| /**************************************************************************** |
| * examples/nxflat/tests/signal/signal.c |
| * |
| * Copyright (C) 2009, 2012, 2015 Gregory Nutt. All rights reserved. |
| * Author: Gregory Nutt <gnutt@nuttx.org> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * 3. Neither the name NuttX nor the names of its contributors may be |
| * used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Included Files |
| ****************************************************************************/ |
| |
| #include <sys/types.h> |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <signal.h> |
| #include <unistd.h> |
| #include <string.h> |
| #include <errno.h> |
| |
| /**************************************************************************** |
| * Pre-processor Definitions |
| ****************************************************************************/ |
| |
| #ifndef USEC_PER_MSEC |
| # define USEC_PER_MSEC 1000L |
| #endif |
| |
| #ifndef MSEC_PER_SEC |
| # define MSEC_PER_SEC 1000L |
| #endif |
| |
| #ifndef USEC_PER_SEC |
| # define USEC_PER_SEC (USEC_PER_MSEC * MSEC_PER_SEC) |
| #endif |
| |
| #define SHORT_DELAY (USEC_PER_SEC / 3) |
| |
| /**************************************************************************** |
| * Private Data |
| ****************************************************************************/ |
| |
| static int sigusr1_rcvd = 0; |
| static int sigusr2_rcvd = 0; |
| |
| /**************************************************************************** |
| * Private Functions |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Name: siguser_action |
| ****************************************************************************/ |
| |
| /* NOTE: it is necessary for functions that are referred to by function pointers |
| * pointer to be declared with global scope (at least for ARM). Otherwise, |
| * a relocation type that is not supported by ELF is generated by GCC. |
| */ |
| |
| void siguser_action(int signo, siginfo_t *siginfo, void *arg) |
| { |
| printf("siguser_action: Received signo=%d siginfo=%p arg=%p\n", |
| signo, siginfo, arg); |
| |
| if (signo == SIGUSR1) |
| { |
| printf(" SIGUSR1 received\n"); |
| sigusr2_rcvd = 1; |
| } |
| else if (signo == SIGUSR2) |
| { |
| printf(" SIGUSR2 received\n"); |
| sigusr1_rcvd = 2; |
| } |
| else |
| { |
| printf(" ERROR: Unexpected signal\n"); |
| } |
| |
| if (siginfo) |
| { |
| printf("siginfo:\n"); |
| printf(" si_signo = %d\n", siginfo->si_signo); |
| printf(" si_code = %d\n", siginfo->si_code); |
| printf(" si_errno = %d\n", siginfo->si_errno); |
| printf(" si_value = %d\n", siginfo->si_value.sival_int); |
| } |
| } |
| |
| /**************************************************************************** |
| * Public Functions |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Name: main |
| ****************************************************************************/ |
| |
| int main(int argc, char **argv) |
| { |
| struct sigaction act; |
| struct sigaction oact1; |
| struct sigaction oact2; |
| pid_t mypid = getpid(); |
| union sigval sigval; |
| int status; |
| |
| printf("Setting up signal handlers from pid=%d\n", mypid); |
| |
| /* Set up so that siguser_action will respond to SIGUSR1 */ |
| |
| memset(&act, 0, sizeof(struct sigaction)); |
| act.sa_sigaction = siguser_action; |
