/****************************************************************************
 * arch/risc-v/src/esp32c3-legacy/esp32c3_gpio.h
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

#ifndef __ARCH_RISCV_SRC_ESP32C3_LEGACY_ESP32C3_GPIO_H
#define __ARCH_RISCV_SRC_ESP32C3_LEGACY_ESP32C3_GPIO_H

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdint.h>
#include <stdbool.h>

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

#define MATRIX_DETACH_OUT_SIG     0x100  /* Detach an OUTPUT signal */
#define MATRIX_DETACH_IN_LOW_PIN  0x30   /* Detach non-inverted INPUT signal */
#define MATRIX_DETACH_IN_LOW_HIGH 0x38   /* Detach inverted INPUT signal */

/* Bit-encoded input to esp32c3_configgpio() ********************************/

/* Encoded pin attributes used with esp32c3_configgpio()
 *
 * 8  7  6  5  4  3  2  1  0
 * -- -- -- -- -- -- -- -- --
 * FN FN FN OD PD PU F  O  I
 */

#define PINMODE_SHIFT       0
#define PINMODE_MASK        (7 << PINMODE_SHIFT)
#  define INPUT             (1 << 0)
#  define OUTPUT            (1 << 1)
#  define FUNCTION          (1 << 2)

#define PULLUP              (1 << 3)
#define PULLDOWN            (1 << 4)
#define OPEN_DRAIN          (1 << 5)
#define FUNCTION_SHIFT      6
#define FUNCTION_MASK       (7 << FUNCTION_SHIFT)
#  define FUNCTION_0        (1 << FUNCTION_SHIFT)
#  define FUNCTION_1        (2 << FUNCTION_SHIFT)
#  define FUNCTION_2        (3 << FUNCTION_SHIFT)
#  define FUNCTION_3        (4 << FUNCTION_SHIFT)
#  define FUNCTION_4        (5 << FUNCTION_SHIFT)

#define INPUT_PULLUP        (INPUT | PULLUP)
#define INPUT_PULLDOWN      (INPUT | PULLDOWN)
#define OUTPUT_OPEN_DRAIN   (OUTPUT | OPEN_DRAIN)
#define INPUT_FUNCTION      (INPUT | FUNCTION)
#  define INPUT_FUNCTION_0  (INPUT_FUNCTION | FUNCTION_0)
#  define INPUT_FUNCTION_1  (INPUT_FUNCTION | FUNCTION_1)
#  define INPUT_FUNCTION_2  (INPUT_FUNCTION | FUNCTION_2)
#  define INPUT_FUNCTION_3  (INPUT_FUNCTION | FUNCTION_3)
#  define INPUT_FUNCTION_4  (INPUT_FUNCTION | FUNCTION_4)
#define OUTPUT_FUNCTION     (OUTPUT | FUNCTION)
#  define OUTPUT_FUNCTION_0 (OUTPUT_FUNCTION | FUNCTION_0)
#  define OUTPUT_FUNCTION_1 (OUTPUT_FUNCTION | FUNCTION_1)
#  define OUTPUT_FUNCTION_2 (OUTPUT_FUNCTION | FUNCTION_2)
#  define OUTPUT_FUNCTION_3 (OUTPUT_FUNCTION | FUNCTION_3)
#  define OUTPUT_FUNCTION_4 (OUTPUT_FUNCTION | FUNCTION_4)

/* Interrupt type used with esp32c3_gpioirqenable() */

#define DISABLED          0x00
#define RISING            0x01
#define FALLING           0x02
#define CHANGE            0x03
#define ONLOW             0x04
#define ONHIGH            0x05

/****************************************************************************
 * Public Types
 ****************************************************************************/

#ifndef __ASSEMBLY__

/* Must be big enough to hold the above encodings */

typedef uint16_t gpio_pinattr_t;
typedef uint8_t gpio_intrtype_t;

/****************************************************************************
 * Public Data
 ****************************************************************************/

#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif

/****************************************************************************
 * Public Function Prototypes
 ****************************************************************************/

/****************************************************************************
 * Name: esp32c3_configgpio
 *
 * Description:
 *   Configure a GPIO pin based on encoded pin attributes.
 *
 ****************************************************************************/

int esp32c3_configgpio(int pin, gpio_pinattr_t attr);

/****************************************************************************
 * Name: esp32c3_gpiowrite
 *
 * Description:
 *   Write one or zero to the selected GPIO pin
 *
 ****************************************************************************/

void esp32c3_gpiowrite(int pin, bool value);

/****************************************************************************
 * Name: esp32c3_gpioread
 *
 * Description:
 *   Read one or zero from the selected GPIO pin
 *
 ****************************************************************************/

bool esp32c3_gpioread(int pin);

/****************************************************************************
 * Name: esp32c3_gpio_matrix_in
 *
 * Description:
 *   Set gpio input to a signal
 *   NOTE: one gpio can input to several signals
 *   If signal_idx == 0x30, cancel input to the signal, input 0 to signal
 *   If signal_idx == 0x38, cancel input to the signal, input 1 to signal
 *
 ****************************************************************************/

void esp32c3_gpio_matrix_in(uint32_t gpio, uint32_t signal_idx, bool inv);

/****************************************************************************
 * Name: esp32c3_gpio_matrix_out
 *
 * Description:
 *   Set signal output to gpio
 *   NOTE: one signal can output to several gpios
 *   If signal_idx == 0x100, cancel output put to the gpio
 *
 ****************************************************************************/

void esp32c3_gpio_matrix_out(uint32_t gpio, uint32_t signal_idx,
                             bool out_inv, bool oen_inv);

/****************************************************************************
 * Name: esp32c3_gpioirqinitialize
 *
 * Description:
 *   Initialize logic to support a second level of interrupt decoding for
 *   GPIO pins.
 *
 ****************************************************************************/

#ifdef CONFIG_ESP32C3_GPIO_IRQ
void esp32c3_gpioirqinitialize(void);
#else
#  define esp32c3_gpioirqinitialize()
#endif

/****************************************************************************
 * Name: esp32c3_gpioirqenable
 *
 * Description:
 *   Enable the interrupt for specified GPIO IRQ
 *
 ****************************************************************************/

#ifdef CONFIG_ESP32C3_GPIO_IRQ
void esp32c3_gpioirqenable(int irq, gpio_intrtype_t intrtype);
#else
#  define esp32c3_gpioirqenable(irq,intrtype)
#endif

/****************************************************************************
 * Name: esp32c3_gpioirqdisable
 *
 * Description:
 *   Disable the interrupt for specified GPIO IRQ
 *
 ****************************************************************************/

#ifdef CONFIG_ESP32C3_GPIO_IRQ
void esp32c3_gpioirqdisable(int irq);
#else
#  define esp32c3_gpioirqdisable(irq)
#endif

#ifdef __cplusplus
}
#endif
#undef EXTERN

#endif /* __ASSEMBLY__ */
#endif /* __ARCH_RISCV_SRC_ESP32C3_LEGACY_ESP32C3_GPIO_H */