blob: 6d3de0930e6acd633b3575e55274a8b1955c1327 [file] [log] [blame]
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
#
# Package: hw/bsp/rb-blend2
syscfg.defs:
BSP_NRF52:
description: 'Set to indicate that BSP has NRF52'
value: 1
UART_0:
description: 'Whether to enable UART0'
value: 1
UART_0_PIN_TX:
description: 'TX pin for UART0'
value: 6
UART_0_PIN_RX:
description: 'RX pin for UART0'
value: 8
UART_0_PIN_RTS:
description: 'RTS pin for UART0'
value: 7
UART_0_PIN_CTS:
description: 'CTS pin for UART0'
value: 5
UART_1:
description: 'Whether to enable bitbanger UART1'
value: 0
UART_1_PIN_TX:
description: 'TX pin for UART1'
value: 12
UART_1_PIN_RX:
description: 'RX pin for UART1'
value: 11
SPI_0_MASTER_PIN_SCK:
description: 'SCK pin for SPI_0_MASTER'
value: 20
SPI_0_MASTER_PIN_MOSI:
description: 'MOSI pin for SPI_0_MASTER'
value: 23
SPI_0_MASTER_PIN_MISO:
description: 'MISO pin for SPI_0_MASTER'
value: 24
SPI_0_SLAVE_PIN_SCK:
description: 'SCK pin for SPI_0_SLAVE'
value: 20
SPI_0_SLAVE_PIN_MOSI:
description: 'MOSI pin for SPI_0_SLAVE'
value: 23
SPI_0_SLAVE_PIN_MISO:
description: 'MISO pin for SPI_0_SLAVE'
value: 24
SPI_0_SLAVE_PIN_SS:
description: 'SS pin for SPI_0_SLAVE'
value: 22
I2C_0_PIN_SCL:
description: 'SCL pin for I2C_0'
value: 27
I2C_0_PIN_SDA:
description: 'SDA pin for I2C_0'
value: 26
I2C_0_FREQ_KHZ:
description: 'Frequency in khz for I2C_0 bus'
value: 100
TIMER_0:
description: 'NRF52 Timer 0'
value: 1
TIMER_1:
description: 'NRF52 Timer 1'
value: 0
TIMER_2:
description: 'NRF52 Timer 2'
value: 0
TIMER_3:
description: 'NRF52 Timer 3'
value: 0
TIMER_4:
description: 'NRF52 Timer 4'
value: 0
TIMER_5:
description: 'NRF52 RTC 0'
value: 0
syscfg.defs.BLE_LP_CLOCK:
TIMER_0:
value: 0
TIMER_5:
value: 1
syscfg.vals:
CONFIG_FCB_FLASH_AREA: FLASH_AREA_NFFS
REBOOT_LOG_FLASH_AREA: FLASH_AREA_REBOOT_LOG
NFFS_FLASH_AREA: FLASH_AREA_NFFS
COREDUMP_FLASH_AREA: FLASH_AREA_IMAGE_1
MCU_DCDC_ENABLED: 1
XTAL_32768: 1
syscfg.vals.BLE_LP_CLOCK:
OS_CPUTIME_FREQ: 32768
OS_CPUTIME_TIMER_NUM: 5
BLE_XTAL_SETTLE_TIME: 1500