blob: eb1fc9af4a1717a66888357c531f0846d7d1242c [file] [log] [blame]
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
/** tbb - test bench BLE. */
#include "os/mynewt.h"
#if MYNEWT_VAL(TESTBENCH_BLE)
#include <assert.h>
#include <string.h>
#include <stdio.h>
#include <errno.h>
#include "bsp/bsp.h"
#include "bsp/bsp.h"
#include "hal/hal_gpio.h"
#include "console/console.h"
#include "hal/hal_system.h"
#include "config/config.h"
#include "split/split.h"
#include "modlog/modlog.h"
/* BLE */
#include "nimble/ble.h"
#include "host/ble_hs.h"
#include "services/gap/ble_svc_gap.h"
#include "oic/oc_gatt.h"
#include "tbb.h"
static int tbb_gap_event(struct ble_gap_event *event, void *arg);
void
tbb_print_addr(const void *addr)
{
const uint8_t *u8p;
u8p = addr;
MODLOG_DFLT(INFO, "%02x:%02x:%02x:%02x:%02x:%02x",
u8p[5], u8p[4], u8p[3], u8p[2], u8p[1], u8p[0]);
}
/**
* Logs information about a connection to the console.
*/
static void
tbb_print_conn_desc(struct ble_gap_conn_desc *desc)
{
MODLOG_DFLT(INFO, "handle=%d our_ota_addr_type=%d our_ota_addr=",
desc->conn_handle, desc->our_ota_addr.type);
tbb_print_addr(desc->our_ota_addr.val);
MODLOG_DFLT(INFO, " our_id_addr_type=%d our_id_addr=",
desc->our_id_addr.type);
tbb_print_addr(desc->our_id_addr.val);
MODLOG_DFLT(INFO, " peer_ota_addr_type=%d peer_ota_addr=",
desc->peer_ota_addr.type);
tbb_print_addr(desc->peer_ota_addr.val);
MODLOG_DFLT(INFO, " peer_id_addr_type=%d peer_id_addr=",
desc->peer_id_addr.type);
tbb_print_addr(desc->peer_id_addr.val);
MODLOG_DFLT(INFO, " conn_itvl=%d conn_latency=%d supervision_timeout=%d "
"encrypted=%d authenticated=%d bonded=%d\n",
desc->conn_itvl, desc->conn_latency,
desc->supervision_timeout,
desc->sec_state.encrypted,
desc->sec_state.authenticated,
desc->sec_state.bonded);
}
/**
* Enables advertising with the following parameters:
* o General discoverable mode.
* o Undirected connectable mode.
*/
static void
tbb_advertise(void)
{
struct ble_gap_adv_params adv_params;
struct ble_hs_adv_fields fields;
const char *name;
int rc;
/**
* Set the advertisement data included in our advertisements:
* o Flags (indicates advertisement type and other general info).
* o Advertising tx power.
* o Device name.
* o 16-bit service UUIDs (alert notifications).
*/
memset(&fields, 0, sizeof fields);
/* Advertise two flags:
* o Discoverability in forthcoming advertisement (general)
* o BLE-only (BR/EDR unsupported).
*/
fields.flags = BLE_HS_ADV_F_DISC_GEN |
BLE_HS_ADV_F_BREDR_UNSUP;
/* Indicate that the TX power level field should be included; have the
* stack fill this value automatically. This is done by assiging the
* special value BLE_HS_ADV_TX_PWR_LVL_AUTO.
*/
fields.tx_pwr_lvl_is_present = 1;
fields.tx_pwr_lvl = BLE_HS_ADV_TX_PWR_LVL_AUTO;
name = ble_svc_gap_device_name();
fields.name = (uint8_t *)name;
fields.name_len = strlen(name);
fields.name_is_complete = 1;
fields.uuids16 = (ble_uuid16_t[]) {
BLE_UUID16_INIT(OC_GATT_SEC_SVC_UUID)
};
fields.num_uuids16 = 1;
fields.uuids16_is_complete = 1;
rc = ble_gap_adv_set_fields(&fields);
if (rc != 0) {
MODLOG_DFLT(ERROR, "error setting advertisement data; rc=%d\n", rc);
return;
}
/* Begin advertising. */
memset(&adv_params, 0, sizeof adv_params);
adv_params.conn_mode = BLE_GAP_CONN_MODE_UND;
adv_params.disc_mode = BLE_GAP_DISC_MODE_GEN;
rc = ble_gap_adv_start(BLE_OWN_ADDR_PUBLIC, NULL, BLE_HS_FOREVER,
&adv_params, tbb_gap_event, NULL);
if (rc != 0) {
MODLOG_DFLT(ERROR, "error enabling advertisement; rc=%d\n", rc);
return;
}
}
/**
* The nimble host executes this callback when a GAP event occurs. The
* application associates a GAP event callback with each connection that forms.
