| /**************************************************************************** |
| * arch/arm/src/a1x/hardware/a1x_uart.h |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. The |
| * ASF licenses this file to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| * License for the specific language governing permissions and limitations |
| * under the License. |
| * |
| ****************************************************************************/ |
| |
| #ifndef __ARCH_ARM_SRC_A1X_HARDWARE_A1X_UART_H |
| #define __ARCH_ARM_SRC_A1X_HARDWARE_A1X_UART_H |
| |
| /**************************************************************************** |
| * Included Files |
| ****************************************************************************/ |
| |
| #include <nuttx/config.h> |
| #include "hardware/a1x_memorymap.h" |
| |
| /**************************************************************************** |
| * Pre-processor Definitions |
| ****************************************************************************/ |
| |
| /* Register offsets *********************************************************/ |
| |
| #define A1X_UART_RBR_OFFSET 0x0000 /* UART Receive Buffer Register */ |
| #define A1X_UART_THR_OFFSET 0x0000 /* UART Transmit Holding Register */ |
| #define A1X_UART_DLL_OFFSET 0x0000 /* UART Divisor Latch Low Register */ |
| #define A1X_UART_DLH_OFFSET 0x0004 /* UART Divisor Latch High Register */ |
| #define A1X_UART_IER_OFFSET 0x0004 /* UART Interrupt Enable Register */ |
| #define A1X_UART_IIR_OFFSET 0x0008 /* UART Interrupt Identity Register */ |
| #define A1X_UART_FCR_OFFSET 0x0008 /* UART FIFO Control Register */ |
| #define A1X_UART_LCR_OFFSET 0x000c /* UART Line Control Register */ |
| #define A1X_UART_MCR_OFFSET 0x0010 /* UART Modem Control Register */ |
| #define A1X_UART_LSR_OFFSET 0x0014 /* UART Line Status Register */ |
| #define A1X_UART_MSR_OFFSET 0x0018 /* UART Modem Status Register */ |
| #define A1X_UART_SCH_OFFSET 0x001c /* UART Scratch Register */ |
| #define A1X_UART_USR_OFFSET 0x007c /* UART Status Register */ |
| #define A1X_UART_TFL_OFFSET 0x0080 /* UART Transmit FIFO Level */ |
| #define A1X_UART_RFL_OFFSET 0x0084 /* UART Receive FIFO Level */ |
| #define A1X_UART_HALT_OFFSET 0x00a4 /* UART Halt TX Register */ |
| |
| /* Register virtual addresses ***********************************************/ |
| |
| #define A1X_UART_RBR(n) (A1X_UART_VADDR(n)+A1X_UART_RBR_OFFSET) |
| #define A1X_UART_THR(n) (A1X_UART_VADDR(n)+A1X_UART_THR_OFFSET) |
| #define A1X_UART_DLL(n) (A1X_UART_VADDR(n)+A1X_UART_DLL_OFFSET) |
| #define A1X_UART_DLH(n) (A1X_UART_VADDR(n)+A1X_UART_DLH_OFFSET) |
