Correcting banked vs. non-banked issues (there are more)

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3320 42af7a65-404d-4744-a932-0658087f49c3
diff --git a/arch/hc/src/Makefile b/arch/hc/src/Makefile
index 694c15d..349fba2 100755
--- a/arch/hc/src/Makefile
+++ b/arch/hc/src/Makefile
@@ -1,7 +1,7 @@
 ############################################################################
 # arch/hc/src/Makefile
 #
-#   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
 #   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
 #
 # Redistribution and use in source and binary forms, with or without
diff --git a/arch/hc/src/m9s12/m9s12_ethernet.c b/arch/hc/src/m9s12/m9s12_ethernet.c
new file mode 100644
index 0000000..ca98403
--- /dev/null
+++ b/arch/hc/src/m9s12/m9s12_ethernet.c
@@ -0,0 +1,692 @@
+/****************************************************************************
+ * drivers/net/m9s12_ethernet.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#if defined(CONFIG_NET) && defined(CONFIG_HCS12_EMAC)
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <time.h>
+#include <string.h>
+#include <debug.h>
+#include <wdog.h>
+#include <errno.h>
+
+#include <nuttx/irq.h>
+#include <nuttx/arch.h>
+
+#include <net/uip/uip.h>
+#include <net/uip/uip-arp.h>
+#include <net/uip/uip-arch.h>
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* CONFIG_HCS12_NINTERFACES determines the number of physical interfaces
+ * that will be supported.
+ */
+
+#ifndef CONFIG_HCS12_NINTERFACES
+# define CONFIG_HCS12_NINTERFACES 1
+#endif
+
+/* TX poll deley = 1 seconds. CLK_TCK is the number of clock ticks per second */
+
+#define HCS12_WDDELAY   (1*CLK_TCK)
+#define HCS12_POLLHSEC  (1*2)
+
+/* TX timeout = 1 minute */
+
+#define HCS12_TXTIMEOUT (60*CLK_TCK)
+
+/* This is a helper pointer for accessing the contents of the Ethernet header */
+
+#define BUF ((struct uip_eth_hdr *)priv->d_dev.d_buf)
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/* The emac_driver_s encapsulates all state information for a single hardware
+ * interface
+ */
+
+struct emac_driver_s
+{
+  bool    d_bifup;            /* true:ifup false:ifdown */
+  WDOG_ID d_txpoll;           /* TX poll timer */
+  WDOG_ID d_txtimeout;        /* TX timeout timer */
+
+  /* This holds the information visible to uIP/NuttX */
+
+  struct uip_driver_s d_dev;  /* Interface understood by uIP */
+};
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static struct emac_driver_s g_emac[CONFIG_HCS12_NINTERFACES];
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/* Common TX logic */
+
+static int  emac_transmit(FAR struct emac_driver_s *priv);
+static int  emac_uiptxpoll(struct uip_driver_s *dev);
+
+/* Interrupt handling */
+
+static void emac_receive(FAR struct emac_driver_s *priv);
+static void emac_txdone(FAR struct emac_driver_s *priv);
+static int  emac_interrupt(int irq, FAR void *context);
+
+/* Watchdog timer expirations */
+
+static void emac_polltimer(int argc, uint32_t arg, ...);
+static void emac_txtimeout(int argc, uint32_t arg, ...);
+
+/* NuttX callback functions */
+
+static int emac_ifup(struct uip_driver_s *dev);
+static int emac_ifdown(struct uip_driver_s *dev);
+static int emac_txavail(struct uip_driver_s *dev);
+#ifdef CONFIG_NET_IGMP
+static int emac_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac);
+static int emac_rmmac(struct uip_driver_s *dev, FAR const uint8_t *mac);
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Function: emac_transmit
+ *
+ * Description:
+ *   Start hardware transmission.  Called either from the txdone interrupt
+ *   handling or from watchdog based polling.
+ *
+ * Parameters:
+ *   priv  - Reference to the driver state structure
+ *
+ * Returned Value:
+ *   OK on success; a negated errno on failure
+ *
+ * Assumptions:
+ *   May or may not be called from an interrupt handler.  In either case,
