| /** |
| * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * 3. Neither the name of the copyright holder nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef NRFX_SPI_H__ |
| #define NRFX_SPI_H__ |
| |
| #include <nrfx.h> |
| #include <hal/nrf_spi.h> |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| * @defgroup nrfx_spi SPI driver |
| * @{ |
| * @ingroup nrf_spi |
| * @brief SPI peripheral driver. |
| */ |
| |
| /** |
| * @brief SPI master driver instance data structure. |
| */ |
| typedef struct |
| { |
| NRF_SPI_Type * p_reg; ///< Pointer to a structure with SPI registers. |
| uint8_t drv_inst_idx; ///< Driver instance index. |
| } nrfx_spi_t; |
| |
| enum { |
| #if NRFX_CHECK(NRFX_SPI0_ENABLED) |
| NRFX_SPI0_INST_IDX, |
| #endif |
| #if NRFX_CHECK(NRFX_SPI1_ENABLED) |
| NRFX_SPI1_INST_IDX, |
| #endif |
| #if NRFX_CHECK(NRFX_SPI2_ENABLED) |
| NRFX_SPI2_INST_IDX, |
| #endif |
| NRFX_SPI_ENABLED_COUNT |
| }; |
| |
| /** |
| * @brief Macro for creating an SPI master driver instance. |
| */ |
| #define NRFX_SPI_INSTANCE(id) \ |
| { \ |
| .p_reg = NRFX_CONCAT_2(NRF_SPI, id), \ |
| .drv_inst_idx = NRFX_CONCAT_3(NRFX_SPI, id, _INST_IDX), \ |
| } |
| |
| /** |
| * @brief This value can be provided instead of a pin number for signals MOSI, |
| * MISO, and Slave Select to specify that the given signal is not used and |
| * therefore does not need to be connected to a pin. |
| */ |
| #define NRFX_SPI_PIN_NOT_USED 0xFF |
| |
| /** |
| * @brief SPI master driver instance configuration structure. |
| */ |
| typedef struct |
| { |
| uint8_t sck_pin; ///< SCK pin number. |
| uint8_t mosi_pin; ///< MOSI pin number (optional). |
| /**< Set to @ref NRFX_SPI_PIN_NOT_USED |
| * if this signal is not needed. */ |
| uint8_t miso_pin; ///< MISO pin number (optional). |
| /**< Set to @ref NRFX_SPI_PIN_NOT_USED |
| * if this signal is not needed. */ |
| uint8_t ss_pin; ///< Slave Select pin number (optional). |
| /**< Set to @ref NRFX_SPI_PIN_NOT_USED |
| * if this signal is not needed. The driver |
| * supports only active low for this signal. |
| * If the signal should be active high, |
| * it must be controlled externally. */ |
| uint8_t irq_priority; ///< Interrupt priority. |
| uint8_t orc; ///< Over-run character. |
| /**< This character is used when all bytes from the TX buffer are sent, |
| but the transfer continues due to RX. */ |
| nrf_spi_frequency_t frequency; ///< SPI frequency. |
| nrf_spi_mode_t mode; ///< SPI mode. |
| nrf_spi_bit_order_t bit_order; ///< SPI bit order. |
| } nrfx_spi_config_t; |
| |
| /** |
| * @brief SPI master instance default configuration. |
| */ |
| #define NRFX_SPI_DEFAULT_CONFIG \ |
| { \ |
| .sck_pin = NRFX_SPI_PIN_NOT_USED, \ |
| .mosi_pin = NRFX_SPI_PIN_NOT_USED, \ |
| .miso_pin = NRFX_SPI_PIN_NOT_USED, \ |
| .ss_pin = NRFX_SPI_PIN_NOT_USED, \ |
| .irq_priority = NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY, \ |
| .orc = 0xFF, \ |
| .frequency = NRF_SPI_FREQ_4M, \ |
| .mode = NRF_SPI_MODE_0, \ |
| .bit_order = NRF_SPI_BIT_ORDER_MSB_FIRST, \ |
| } |
| |
| /** |
| * @brief Single transfer descriptor structure. |
| */ |
| typedef struct |
| { |
| uint8_t const * p_tx_buffer; ///< Pointer to TX buffer. |
| size_t tx_length; ///< TX buffer length. |
| uint8_t * p_rx_buffer; ///< Pointer to RX buffer. |
| size_t rx_length; ///< RX buffer length. |
| } nrfx_spi_xfer_desc_t; |
| |
| /** |
| * @brief Macro for setting up single transfer descriptor. |
| * |
| * This macro is for internal use only. |
| */ |
| #define NRFX_SPI_SINGLE_XFER(p_tx, tx_len, p_rx, rx_len) \ |
| { \ |
| .p_tx_buffer = (uint8_t const *)(p_tx), \ |
| .tx_length = (tx_len), \ |
| .p_rx_buffer = (p_rx), \ |
| .rx_length = (rx_len), \ |
| } |