| #define A1X_UART_IER(n) (A1X_UART_VADDR(n)+A1X_UART_IER_OFFSET) |
| #define A1X_UART_IIR(n) (A1X_UART_VADDR(n)+A1X_UART_IIR_OFFSET) |
| #define A1X_UART_FCR(n) (A1X_UART_VADDR(n)+A1X_UART_FCR_OFFSET) |
| #define A1X_UART_LCR(n) (A1X_UART_VADDR(n)+A1X_UART_LCR_OFFSET) |
| #define A1X_UART_MCR(n) (A1X_UART_VADDR(n)+A1X_UART_MCR_OFFSET) |
| #define A1X_UART_LSR(n) (A1X_UART_VADDR(n)+A1X_UART_LSR_OFFSET) |
| #define A1X_UART_MSR(n) (A1X_UART_VADDR(n)+A1X_UART_MSR_OFFSET) |
| #define A1X_UART_SCH(n) (A1X_UART_VADDR(n)+A1X_UART_SCH_OFFSET) |
| #define A1X_UART_USR(n) (A1X_UART_VADDR(n)+A1X_UART_USR_OFFSET) |
| #define A1X_UART_TFL(n) (A1X_UART_VADDR(n)+A1X_UART_TFL_OFFSET) |
| #define A1X_UART_RFL(n) (A1X_UART_VADDR(n)+A1X_UART_RFL_OFFSET) |
| #define A1X_UART_HALT(n) (A1X_UART_VADDR(n)+A1X_UART_HALT_OFFSET) |
| |
| #define A1X_UART0_RBR (A1X_UART0_VADDR+A1X_UART_RBR_OFFSET) |
| #define A1X_UART0_THR (A1X_UART0_VADDR+A1X_UART_THR_OFFSET) |
| #define A1X_UART0_DLL (A1X_UART0_VADDR+A1X_UART_DLL_OFFSET) |
| #define A1X_UART0_DLH (A1X_UART0_VADDR+A1X_UART_DLH_OFFSET) |
| #define A1X_UART0_IER (A1X_UART0_VADDR+A1X_UART_IER_OFFSET) |
| #define A1X_UART0_IIR (A1X_UART0_VADDR+A1X_UART_IIR_OFFSET) |
| #define A1X_UART0_FCR (A1X_UART0_VADDR+A1X_UART_FCR_OFFSET) |
| #define A1X_UART0_LCR (A1X_UART0_VADDR+A1X_UART_LCR_OFFSET) |
| #define A1X_UART0_MCR (A1X_UART0_VADDR+A1X_UART_MCR_OFFSET) |
| #define A1X_UART0_LSR (A1X_UART0_VADDR+A1X_UART_LSR_OFFSET) |
| #define A1X_UART0_MSR (A1X_UART0_VADDR+A1X_UART_MSR_OFFSET) |
| #define A1X_UART0_SCH (A1X_UART0_VADDR+A1X_UART_SCH_OFFSET) |
| #define A1X_UART0_USR (A1X_UART0_VADDR+A1X_UART_USR_OFFSET) |
| #define A1X_UART0_TFL (A1X_UART0_VADDR+A1X_UART_TFL_OFFSET) |
| #define A1X_UART0_RFL (A1X_UART0_VADDR+A1X_UART_RFL_OFFSET) |
| #define A1X_UART0_HALT (A1X_UART0_VADDR+A1X_UART_HALT_OFFSET) |
| |
| #define A1X_UART1_RBR (A1X_UART1_VADDR+A1X_UART_RBR_OFFSET) |
| #define A1X_UART1_THR (A1X_UART1_VADDR+A1X_UART_THR_OFFSET) |
| #define A1X_UART1_DLL (A1X_UART1_VADDR+A1X_UART_DLL_OFFSET) |
| #define A1X_UART1_DLH (A1X_UART1_VADDR+A1X_UART_DLH_OFFSET) |
| #define A1X_UART1_IER (A1X_UART1_VADDR+A1X_UART_IER_OFFSET) |
| #define A1X_UART1_IIR (A1X_UART1_VADDR+A1X_UART_IIR_OFFSET) |
| #define A1X_UART1_FCR (A1X_UART1_VADDR+A1X_UART_FCR_OFFSET) |
| #define A1X_UART1_LCR (A1X_UART1_VADDR+A1X_UART_LCR_OFFSET) |
| #define A1X_UART1_MCR (A1X_UART1_VADDR+A1X_UART_MCR_OFFSET) |
| #define A1X_UART1_LSR (A1X_UART1_VADDR+A1X_UART_LSR_OFFSET) |
| #define A1X_UART1_MSR (A1X_UART1_VADDR+A1X_UART_MSR_OFFSET) |
| #define A1X_UART1_SCH (A1X_UART1_VADDR+A1X_UART_SCH_OFFSET) |
