| /** | |
| ****************************************************************************** | |
| * @file stm32f1xx_hal_can_ex.h | |
| * @author MCD Application Team | |
| * @version V1.1.1 | |
| * @date 12-May-2017 | |
| * @brief Header file of CAN HAL Extension module. | |
| ****************************************************************************** | |
| * @attention | |
| * | |
| * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
| * | |
| * Redistribution and use in source and binary forms, with or without modification, | |
| * are permitted provided that the following conditions are met: | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * 3. Neither the name of STMicroelectronics nor the names of its contributors | |
| * may be used to endorse or promote products derived from this software | |
| * without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| ****************************************************************************** | |
| */ | |
| /* Define to prevent recursive inclusion -------------------------------------*/ | |
| #ifndef __STM32F1xx_HAL_CAN_EX_H | |
| #define __STM32F1xx_HAL_CAN_EX_H | |
| #ifdef __cplusplus | |
| extern "C" { | |
| #endif | |
| #if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \ | |
| defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) | |
| /* Includes ------------------------------------------------------------------*/ | |
| #include "stm32f1xx_hal_def.h" | |
| /** @addtogroup STM32F1xx_HAL_Driver | |
| * @{ | |
| */ | |
| /** @defgroup CANEx CANEx | |
| * @{ | |
| */ | |
| /* Exported types ------------------------------------------------------------*/ | |
| /** | |
| * @brief CAN filter configuration structure definition | |
| */ | |
| /* CAN filter banks differences over STM32F1 devices: */ | |
| /* - STM32F1 Connectivity line: 28 filter banks shared between CAN1 and CAN2 */ | |
| /* - Other STM32F10x devices: 14 filter banks */ | |
| typedef struct | |
| { | |
| uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit | |
| configuration, first one for a 16-bit configuration). | |
| This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ | |
| uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit | |
| configuration, second one for a 16-bit configuration). | |
| This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ | |
| uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, | |
| according to the mode (MSBs for a 32-bit configuration, | |
| first one for a 16-bit configuration). | |
| This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ | |
| uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, | |
| according to the mode (LSBs for a 32-bit configuration, | |
| second one for a 16-bit configuration). | |
| This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ | |
| uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. | |
| This parameter can be a value of @ref CAN_filter_FIFO */ | |
| #if defined(STM32F105xC) || defined(STM32F107xC) | |
| uint32_t FilterNumber; /*!< Specifies the filter which will be initialized. | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 27. */ | |
| #else | |
| uint32_t FilterNumber; /*!< Specifies the filter which will be initialized. | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 13. */ | |
| #endif /* STM32F105xC || STM32F107xC */ | |
| uint32_t FilterMode; /*!< Specifies the filter mode to be initialized. | |
| This parameter can be a value of @ref CAN_filter_mode */ | |
| uint32_t FilterScale; /*!< Specifies the filter scale. | |
| This parameter can be a value of @ref CAN_filter_scale */ | |
| uint32_t FilterActivation; /*!< Enable or disable the filter. | |
| This parameter can be set to ENABLE or DISABLE. */ | |
| uint32_t BankNumber; /*!< Select the start slave bank filter | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 28. */ | |
| }CAN_FilterConfTypeDef; | |
| /* Exported constants --------------------------------------------------------*/ | |
| /* Exported macro ------------------------------------------------------------*/ | |
| /* Private macro -------------------------------------------------------------*/ | |
| /** @defgroup CANEx_Private_Macros CAN Extended Private Macros | |
| * @{ | |
| */ | |
| #if defined(STM32F105xC) || defined(STM32F107xC) | |
| #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27U) | |
| #else | |
| #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13U) | |
| #endif /* STM32F105xC || STM32F107xC */ | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| #endif /* STM32F103x6) || STM32F103xB || STM32F103xE || STM32F103xG) || STM32F105xC || STM32F107xC */ | |
| #ifdef __cplusplus | |
| } | |
| #endif | |
| #endif /* __STM32F1xx_HAL_CAN_EX_H */ | |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |