/*
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 */

#ifndef H_BLE_LL_
#define H_BLE_LL_

#include "stats/stats.h"
#include "nimble/nimble_opt.h"
#include "nimble/nimble_npl.h"
#include "controller/ble_phy.h"

#ifdef MYNEWT
#include "controller/ble_ll_ctrl.h"
#include "hal/hal_system.h"
#endif
#ifdef RIOT_VERSION
#include "hal/hal_timer.h"
#endif

#ifdef __cplusplus
extern "C" {
#endif

#if defined(MYNEWT) && MYNEWT_VAL(BLE_LL_HCI_VS_EVENT_ON_ASSERT)
#ifdef NDEBUG
#define BLE_LL_ASSERT(cond) (void(0))
#else
void ble_ll_assert(const char *file, unsigned line) __attribute((noreturn));
#define BLE_LL_FILE  (__builtin_strrchr(__FILE__, '/') ? \
                      __builtin_strrchr (__FILE__, '/') + 1 : __FILE__)
#define BLE_LL_ASSERT(cond) \
    if (!(cond)) { \
        ble_ll_assert(BLE_LL_FILE, __LINE__); \
    }
#endif
#else
#define BLE_LL_ASSERT(cond) assert(cond)
#endif

/* Controller revision. */
#define BLE_LL_SUB_VERS_NR      (0x0000)

/* Timing jitter as per spec is +/16 usecs */
#define BLE_LL_JITTER_USECS         (16)


#if MYNEWT_VAL(BLE_LL_SCA) < 0
#error Invalid SCA value
#elif MYNEWT_VAL(BLE_LL_SCA) <= 20
#define BLE_LL_SCA_ENUM     7
#elif MYNEWT_VAL(BLE_LL_SCA) <= 30
#define BLE_LL_SCA_ENUM     6
#elif MYNEWT_VAL(BLE_LL_SCA) <= 50
#define BLE_LL_SCA_ENUM     5
#elif MYNEWT_VAL(BLE_LL_SCA) <= 75
#define BLE_LL_SCA_ENUM     4
#elif MYNEWT_VAL(BLE_LL_SCA) <= 100
#define BLE_LL_SCA_ENUM     3
#elif MYNEWT_VAL(BLE_LL_SCA) <= 150
#define BLE_LL_SCA_ENUM     2
#elif MYNEWT_VAL(BLE_LL_SCA) <= 250
#define BLE_LL_SCA_ENUM     1
#elif MYNEWT_VAL(BLE_LL_SCA) <= 500
#define BLE_LL_SCA_ENUM     0
#else
#error Invalid SCA value
#endif

/* Packet queue header definition */
STAILQ_HEAD(ble_ll_pkt_q, os_mbuf_pkthdr);

#define BLE_LL_CHAN_MAP_LEN (5)

/*
 * Global Link Layer data object. There is only one Link Layer data object
 * per controller although there may be many instances of the link layer state
 * machine running.
 */
struct ble_ll_obj
{
    /* Supported features */
    uint64_t ll_supp_features;

    /* Current Link Layer state */
    uint8_t ll_state;

    /* Global channel map */
    uint8_t chan_map[BLE_LL_CHAN_MAP_LEN];
    uint8_t chan_map_used;

#if MYNEWT_VAL(BLE_LL_ROLE_CENTRAL) || MYNEWT_VAL(BLE_LL_ROLE_PERIPHERAL)
    /* Number of ACL data packets supported */
    uint8_t ll_num_acl_pkts;

    /* ACL data packet size */
    uint16_t ll_acl_pkt_size;
#endif

#if MYNEWT_VAL(BLE_LL_ISO)
    uint8_t ll_num_iso_pkts;
    uint16_t ll_iso_pkt_size;
#endif

    /* Preferred PHY's */
    uint8_t ll_pref_tx_phys;
    uint8_t ll_pref_rx_phys;

    /* Task event queue */
    struct ble_npl_eventq ll_evq;

    /* Packet receive queue (and event). Holds received packets from PHY */
    struct ble_npl_event ll_rx_pkt_ev;
    struct ble_ll_pkt_q ll_rx_pkt_q;

