| # Examples / `flowc` | |
| General Usage Instructions: | |
| 1. The receiver side enter, start the receiver program. The receiver is now | |
| waiting to receive data on the configured serial port. | |
| 2. On the sender side start the sender program. This will send data to the | |
| receiver which will verify that no data is lost. | |
| On Linux, you can alternatively do: | |
| ```bash | |
| $ stty -F /dev/ttyACM0 crtscts | |
| $ cat testdata.dat >/dev/ttyACM0 | |
| ``` | |
| where you need to replace `/dev/ttyACM0` with your selected serial device. |