+ *   global interrupts are disabled, either explicitly or indirectly through
+ *   interrupt handling logic.
+ *
+ ****************************************************************************/
+
+static int emac_transmit(FAR struct emac_driver_s *priv)
+{
+  /* Verify that the hardware is ready to send another packet.  If we get
+   * here, then we are committed to sending a packet; Higher level logic
+   * must have assured that there is not transmission in progress.
+   */
+
+  /* Increment statistics */
+
+  /* Send the packet: address=priv->d_dev.d_buf, length=priv->d_dev.d_len */
+
+  /* Enable Tx interrupts */
+
+  /* Setup the TX timeout watchdog (perhaps restarting the timer) */
+
+  (void)wd_start(priv->d_txtimeout, HCS12_TXTIMEOUT, emac_txtimeout, 1, (uint32_t)priv);
+  return OK;
+}
+
+/****************************************************************************
+ * Function: emac_uiptxpoll
+ *
+ * Description:
+ *   The transmitter is available, check if uIP has any outgoing packets ready
+ *   to send.  This is a callback from uip_poll().  uip_poll() may be called:
+ *
+ *   1. When the preceding TX packet send is complete,
+ *   2. When the preceding TX packet send timesout and the interface is reset
+ *   3. During normal TX polling
+ *
+ * Parameters:
+ *   dev  - Reference to the NuttX driver state structure
+ *
+ * Returned Value:
+ *   OK on success; a negated errno on failure
+ *
+ * Assumptions:
+ *   May or may not be called from an interrupt handler.  In either case,
+ *   global interrupts are disabled, either explicitly or indirectly through
+ *   interrupt handling logic.
+ *
+ ****************************************************************************/
+
+static int emac_uiptxpoll(struct uip_driver_s *dev)
+{
+  FAR struct emac_driver_s *priv = (FAR struct emac_driver_s *)dev->d_private;
+
+  /* If the polling resulted in data that should be sent out on the network,
+   * the field d_len is set to a value > 0.
+   */
+
+  if (priv->d_dev.d_len > 0)
+    {
+      uip_arp_out(&priv->d_dev);
+      emac_transmit(priv);
+
+      /* Check if there is room in the device to hold another packet. If not,
+       * return a non-zero value to terminate the poll.
+       */
+    }
+
+  /* If zero is returned, the polling will continue until all connections have
+   * been examined.
+   */
+
+  return 0;
+}
+
+/****************************************************************************
+ * Function: emac_receive
+ *
+ * Description:
+ *   An interrupt was received indicating the availability of a new RX packet
+ *
+ * Parameters:
+ *   priv  - Reference to the driver state structure
+ *
+ * Returned Value:
+ *   None
+ *
+ * Assumptions:
+ *   Global interrupts are disabled by interrupt handling logic.
+ *
+ ****************************************************************************/
+
+static void emac_receive(FAR struct emac_driver_s *priv)
+{
+  do
+    {
+      /* Check for errors and update statistics */
+
+      /* Check if the packet is a valid size for the uIP buffer configuration */
+
+      /* Copy the data data from the hardware to priv->d_dev.d_buf.  Set
+       * amount of data in priv->d_dev.d_len
+       */
+
+      /* We only accept IP packets of the configured type and ARP packets */
+
+#ifdef CONFIG_NET_IPv6
+      if (BUF->type == HTONS(UIP_ETHTYPE_IP6))
+#else
+      if (BUF->type == HTONS(UIP_ETHTYPE_IP))
+#endif
+        {
+          uip_arp_ipin(&priv->d_dev);
+          uip_input(&priv->d_dev);
+
+          /* If the above function invocation resulted in data that should be
+           * sent out on the network, the field  d_len will set to a value > 0.
+           */
+
+          if (priv->d_dev.d_len > 0)
+           {
+             uip_arp_out(&priv->d_dev);
+             emac_transmit(priv);
+           }
+        }
+      else if (BUF->type == htons(UIP_ETHTYPE_ARP))