    /* Packet transmit queue */
#if MYNEWT_VAL(BLE_LL_ROLE_CENTRAL) || MYNEWT_VAL(BLE_LL_ROLE_PERIPHERAL)
    struct ble_npl_event ll_tx_pkt_ev;
#endif
    struct ble_ll_pkt_q ll_tx_pkt_q;

#if MYNEWT_VAL(BLE_LL_ROLE_CENTRAL) || MYNEWT_VAL(BLE_LL_ROLE_PERIPHERAL)
    /* Data buffer overflow event */
    struct ble_npl_event ll_dbuf_overflow_ev;

    /* Number of completed packets event */
    struct ble_npl_event ll_comp_pkt_ev;
#endif

    /* HW error callout */
    struct ble_npl_callout ll_hw_err_timer;
};
extern struct ble_ll_obj g_ble_ll_data;

/* Link layer statistics */
STATS_SECT_START(ble_ll_stats)
    STATS_SECT_ENTRY(hci_cmds)
    STATS_SECT_ENTRY(hci_cmd_errs)
    STATS_SECT_ENTRY(hci_events_sent)
    STATS_SECT_ENTRY(bad_ll_state)
    STATS_SECT_ENTRY(bad_acl_hdr)
    STATS_SECT_ENTRY(no_bufs)
    STATS_SECT_ENTRY(rx_adv_pdu_crc_ok)
    STATS_SECT_ENTRY(rx_adv_pdu_crc_err)
    STATS_SECT_ENTRY(rx_adv_bytes_crc_ok)
    STATS_SECT_ENTRY(rx_adv_bytes_crc_err)
    STATS_SECT_ENTRY(rx_data_pdu_crc_ok)
    STATS_SECT_ENTRY(rx_data_pdu_crc_err)
    STATS_SECT_ENTRY(rx_data_bytes_crc_ok)
    STATS_SECT_ENTRY(rx_data_bytes_crc_err)
    STATS_SECT_ENTRY(rx_adv_malformed_pkts)
    STATS_SECT_ENTRY(rx_adv_ind)
    STATS_SECT_ENTRY(rx_adv_direct_ind)
    STATS_SECT_ENTRY(rx_adv_nonconn_ind)
    STATS_SECT_ENTRY(rx_adv_ext_ind)
    STATS_SECT_ENTRY(rx_scan_reqs)
    STATS_SECT_ENTRY(rx_scan_rsps)
    STATS_SECT_ENTRY(rx_connect_reqs)
    STATS_SECT_ENTRY(rx_scan_ind)
    STATS_SECT_ENTRY(rx_aux_connect_rsp)
    STATS_SECT_ENTRY(rx_pdu_on_scan_disabled)
    STATS_SECT_ENTRY(adv_txg)
    STATS_SECT_ENTRY(adv_late_starts)
    STATS_SECT_ENTRY(adv_resched_pdu_fail)
    STATS_SECT_ENTRY(adv_drop_event)
    STATS_SECT_ENTRY(sched_state_conn_errs)
    STATS_SECT_ENTRY(sched_state_adv_errs)
    STATS_SECT_ENTRY(scan_starts)
    STATS_SECT_ENTRY(scan_stops)
    STATS_SECT_ENTRY(scan_req_txf)
    STATS_SECT_ENTRY(scan_req_txg)
    STATS_SECT_ENTRY(scan_rsp_txg)
    STATS_SECT_ENTRY(aux_missed_adv)
    STATS_SECT_ENTRY(aux_scheduled)
    STATS_SECT_ENTRY(aux_received)
    STATS_SECT_ENTRY(aux_fired_for_read)
    STATS_SECT_ENTRY(aux_allocated)
    STATS_SECT_ENTRY(aux_freed)
    STATS_SECT_ENTRY(aux_sched_cb)
    STATS_SECT_ENTRY(aux_conn_req_tx)
    STATS_SECT_ENTRY(aux_conn_rsp_tx)
    STATS_SECT_ENTRY(aux_conn_rsp_err)
    STATS_SECT_ENTRY(aux_scan_req_tx)
    STATS_SECT_ENTRY(aux_scan_rsp_err)
    STATS_SECT_ENTRY(aux_chain_cnt)
    STATS_SECT_ENTRY(aux_chain_err)
    STATS_SECT_ENTRY(aux_scan_drop)
    STATS_SECT_ENTRY(adv_evt_dropped)
    STATS_SECT_ENTRY(scan_timer_stopped)
    STATS_SECT_ENTRY(scan_timer_restarted)
    STATS_SECT_ENTRY(periodic_adv_drop_event)
    STATS_SECT_ENTRY(periodic_chain_drop_event)
    STATS_SECT_ENTRY(sync_event_failed)
    STATS_SECT_ENTRY(sync_received)
    STATS_SECT_ENTRY(sync_chain_failed)
    STATS_SECT_ENTRY(sync_missed_err)
    STATS_SECT_ENTRY(sync_crc_err)
    STATS_SECT_ENTRY(sync_rx_buf_err)
    STATS_SECT_ENTRY(sync_scheduled)
    STATS_SECT_ENTRY(sched_state_sync_errs)
    STATS_SECT_ENTRY(sched_invalid_pdu)
STATS_SECT_END
extern STATS_SECT_DECL(ble_ll_stats) ble_ll_stats;

