diff --git a/docs/tutorials/blinky/blinky.rst b/docs/tutorials/blinky/blinky.rst
index c2349b0..aacbba5 100644
--- a/docs/tutorials/blinky/blinky.rst
+++ b/docs/tutorials/blinky/blinky.rst
@@ -10,6 +10,7 @@
    Blinky on Arduino Primo <blinky_primo>
    Blinky on Olimex <olimex>
    Blinky on nRF52 DK <nRF52>
+   Blinky on PineTime <pinetime>
    Blinky on RedBear Nano 2 <rbnano2>
    Blinky on STM32F4-Discovery <blinky_stm32f4disc>
    Add Console and Shell to Blinky <blinky_console>
@@ -40,6 +41,7 @@
 -  :doc:`blinky_primo`
 -  :doc:`olimex`
 -  :doc:`nRF52`
+-  :doc:`pinetime`
 -  :doc:`rbnano2`
 -  :doc:`blinky_stm32f4disc`
 
diff --git a/docs/tutorials/blinky/pinetime.rst b/docs/tutorials/blinky/pinetime.rst
new file mode 100644
index 0000000..dd8d042
--- /dev/null
+++ b/docs/tutorials/blinky/pinetime.rst
@@ -0,0 +1,186 @@
+Blinky, your "Hello World!", on a PineTime smartwatch
+-------------------------------------------------------
+
+This tutorial shows you how to create, build, and run the Blinky
+application on a PineTime smartwatch.
+
+.. contents::
+  :local:
+  :depth: 2
+
+Prerequisites
+~~~~~~~~~~~~~
+
+-  Meet the prerequisites listed in :doc:`Project Blinky <blinky>`.
+-  Have a `PineTime Dev Kit <https://store.pine64.org/?product=pinetime-dev-kit>`__
+-  Have a `ST-LINK programmer <https://www.st.com/en/development-tools/st-link-v2.html>`__ or a cheap clone
+-  Install a patched version of OpenOCD 0.10.0 described in :doc:`Install OpenOCD <../../get_started/native_install/cross_tools>`.
+
+If you have not removed the flash protection yet, you should to that first. 
+See `the PineTime wiki <https://wiki.pine64.org/index.php/Reprogramming_the_PineTime>`__ 
+for instructions.
+
+Create a Project
+~~~~~~~~~~~~~~~~
+
+Create a new project if you do not have an existing one. You can skip
+this step and proceed to `Create the Targets`_ if you
+already have a project created.
+
+Run the following commands to create a new project:
+
+.. code-block:: console
+
+        $ mkdir ~/dev
+        $ cd ~/dev
+        $ newt new blinky-pinetime
+        Downloading project skeleton from apache/mynewt-blinky...
+        Downloading repository mynewt-blinky 
+        Installing skeleton in blinky-pinetime...
+        Project blinky-pinetime successfully created.
+        $ cd blinky-pinetime
+        $ newt upgrade
+        newt upgrade
+        Downloading repository mynewt-core (commit: master)
+        Downloading repository mynewt-nimble (commit: master)
+        Downloading repository mcuboot (commit: master)
+        Making the following changes to the project:
+            install apache-mynewt-core (1.7.0)
+            install apache-mynewt-nimble (1.2.0)
+            install mcuboot (1.3.1)
+        $
+
+Create the Targets
+~~~~~~~~~~~~~~~~~~
+
+Create two targets for the PineTime - one for the bootloader and
+one for the Blinky application.
+
+Run the following ``newt target`` commands, from your project directory,
+to create a bootloader target. We name the target ``boot-pinetime``:
+
+.. code-block:: console
+    :emphasize-lines: 3
+
+    $ newt target create boot-pinetime
+    $ newt target set boot-pinetime app=@mcuboot/boot/mynewt
+    $ newt target set boot-pinetime bsp=@apache-mynewt-core/hw/bsp/pinetime
+    $ newt target set boot-pinetime build_profile=optimized
+
+Run the following ``newt target`` commands to create a target for the
+Blinky application. We name the target ``blinky-pinetime``.