+        {
+          uip_arp_arpin(&priv->d_dev);
+
+          /* If the above function invocation resulted in data that should be
+           * sent out on the network, the field  d_len will set to a value > 0.
+           */
+
+          if (priv->d_dev.d_len > 0)
+            {
+              emac_transmit(priv);
+            }
+        }
+    }
+  while (); /* While there are more packets to be processed */
+}
+
+/****************************************************************************
+ * Function: emac_txdone
+ *
+ * Description:
+ *   An interrupt was received indicating that the last TX packet(s) is done
+ *
+ * Parameters:
+ *   priv  - Reference to the driver state structure
+ *
+ * Returned Value:
+ *   None
+ *
+ * Assumptions:
+ *   Global interrupts are disabled by the watchdog logic.
+ *
+ ****************************************************************************/
+
+static void emac_txdone(FAR struct emac_driver_s *priv)
+{
+  /* Check for errors and update statistics */
+
+  /* If no further xmits are pending, then cancel the TX timeout and
+   * disable further Tx interrupts.
+   */
+
+  wd_cancel(priv->d_txtimeout);
+
+  /* Then poll uIP for new XMIT data */
+
+  (void)uip_poll(&priv->d_dev, emac_uiptxpoll);
+}
+
+/****************************************************************************
+ * Function: emac_interrupt
+ *
+ * Description:
+ *   Hardware interrupt handler
+ *
+ * Parameters:
+ *   irq     - Number of the IRQ that generated the interrupt
+ *   context - Interrupt register state save info (architecture-specific)
+ *
+ * Returned Value:
+ *   OK on success
+ *
+ * Assumptions:
+ *
+ ****************************************************************************/
+
+static int emac_interrupt(int irq, FAR void *context)
+{
+  register FAR struct emac_driver_s *priv = &g_emac[0];
+
+  /* Get and clear interrupt status bits */
+
+  /* Handle interrupts according to status bit settings */
+
+  /* Check if we received an incoming packet, if so, call emac_receive() */
+
+  emac_receive(priv);
+
+  /* Check is a packet transmission just completed.  If so, call emac_txdone.
+   * This may disable further Tx interrupts if there are no pending
+   * tansmissions.
+   */
+
+  emac_txdone(priv);
+
+  return OK;
+}
+
+/****************************************************************************
+ * Function: emac_txtimeout
+ *
+ * Description:
+ *   Our TX watchdog timed out.  Called from the timer interrupt handler.
+ *   The last TX never completed.  Reset the hardware and start again.
+ *
+ * Parameters:
+ *   argc - The number of available arguments
+ *   arg  - The first argument
+ *
+ * Returned Value:
+ *   None
+ *
+ * Assumptions:
+ *   Global interrupts are disabled by the watchdog logic.
+ *
+ ****************************************************************************/
+
+static void emac_txtimeout(int argc, uint32_t arg, ...)
+{
+  FAR struct emac_driver_s *priv = (FAR struct emac_driver_s *)arg;
+
+  /* Increment statistics and dump debug info */
+
+  /* Then reset the hardware */
+
+  /* Then poll uIP for new XMIT data */
+
+  (void)uip_poll(&priv->d_dev, emac_uiptxpoll);
+}
+
+/****************************************************************************
+ * Function: emac_polltimer
+ *
+ * Description:
+ *   Periodic timer handler.  Called from the timer interrupt handler.
+ *
+ * Parameters:
+ *   argc - The number of available arguments
+ *   arg  - The first argument
+ *
+ * Returned Value:
+ *   None
+ *
+ * Assumptions:
+ *   Global interrupts are disabled by the watchdog logic.
+ *
+ ****************************************************************************/
+
+static void emac_polltimer(int argc, uint32_t arg, ...)
+{
+  FAR struct emac_driver_s *priv = (FAR struct emac_driver_s *)arg;
+
+  /* Check if there is room in the send another TX packet.  We cannot perform
