/*!
 * \file      radio.h
 *
 * \brief     Radio driver API definition
 *
 * \copyright Revised BSD License, see section \ref LICENSE.
 *
 * \code
 *                ______                              _
 *               / _____)             _              | |
 *              ( (____  _____ ____ _| |_ _____  ____| |__
 *               \____ \| ___ |    (_   _) ___ |/ ___)  _ \
 *               _____) ) ____| | | || |_| ____( (___| | | |
 *              (______/|_____)_|_|_| \__)_____)\____)_| |_|
 *              (C)2013-2017 Semtech
 *
 * \endcode
 *
 * \author    Miguel Luis ( Semtech )
 *
 * \author    Gregory Cristian ( Semtech )
 */
#ifndef __RADIO_H__
#define __RADIO_H__

#include <stdint.h>
#include <stdbool.h>

/*!
 * Radio driver supported modems
 */
typedef enum
{
    MODEM_FSK = 0,
    MODEM_LORA,
}RadioModems_t;

/*!
 * Radio driver internal state machine states definition
 */
typedef enum
{
    RF_IDLE = 0,   //!< The radio is idle
    RF_RX_RUNNING, //!< The radio is in reception state
    RF_TX_RUNNING, //!< The radio is in transmission state
    RF_CAD,        //!< The radio is doing channel activity detection
}RadioState_t;

/*!
 * \brief Radio driver callback functions
 */
typedef struct
{
    /*!
     * \brief  Tx Done callback prototype.
     */
    void    ( *TxDone )( void );
    /*!
     * \brief  Tx Timeout callback prototype.
     */
    void    ( *TxTimeout )( void );
    /*!
     * \brief Rx Done callback prototype.
     *
     * \param [IN] payload Received buffer pointer
     * \param [IN] size    Received buffer size
     * \param [IN] rssi    RSSI value computed while receiving the frame [dBm]
     * \param [IN] snr     Raw SNR value given by the radio hardware
     *                     FSK : N/A ( set to 0 )
     *                     LoRa: SNR value in dB
     */
    void    ( *RxDone )( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr );
    /*!
     * \brief  Rx Timeout callback prototype.
     */
    void    ( *RxTimeout )( void );
    /*!
     * \brief Rx Error callback prototype.
     */
    void    ( *RxError )( void );
    /*!
     * \brief  FHSS Change Channel callback prototype.
     *
     * \param [IN] currentChannel   Index number of the current channel
     */
    void ( *FhssChangeChannel )( uint8_t currentChannel );

    /*!
     * \brief CAD Done callback prototype.
     *
     * \param [IN] channelDetected    Channel Activity detected during the CAD
     */
    void ( *CadDone ) ( bool channelActivityDetected );
}RadioEvents_t;