/* States */
#define BLE_LL_STATE_STANDBY        (0)
#if MYNEWT_VAL(BLE_LL_ROLE_BROADCASTER)
#define BLE_LL_STATE_ADV            (1)
#endif
#if MYNEWT_VAL(BLE_LL_ROLE_OBSERVER)
#define BLE_LL_STATE_SCANNING       (2)
#endif
#if MYNEWT_VAL(BLE_LL_ROLE_PERIPHERAL) || MYNEWT_VAL(BLE_LL_ROLE_CENTRAL)
#define BLE_LL_STATE_CONNECTION     (4)
#endif
#if MYNEWT_VAL(BLE_LL_DTM)
#define BLE_LL_STATE_DTM            (5)
#endif
#if MYNEWT_VAL(BLE_LL_ROLE_OBSERVER) && MYNEWT_VAL(BLE_LL_CFG_FEAT_LL_PERIODIC_ADV)
#define BLE_LL_STATE_SYNC           (6)
#endif
#if MYNEWT_VAL(BLE_LL_ROLE_OBSERVER) && MYNEWT_VAL(BLE_LL_CFG_FEAT_LL_EXT_ADV)
#define BLE_LL_STATE_SCAN_AUX       (7)
#endif
#if MYNEWT_VAL(BLE_LL_EXT)
#define BLE_LL_STATE_EXTERNAL       (8)
#endif
#if MYNEWT_VAL(BLE_LL_ISO_BROADCASTER)
#define BLE_LL_STATE_BIG            (9)
#endif