+
+.. code-block:: console
+    :emphasize-lines: 3
+
+    $ newt target create blinky-pinetime
+    $ newt target set blinky-pinetime app=apps/blinky
+    $ newt target set blinky-pinetime bsp=@apache-mynewt-core/hw/bsp/pinetime
+    $ newt target set blinky-pinetime build_profile=debug
+
+You can run the ``newt target show`` command to verify the target
+settings:
+
+.. code-block:: console
+
+    $ newt target show
+    targets/blinky-pinetime
+        app=apps/blinky
+        bsp=@apache-mynewt-core/hw/bsp/pinetime
+        build_profile=debug
+    targets/boot-pinetime
+        app=@mcuboot/boot/mynewt
+        bsp=@apache-mynewt-core/hw/bsp/pinetime
+        build_profile=optimized
+
+Build the Target Executables
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Run the ``newt build boot-pinetime`` command to build the bootloader:
+
+.. code-block:: console
+
+    $ newt build boot-pinetime
+    Building target targets/boot-pinetime
+    Compiling bin/targets/boot-pinetime/generated/src/boot-pinetime-sysflash.c
+    Compiling bin/targets/boot-pinetime/generated/src/boot-pinetime-sysinit-app.c
+    Compiling bin/targets/boot-pinetime/generated/src/boot-pinetime-sysdown-app.c
+    Compiling repos/mcuboot/boot/bootutil/src/boot_record.c
+    Compiling repos/mcuboot/boot/bootutil/src/caps.c
+
+        ...
+
+    Archiving sys_sysinit.a
+    Archiving util_mem.a
+    Archiving util_rwlock.a
+    Linking /tmp/blinky-pinetime/bin/targets/boot-pinetime/app/boot/mynewt/mynewt.elf
+    Target successfully built: targets/boot-pinetime
+
+
+Run the ``newt build blinky-pinetime`` command to build the Blinky
+application:
+
+.. code-block:: console
+
+    $ newt build blinky-pinetime
+    Building target targets/blinky-pinetime
+    Compiling bin/targets/blinky-pinetime/generated/src/blinky-pinetime-sysinit-app.c
+    Compiling bin/targets/blinky-pinetime/generated/src/blinky-pinetime-sysdown-app.c
+    Compiling bin/targets/blinky-pinetime/generated/src/blinky-pinetime-sysflash.c
+    Compiling repos/apache-mynewt-core/hw/bsp/pinetime/src/sbrk.c
+    Compiling apps/blinky/src/main.c
+    Assembling repos/apache-mynewt-core/hw/bsp/pinetime/src/arch/cortex_m4/gcc_startup_nrf52.s
+    Compiling repos/apache-mynewt-core/hw/bsp/pinetime/src/hal_bsp.c
+
+        ...
+
+    Archiving sys_sysinit.a
+    Archiving util_mem.a
+    Archiving util_rwlock.a
+    Linking /tmp/blinky-pinetime/bin/targets/blinky-pinetime/app/apps/blinky/blinky.elf
+    Target successfully built: targets/blinky-pinetime
+
+Sign and Create the Blinky Application Image
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Run the ``newt create-image blinky-pinetime 1.0.0`` command to create and
+sign the application image. You may assign an arbitrary version (e.g.
+1.0.0) to the image.
+
+.. code-block:: console
+
+    $ newt create-image blinky-pinetime 1.0.0
+    App image succesfully generated: ~/dev/blinky-pinetime/bin/targets/blinky-pinetime/app/apps/blinky/blinky.img
+
+Connect to the Board
+~~~~~~~~~~~~~~~~~~~~
+
+-  Connect a ST-LINK programmer via USB to your computer.
+-  Connect the ST-LINK programmer to the SWD connectors of the PineTime. The 
+   easiest way it to mount the PineTime on a cradle and let the programmer cable 
+   rest on the contact pads. See `PineTime wiki <https://wiki.pine64.org/index.php/PineTime#SWD_Pinout>`__ 
+   for the pinout.
+
+Load the Bootloader and the Blinky Application Image
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Run the ``newt load boot-pinetime`` command to load the bootloader onto the
+board:
+
+.. code-block:: console
+
+    $ newt load boot-pinetime
+    Loading bootloader
+    $
+
+Run the ``newt load blinky-pinetime`` command to load the Blinky
+application image onto the board.
+
+.. code-block:: console
+
+    $ newt load blinky-pinetime
+    Loading app image into slot 1
+
+You should see the backlight of the screen board blink!
+
+Note: The screen itself will stay black, this could make the blinking difficult to see.