| #define A1X_UART1_USR (A1X_UART1_VADDR+A1X_UART_USR_OFFSET) |
| #define A1X_UART1_TFL (A1X_UART1_VADDR+A1X_UART_TFL_OFFSET) |
| #define A1X_UART1_RFL (A1X_UART1_VADDR+A1X_UART_RFL_OFFSET) |
| #define A1X_UART1_HALT (A1X_UART1_VADDR+A1X_UART_HALT_OFFSET) |
| |
| #define A1X_UART2_RBR (A1X_UART2_VADDR+A1X_UART_RBR_OFFSET) |
| #define A1X_UART2_THR (A1X_UART2_VADDR+A1X_UART_THR_OFFSET) |
| #define A1X_UART2_DLL (A1X_UART2_VADDR+A1X_UART_DLL_OFFSET) |
| #define A1X_UART2_DLH (A1X_UART2_VADDR+A1X_UART_DLH_OFFSET) |
| #define A1X_UART2_IER (A1X_UART2_VADDR+A1X_UART_IER_OFFSET) |
| #define A1X_UART2_IIR (A1X_UART2_VADDR+A1X_UART_IIR_OFFSET) |
| #define A1X_UART2_FCR (A1X_UART2_VADDR+A1X_UART_FCR_OFFSET) |
| #define A1X_UART2_LCR (A1X_UART2_VADDR+A1X_UART_LCR_OFFSET) |
| #define A1X_UART2_MCR (A1X_UART2_VADDR+A1X_UART_MCR_OFFSET) |
| #define A1X_UART2_LSR (A1X_UART2_VADDR+A1X_UART_LSR_OFFSET) |
| #define A1X_UART2_MSR (A1X_UART2_VADDR+A1X_UART_MSR_OFFSET) |
| #define A1X_UART2_SCH (A1X_UART2_VADDR+A1X_UART_SCH_OFFSET) |
| #define A1X_UART2_USR (A1X_UART2_VADDR+A1X_UART_USR_OFFSET) |
| #define A1X_UART2_TFL (A1X_UART2_VADDR+A1X_UART_TFL_OFFSET) |
| #define A1X_UART2_RFL (A1X_UART2_VADDR+A1X_UART_RFL_OFFSET) |
| #define A1X_UART2_HALT (A1X_UART2_VADDR+A1X_UART_HALT_OFFSET) |
| |
| #define A1X_UART3_RBR (A1X_UART3_VADDR+A1X_UART_RBR_OFFSET) |
| #define A1X_UART3_THR (A1X_UART3_VADDR+A1X_UART_THR_OFFSET) |
| #define A1X_UART3_DLL (A1X_UART3_VADDR+A1X_UART_DLL_OFFSET) |
| #define A1X_UART3_DLH (A1X_UART3_VADDR+A1X_UART_DLH_OFFSET) |
| #define A1X_UART3_IER (A1X_UART3_VADDR+A1X_UART_IER_OFFSET) |
| #define A1X_UART3_IIR (A1X_UART3_VADDR+A1X_UART_IIR_OFFSET) |
| #define A1X_UART3_FCR (A1X_UART3_VADDR+A1X_UART_FCR_OFFSET) |
| #define A1X_UART3_LCR (A1X_UART3_VADDR+A1X_UART_LCR_OFFSET) |
| #define A1X_UART3_MCR (A1X_UART3_VADDR+A1X_UART_MCR_OFFSET) |
| #define A1X_UART3_LSR (A1X_UART3_VADDR+A1X_UART_LSR_OFFSET) |
| #define A1X_UART3_MSR (A1X_UART3_VADDR+A1X_UART_MSR_OFFSET) |
| #define A1X_UART3_SCH (A1X_UART3_VADDR+A1X_UART_SCH_OFFSET) |
| #define A1X_UART3_USR (A1X_UART3_VADDR+A1X_UART_USR_OFFSET) |
| #define A1X_UART3_TFL (A1X_UART3_VADDR+A1X_UART_TFL_OFFSET) |
| #define A1X_UART3_RFL (A1X_UART3_VADDR+A1X_UART_RFL_OFFSET) |
| #define A1X_UART3_HALT (A1X_UART3_VADDR+A1X_UART_HALT_OFFSET) |
| |
| #define A1X_UART4_RBR (A1X_UART4_VADDR+A1X_UART_RBR_OFFSET) |
| #define A1X_UART4_THR (A1X_UART4_VADDR+A1X_UART_THR_OFFSET) |
| #define A1X_UART4_DLL (A1X_UART4_VADDR+A1X_UART_DLL_OFFSET) |
| #define A1X_UART4_DLH (A1X_UART4_VADDR+A1X_UART_DLH_OFFSET) |
| #define A1X_UART4_IER (A1X_UART4_VADDR+A1X_UART_IER_OFFSET) |