/* LL Features */
#define BLE_LL_FEAT_LE_ENCRYPTION       (0x0000000000001)
#define BLE_LL_FEAT_CONN_PARM_REQ       (0x0000000000002)
#define BLE_LL_FEAT_EXTENDED_REJ        (0x0000000000004)
#define BLE_LL_FEAT_PERIPH_INIT         (0x0000000000008)
#define BLE_LL_FEAT_LE_PING             (0x0000000000010)
#define BLE_LL_FEAT_DATA_LEN_EXT        (0x0000000000020)
#define BLE_LL_FEAT_LL_PRIVACY          (0x0000000000040)
#define BLE_LL_FEAT_EXT_SCAN_FILT       (0x0000000000080)
#define BLE_LL_FEAT_LE_2M_PHY           (0x0000000000100)
#define BLE_LL_FEAT_STABLE_MOD_ID_TX    (0x0000000000200)
#define BLE_LL_FEAT_STABLE_MOD_ID_RX    (0x0000000000400)
#define BLE_LL_FEAT_LE_CODED_PHY        (0x0000000000800)
#define BLE_LL_FEAT_EXT_ADV             (0x0000000001000)
#define BLE_LL_FEAT_PERIODIC_ADV        (0x0000000002000)
#define BLE_LL_FEAT_CSA2                (0x0000000004000)
#define BLE_LL_FEAT_LE_POWER_CLASS_1    (0x0000000008000)
#define BLE_LL_FEAT_MIN_USED_CHAN       (0x0000000010000)
#define BLE_LL_FEAT_CTE_REQ             (0x0000000020000)
#define BLE_LL_FEAT_CTE_RSP             (0x0000000040000)
#define BLE_LL_FEAT_CTE_TX              (0x0000000080000)
#define BLE_LL_FEAT_CTE_RX              (0x0000000100000)
#define BLE_LL_FEAT_CTE_AOD             (0x0000000200000)
#define BLE_LL_FEAT_CTE_AOA             (0x0000000400000)
#define BLE_LL_FEAT_CTE_RECV            (0x0000000800000)
#define BLE_LL_FEAT_SYNC_TRANS_SEND     (0x0000001000000)
#define BLE_LL_FEAT_SYNC_TRANS_RECV     (0x0000002000000)
#define BLE_LL_FEAT_SCA_UPDATE          (0x0000004000000)
#define BLE_LL_FEAT_REM_PKEY            (0x0000008000000)
#define BLE_LL_FEAT_CIS_CENTRAL         (0x0000010000000)
#define BLE_LL_FEAT_CIS_PERIPH          (0x0000020000000)
#define BLE_LL_FEAT_ISO_BROADCASTER     (0x0000040000000)
#define BLE_LL_FEAT_SYNC_RECV           (0x0000080000000)
#define BLE_LL_FEAT_CIS_HOST            (0x0000100000000)
#define BLE_LL_FEAT_POWER_CTRL_REQ      (0x0000200000000)
#define BLE_LL_FEAT_POWER_CHANGE_IND    (0x0000400000000)
#define BLE_LL_FEAT_PATH_LOSS_MON       (0x0000800000000)
#define BLE_LL_FEAT_PERIODIC_ADV_ADI    (0x0001000000000)
#define BLE_LL_FEAT_CONN_SUBRATING      (0x0002000000000)
#define BLE_LL_FEAT_CONN_SUBRATING_HOST (0x0004000000000)
#define BLE_LL_FEAT_CHANNEL_CLASS       (0x0008000000000)
#define BLE_LL_FEAT_CS                  (0x0400000000000)
#define BLE_LL_FEAT_CS_HOST_SUPPORT     (0x0800000000000)
#define BLE_LL_FEAT_CS_PCT_QUALITY_IND  (0x1000000000000)

/* This is initial mask, so if feature exchange will not happen,
 * but host will want to use this procedure, we will try. If not
 * succeed, feature bit will be cleared.
 * Look at LL Features above to find out what is allowed
 */
#define BLE_LL_CONN_INITIAL_FEATURES    (0x00000022)
#define BLE_LL_CONN_CLEAR_FEATURE(connsm, feature)   (connsm->conn_features &= ~(feature))

/* All the features which can be controlled by the Host */
#if MYNEWT_VAL(BLE_LL_CFG_FEAT_LL_ENHANCED_CONN_UPDATE)
#define BLE_LL_HOST_CONTROLLED_FEATURES (BLE_LL_FEAT_CONN_SUBRATING_HOST)
#else
#define BLE_LL_HOST_CONTROLLED_FEATURES (0)
#endif

/* LL timing */
#define BLE_LL_IFS                  (150)       /* usecs */
#define BLE_LL_MAFS                 (300)       /* usecs */
#define BLE_LL_MSS                  (150)       /* usecs */

/*
 * BLE LL device address. Note that element 0 of the array is the LSB and
 * is sent over the air first. Byte 5 is the MSB and is the last one sent over
 * the air.
 */
#define BLE_DEV_ADDR_LEN            (6)     /* bytes */

struct ble_dev_addr
{
    uint8_t u8[BLE_DEV_ADDR_LEN];
};

#define BLE_IS_DEV_ADDR_STATIC(addr)        ((addr->u8[5] & 0xc0) == 0xc0)
#define BLE_IS_DEV_ADDR_RESOLVABLE(addr)    ((addr->u8[5] & 0xc0) == 0x40)
#define BLE_IS_DEV_ADDR_UNRESOLVABLE(addr)  ((addr->u8[5] & 0xc0) == 0x00)