| act.sa_flags = SA_SIGINFO; |
| |
| (void)sigemptyset(&act.sa_mask); |
| |
| status = sigaction(SIGUSR1, &act, &oact1); |
| if (status != 0) |
| { |
| fprintf(stderr, "Failed to install SIGUSR1 handler, errno=%d\n", |
| errno); |
| exit(2); |
| } |
| |
| printf("Old SIGUSR1 sighandler at %p\n", oact1.sa_handler); |
| printf("New SIGUSR1 sighandler at %p\n", siguser_action); |
| |
| /* Set up so that siguser_action will respond to SIGUSR2 */ |
| |
| status = sigaction(SIGUSR2, &act, &oact2); |
| if (status != 0) |
| { |
| fprintf(stderr, "Failed to install SIGUSR2 handler, errno=%d\n", |
| errno); |
| exit(2); |
| } |
| |
| printf("Old SIGUSR2 sighandler at %p\n", oact2.sa_handler); |
| printf("New SIGUSR2 sighandler at %p\n", siguser_action); |
| printf("Raising SIGUSR1 from pid=%d\n", mypid); |
| |
| fflush(stdout); usleep(SHORT_DELAY); |
| |
| /* Send SIGUSR1 to ourselves via kill() */ |
| |
| printf("Kill-ing SIGUSR1 from pid=%d\n", mypid); |
| status = kill(mypid, SIGUSR1); |
| if (status != 0) |
| { |
| fprintf(stderr, "Failed to kill SIGUSR1, errno=%d\n", errno); |
| exit(3); |
| } |
| |
| usleep(SHORT_DELAY); |
| printf("SIGUSR1 raised from pid=%d\n", mypid); |
| |
| /* Verify that we received SIGUSR1 */ |
| |
| if (sigusr1_rcvd == 0) |
| { |
| fprintf(stderr, "SIGUSR1 not received\n"); |
| exit(4); |
| } |
| |
| sigusr1_rcvd = 0; |
| |
| /* Send SIGUSR2 to ourselves */ |
| |
| printf("sigqueue-ing SIGUSR2 from pid=%d\n", mypid); |
| fflush(stdout); usleep(SHORT_DELAY); |
| |
| /* Send SIGUSR2 to ourselves via sigqueue() */ |
| |
| sigval.sival_int = 87; |
| status = sigqueue(mypid, SIGUSR2, sigval); |
| if (status != 0) |
| { |
| fprintf(stderr, "Failed to queue SIGUSR2, errno=%d\n", errno); |
| exit(5); |
| } |
| |
| usleep(SHORT_DELAY); |
| printf("SIGUSR2 queued from pid=%d, sigval=87\n", mypid); |
| |
| /* Verify that SIGUSR2 was received */ |
| |
| if (sigusr2_rcvd == 0) |
| { |
| fprintf(stderr, "SIGUSR2 not received\n"); |
| exit(6); |
| } |
| |
| sigusr2_rcvd = 0; |
| |
| /* Remove the siguser_action handler and replace the SIGUSR2 |
| * handler with sigusr2_sighandler. |
| */ |
| |
| printf("Resetting SIGUSR2 signal handler from pid=%d\n", mypid); |
| |
| status = sigaction(SIGUSR2, &oact2, &act); |
| if (status != 0) |
| { |
| fprintf(stderr, "Failed to install SIGUSR1 handler, errno=%d\n", |
| errno); |
| exit(2); |
| } |
| |
| printf("Old SIGUSR1 sighandler at %p\n", act.sa_handler); |
| printf("New SIGUSR1 sighandler at %p\n", oact1.sa_handler); |
| |
| /* Verify that the handler that was removed was siguser_action */ |
| |
| if ((void*)act.sa_handler != (void*)siguser_action) |
| { |
| fprintf(stderr, |
| "Old SIGUSR2 signal handler (%p) is not siguser_action (%p)\n", |
| act.sa_handler, siguser_action); |
| exit(8); |
| } |
| |
| /* Send SIGUSR2 to ourselves via kill() */ |
| |
| printf("Killing SIGUSR2 from pid=%d\n", mypid); |
| fflush(stdout); usleep(SHORT_DELAY); |
| |
| status = kill(mypid, SIGUSR2); |
| if (status != 0) |
| { |
| fprintf(stderr, "Failed to kill SIGUSR2, errno=%d\n", errno); |
| exit(9); |
| } |
| |
| usleep(SHORT_DELAY); |
| printf("SIGUSR2 killed from pid=%d\n", mypid); |
| |
| /* Verify that SIGUSR2 was received */ |
| |
| if (sigusr2_rcvd == 0) |
| { |
| fprintf(stderr, "SIGUSR2 not received\n"); |
| exit(10); |
| } |
| |
| sigusr2_rcvd = 0; |
| |
| return 0; |
| } |