| #define A1X_UART4_IIR (A1X_UART4_VADDR+A1X_UART_IIR_OFFSET) |
| #define A1X_UART4_FCR (A1X_UART4_VADDR+A1X_UART_FCR_OFFSET) |
| #define A1X_UART4_LCR (A1X_UART4_VADDR+A1X_UART_LCR_OFFSET) |
| #define A1X_UART4_MCR (A1X_UART4_VADDR+A1X_UART_MCR_OFFSET) |
| #define A1X_UART4_LSR (A1X_UART4_VADDR+A1X_UART_LSR_OFFSET) |
| #define A1X_UART4_MSR (A1X_UART4_VADDR+A1X_UART_MSR_OFFSET) |
| #define A1X_UART4_SCH (A1X_UART4_VADDR+A1X_UART_SCH_OFFSET) |
| #define A1X_UART4_USR (A1X_UART4_VADDR+A1X_UART_USR_OFFSET) |
| #define A1X_UART4_TFL (A1X_UART4_VADDR+A1X_UART_TFL_OFFSET) |
| #define A1X_UART4_RFL (A1X_UART4_VADDR+A1X_UART_RFL_OFFSET) |
| #define A1X_UART4_HALT (A1X_UART4_VADDR+A1X_UART_HALT_OFFSET) |
| |
| #define A1X_UART5_RBR (A1X_UART5_VADDR+A1X_UART_RBR_OFFSET) |
| #define A1X_UART5_THR (A1X_UART5_VADDR+A1X_UART_THR_OFFSET) |
| #define A1X_UART5_DLL (A1X_UART5_VADDR+A1X_UART_DLL_OFFSET) |
| #define A1X_UART5_DLH (A1X_UART5_VADDR+A1X_UART_DLH_OFFSET) |
| #define A1X_UART5_IER (A1X_UART5_VADDR+A1X_UART_IER_OFFSET) |
| #define A1X_UART5_IIR (A1X_UART5_VADDR+A1X_UART_IIR_OFFSET) |
| #define A1X_UART5_FCR (A1X_UART5_VADDR+A1X_UART_FCR_OFFSET) |
| #define A1X_UART5_LCR (A1X_UART5_VADDR+A1X_UART_LCR_OFFSET) |
| #define A1X_UART5_MCR (A1X_UART5_VADDR+A1X_UART_MCR_OFFSET) |
| #define A1X_UART5_LSR (A1X_UART5_VADDR+A1X_UART_LSR_OFFSET) |
| #define A1X_UART5_MSR (A1X_UART5_VADDR+A1X_UART_MSR_OFFSET) |
| #define A1X_UART5_SCH (A1X_UART5_VADDR+A1X_UART_SCH_OFFSET) |
| #define A1X_UART5_USR (A1X_UART5_VADDR+A1X_UART_USR_OFFSET) |
| #define A1X_UART5_TFL (A1X_UART5_VADDR+A1X_UART_TFL_OFFSET) |
| #define A1X_UART5_RFL (A1X_UART5_VADDR+A1X_UART_RFL_OFFSET) |
| #define A1X_UART5_HALT (A1X_UART5_VADDR+A1X_UART_HALT_OFFSET) |
| |
| #define A1X_UART6_RBR (A1X_UART6_VADDR+A1X_UART_RBR_OFFSET) |
| #define A1X_UART6_THR (A1X_UART6_VADDR+A1X_UART_THR_OFFSET) |
| #define A1X_UART6_DLL (A1X_UART6_VADDR+A1X_UART_DLL_OFFSET) |
| #define A1X_UART6_DLH (A1X_UART6_VADDR+A1X_UART_DLH_OFFSET) |
| #define A1X_UART6_IER (A1X_UART6_VADDR+A1X_UART_IER_OFFSET) |
| #define A1X_UART6_IIR (A1X_UART6_VADDR+A1X_UART_IIR_OFFSET) |
| #define A1X_UART6_FCR (A1X_UART6_VADDR+A1X_UART_FCR_OFFSET) |
| #define A1X_UART6_LCR (A1X_UART6_VADDR+A1X_UART_LCR_OFFSET) |
| #define A1X_UART6_MCR (A1X_UART6_VADDR+A1X_UART_MCR_OFFSET) |
| #define A1X_UART6_LSR (A1X_UART6_VADDR+A1X_UART_LSR_OFFSET) |
| #define A1X_UART6_MSR (A1X_UART6_VADDR+A1X_UART_MSR_OFFSET) |
| #define A1X_UART6_SCH (A1X_UART6_VADDR+A1X_UART_SCH_OFFSET) |
| #define A1X_UART6_USR (A1X_UART6_VADDR+A1X_UART_USR_OFFSET) |
| #define A1X_UART6_TFL (A1X_UART6_VADDR+A1X_UART_TFL_OFFSET) |