/*
 * LL packet format
 *
 *  -> Preamble         (1/2 bytes)
 *  -> Access Address   (4 bytes)
 *  -> PDU              (2 to 257 octets)
 *  -> CRC              (3 bytes)
 */
#define BLE_LL_PREAMBLE_LEN     (1)
#define BLE_LL_ACC_ADDR_LEN     (4)
#define BLE_LL_CRC_LEN          (3)
#define BLE_LL_PDU_HDR_LEN      (2)
#define BLE_LL_MAX_PAYLOAD_LEN  (255)
#define BLE_LL_MIN_PDU_LEN      (BLE_LL_PDU_HDR_LEN)
#define BLE_LL_MAX_PDU_LEN      ((BLE_LL_PDU_HDR_LEN) + (BLE_LL_MAX_PAYLOAD_LEN))
#define BLE_LL_CRCINIT_ADV      (0x555555)

#define BLE_LL_CONN_HANDLE(t, h)            ((((t) << 8) & BLE_LL_CONN_HANDLE_TYPE_MASK) | \
                                             ((h) & BLE_LL_CONN_HANDLE_IDX_MASK))
#define BLE_LL_CONN_HANDLE_TYPE_MASK        (0x0700)
#define BLE_LL_CONN_HANDLE_IDX_MASK         (0x00ff)
#define BLE_LL_CONN_HANDLE_TYPE(conn_h)     (((conn_h) & BLE_LL_CONN_HANDLE_TYPE_MASK) >> 8)
#define BLE_LL_CONN_HANDLE_IDX(conn_h)      ((conn_h) & BLE_LL_CONN_HANDLE_IDX_MASK)

#define BLE_LL_CONN_HANDLE_TYPE_ACL         (0x00)
#define BLE_LL_CONN_HANDLE_TYPE_CIS         (0x01)
#define BLE_LL_CONN_HANDLE_TYPE_BIS         (0x02)
#define BLE_LL_CONN_HANDLE_TYPE_BIS_SYNC    (0x03)

#define BLE_LL_CONN_HANDLE_IS_ACL(ch) \
    (BLE_LL_CONN_HANDLE_TYPE(ch) == BLE_LL_CONN_HANDLE_TYPE_ACL)
#define BLE_LL_CONN_HANDLE_IS_CIS(ch) \
    (BLE_LL_CONN_HANDLE_TYPE(ch) == BLE_LL_CONN_HANDLE_TYPE_CIS)
#define BLE_LL_CONN_HANDLE_IS_BIS(ch) \
    (BLE_LL_CONN_HANDLE_TYPE(ch) == BLE_LL_CONN_HANDLE_TYPE_BIS)
#define BLE_LL_CONN_HANDLE_IS_BIS_SYNC(ch) \
    (BLE_LL_CONN_HANDLE_TYPE(ch) == BLE_LL_CONN_HANDLE_TYPE_BIS_SYNC)

/* Access address for advertising channels */
#define BLE_ACCESS_ADDR_ADV             (0x8E89BED6)

/*
 * Advertising PDU format:
 * -> 2 byte header
 *      -> LSB contains pdu type, txadd and rxadd bits.
 *      -> MSB contains length (6 bits). Length is length of payload. Does
 *         not include the header length itself.
 * -> Payload (max 37 bytes)
 */
#define BLE_ADV_PDU_HDR_TYPE_MASK           (0x0F)
#define BLE_ADV_PDU_HDR_CHSEL_MASK          (0x20)
#define BLE_ADV_PDU_HDR_TXADD_MASK          (0x40)
#define BLE_ADV_PDU_HDR_RXADD_MASK          (0x80)

/* Advertising channel PDU types */
#define BLE_ADV_PDU_TYPE_ADV_IND            (0)
#define BLE_ADV_PDU_TYPE_ADV_DIRECT_IND     (1)
#define BLE_ADV_PDU_TYPE_ADV_NONCONN_IND    (2)
#define BLE_ADV_PDU_TYPE_SCAN_REQ           (3)
#define BLE_ADV_PDU_TYPE_SCAN_RSP           (4)
#define BLE_ADV_PDU_TYPE_CONNECT_IND        (5)
#define BLE_ADV_PDU_TYPE_ADV_SCAN_IND       (6)
#define BLE_ADV_PDU_TYPE_ADV_EXT_IND        (7)
#define BLE_ADV_PDU_TYPE_AUX_ADV_IND        BLE_ADV_PDU_TYPE_ADV_EXT_IND
#define BLE_ADV_PDU_TYPE_AUX_SCAN_RSP       BLE_ADV_PDU_TYPE_ADV_EXT_IND
#define BLE_ADV_PDU_TYPE_AUX_SYNC_IND       BLE_ADV_PDU_TYPE_ADV_EXT_IND
#define BLE_ADV_PDU_TYPE_AUX_CHAIN_IND      BLE_ADV_PDU_TYPE_ADV_EXT_IND
#define BLE_ADV_PDU_TYPE_AUX_CONNECT_REQ    BLE_ADV_PDU_TYPE_CONNECT_IND
#define BLE_ADV_PDU_TYPE_AUX_SCAN_REQ       BLE_ADV_PDU_TYPE_SCAN_REQ
#define BLE_ADV_PDU_TYPE_AUX_CONNECT_RSP    (8)

