#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#  http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
#

# Package: hw/bsp/frdm-k64f

syscfg.defs:
    BSP_MK64F12:
        description: 'Set to indicate that BSP has NXP MK64F12'
        value: 1

    # UART0 PINS on CMSIS-DAP Interface
    UART_0:
        description: 'Whether to enable UART0'
        value:  1
    UART_0_PORT:
        description: 'GPIO port for UART0 pins'
        value:  PORTB
    UART_0_PORT_CLOCK:
        description: 'Clock to enable for UART0 pins'
        value:  kCLOCK_PortB
    UART_0_PIN_TX:
        description: 'TX pin for UART0'
        value:  16
    UART_0_PIN_RX:
        description: 'RX pin for UART0'
        value:  17

    # PINS conflict with SPI0 must choose 1
    UART_1:
        description: 'Whether to enable UART1'
        value:  0
    UART_1_PORT:
        description: 'GPIO port for UART1 pins'
        value:  PORTC
    UART_1_PORT_CLOCK:
        description: 'Clock to enable for UART1 pins'
        value:  kCLOCK_PortC
    UART_1_PIN_TX:
        description: 'TX pin for UART1'
        value:  3
    UART_1_PIN_RX:
        description: 'RX pin for UART1x'
        value:  4

    # PINS conflict with SPI0 must choose 1
    UART_2:
        description: 'Whether to enable UART2'
        value:  0
    UART_2_PORT:
        description: 'GPIO port for UART2 pins'
        value:  PORTD
    UART_2_PORT_CLOCK:
        description: 'Clock to enable for UART2 pins'
        value:  kCLOCK_PortD
    UART_2_PIN_TX:
        description: 'TX pin for UART2'
        value:  2
    UART_2_PIN_RX:
        description: 'RX pin for UART2'
        value:  3

    # PINS conflict with ENET0 must choose 1
    UART_3:
        description: 'Whether to enable UART3'
        value:  0
    UART_3_PORT:
        description: 'GPIO port for UART3 pins'
        value:  PORTC
    UART_3_PORT_CLOCK:
        description: 'Clock to enable for UART3 pins'
        value:  kCLOCK_PortC
    UART_3_PIN_TX:
        description: 'TX pin for UART3'
        value:  16
    UART_3_PIN_RX:
        description: 'RX pin for UART3'
        value:  17

    # PINS conflict with ENET0 must choose 1
    UART_4:
        description: 'Whether to enable UART4'
        value:  0
    UART_4_PORT:
        description: 'GPIO port for UART4 pins'
        value:  PORTC
    UART_4_PORT_CLOCK:
        description: 'Clock to enable for UART4 pins'
        value:  kCLOCK_PortC
    UART_4_PIN_TX:
        description: 'TX pin for UART4'
        value:  14
    UART_4_PIN_RX:
        description: 'RX pin for UART4'
        value:  15

    # PINS conflict with I2S0 must choose 1
    UART_5:
        description: 'Whether to enable UART5'
        value:  0
    UART_5_PORT:
        description: 'GPIO port for UART5 pins'
        value:  PORTE
    UART_5_PORT_CLOCK:
        description: 'Clock to enable for UART5 pins'
        value:  kCLOCK_PortE
    UART_5_PIN_TX:
        description: 'TX pin for UART5'
        value:  9
    UART_5_PIN_RX:
        description: 'RX pin for UART5'
        value:  8

syscfg.vals:
    CONFIG_FCB_FLASH_AREA: FLASH_AREA_NFFS
    REBOOT_LOG_FLASH_AREA: FLASH_AREA_REBOOT_LOG
    NFFS_FLASH_AREA: FLASH_AREA_NFFS
    COREDUMP_FLASH_AREA: FLASH_AREA_IMAGE_1