WindowState    [string]
                            /UserData       [set of any scalar types]
						TabDialogType
                            /WindowState    [string]
                            /UserData       [set of any scalar types]
                            /PageID         [int]
						TabPageType
                            /WindowState    [string]
                            /UserData       [set of any scalar types]
						WindowType
                            /WindowState    [string]
                            /UserData       [set of any scalar types]
                            /Visible        [boolean]

					structure of configuration:

						org.openoffice.Office.Views	[package]
													/Dialogs	[set]
																/Dialog_FileOpen			[DialogType]
																/Dialog_ImportGraphics		[DialogType]
																...
																/Dialog_<YourName>			[DialogType]

													/TabDialogs	[set]
																/TabDialog_001				[TabDialogType]
																/TabDialog_Blubber			[TabDialogType]
																...
																/TabDialog_<YourName>		[TabDialogType]

													/TabPages	[set]
																/TabPage_XXX				[TabPageType]
																/TabPage_Date				[TabPageType]
																...
																/TabPage_<YourName>			[TabPageType]

													/Windows	[set]
																/Window_User				[WindowType]
																/Window_Options				[WindowType]
																...
																/Window_<YourName>			[WindowType]

	@implements		-
	@base			-

	@devstatus		ready to use
*//*-*************************************************************************************************************/

class UNOTOOLS_DLLPUBLIC SvtViewOptions: public utl::detail::Options
{
    /*
    #ifdef TF_OLDVIEW
    public:
        void                                                                        GetPosition     (       sal_Int32&                                                                  nX              ,
                                                                                                            sal_Int32&                                                                  nY              ) const;
        void                                                                        SetPosition     (       sal_Int32                                                                   nX              ,
                                                                                                            sal_Int32                                                                   nY              );
        void                                                                        GetSize         (       sal_Int32&                                                                  nWidth          ,
                                                                                                            sal_Int32&                                                                  nHeight         ) const;
        void                                                                        SetSize         (       sal_Int32                                                                   nWidth          ,
                                                                                                            sal_Int32                                                                   nHeight         );
        ::rtl::OUString                                                             GetUserData     (                                                                                                   ) const;
        void                                                                        SetUserData     ( const ::rtl::OUString&                                                            sData           );
        static ::com::sun::star::uno::Sequence< ::rtl::OUString >                   SeperateUserData( const ::rtl::OUString&                                                            sData           ,
                                                                                                            sal_Unicode                                                                 cSeperator=';'  );
        static ::rtl::OUString                                                      GenerateUserData( const ::com::sun::star::uno::Sequence< ::rtl::OUString >&                         seqData         ,
                                                                                                            sal_Unicode                                                                 cSeperator=';'  );
        ::com::sun::star::uno::Sequence< ::com::sun::star::beans::PropertyValue >   GetAnyData      (                                                                                                   ) const;
        void                                                                        SetAnyData      ( const ::com::sun::star::uno::Sequence< ::com::sun::star::beans::PropertyValue >&  lData           );
    #endif
    */

	//-------------------------------------------------------------------------------------------------------------
	//	public methods
	//-------------------------------------------------------------------------------------------------------------

	public:

		//---------------------------------------------------------------------------------------------------------
		//	constructor / destructor
		//---------------------------------------------------------------------------------------------------------

		/*-****************************************************************************************************//**
			@short		standard constructor and destructor
			@descr		This will de-/initialize an instance with default values.
						You must give us the basic type of your view and a name which specify right entry
						in dynamical configuration list. If entry not exist, we create a new one!

			@seealso	enum EViewType

			@param		"eType" specify type of your view and is used to use right data container!
			@param		"sViewName" specify the name of your view and is the key name in data list too.
			@return		-

			@onerror	An assertion is thrown in debug version. Otherwise we do nothing!
		*//*-*****************************************************************************************************/

         SvtViewOptions(       EViewType        eType     ,
                         const ::rtl::OUString& sViewName );
        virtual ~SvtViewOptions();

		/*-****************************************************************************************************//**
            @short      support preload of these config item
            @descr      Sometimes we need preloading of these configuration data without real using of it.

            @seealso    -

            @param      -
			@return		-

            @onerror    -
		*//*-*****************************************************************************************************/

        static void AcquireOptions();
        static void ReleaseOptions();

		//---------------------------------------------------------------------------------------------------------
		//	interface
		//---------------------------------------------------------------------------------------------------------

		/*-****************************************************************************************************//**
			@short		use it to get information about existing entries in configuration
			@descr		The methods to set/get the position or size will create a new entry automatically if
						it not already exist and work with default values!
						If this a problem for you - you MUST call these method before and
						you must make up your own mind about that.

            @seealso    -

			@onerror	No error should occur.
		*//*-*****************************************************************************************************/

		sal_Bool Exists() const;

		/*-****************************************************************************************************//**
			@short		use it to delete an entry of dynamic view set
			@descr		You can use this method to delete anexisting node in configuration.
						But if you call a Set- or Get- method again on this instance
						the item is created again! If you do nothing after this call
						your view will die relay in configuration ...