/* Extended Header Length (6b) + AdvMode (2b) */
#define BLE_LL_EXT_ADV_HDR_LEN          (1)

#define BLE_LL_EXT_ADV_ADVA_BIT         (0)
#define BLE_LL_EXT_ADV_TARGETA_BIT      (1)
#define BLE_LL_EXT_ADV_CTE_INFO_BIT     (2)
#define BLE_LL_EXT_ADV_DATA_INFO_BIT    (3)
#define BLE_LL_EXT_ADV_AUX_PTR_BIT      (4)
#define BLE_LL_EXT_ADV_SYNC_INFO_BIT    (5)
#define BLE_LL_EXT_ADV_TX_POWER_BIT     (6)

#define BLE_LL_EXT_ADV_FLAGS_SIZE       (1)
#define BLE_LL_EXT_ADV_ADVA_SIZE        (6)
#define BLE_LL_EXT_ADV_TARGETA_SIZE     (6)
#define BLE_LL_EXT_ADV_CTE_INFO_SIZE    (1)
#define BLE_LL_EXT_ADV_DATA_INFO_SIZE   (2)
#define BLE_LL_EXT_ADV_AUX_PTR_SIZE     (3)
#define BLE_LL_EXT_ADV_SYNC_INFO_SIZE   (18)
#define BLE_LL_EXT_ADV_TX_POWER_SIZE    (1)

#define BLE_LL_EXT_ADV_MODE_NON_CONN    (0x00)
#define BLE_LL_EXT_ADV_MODE_CONN        (0x01)
#define BLE_LL_EXT_ADV_MODE_SCAN        (0x02)

/* If Channel Selection Algorithm #2 is supported */
#define BLE_ADV_PDU_HDR_CHSEL               (0x20)

/*
 * TxAdd and RxAdd bit definitions. A 0 is a public address; a 1 is a
 * random address.
 */
#define BLE_ADV_PDU_HDR_TXADD_RAND          (0x40)
#define BLE_ADV_PDU_HDR_RXADD_RAND          (0x80)

/*
 * Data Channel format
 *
 *  -> Header (2 bytes)
 *      -> LSB contains llid, nesn, sn and md
 *      -> MSB contains length (8 bits)
 *  -> Payload (0 to 251)
 *  -> MIC (0 or 4 bytes)
 */
#define BLE_LL_DATA_HDR_LLID_MASK       (0x03)
#define BLE_LL_DATA_HDR_NESN_MASK       (0x04)
#define BLE_LL_DATA_HDR_SN_MASK         (0x08)
#define BLE_LL_DATA_HDR_MD_MASK         (0x10)
#define BLE_LL_DATA_HDR_RSRVD_MASK      (0xE0)
#define BLE_LL_DATA_PDU_MAX_PYLD        (251)
#define BLE_LL_DATA_MIC_LEN             (4)

/* LLID definitions */
#define BLE_LL_LLID_RSRVD               (0)
#define BLE_LL_LLID_DATA_FRAG           (1)
#define BLE_LL_LLID_DATA_START          (2)
#define BLE_LL_LLID_CTRL                (3)

#define BLE_LL_LLID_IS_CTRL(hdr) \
    (((hdr) & BLE_LL_DATA_HDR_LLID_MASK) == BLE_LL_LLID_CTRL)
#define BLE_LL_LLID_IS_DATA(hdr) \
    ((((hdr) & BLE_LL_DATA_HDR_LLID_MASK) == BLE_LL_LLID_DATA_START) || \
     (((hdr) & BLE_LL_DATA_HDR_LLID_MASK) == BLE_LL_LLID_DATA_FRAG))