/*!
 * \brief Radio driver definition
 */
struct Radio_s
{
    /*!
     * \brief Initializes the radio
     *
     * \param [IN] events Structure containing the driver callback functions
     */
    void    ( *Init )( RadioEvents_t *events );
    /*!
     * Return current radio status
     *
     * \param status Radio status.[RF_IDLE, RF_RX_RUNNING, RF_TX_RUNNING]
     */
    RadioState_t ( *GetStatus )( void );
    /*!
     * \brief Configures the radio with the given modem
     *
     * \param [IN] modem Modem to be used [0: FSK, 1: LoRa]
     */
    void    ( *SetModem )( RadioModems_t modem );
    /*!
     * \brief Sets the channel frequency
     *
     * \param [IN] freq         Channel RF frequency
     */
    void    ( *SetChannel )( uint32_t freq );
    /*!
     * \brief Checks if the channel is free for the given time
     *
     * \param [IN] modem      Radio modem to be used [0: FSK, 1: LoRa]
     * \param [IN] freq       Channel RF frequency
     * \param [IN] rssiThresh RSSI threshold
     * \param [IN] maxCarrierSenseTime Max time while the RSSI is measured
     *
     * \retval isFree         [true: Channel is free, false: Channel is not free]
     */
    bool    ( *IsChannelFree )( RadioModems_t modem, uint32_t freq, int16_t rssiThresh, uint32_t maxCarrierSenseTime );
    /*!
     * \brief Generates a 32 bits random value based on the RSSI readings
     *
     * \remark This function sets the radio in LoRa modem mode and disables
     *         all interrupts.
     *         After calling this function either Radio.SetRxConfig or
     *         Radio.SetTxConfig functions must be called.
     *
     * \retval randomValue    32 bits random value
     */
    uint32_t ( *Random )( void );
    /*!
     * \brief Sets the reception parameters
     *
     * \param [IN] modem        Radio modem to be used [0: FSK, 1: LoRa]
     * \param [IN] bandwidth    Sets the bandwidth
     *                          FSK : >= 2600 and <= 250000 Hz
     *                          LoRa: [0: 125 kHz, 1: 250 kHz,
     *                                 2: 500 kHz, 3: Reserved]
     * \param [IN] datarate     Sets the Datarate
     *                          FSK : 600..300000 bits/s
     *                          LoRa: [6: 64, 7: 128, 8: 256, 9: 512,
     *                                10: 1024, 11: 2048, 12: 4096  chips]
     * \param [IN] coderate     Sets the coding rate (LoRa only)
     *                          FSK : N/A ( set to 0 )
     *                          LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
     * \param [IN] bandwidthAfc Sets the AFC Bandwidth (FSK only)
     *                          FSK : >= 2600 and <= 250000 Hz
     *                          LoRa: N/A ( set to 0 )
     * \param [IN] preambleLen  Sets the Preamble length
     *                          FSK : Number of bytes
     *                          LoRa: Length in symbols (the hardware adds 4 more symbols)
     * \param [IN] symbTimeout  Sets the RxSingle timeout value
     *                          FSK : timeout in number of bytes
     *                          LoRa: timeout in symbols
     * \param [IN] fixLen       Fixed length packets [0: variable, 1: fixed]
     * \param [IN] payloadLen   Sets payload length when fixed length is used
     * \param [IN] crcOn        Enables/Disables the CRC [0: OFF, 1: ON]
     * \param [IN] freqHopOn    Enables disables the intra-packet frequency hopping
     *                          FSK : N/A ( set to 0 )
     *                          LoRa: [0: OFF, 1: ON]
     * \param [IN] hopPeriod    Number of symbols between each hop
     *                          FSK : N/A ( set to 0 )
     *                          LoRa: Number of symbols
     * \param [IN] iqInverted   Inverts IQ signals (LoRa only)
     *                          FSK : N/A ( set to 0 )
     *                          LoRa: [0: not inverted, 1: inverted]
     * \param [IN] rxContinuous Sets the reception in continuous mode
     *                          [false: single mode, true: continuous mode]
     */
    void    ( *SetRxConfig )( RadioModems_t modem, uint32_t bandwidth,
                              uint32_t datarate, uint8_t coderate,
                              uint32_t bandwidthAfc, uint16_t preambleLen,
                              uint16_t symbTimeout, bool fixLen,
                              uint8_t payloadLen,
                              bool crcOn, bool freqHopOn, uint8_t hopPeriod,
                              bool iqInverted, bool rxContinuous );
    /*!
     * \brief Sets the transmission parameters
     *
     * \param [IN] modem        Radio modem to be used [0: FSK, 1: LoRa]
     * \param [IN] power        Sets the output power [dBm]
     * \param [IN] fdev         Sets the frequency deviation (FSK only)
     *                          FSK : [Hz]
     *                          LoRa: 0
     * \param [IN] bandwidth    Sets the bandwidth (LoRa only)
     *                          FSK : 0
     *                          LoRa: [0: 125 kHz, 1: 250 kHz,
     *                                 2: 500 kHz, 3: Reserved]
     * \param [IN] datarate     Sets the Datarate
     *                          FSK : 600..300000 bits/s
     *                          LoRa: [6: 64, 7: 128, 8: 256, 9: 512,
     *                                10: 1024, 11: 2048, 12: 4096  chips]
     * \param [IN] coderate     Sets the coding rate (LoRa only)
     *                          FSK : N/A ( set to 0 )
     *                          LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
     * \param [IN] preambleLen  Sets the preamble length