+   * the TX poll if he are unable to accept another packet for transmission.
+   */
+
+  /* If so, update TCP timing states and poll uIP for new XMIT data. Hmmm..
+   * might be bug here.  Does this mean if there is a transmit in progress,
+   * we will missing TCP time state updates?
+   */
+
+  (void)uip_timer(&priv->d_dev, emac_uiptxpoll, HCS12_POLLHSEC);
+
+  /* Setup the watchdog poll timer again */
+
+  (void)wd_start(priv->d_txpoll, HCS12_WDDELAY, emac_polltimer, 1, arg);
+}
+
+/****************************************************************************
+ * Function: emac_ifup
+ *
+ * Description:
+ *   NuttX Callback: Bring up the Ethernet interface when an IP address is
+ *   provided 
+ *
+ * Parameters:
+ *   dev  - Reference to the NuttX driver state structure
+ *
+ * Returned Value:
+ *   None
+ *
+ * Assumptions:
+ *
+ ****************************************************************************/
+
+static int emac_ifup(struct uip_driver_s *dev)
+{
+  FAR struct emac_driver_s *priv = (FAR struct emac_driver_s *)dev->d_private;
+
+  ndbg("Bringing up: %d.%d.%d.%d\n",
+       dev->d_ipaddr & 0xff, (dev->d_ipaddr >> 8) & 0xff,
+       (dev->d_ipaddr >> 16) & 0xff, dev->d_ipaddr >> 24 );
+
+  /* Initialize PHYs, the Ethernet interface, and setup up Ethernet interrupts */
+
+  /* Set and activate a timer process */
+
+  (void)wd_start(priv->d_txpoll, HCS12_WDDELAY, emac_polltimer, 1, (uint32_t)priv);
+
+  /* Enable the Ethernet interrupt */
+
+  priv->d_bifup = true;
+  up_enable_irq(CONFIG_HCS12_IRQ);
+  return OK;
+}
+
+/****************************************************************************
+ * Function: emac_ifdown
+ *
+ * Description:
+ *   NuttX Callback: Stop the interface.
+ *
+ * Parameters:
+ *   dev  - Reference to the NuttX driver state structure
+ *
+ * Returned Value:
+ *   None
+ *
+ * Assumptions:
+ *
+ ****************************************************************************/
+
+static int emac_ifdown(struct uip_driver_s *dev)
+{
+  FAR struct emac_driver_s *priv = (FAR struct emac_driver_s *)dev->d_private;
+  irqstate_t flags;
+
+  /* Disable the Ethernet interrupt */
+
+  flags = irqsave();
+  up_disable_irq(CONFIG_HCS12_IRQ);
+
+  /* Cancel the TX poll timer and TX timeout timers */
+
+  wd_cancel(priv->d_txpoll);
+  wd_cancel(priv->d_txtimeout);
+
+  /* Put the the EMAC is its reset, non-operational state.  This should be
+   * a known configuration that will guarantee the emac_ifup() always
+   * successfully brings the interface back up.
+   */
+
+  /* Mark the device "down" */
+
+  priv->d_bifup = false;
+  irqrestore(flags);
+  return OK;
+}
+
+/****************************************************************************
+ * Function: emac_txavail
+ *
+ * Description:
+ *   Driver callback invoked when new TX data is available.  This is a 
+ *   stimulus perform an out-of-cycle poll and, thereby, reduce the TX
+ *   latency.
+ *
+ * Parameters:
+ *   dev  - Reference to the NuttX driver state structure
+ *
+ * Returned Value:
+ *   None
+ *
+ * Assumptions:
+ *   Called in normal user mode
+ *
+ ****************************************************************************/
+
+static int emac_txavail(struct uip_driver_s *dev)
+{
+  FAR struct emac_driver_s *priv = (FAR struct emac_driver_s *)dev->d_private;
+  irqstate_t flags;
+
+  /* Disable interrupts because this function may be called from interrupt
+   * level processing.
+   */
+
+  flags = irqsave();
+
+  /* Ignore the notification if the interface is not yet up */
+
+  if (priv->d_bifup)
+    {
+      /* Check if there is room in the hardware to hold another outgoing packet. */
+
+      /* If so, then poll uIP for new XMIT data */
+
+      (void)uip_poll(&priv->d_dev, emac_uiptxpoll);
+    }
+
+  irqrestore(flags);
+  return OK;
+}
+
+/****************************************************************************