| #define A1X_UART6_RFL (A1X_UART6_VADDR+A1X_UART_RFL_OFFSET) |
| #define A1X_UART6_HALT (A1X_UART6_VADDR+A1X_UART_HALT_OFFSET) |
| |
| #define A1X_UART7_RBR (A1X_UART7_VADDR+A1X_UART_RBR_OFFSET) |
| #define A1X_UART7_THR (A1X_UART7_VADDR+A1X_UART_THR_OFFSET) |
| #define A1X_UART7_DLL (A1X_UART7_VADDR+A1X_UART_DLL_OFFSET) |
| #define A1X_UART7_DLH (A1X_UART7_VADDR+A1X_UART_DLH_OFFSET) |
| #define A1X_UART7_IER (A1X_UART7_VADDR+A1X_UART_IER_OFFSET) |
| #define A1X_UART7_IIR (A1X_UART7_VADDR+A1X_UART_IIR_OFFSET) |
| #define A1X_UART7_FCR (A1X_UART7_VADDR+A1X_UART_FCR_OFFSET) |
| #define A1X_UART7_LCR (A1X_UART7_VADDR+A1X_UART_LCR_OFFSET) |
| #define A1X_UART7_MCR (A1X_UART7_VADDR+A1X_UART_MCR_OFFSET) |
| #define A1X_UART7_LSR (A1X_UART7_VADDR+A1X_UART_LSR_OFFSET) |
| #define A1X_UART7_MSR (A1X_UART7_VADDR+A1X_UART_MSR_OFFSET) |
| #define A1X_UART7_SCH (A1X_UART7_VADDR+A1X_UART_SCH_OFFSET) |
| #define A1X_UART7_USR (A1X_UART7_VADDR+A1X_UART_USR_OFFSET) |
| #define A1X_UART7_TFL (A1X_UART7_VADDR+A1X_UART_TFL_OFFSET) |
| #define A1X_UART7_RFL (A1X_UART7_VADDR+A1X_UART_RFL_OFFSET) |
| #define A1X_UART7_HALT (A1X_UART7_VADDR+A1X_UART_HALT_OFFSET) |
| |
| /* Register bit field definitions *******************************************/ |
| |
| /* UART Receive Buffer Register */ |
| |
| #define UART_RBR_MASK 0x000000ff |
| |
| /* UART Transmit Holding Register */ |
| |
| #define UART_THR_MASK 0x000000ff |
| |
| /* UART Divisor Latch Low Register */ |
| |
| #define UART_DLL_MASK 0x000000ff |
| |
| /* UART Divisor Latch High Register */ |
| |
| #define UART_DLH_MASK 0x000000ff |
| |
| /* UART Interrupt Enable Register */ |
| |
| #define UART_IER_ERBFI (1 << 0) /* Bit 0: Enable Received Data Available Interrupt */ |
| #define UART_IER_ETBEI (1 << 1) /* Bit 1: Enable Transmit Holding Register Empty Interrupt */ |
| #define UART_IER_ELSI (1 << 2) /* Bit 2: Enable Receiver Line Status Interrupt */ |
| #define UART_IER_EDSSI (1 << 3) /* Bit 3: Enable Modem Status Interrupt */ |
| #define UART_IER_PTIME (1 << 7) /* Bit 7: Programmable THRE Interrupt Mode Enable */ |
| #define UART_IER_ALLIE 0x0000008f |
| |
| /* UART Interrupt Identity Register */ |
| |
| #define UART_IIR_IID_SHIFT (0) /* Bits: 0-3: Interrupt ID */ |
| #define UART_IIR_IID_MASK (15 << UART_IIR_IID_SHIFT) |
| # define UART_IIR_IID_MODEM (0 << UART_IIR_IID_SHIFT) /* Modem status */ |
| # define UART_IIR_IID_NONE (1 << UART_IIR_IID_SHIFT) /* No interrupt pending */ |
| # define UART_IIR_IID_TXEMPTY (2 << UART_IIR_IID_SHIFT) /* THR empty */ |
| # define UART_IIR_IID_RECV (4 << UART_IIR_IID_SHIFT) /* Received data available */ |