* tbb uses the same callback for all connections.
*
* @param event The type of event being signalled.
* @param ctxt Various information pertaining to the event.
* @param arg Application-specified argument; unuesd by
* tbb.
*
* @return 0 if the application successfully handled the
* event; nonzero on failure. The semantics
* of the return code is specific to the
* particular GAP event being signalled.
*/
static int
tbb_gap_event(struct ble_gap_event *event, void *arg)
{
struct ble_gap_conn_desc desc;
int rc;
switch (event->type) {
case BLE_GAP_EVENT_CONNECT:
/* A new connection was established or a connection attempt failed. */
MODLOG_DFLT(INFO, "connection %s; status=%d ",
event->connect.status == 0 ? "established" : "failed",
event->connect.status);
if (event->connect.status == 0) {
rc = ble_gap_conn_find(event->connect.conn_handle, &desc);
assert(rc == 0);
tbb_print_conn_desc(&desc);
}
MODLOG_DFLT(INFO, "\n");
/* Try to advertise again. */
tbb_advertise();
return 0;
case BLE_GAP_EVENT_DISCONNECT:
MODLOG_DFLT(INFO, "disconnect; reason=%d ", event->disconnect.reason);
tbb_print_conn_desc(&event->disconnect.conn);
MODLOG_DFLT(INFO, "\n");
/* Connection terminated; resume advertising. */
tbb_advertise();
return 0;
case BLE_GAP_EVENT_CONN_UPDATE:
/* The central has updated the connection parameters. */
MODLOG_DFLT(INFO, "connection updated; status=%d ",
event->conn_update.status);
rc = ble_gap_conn_find(event->connect.conn_handle, &desc);
assert(rc == 0);
tbb_print_conn_desc(&desc);
MODLOG_DFLT(INFO, "\n");
return 0;
case BLE_GAP_EVENT_ADV_COMPLETE:
MODLOG_DFLT(INFO, "advertise complete; reason=%d\n",
event->adv_complete.reason);
tbb_advertise();
return 0;
case BLE_GAP_EVENT_ENC_CHANGE:
/* Encryption has been enabled or disabled for this connection. */
MODLOG_DFLT(INFO, "encryption change event; status=%d ",
event->enc_change.status);
rc = ble_gap_conn_find(event->connect.conn_handle, &desc);
assert(rc == 0);
tbb_print_conn_desc(&desc);
MODLOG_DFLT(INFO, "\n");
return 0;
case BLE_GAP_EVENT_SUBSCRIBE:
MODLOG_DFLT(INFO, "subscribe event; conn_handle=%d attr_handle=%d "
"reason=%d prevn=%d curn=%d previ=%d curi=%d\n",
event->subscribe.conn_handle,
event->subscribe.attr_handle,
event->subscribe.reason,
event->subscribe.prev_notify,
event->subscribe.cur_notify,
event->subscribe.prev_indicate,
event->subscribe.cur_indicate);
return 0;
case BLE_GAP_EVENT_MTU:
MODLOG_DFLT(INFO, "mtu update event; conn_handle=%d cid=%d mtu=%d\n",
event->mtu.conn_handle,
event->mtu.channel_id,
event->mtu.value);
return 0;
}
return 0;
}
static void
tbb_on_reset(int reason)
{
MODLOG_DFLT(ERROR, "Resetting state; reason=%d\n", reason);
}
static void
tbb_on_sync(void)
{
/* Begin advertising. */
tbb_advertise();
}
void
tbb_init(void)
{
int rc;
/* Initialize the NimBLE host configuration. */
ble_hs_cfg.reset_cb = tbb_on_reset;
ble_hs_cfg.sync_cb = tbb_on_sync;
/* Set the default device name. */
rc = ble_svc_gap_device_name_set(MYNEWT_VAL(TESTBENCH_BLE_NAME));
assert(rc == 0);
}
#endif