+ * Function: emac_addmac
+ *
+ * Description:
+ *   NuttX Callback: Add the specified MAC address to the hardware multicast
+ *   address filtering
+ *
+ * Parameters:
+ *   dev  - Reference to the NuttX driver state structure
+ *   mac  - The MAC address to be added 
+ *
+ * Returned Value:
+ *   None
+ *
+ * Assumptions:
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_NET_IGMP
+static int emac_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
+{
+  FAR struct emac_driver_s *priv = (FAR struct emac_driver_s *)dev->d_private;
+
+  /* Add the MAC address to the hardware multicast routing table */
+
+  return OK;
+}
+#endif
+
+/****************************************************************************
+ * Function: emac_rmmac
+ *
+ * Description:
+ *   NuttX Callback: Remove the specified MAC address from the hardware multicast
+ *   address filtering
+ *
+ * Parameters:
+ *   dev  - Reference to the NuttX driver state structure
+ *   mac  - The MAC address to be removed 
+ *
+ * Returned Value:
+ *   None
+ *
+ * Assumptions:
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_NET_IGMP
+static int emac_rmmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
+{
+  FAR struct emac_driver_s *priv = (FAR struct emac_driver_s *)dev->d_private;
+
+  /* Add the MAC address to the hardware multicast routing table */
+
+  return OK;
+}
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Function: emac_initialize
+ *
+ * Description:
+ *   Initialize the Ethernet controller and driver
+ *
+ * Parameters:
+ *   intf - In the case where there are multiple EMACs, this value
+ *          identifies which EMAC is to be initialized.
+ *
+ * Returned Value:
+ *   OK on success; Negated errno on failure.
+ *
+ * Assumptions:
+ *
+ ****************************************************************************/
+
+int emac_initialize(int intf)
+{
+  struct lpc17_driver_s *priv;
+
+  /* Get the interface structure associated with this interface number. */
+
+  DEBUGASSERT(inf <  CONFIG_HCS12_NINTERFACES);
+  priv = &g_ethdrvr[intf];
+
+   /* Check if a Ethernet chip is recognized at its I/O base */
+
+  /* Attach the IRQ to the driver */
+
+  if (irq_attach(CONFIG_HCS12_IRQ, emac_interrupt))
+    {
+      /* We could not attach the ISR to the the interrupt */
+
+      return -EAGAIN;
+    }
+
+  /* Initialize the driver structure */
+
+  memset(priv, 0, sizeof(struct emac_driver_s));
+  priv->d_dev.d_ifup    = emac_ifup;     /* I/F down callback */
+  priv->d_dev.d_ifdown  = emac_ifdown;   /* I/F up (new IP address) callback */
+  priv->d_dev.d_txavail = emac_txavail;  /* New TX data callback */
+#ifdef CONFIG_NET_IGMP
+  priv->d_dev.d_addmac  = emac_addmac;   /* Add multicast MAC address */
+  priv->d_dev.d_rmmac   = emac_rmmac;    /* Remove multicast MAC address */
+#endif
+  priv->d_dev.d_private = (void*)g_emac; /* Used to recover private state from dev */
+
+  /* Create a watchdog for timing polling for and timing of transmisstions */
+
+  priv->d_txpoll       = wd_create();   /* Create periodic poll timer */
+  priv->d_txtimeout    = wd_create();   /* Create TX timeout timer */
+
+  /* Put the interface in the down state.  This usually amounts to resetting
+   * the device and/or calling emac_ifdown().
+   */
+
+  /* Read the MAC address from the hardware into priv->d_dev.d_mac.ether_addr_octet */
+
+  /* Register the device with the OS so that socket IOCTLs can be performed */
+
+  (void)netdev_register(&priv->d_dev);
+  return OK;
+}
+
+#endif /* CONFIG_NET && CONFIG_HCS12_EMAC */
diff --git a/arch/hc/src/m9s12/m9s12_lowputc.S b/arch/hc/src/m9s12/m9s12_lowputc.S
index 271d66e..0a6e761 100755
--- a/arch/hc/src/m9s12/m9s12_lowputc.S
+++ b/arch/hc/src/m9s12/m9s12_lowputc.S
@@ -52,6 +52,14 @@
  * Private Definitions
  **************************************************************************/
 
