<?xml version="1.0" encoding="UTF-8" ?>
<!--
  Licensed to the Apache Software Foundation (ASF) under one
  or more contributor license agreements.  See the NOTICE file
  distributed with this work for additional information
  regarding copyright ownership.  The ASF licenses this file
  to you under the Apache License, Version 2.0 (the
  "License"); you may not use this file except in compliance
  with the License.  You may obtain a copy of the License at
  
      http://www.apache.org/licenses/LICENSE-2.0
    	  
  Unless required by applicable law or agreed to in writing,
  software distributed under the License is distributed on an
  "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
  KIND, either express or implied.  See the License for the
  specific language governing permissions and limitations
  under the License.
  
-->
<config 
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
    xsi:noNamespaceSchemaLocation="config.xsd">

<!-- URL/IP to use for the Server for RTMP and RTMPT traffic.
    If this value is empty it will try to connect to the 
    domain-name the OpenMeetings-Client has been loading from
    
    Can be either and IP or a domain name. 
    For example: 
    <rtmphostlocal>192.168.254.182</rtmphostlocal>
    or
    <rtmphostlocal>mysubdomain.streaming.to</rtmphostlocal>
    -->
<rtmphostlocal></rtmphostlocal>

<!-- URL/IP to use for the Server for HTTP and HTTPS traffic.
    If this value is empty it will use the rtmphostlocal 
    variable (and in that way try to connect to the 
    domain-name the OpenMeetings-Client has been loading from)
    -->
<httphostlocal></httphostlocal>

<!--  
Port to use for the Server
To this port the default server lookup is done

You can find all this configuration in your red5-Config in: $RED5_HOME/conf/red5.properties
 -->
<rtmpport>1935</rtmpport>

<!-- 
Port to use for the Server
To this port the fallback is done once the default rtmport failed
this should workaround 99% of all firewalls
 -->
<rtmpTunnelport>5080</rtmpTunnelport>

<rtmpsslport>443</rtmpsslport>
<!--
Wether it should try to connect to rtmps first or not
Valid values: yes / no

NOTE: The OSx and Linux Flash Player are NOT able to connect via rtmps
The support for Windows is experimental
 -->
<useSSL>no</useSSL>

<!-- 
Port to use for the Server
This port is used to connect to the http-servlet
of the red5-servlet
 -->
<red5httpport>5080</red5httpport>

<!--
    The protocol to use for the http connections
    for example upload/download of files 
 -->
<protocol>http</protocol>

<!--
    The setting for the NetConnection
    default settings is "none"
    set to value "best" if you are trying to use rtmp over native SSL
    see: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/NetConnection.html#proxyType
 -->
<proxyType>none</proxyType>
	
<!--
    Name of the Application
    this is the Top-Icon Name of the Application
 -->    
<currentappname>Apache OpenMeetings</currentappname>    
    
<!-- 
    URL to the Home of the Application
    this is the URL which is used if you click on the Top-icon
-->    
<currentappnameurl>http://openmeetings.apache.org</currentappnameurl>        

<!-- 
    Should APP name and/or logo be displayed
-->    
<appdisplay>
	<displayelement name="logo" display="true" x="5" y="5"/>
	<displayelement name="name" display="true" x="140" y="10"/>
</appdisplay>

<!--
    URL to Bugs/Support
    this is the URL which is used if you click on *report a bug*
 -->
<currentappnamebugurl>https://issues.apache.org/jira/browse/OPENMEETINGS</currentappnamebugurl>   
        
<!--
    Video-Settings
    
    Number that specifies the amount of sound required to activate the microphone 
	Acceptable values from 0 to 100.	
    this value is used in Audio_Streaming, at which the *activity-meter* will
    send a notification for all connected hosts of a conference
    the result of this notification is that you see the green-light highlighted if
    a remote user is speaking
 -->
<loudnessAcitviation>0</loudnessAcitviation>  
    
<!--
    OpenMeetings-Webapp Name
    This is the name of the WebApp the Client will try to connect
    in former versions (till 0.5 Beta7) the name was xmlcrm
    the same param kann be find in the webapp in the Red5-Webapp
    red5-web.properties
    web.xml
 -->
<webAppRootKey>openmeetings</webAppRootKey>  

<!--
    We need this additional ROOT-Key as we have to deploy the application 
    as Global Contex Root. 
    