| # define UART_IIR_IID_LINESTATUS (6 << UART_IIR_IID_SHIFT) /* Receiver line status */ |
| # define UART_IIR_IID_BUSY (7 << UART_IIR_IID_SHIFT) /* Busy detect */ |
| # define UART_IIR_IID_TIMEOUT (12 << UART_IIR_IID_SHIFT) /* Character timeout */ |
| |
| #define UART_IIR_FEFLAG_SHIFT (6) /* Bits 6-7: FIFOs Enable Flag */ |
| #define UART_IIR_FEFLAG_MASK (3 << UART_IIR_FEFLAG_SHIFT) |
| # define UART_IIR_FEFLAG_DISABLE (0 << UART_IIR_FEFLAG_SHIFT) |
| # define UART_IIR_FEFLAG_ENABLE (3 << UART_IIR_FEFLAG_SHIFT) |
| |
| /* UART FIFO Control Register */ |
| |
| #define UART_FCR_FIFOE (1 << 0) /* Bit 0: Enable FIFOs */ |
| #define UART_FCR_RFIFOR (1 << 1) /* Bit 1: RCVR FIFO Reset */ |
| #define UART_FCR_XFIFOR (1 << 2) /* Bit 2: XMIT FIFO reset */ |
| #define UART_FCR_DMAM (1 << 3) /* Bit 3: DMA mode */ |
| #define UART_FCR_TFT_SHIFT (4) /* Bits 4-5: TX Empty Trigger */ |
| #define UART_FCR_TFT_MASK (3 << UART_FCR_TFT_SHIFT) |
| # define UART_FCR_TFT_EMPTY (0 << UART_FCR_TFT_SHIFT) /* FIFO empty */ |
| # define UART_FCR_TFT_TWO (1 << UART_FCR_TFT_SHIFT) /* 2 characters in the FIFO */ |
| # define UART_FCR_TFT_QUARTER (2 << UART_FCR_TFT_SHIFT) /* FIFO 1/4 full */ |
| # define UART_FCR_TFT_HALF (3 << UART_FCR_TFT_SHIFT) /* FIFO 1/2 full */ |
| |
| #define UART_FCR_RT_SHIFT (6) /* Bits 6-7: RCVR Trigger */ |
| #define UART_FCR_RT_MASK (3 << UART_FCR_RT_SHIFT) |
| # define UART_FCR_RT_ONE (0 << UART_FCR_RT_SHIFT) /* 1 character in the FIFO */ |
| # define UART_FCR_RT_QUARTER (1 << UART_FCR_RT_SHIFT) /* FIFO 1/4 full */ |
| # define UART_FCR_RT_HALF (2 << UART_FCR_RT_SHIFT) /* FIFO 1/2 full */ |
| # define UART_FCR_RT_MINUS2 (3 << UART_FCR_RT_SHIFT) /* FIFO-2 less than full */ |
| |
| /* UART Line Control Register */ |
| |
| #define UART_LCR_DLS_SHIFT (0) /* Bits 0-1: Data Length Select */ |
| #define UART_LCR_DLS_MASK (3 << UART_LCR_DLS_SHIFT) |
| # define UART_LCR_DLS_5BITS (0 << UART_LCR_DLS_SHIFT) /* 5 bits */ |
| # define UART_LCR_DLS_6BITS (1 << UART_LCR_DLS_SHIFT) /* 6 bits */ |
| # define UART_LCR_DLS_7BITS (2 << UART_LCR_DLS_SHIFT) /* 7 bits */ |
| # define UART_LCR_DLS_8BITS (3 << UART_LCR_DLS_SHIFT) /* 8 bits */ |
| |
| #define UART_LCR_STOP (1 << 2) /* Bit 2: Number of stop bits */ |
| #define UART_LCR_PEN (1 << 3) /* Bit 3: Parity Enable */ |
| #define UART_LCR_EPS (1 << 4) /* Bit 4: Even Parity Select */ |
| #define UART_LCR_BC (1 << 6) /* Bit 6: Break Control Bit */ |
| #define UART_LCR_DLAB (1 << 7) /* Bit 7: Divisor Latch Access Bit */ |
| |
| /* UART Modem Control Register */ |
| |
| #define UART_MCR_DTR (1 << 0) /* Bit 0: Data Terminal Ready */ |
| #define UART_MCR_RTS (1 << 1) /* Bit 1: Request to Send */ |
| #define UART_MCR_LOOP (1 << 4) /* Bit 4: Loop Back Mode */ |
| #define UART_MCR_AFCE (1 << 5) /* Bit 5: Auto Flow Control Enable */ |
| #define UART_MCR_SIRE (1 << 6) /* Bit 6: SIR Mode Enable */ |
| |
| /* UART Line Status Register */ |
| |
| #define UART_LSR_DR (1 << 0) /* Bit 0: Data Ready */ |
| #define UART_LSR_OE (1 << 1) /* Bit 1: Overrun Error */ |
| #define UART_LSR_PE (1 << 2) /* Bit 2: Parity Error */ |
| #define UART_LSR_FE (1 << 3) /* Bit 3: Framing Error */ |
| #define UART_LSR_BI (1 << 4) /* Bit 4: Break Interrupt */ |
| #define UART_LSR_THRE (1 << 5) /* Bit 5: TX Holding Register Empty */ |
| #define UART_LSR_TEMT (1 << 6) /* Bit 6: Transmitter Empty */ |
| #define UART_LSR_FIFOERR (1 << 7) /* Bit 7: RX Data Error in FIFO */ |
| |
| /* UART Modem Status Register */ |
| |
| #define UART_MSR_DCTS (1 << 0) /* Bit 0: Delta Clear to Send */ |
| #define UART_MSR_DDSR (1 << 1) /* Bit 1: Delta Data Set Ready */ |
| #define UART_MSR_TERI (1 << 2) /* Bit 2: Trailing Edge Ring Indicator */ |
| #define UART_MSR_DDCD (1 << 3) /* Bit 3: Delta Data Carrier Detect */ |
| #define UART_MSR_CTS (1 << 4) /* Bit 4: Line State of Clear To Send */ |
| #define UART_MSR_DSR (1 << 5) /* Bit 5: Line State of Data Set Ready */ |
| #define UART_MSR_RI (1 << 6) /* Bit 6: Line State of Ring Indicator */ |
| #define UART_MSR_DCD (1 << 7) /* Bit 7: Line State of Data Carrier Detect */ |
| |
| /* UART Scratch Register */ |
| |
| #define UART_SCH_MASK 0x000000ff |
| |
| /* UART Status Register */ |
| |
| #define UART_USR_BUSY (1 << 0) /* Bit 0: UART Busy Bit */ |
| #define UART_USR_TFNF (1 << 1) /* Bit 1: Transmit FIFO Not Full */ |
| #define UART_USR_TFE (1 << 2) /* Bit 2: Transmit FIFO Empty */ |
| #define UART_USR_RFNE (1 << 3) /* Bit 3: Receive FIFO Not Empty */ |
| #define UART_USR_RFF (1 << 4) /* Bit 4: Receive FIFO Full */ |
| |
| /* UART Transmit FIFO Level */ |
| |
| #define UART_TFL_SHIFT (0) /* Bits 0-6: Transmit FIFO Level */ |
| #define UART_TFL_MASK (0x7f << UART_TFL_SHIFT) |
| # define UART_TFL(n) ((uint32_t)(n) << UART_TFL_SHIFT) |
| |
| /* UART Receive FIFO Level */ |
| |
| #define UART_RFL_SHIFT (0) /* Bits 0-6: Receive FIFO Level */ |
| #define UART_RFL_MASK (0x7f << UART_RFL_SHIFT) |
| # define UART_RFL(n) ((uint32_t)(n) << UART_RFL_SHIFT) |
| |
| /* UART Halt TX Register */ |
| |
| #define UART_HALT_HALT_TX (1 << 0) /* Bit 0: Halt TX */ |
| #define UART_HALT_SIR_TX_INVERT (1 << 4) /* Bit 4: SIR Transmit Pulse Polarity Invert */ |
| #define UART_HALT_SIR_RX_INVERT (1 << 5) /* Bit 5: SIR Receiver Pulse Polarity Invert */ |
| |
| #endif /* __ARCH_ARM_SRC_A1X_HARDWARE_A1X_UART_H */ |