+#ifdef CONFIG_HCS12_NONBANKED
+#  define CALL   jsr
+#  define RETURN rts
+#else
+#  define CALL   call
+#  define RETURN rtc
+#endif
+
 /* Select SCI parameters for the selected console */
 
 #if defined(CONFIG_SCI0_SERIAL_CONSOLE)
@@ -166,7 +174,7 @@
 
 #endif /* CONFIG_HCS12_SERIALMON */
 #endif /* HAVE_SERIAL_CONSOLE */
-	rts
+	RETURN
 	.size	up_lowsetup, . - up_lowsetup
 
 /**************************************************************************
@@ -207,11 +215,11 @@
 #endif /* HCS12_CONSOLE_BITS == 9 */
 
 	stab	(HCS12_CONSOLE_BASE+HCS12_SCI_DRL_OFFSET)
-	rts
+	RETURN
 
 #endif /* !CONFIG_HCS12_SERIALMON */
 #else
-	rts
+	RETURN
 #endif /* HAVE_SERIAL_CONSOLE */
 	.size	up_lowputc, . - up_lowputc
 	.end
diff --git a/arch/hc/src/m9s12/m9s12_saveusercontext.S b/arch/hc/src/m9s12/m9s12_saveusercontext.S
index 652ba49..749dd63 100755
--- a/arch/hc/src/m9s12/m9s12_saveusercontext.S
+++ b/arch/hc/src/m9s12/m9s12_saveusercontext.S
@@ -48,6 +48,14 @@
  * Private Definitions
  **************************************************************************/
 
+#ifdef CONFIG_HCS12_NONBANKED
+#  define CALL   jsr
+#  define RETURN rts
+#else
+#  define CALL   call
+#  define RETURN rtc
+#endif
+
 /**************************************************************************
  * Private Types
  **************************************************************************/
@@ -176,6 +184,6 @@
 #endif
 	clra
 	clrb
-	rts
+	RETURN
 	.size	up_saveusercontext, . - up_saveusercontext
 	.end
diff --git a/arch/hc/src/m9s12/m9s12_start.S b/arch/hc/src/m9s12/m9s12_start.S
index 1a3ec46..dd5b9ce 100755
--- a/arch/hc/src/m9s12/m9s12_start.S
+++ b/arch/hc/src/m9s12/m9s12_start.S
@@ -51,6 +51,14 @@
  * Private Definitions
  ****************************************************************************/
 