     *                          FSK : Number of bytes
     *                          LoRa: Length in symbols (the hardware adds 4 more symbols)
     * \param [IN] fixLen       Fixed length packets [0: variable, 1: fixed]
     * \param [IN] crcOn        Enables disables the CRC [0: OFF, 1: ON]
     * \param [IN] freqHopOn    Enables disables the intra-packet frequency hopping
     *                          FSK : N/A ( set to 0 )
     *                          LoRa: [0: OFF, 1: ON]
     * \param [IN] hopPeriod    Number of symbols between each hop
     *                          FSK : N/A ( set to 0 )
     *                          LoRa: Number of symbols
     * \param [IN] iqInverted   Inverts IQ signals (LoRa only)
     *                          FSK : N/A ( set to 0 )
     *                          LoRa: [0: not inverted, 1: inverted]
     * \param [IN] timeout      Transmission timeout [ms]
     */
    void    ( *SetTxConfig )( RadioModems_t modem, int8_t power, uint32_t fdev,
                              uint32_t bandwidth, uint32_t datarate,
                              uint8_t coderate, uint16_t preambleLen,
                              bool fixLen, bool crcOn, bool freqHopOn,
                              uint8_t hopPeriod, bool iqInverted, uint32_t timeout );
    /*!
     * \brief Checks if the given RF frequency is supported by the hardware
     *
     * \param [IN] frequency RF frequency to be checked
     * \retval isSupported [true: supported, false: unsupported]
     */
    bool    ( *CheckRfFrequency )( uint32_t frequency );
    /*!
     * \brief Computes the packet time on air in ms for the given payload
     *
     * \Remark Can only be called once SetRxConfig or SetTxConfig have been called
     *
     * \param [IN] modem      Radio modem to be used [0: FSK, 1: LoRa]
     * \param [IN] pktLen     Packet payload length
     *
     * \retval airTime        Computed airTime (ms) for the given packet payload length
     */
    uint32_t  ( *TimeOnAir )( RadioModems_t modem, uint8_t pktLen );
    /*!
     * \brief Sends the buffer of size. Prepares the packet to be sent and sets
     *        the radio in transmission
     *
     * \param [IN]: buffer     Buffer pointer
     * \param [IN]: size       Buffer size
     */
    void    ( *Send )( uint8_t *buffer, uint8_t size );
    /*!
     * \brief Sets the radio in sleep mode
     */
    void    ( *Sleep )( void );
    /*!
     * \brief Sets the radio in standby mode
     */
    void    ( *Standby )( void );
    /*!
     * \brief Sets the radio in reception mode for the given time
     * \param [IN] timeout Reception timeout [ms]
     *                     [0: continuous, others timeout]
     */
    void    ( *Rx )( uint32_t timeout );
    /*!
     * \brief Start a Channel Activity Detection
     */
    void    ( *StartCad )( void );
    /*!
     * \brief Sets the radio in continuous wave transmission mode
     *
     * \param [IN]: freq       Channel RF frequency
     * \param [IN]: power      Sets the output power [dBm]
     * \param [IN]: time       Transmission mode timeout [s]
     */
    void    ( *SetTxContinuousWave )( uint32_t freq, int8_t power, uint16_t time );
    /*!
     * \brief Reads the current RSSI value
     *
     * \retval rssiValue Current RSSI value in [dBm]
     */
    int16_t ( *Rssi )( RadioModems_t modem );
    /*!
     * \brief Writes the radio register at the specified address
     *
     * \param [IN]: addr Register address
     * \param [IN]: data New register value
     */
    void    ( *Write )( uint16_t addr, uint8_t data );
    /*!
     * \brief Reads the radio register at the specified address
     *
     * \param [IN]: addr Register address
     * \retval data Register value
     */
    uint8_t ( *Read )( uint16_t addr );
    /*!
     * \brief Writes multiple radio registers starting at address
     *
     * \param [IN] addr   First Radio register address
     * \param [IN] buffer Buffer containing the new register's values
     * \param [IN] size   Number of registers to be written
     */
    void    ( *WriteBuffer )( uint16_t addr, uint8_t *buffer, uint8_t size );
    /*!
     * \brief Reads multiple radio registers starting at address
     *
     * \param [IN] addr First Radio register address
     * \param [OUT] buffer Buffer where to copy the registers data
     * \param [IN] size Number of registers to be read
     */
    void    ( *ReadBuffer )( uint16_t addr, uint8_t *buffer, uint8_t size );
    /*!
     * \brief Sets the maximum payload length.
     *
     * \param [IN] modem      Radio modem to be used [0: FSK, 1: LoRa]
     * \param [IN] max        Maximum payload length in bytes
     */
    void    ( *SetMaxPayloadLength )( RadioModems_t modem, uint8_t max );
    /*!
     * \brief Sets the network to public or private. Updates the sync byte.
     *
     * \remark Applies to LoRa modem only
     *
     * \param [IN] enable if true, it enables a public network
     */
    void    ( *SetPublicNetwork )( bool enable );
    /*!
     * \brief Gets the time required for the board plus radio to get out of sleep.[ms]
     *
     * \retval time Radio plus board wakeup time in ms.
     */
    uint32_t  ( *GetWakeupTime )( void );

    /*!
     * \brief Disables receive irq, puts chip in standby and clears any pending
     * rx interrupts
     *
     */
    void  ( *RxDisable )( void );
};

/*!
 * \brief Radio driver
 *
 * \remark This variable is defined and initialized in the specific radio
 *         board implementation
 */
extern const struct Radio_s Radio;

#endif // __RADIO_H__