| |
| /** |
| * @brief Macro for setting duplex TX RX transfer. |
| */ |
| #define NRFX_SPI_XFER_TRX(p_tx_buf, tx_length, p_rx_buf, rx_length) \ |
| NRFX_SPI_SINGLE_XFER(p_tx_buf, tx_length, p_rx_buf, rx_length) |
| |
| /** |
| * @brief Macro for setting TX transfer. |
| */ |
| #define NRFX_SPI_XFER_TX(p_buf, length) \ |
| NRFX_SPI_SINGLE_XFER(p_buf, length, NULL, 0) |
| |
| /** |
| * @brief Macro for setting RX transfer. |
| */ |
| #define NRFX_SPI_XFER_RX(p_buf, length) \ |
| NRFX_SPI_SINGLE_XFER(NULL, 0, p_buf, length) |
| |
| /** |
| * @brief SPI master driver event types, passed to the handler routine provided |
| * during initialization. |
| */ |
| typedef enum |
| { |
| NRFX_SPI_EVENT_DONE, ///< Transfer done. |
| } nrfx_spi_evt_type_t; |
| |
| typedef struct |
| { |
| nrfx_spi_evt_type_t type; ///< Event type. |
| nrfx_spi_xfer_desc_t xfer_desc; ///< Transfer details. |
| } nrfx_spi_evt_t; |
| |
| /** |
| * @brief SPI master driver event handler type. |
| */ |
| typedef void (* nrfx_spi_evt_handler_t)(nrfx_spi_evt_t const * p_event, |
| void * p_context); |
| |
| /** |
| * @brief Function for initializing the SPI master driver instance. |
| * |
| * This function configures and enables the specified peripheral. |
| * |
| * @param[in] p_instance Pointer to the driver instance structure. |
| * @param[in] p_config Pointer to the structure with initial configuration. |
| * |
| * @param handler Event handler provided by the user. If NULL, transfers |
| * will be performed in blocking mode. |
| * @param p_context Context passed to event handler. |
| * |
| * @retval NRFX_SUCCESS If initialization was successful. |
| * @retval NRFX_ERROR_INVALID_STATE If the driver was already initialized. |
| * @retval NRFX_ERROR_BUSY If some other peripheral with the same |
| * instance ID is already in use. This is |
| * possible only if @ref nrfx_prs module |
| * is enabled. |
| */ |
| nrfx_err_t nrfx_spi_init(nrfx_spi_t const * const p_instance, |
| nrfx_spi_config_t const * p_config, |
| nrfx_spi_evt_handler_t handler, |
| void * p_context); |
| |
| /** |
| * @brief Function for uninitializing the SPI master driver instance. |
| * |
| * @param[in] p_instance Pointer to the driver instance structure. |
| */ |
| void nrfx_spi_uninit(nrfx_spi_t const * const p_instance); |
| |
| /** |
| * @brief Function for starting the SPI data transfer. |
| * |
| * If an event handler was provided in the @ref nrfx_spi_init call, this function |
| * returns immediately and the handler is called when the transfer is done. |
| * Otherwise, the transfer is performed in blocking mode, which means that this function |
| * returns when the transfer is finished. |
| * |
| * @param p_instance Pointer to the driver instance structure. |
| * @param p_xfer_desc Pointer to the transfer descriptor. |
| * @param flags Transfer options (0 for default settings). |
| * Currently, no additional flags are available. |
| * |
| * @retval NRFX_SUCCESS If the procedure was successful. |
| * @retval NRFX_ERROR_BUSY If the driver is not ready for a new transfer. |
| * @retval NRFX_ERROR_NOT_SUPPORTED If the provided parameters are not supported. |
| */ |
| nrfx_err_t nrfx_spi_xfer(nrfx_spi_t const * const p_instance, |
| nrfx_spi_xfer_desc_t const * p_xfer_desc, |
| uint32_t flags); |
| |
| /** |
| * @brief Function for aborting ongoing transfer. |
| * |
| * @param[in] p_instance Pointer to the driver instance structure. |
| */ |
| void nrfx_spi_abort(nrfx_spi_t const * p_instance); |
| |
| |
| void nrfx_spi_0_irq_handler(void); |
| void nrfx_spi_1_irq_handler(void); |
| void nrfx_spi_2_irq_handler(void); |
| |
| |
| /** @} */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif // NRFX_SPI_H__ |