/*
 * CONNECT_REQ
 *      -> InitA        (6 bytes)
 *      -> AdvA         (6 bytes)
 *      -> LLData       (22 bytes)
 *          -> Access address (4 bytes)
 *          -> CRC init (3 bytes)
 *          -> WinSize (1 byte)
 *          -> WinOffset (2 bytes)
 *          -> Interval (2 bytes)
 *          -> Latency (2 bytes)
 *          -> Timeout (2 bytes)
 *          -> Channel Map (5 bytes)
 *          -> Hop Increment (5 bits)
 *          -> SCA (3 bits)
 *
 *  InitA is the initiators public (TxAdd=0) or random (TxAdd=1) address.
 *  AdvaA is the advertisers public (RxAdd=0) or random (RxAdd=1) address.
 *  LLData contains connection request data.
 *      aa: Link Layer's access address
 *      crc_init: The CRC initialization value used for CRC calculation.
 *      winsize: The transmit window size = winsize * 1.25 msecs
 *      winoffset: The transmit window offset =  winoffset * 1.25 msecs
 *      interval: The connection interval = interval * 1.25 msecs.
 *      latency: connection slave latency = latency
 *      timeout: Connection supervision timeout = timeout * 10 msecs.
 *      chanmap: contains channel mapping indicating used and unused data
 *               channels. Only bits that are 1 are usable. LSB is channel 0.
 *      hop_inc: Hop increment used for frequency hopping. Random value in
 *               range of 5 to 16.
 */
#define BLE_CONNECT_REQ_LEN         (34)
#define BLE_CONNECT_REQ_PDU_LEN     (BLE_CONNECT_REQ_LEN + BLE_LL_PDU_HDR_LEN)

#define BLE_SCAN_REQ_LEN            (12)
#define BLE_SCAN_RSP_MAX_LEN        (37)
#define BLE_SCAN_RSP_MAX_EXT_LEN    (251)

#define BLE_LL_ADDR_SUBTYPE_IDENTITY    (0)
#define BLE_LL_ADDR_SUBTYPE_RPA         (1)
#define BLE_LL_ADDR_SUBTYPE_NRPA        (2)

/* ACAD data types */
#define BLE_LL_ACAD_CHANNEL_MAP_UPDATE_IND 0x28
#define BLE_LL_ACAD_BIGINFO                0x2C

struct ble_ll_acad_channel_map_update_ind {
    uint8_t map[5];
    uint16_t instant;
} __attribute__((packed));

/*--- External API ---*/
/* Reset the Link Layer */
int ble_ll_reset(void);

/* 'Boolean' function returning true if address is a valid random address */
int ble_ll_is_valid_random_addr(const uint8_t *addr);

/*
 * Check if given own_addr_type is valid for current controller configuration
 * given the random address provided (when applicable)
 */
int ble_ll_is_valid_own_addr_type(uint8_t own_addr_type,
                                  const uint8_t *random_addr);

/* Calculate maximum octets of PDU payload which can be transmitted during
 * 'usecs' on a PHY 'phy_mode'. */
uint16_t ble_ll_pdu_max_tx_octets_get(uint32_t usecs, int phy_mode);

/* Is this address a resolvable private address? */
int ble_ll_is_rpa(const uint8_t *addr, uint8_t addr_type);

int ble_ll_addr_subtype(const uint8_t *addr, uint8_t addr_type);

/* Is this address an identity address? */
int ble_ll_addr_is_id(uint8_t *addr, uint8_t addr_type);

/* Is 'addr' our device address? 'addr_type' is public (0) or random (!=0) */
int ble_ll_is_our_devaddr(uint8_t *addr, int addr_type);

/* Get identity address 'addr_type' is public (0) or random (!=0) */
uint8_t *ble_ll_get_our_devaddr(uint8_t addr_type);

/**
 * Called to put a packet on the Link Layer transmit packet queue.
 *
 * @param txpdu Pointer to transmit packet
 */
void ble_ll_acl_data_in(struct os_mbuf *txpkt);

/**
 * Allocates mbuf for received PDU
 *
 * This allocated mbuf (may be chained if necessary) that has capacity large
 * enough to store received PDU of given length. It does not set mbufs length
 * as this has to be done by PHY when copying data.
 *
 * @param len  Length of PDU, including PDU header and excluding MIC (if encrypted)
 *
 * @return mbuf large enough to store received PDU on success
 *         NULL on failure (oom)
 */
struct os_mbuf *ble_ll_rxpdu_alloc(uint16_t len);

/* Tell the Link Layer there has been a data buffer overflow */
void ble_ll_data_buffer_overflow(void);

/* Tell the link layer there has been a hardware error */
void ble_ll_hw_error(void);

/*--- PHY interfaces ---*/
struct ble_mbuf_hdr;

/* Called by the PHY when a packet has started */
int ble_ll_rx_start(uint8_t *rxbuf, uint8_t chan, struct ble_mbuf_hdr *hdr);

/* Called by the PHY when a packet reception ends */
int ble_ll_rx_end(uint8_t *rxbuf, struct ble_mbuf_hdr *rxhdr);

/* Helper callback to tx mbuf using ble_phy_tx() */
uint8_t ble_ll_tx_mbuf_pducb(uint8_t *dptr, void *pducb_arg, uint8_t *hdr_byte);
uint8_t ble_ll_tx_flat_mbuf_pducb(uint8_t *dptr, void *pducb_arg, uint8_t *hdr_byte);

/*--- Controller API ---*/
void ble_ll_mbuf_init(struct os_mbuf *m, uint8_t pdulen, uint8_t hdr);

/* Set the link layer state */
void ble_ll_state_set(uint8_t ll_state);

/* Get the link layer state */
uint8_t ble_ll_state_get(void);

/* Add an event to LL task */
void ble_ll_event_add(struct ble_npl_event *ev);

/* Remove an event from LL task */
void ble_ll_event_remove(struct ble_npl_event *ev);

/* Hand received pdu's to LL task  */
void ble_ll_rx_pdu_in(struct os_mbuf *rxpdu);

/*
 * Set public address
 *
 * This can be used to set controller public address from vendor specific storage,
 * usually should be done in hal_bsp_init().
 * Shall be *only* called before LL is initialized, i.e. before sysinit stage.
 */
int ble_ll_set_public_addr(const uint8_t *addr);

/* Set random address */
int ble_ll_set_random_addr(const uint8_t *cmdbuf, uint8_t len, bool hci_adv_ext);

/* Wait for response timer expiration callback */
void ble_ll_wfr_timer_exp(void *arg);

/* Read set of features supported by the Link Layer */
uint64_t ble_ll_read_supp_features(void);

/* Set host supported features */
int ble_ll_set_host_feat(const uint8_t *cmdbuf, uint8_t len);

/* Read set of states supported by the Link Layer */
uint64_t ble_ll_read_supp_states(void);

/* Random numbers */
int ble_ll_rand_init(void);
void ble_ll_rand_sample(uint8_t rnum);
int ble_ll_rand_data_get(uint8_t *buf, uint8_t len);
void ble_ll_rand_prand_get(uint8_t *prand);
int ble_ll_rand_start(void);
uint32_t ble_ll_rand(void);

static inline int
ble_ll_get_addr_type(uint8_t txrxflag)
{
    if (txrxflag) {
        return BLE_HCI_ADV_OWN_ADDR_RANDOM;
    }
    return BLE_HCI_ADV_OWN_ADDR_PUBLIC;
}

#if MYNEWT_VAL(BLE_LL_CFG_FEAT_LE_ENCRYPTION)
/* LTK 0x4C68384139F574D836BCF34E9DFB01BF */
extern const uint8_t g_bletest_LTK[];
extern uint16_t g_bletest_EDIV;
extern uint64_t g_bletest_RAND;
extern uint64_t g_bletest_SKDm;
extern uint64_t g_bletest_SKDs;
extern uint32_t g_bletest_IVm;
extern uint32_t g_bletest_IVs;
#endif

#if MYNEWT_VAL(BLE_LL_DTM)
void ble_ll_dtm_init(void);
#endif

#ifdef __cplusplus
}
#endif

#endif /* H_LL_ */