    If the rtmpt issues is solved sothat several Webapps can use different RTMPT connection
    we might change this value again to its origin / webapp-context

 -->
<httpRootKey>/openmeetings/</httpRootKey>  
    
<!--
    Window-Effect Settings
    showWindowEffect-values:
    y = yes
    n = no
    showWindowEffectOpacity-values
    between 0 and 1
 -->
<showWindowEffect>n</showWindowEffect> 

<!--
    Show the recorder buttons in the Conference Rooms
    visible = yes
    hidden = no
 -->	
<showRecording>hidden</showRecording>

<!--
    
	To enable the modern whiteboard Panel you need to switch this to y
    old menu bar is not active any more
    
<showmodernWhiteBoard>y</showmodernWhiteBoard>    
 -->    
	
<!--
	First day in the Week used by the Calendar
	0 means Sunday
	1 means Monday
	this is the way how the calendar UI shows a week
-->
<firstdayinweek>0</firstdayinweek>	
    
    
<!--
    #############################################################################
    Audio and Video Settings
    Before you change settings here,
    you should first Play and learn how the Settings work in the Documentation:
    http://code.google.com/p/openmeetings/wiki/AudioVideoTestingApplication
    #############################################################################
 -->
 
<!-- Camera Settings for codecType

    codecType possible values:
    h263
    h264
    If you want to use red5sip, set value to "h264"
 -->
<codecType>h264</codecType>
    
<!-- Camera Settings for the FramesPerSecond
    
    fps:Number [optional] - The requested rate at which the camera should capture 
    data, in frames per second. The default value is 15.
 -->    
<framesPerSecond>30</framesPerSecond>
    
    
<!-- Camera Settings for the Bandwidth:
    
    bandwidth:Number [optional] - An integer that specifies the maximum amount 
    of bandwidth that the current outgoing video feed can use, in bytes per second. 
    To specify that Flash video can use as much bandwidth as needed to maintain 
    the value of frameQuality, pass 0 for bandwidth. The default value is 16384.
 -->
<!-- These are the settings for the Quality-Modus *normal*
    The Quality-Modus can be chosen in the Login-Box --> 
<bandwidthNeededNormal>16384</bandwidthNeededNormal>    
<!-- These are the settings for the Quality-Modus *best* -->    
<bandwidthNeededBest>0</bandwidthNeededBest>
    
    
<!-- Camera Settings for the Quality
    
    quality:Number [optional] - An integer that specifies the required level of 
    picture quality, as determined by the amount of compression being applied to 
    each video frame. Acceptable values range from 1 (lowest quality, maximum 
    compression) to 100 (highest quality, no compression). To specify that picture 
    quality can vary as needed to avoid exceeding bandwidth, pass 0 for quality. 
    The default value is 0.
 --> 
<!-- These are the settings for the Quality-Modus *normal* -->  
<camQualityNormal>85</camQualityNormal>     
<!-- These are the settings for the Quality-Modus *best* -->       
<camQualityBest>90</camQualityBest> 
    
    
<!-- Microphone Settings for the Rate:
    
    rate:Number - 
    The rate at which the microphone should capture sound, in kHz. 
    Acceptable values are 5, 8, 11, 22, and 44. 
    The default value is 8 kHz if your sound capture 
    device supports this value. Otherwise, the default value 
    is the next available capture level above 8 kHz that your sound 
    capture device supports, usually 11 kHz.
 -->
<!-- Microphone Settings Quality-Modus -->
<microphoneRateBest>22</microphoneRateBest>

<!-- AEC configuration value
Specifies the echo path length (in milliseconds). A longer echo path means better 
echo cancellation but also introduces longer delays and requires more processing power. 
The default value is 128; the only other possible value is 256.
To disable AEC please specify 0.
 -->
<echoPath>128</echoPath>

