blob: 3d8cf22708c9008575ab9a013772b24d17b693bf [file] [log] [blame]
/* Linker script for Nordic Semiconductor nRF5 devices
*
* Version: Sourcery G++ 4.5-1
* Support: https://support.codesourcery.com/GNUToolchain/
*
* Copyright (c) 2007, 2008, 2009, 2010 CodeSourcery, Inc.
*
* The authors hereby grant permission to use, copy, modify, distribute,
* and license this software and its documentation for any purpose, provided
* that existing copyright notices are retained in all copies and that this
* notice is included verbatim in any distributions. No written agreement,
* license, or royalty fee is required for any of the authorized uses.
* Modifications to this software may be copyrighted by their authors
* and need not follow the licensing terms described here, provided that
* the new terms are clearly indicated on the first page of each file where
* they apply.
*/
OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
MEMORY
{
FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x80000
RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x10000
}
/* Linker script to place sections and symbol values. Should be used together
* with other linker script that defines memory regions FLASH and RAM.
* It references following symbols, which must be defined in code:
* Reset_Handler : Entry of reset handler
*
* It defines following symbols, which code can use without definition:
* __exidx_start
* __exidx_end
* __etext
* __data_start__
* __preinit_array_start
* __preinit_array_end
* __init_array_start
* __init_array_end
* __fini_array_start
* __fini_array_end
* __data_end__
* __bss_start__
* __bss_end__
* __HeapBase
* __HeapLimit
* __StackLimit
* __StackTop
* __stack
* __bssnz_start__
* __bssnz_end__
*/
ENTRY(Reset_Handler)
SECTIONS
{
__text = .;
.text :
{
__isr_vector_start = .;
KEEP(*(.isr_vector))
__isr_vector_end = .;
*(.text*)
KEEP(*(.init))
KEEP(*(.fini))
/* .ctors */
*crtbegin.o(.ctors)
*crtbegin?.o(.ctors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
*(SORT(.ctors.*))
*(.ctors)
/* .dtors */
*crtbegin.o(.dtors)
*crtbegin?.o(.dtors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
*(SORT(.dtors.*))
*(.dtors)
*(.rodata*)
*(.eh_frame*)
. = ALIGN(4);
} > FLASH
.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
. = ALIGN(4);
} > FLASH
__exidx_start = .;
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
. = ALIGN(4);
} > FLASH
__exidx_end = .;
__etext = .;
.vector_relocation :
{
. = ALIGN(4);
__vector_tbl_reloc__ = .;
. = . + (__isr_vector_end - __isr_vector_start);
. = ALIGN(4);
} > RAM
.data : AT (__etext)
{
__data_start__ = .;
*(vtable)
*(.data*)
. = ALIGN(4);
/* preinit data */
PROVIDE_HIDDEN (__preinit_array_start = .);
*(.preinit_array)
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(4);
/* init data */
PROVIDE_HIDDEN (__init_array_start = .);
*(SORT(.init_array.*))
*(.init_array)
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(4);
/* finit data */
PROVIDE_HIDDEN (__fini_array_start = .);
*(SORT(.fini_array.*))
*(.fini_array)
PROVIDE_HIDDEN (__fini_array_end = .);
*(.jcr)
. = ALIGN(4);
/* All data end */
__data_end__ = .;
} > RAM
/* Non-zeroed BSS. This section is similar to BSS, with the following
* caveat:
* 1. It does not get zeroed at init-time.
*/
.bssnz :
{
. = ALIGN(4);
__bssnz_start__ = .;
*(.bss.core.nz*)
. = ALIGN(4);
__bssnz_end__ = .;
} > RAM
.bss :
{
. = ALIGN(4);
__bss_start__ = .;
*(.bss*)
*(COMMON)
. = ALIGN(4);
__bss_end__ = .;
} > RAM
/* Heap starts after BSS */
. = ALIGN(8);
__HeapBase = .;
/* .stack_dummy section doesn't contains any symbols. It is only
* used for linker to calculate size of stack sections, and assign
* values to stack symbols later */
.stack_dummy (COPY):
{
*(.stack*)
} > RAM
/* Set stack top to end of RAM, and stack limit move down by
* size of stack_dummy section */
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
PROVIDE(__stack = __StackTop);
/* Top of head is the bottom of the stack */
__HeapLimit = __StackLimit;
/* Check if data + heap + stack exceeds RAM limit */
ASSERT(__HeapBase <= __HeapLimit, "region RAM overflowed with stack")
}