			@seealso	method Exist()

			@return		True if delete OK, False otherwise.

			@onerror	We return sal_False.
		*//*-*****************************************************************************************************/

		sal_Bool Delete();

		/*-****************************************************************************************************//**
            @short      use it to set/get the window state of your view
            @descr      These value describe position/size and some other states of a window.
                        Use it with right vcl methods directly. Normaly it's not necessary to
                        parse given string!

            @seealso    vcl methods

            @onerror    -
		*//*-*****************************************************************************************************/

        ::rtl::OUString GetWindowState(                               ) const;
        void            SetWindowState( const ::rtl::OUString& sState );

		/*-****************************************************************************************************//**
			@short		use it to set/get the page number which was the last active one
			@descr		It's only supported for:	- tab-dialogs
						If you call it for other ones you will get an assertion in debug version.
						In a product version we do nothing!

			@seealso	-

			@onerror	An assertion is thrown in debug version. Otherwise we do nothing!
		*//*-*****************************************************************************************************/

        sal_Int32 GetPageID(               ) const;
        void      SetPageID( sal_Int32 nID );

		/*-****************************************************************************************************//**
			@short		use it to set/get the visual state of a window
			@descr		It's only supported for:	- windows
						If you call it for other ones you will get an assertion in debug version.
						In a product version we do nothing!

			@seealso	-

			@onerror	An assertion is thrown in debug version. Otherwise we do nothing!
		*//*-*****************************************************************************************************/

        sal_Bool IsVisible (                 ) const;
        void     SetVisible( sal_Bool bState );

		/*-****************************************************************************************************//**
			@short		use it to set/get the extended user data (consisting of a set of named scalar values)
			@descr		It's supported for ALL types!
						Every view can handle its own user defined data set.

            @seealso    -

			@onerror	In the non-product version, an assertion is made. In a product version, errors are silently ignored.
		*//*-*****************************************************************************************************/
/*
#ifdef TF_OLDVIEW
        ::com::sun::star::uno::Sequence< ::com::sun::star::beans::NamedValue > GetUserData( sal_Bool bMakeItDifferent ) const;
#else
*/
        ::com::sun::star::uno::Sequence< ::com::sun::star::beans::NamedValue > GetUserData(                                                                                     ) const;
//#endif
        void                                                                   SetUserData( const ::com::sun::star::uno::Sequence< ::com::sun::star::beans::NamedValue >& lData );

		/*-****************************************************************************************************//**
            @short      use it to set/get ONE special user data item directly
            @descr      Normaly you can work on full user data list by using "Set/GetUserData()".
                        With this function you have an access on special list entries directly without any

            @seealso    -

			@onerror	In the non-product version, an assertion is made. In a product version, errors are silently ignored.
		*//*-*****************************************************************************************************/

        ::com::sun::star::uno::Any GetUserItem( const ::rtl::OUString&            sName  ) const;
        void                       SetUserItem( const ::rtl::OUString&            sName  ,
                                                const ::com::sun::star::uno::Any& aValue );

	//-------------------------------------------------------------------------------------------------------------
	//	private methods
	//-------------------------------------------------------------------------------------------------------------

    private:

		/*-****************************************************************************************************//**
			@short		return a reference to a static mutex
			@descr		These class is threadsafe.
						We create a static mutex only for one time and use it to protect our refcount and container
						member!

			@seealso	-

			@param		-
			@return		A reference to a static mutex member.

			@onerror	-
		*//*-*****************************************************************************************************/

        UNOTOOLS_DLLPRIVATE static ::osl::Mutex& GetOwnStaticMutex();

	//-------------------------------------------------------------------------------------------------------------
	//	private member
	//-------------------------------------------------------------------------------------------------------------

	private:

		/// specify which list of views in configuration is used! This can't be a static value!!!
		/// ... because we need this value to work with right static data container.
		EViewType			m_eViewType		;
		::rtl::OUString		m_sViewName		;

		/// - impl. data container as dynamic pointer for smaller memory requirements!
		/// - internal ref count mechanism

		/*Attention

			Don't initialize these static member in these header!
			a) Double defined symbols will be detected ...
			b) and unresolved externals exist at linking time.
			Do it in your source only.
		 */

        static SvtViewOptionsBase_Impl*    m_pDataContainer_Dialogs    ;   /// hold data for all dialogs
        static sal_Int32                   m_nRefCount_Dialogs         ;
        static SvtViewOptionsBase_Impl*    m_pDataContainer_TabDialogs ;   /// hold data for all tab-dialogs
        static sal_Int32                   m_nRefCount_TabDialogs      ;
        static SvtViewOptionsBase_Impl*    m_pDataContainer_TabPages   ;   /// hold data for all tab-pages
        static sal_Int32                   m_nRefCount_TabPages        ;
        static SvtViewOptionsBase_Impl*    m_pDataContainer_Windows    ;   /// hold data for all windows
        static sal_Int32                   m_nRefCount_Windows         ;

};		// class SvtViewOptions

#endif  // #ifndef INCLUDED_unotools_VIEWOPTIONS_HXX