<!--
    Set "true" or "false" to enable/disable microphone echo suppression
 -->
<echoSuppression>true</echoSuppression>

<!--
    The Size of the Whiteboard
    The Whiteboard has scrollbars so you may increase the size without problems
 -->
<defaultWhiteboardWidth>2400</defaultWhiteboardWidth>  
<defaultWhiteboardHeight>1200</defaultWhiteboardHeight>  

<!-- Available Configurations -->

<availableCameraResolutions>
    <resolution type="4:3 (~6 KByte/sec)" width="40" height="30" isDefault="false" />
    <resolution type="4:3 (~12 KByte/sec)" width="80" height="60" isDefault="false" />
    <resolution type="4:3 (~20 KByte/sec)" width="120" height="90" isDefault="true" />
    <resolution type="QQVGA 4:3 (~36 KByte/sec)" width="160" height="120" isDefault="false" />
    <resolution type="4:3 (~40 KByte/sec)" width="240" height="180" isDefault="false" />
    <resolution type="HVGA 4:3 (~56 KByte/sec)" width="320" height="240" isDefault="false" />
    <resolution type="4:3  (~60 KByte/sec)" width="480" height="360" isDefault="false" />
    <resolution type="4:3 (~68 KByte/sec)" width="640" height="480" isDefault="false" />
    <resolution type="XGA 4:3" width="1024" height="768" isDefault="false" />
    <resolution type="16:9" width="256" height="150" isDefault="false" />
    <resolution type="WQVGA 9:5" width="432" height="240" isDefault="false" />
    <resolution type="pseudo 16:9" width="480" height="234" isDefault="false" />
    <resolution type="16:9" width="512" height="300" isDefault="false" />
    <resolution type="nHD 16:9" width="640" height="360" isDefault="false" />
    <resolution type="16:9" width="1024" height="600" isDefault="false" />
</availableCameraResolutions>
    
 
<!-- Module Configuration -->
<!-- #############################################
    Admin Modules
  -->   
    
<adminModuleUser>userAdmin</adminModuleUser>

<adminModuleRoom>roomAdmin</adminModuleRoom>

<adminModuleOrg>orgAdmin</adminModuleOrg>

<adminModuleLanguages>languagesEditor</adminModuleLanguages>

<adminModuleConnections>roomClient</adminModuleConnections>

<adminModuleConfiguration>confAdmin</adminModuleConfiguration>

<adminModuleBackup>backupContent</adminModuleBackup>

<adminModuleLDAP>ldapAdmin</adminModuleLDAP>

<adminModuleServers>serversAdmin</adminModuleServers>
<!-- #############################################
    Moderator Modules
 -->

<moderatorModuleUser>userModerate</moderatorModuleUser>

<moderatorModuleRoom>roomModerate</moderatorModuleRoom>


<!-- #############################################
    Dashboard Modules
 -->

<dashboardModuleStartScreen>mainDashboard</dashboardModuleStartScreen>

<dashboardModuleCalendar>lzCalendar</dashboardModuleCalendar>


<!-- Conference Room Modules -->

<conferenceModuleRoomList>allmeetings</conferenceModuleRoomList>


<!-- #############################################
    Conference Room
    
    Room Layout's: flexibleConferenceRoom,conferenceView
 -->

<conferenceRoomModule>flexibleConferenceRoom</conferenceRoomModule>

<!-- #############################################
    Event Room
    
    Room Layouts: flexibleRestrictedConferenceRoom,restrictedConferenceRoom
 -->
<restrictedRoomModule>restrictedConferenceRoom</restrictedRoomModule>

<!-- #############################################
    Interview Room
    
    Room Layouts: interviewConferenceRoom
 -->
<interviewRoomModule>interviewConferenceRoom</interviewRoomModule>

<!-- #############################################
    Event Room Modules
 -->

<recordModule>lzRecordContent</recordModule>

<!-- #############################################
    Profiles Panel Modules
 -->

<userSettingsModule>userSettings</userSettingsModule>
        
</config>