+#ifdef CONFIG_HCS12_NONBANKED
+#  define CALL   jsr
+#  define RETURN rts
+#else
+#  define CALL   call
+#  define RETURN rtc
+#endif
+
 #define INITRG_REG (MMC_INITRG_REG(HCS12_REG_BASE))
 #define INITRM_MAP (MMC_INITRM_RAM(HCS12_SRAM_BASE)|MMC_INITRM_RAMHAL)
 #define INITEE_EE  (MMC_INITEE_EE(HCS12_EEPROM_BASE)|MMC_INITEE_EEON)
@@ -79,11 +87,7 @@
 #ifdef CONFIG_HCS12_SERIALMON
 	jsr		#PutChar
 #else
-#ifdef CONFIG_HCS12_NONBANKED
-	jsr		up_lowputc
-#else
-	call	up_lowputc
-#endif
+	CALL	up_lowputc
 #endif
 #endif
 	.endm
@@ -107,8 +111,8 @@
 	movb	#INITRM_MAP, HCS12_MMC_INITRM	/* Set RAM position to 0x2000-0x3fff */
 	movb	#INITEE_EE, HCS12_MMC_INITEE	/* Set EEPROM position to 0x0800 */
 
-	/* In the non-banked mode, PPAGE is set to 0x3d to create a contiguous, 48Kb
-	 * .text address space.
+	/* In the non-banked mode, PPAGE is set to 0x3d to create a (non-contiguous),
+	 * fixed, 48Kb .text address space.
 	 */
 
 #ifdef CONFIG_HCS12_NONBANKED
@@ -176,11 +180,7 @@
 	/* Perform early, low-level initialization */
 
 #ifndef CONFIG_HCS12_SERIALMON
-#ifdef CONFIG_HCS12_NONBANKED
-	jsr		up_lowsetup
-#else
-	call	up_lowsetup
-#endif
+	CALL	up_lowsetup
 #endif
 	showprogress 'A'
 
@@ -219,21 +219,13 @@
 
 	/* Perform early board-level initialization */
 
-#ifdef CONFIG_HCS12_NONBANKED
-	jsr		hcs12_boardinitialize
-#else
-	call	hcs12_boardinitialize
-#endif
+	CALL	hcs12_boardinitialize
 	showprogress 'D'
 
 	/* Now, start the OS */
 
 	showprogress '\n'
-#ifdef CONFIG_HCS12_NONBANKED
-	jsr		os_start
-#else
-	call	os_start
-#endif
+	CALL	os_start
 	bra		__start
 
 	/* Variables:
@@ -259,7 +251,6 @@
 	.hword	_edata
 	.size	__start, .-__start
 
-
 /************************************************************************************
  * .rodata
  ************************************************************************************/
diff --git a/arch/hc/src/m9s12/m9s12_vectors.S b/arch/hc/src/m9s12/m9s12_vectors.S
index 073e289..991d37d 100755
--- a/arch/hc/src/m9s12/m9s12_vectors.S
+++ b/arch/hc/src/m9s12/m9s12_vectors.S
@@ -45,6 +45,14 @@
  * Pre-processor Definitions
  ************************************************************************************/
 
+#ifdef CONFIG_HCS12_NONBANKED
+#  define CALL   jsr
+#  define RETURN rts
+#else
+#  define CALL   call
+#  define RETURN rtc
+#endif
+
 /************************************************************************************
  * Global Symbols
  ************************************************************************************/
@@ -161,7 +169,7 @@
  * .text
  ************************************************************************************/
 
-	.text
+	.section	nonbanked, "x"
 	.type	handlers, function
 handlers:
 
@@ -301,7 +309,7 @@
 	/* Recover the IRQ number and call up_doirq() */
 
 	ldab	.Lbsave
-	bsr		up_doirq
+	CALL	up_doirq
 	leas	2, sp
 
 	/* Check if the return value in d is the same as regs parameter passed in the TOS */
diff --git a/drivers/net/skeleton.c b/drivers/net/skeleton.c
index ec9877b..c286886 100644
--- a/drivers/net/skeleton.c
+++ b/drivers/net/skeleton.c
@@ -1,7 +1,7 @@
 /****************************************************************************
  * drivers/net/skeleton.c
  *
- *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without