/** | |
****************************************************************************** | |
* @file stm32l0xx.h | |
* @author MCD Application Team | |
* @brief CMSIS Cortex-M0+ Device Peripheral Access Layer Header File. | |
* This file contains all the peripheral register's definitions, bits | |
* definitions and memory mapping for STM32L0xx devices. | |
* | |
* The file is the unique include file that the application programmer | |
* is using in the C source code, usually in main.c. This file contains: | |
* - Configuration section that allows to select: | |
* - The device used in the target application | |
* - To use or not the peripheral's drivers in application code(i.e. | |
* code will be based on direct access to peripheral's registers | |
* rather than drivers API), this option is controlled by | |
* "#define USE_HAL_DRIVER" | |
* | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/** @addtogroup CMSIS | |
* @{ | |
*/ | |
/** @addtogroup stm32l0xx | |
* @{ | |
*/ | |
#ifndef __STM32L0xx_H | |
#define __STM32L0xx_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif /* __cplusplus */ | |
/** @addtogroup Library_configuration_section | |
* @{ | |
*/ | |
/** | |
* @brief STM32 Family | |
*/ | |
#if !defined (STM32L0) | |
#define STM32L0 | |
#endif /* STM32L0 */ | |
/* Uncomment the line below according to the target STM32 device used in your | |
application | |
*/ | |
#if !defined (STM32L011xx) && !defined (STM32L021xx) && \ | |
!defined (STM32L031xx) && !defined (STM32L041xx) && \ | |
!defined (STM32L051xx) && !defined (STM32L052xx) && !defined (STM32L053xx) && \ | |
!defined (STM32L061xx) && !defined (STM32L062xx) && !defined (STM32L063xx) && \ | |
!defined (STM32L071xx) && !defined (STM32L072xx) && !defined (STM32L073xx) && \ | |
!defined (STM32L081xx) && !defined (STM32L082xx) && !defined (STM32L083xx) \ | |
/* #define STM32L011xx */ | |
/* #define STM32L021xx */ | |
/* #define STM32L031xx */ /*!< STM32L031C6, STM32L031E6, STM32L031F6, STM32L031G6, STM32L031K6 Devices */ | |
/* #define STM32L041xx */ /*!< STM32L041C6, STM32L041E6, STM32L041F6, STM32L041G6, STM32L041K6 Devices */ | |
/* #define STM32L051xx */ /*!< STM32L051K8, STM32L051C6, STM32L051C8, STM32L051R6, STM32L051R8 Devices */ | |
/* #define STM32L052xx */ /*!< STM32L052K6, STM32L052K8, STM32L052C6, STM32L052C8, STM32L052R6, STM32L052R8 Devices */ | |
/* #define STM32L053xx */ /*!< STM32L053C6, STM32L053C8, STM32L053R6, STM32L053R8 Devices */ | |
/* #define STM32L061xx */ /*!< */ | |
/* #define STM32L062xx */ /*!< STM32L062K8 */ | |
/* #define STM32L063xx */ /*!< STM32L063C8, STM32L063R8 */ | |
/* #define STM32L071xx */ /*!< */ | |
/* #define STM32L072xx */ /*!< */ | |
/* #define STM32L073xx */ /*!< STM32L073V8, STM32L073VB, STM32L073RB, STM32L073VZ, STM32L073RZ Devices */ | |
/* #define STM32L081xx */ /*!< */ | |
/* #define STM32L082xx */ /*!< */ | |
/* #define STM32L083xx */ /*!< */ | |
#endif | |
/* Tip: To avoid modifying this file each time you need to switch between these | |
devices, you can define the device in your toolchain compiler preprocessor. | |
*/ | |
#if !defined (USE_HAL_DRIVER) | |
/** | |
* @brief Comment the line below if you will not use the peripherals drivers. | |
In this case, these drivers will not be included and the application code will | |
be based on direct access to peripherals registers | |
*/ | |
/*#define USE_HAL_DRIVER */ | |
#endif /* USE_HAL_DRIVER */ | |
/** | |
* @brief CMSIS Device version number V1.7.1 | |
*/ | |
#define __STM32L0xx_CMSIS_VERSION_MAIN (0x01) /*!< [31:24] main version */ | |
#define __STM32L0xx_CMSIS_VERSION_SUB1 (0x07) /*!< [23:16] sub1 version */ | |
#define __STM32L0xx_CMSIS_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */ | |
#define __STM32L0xx_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ | |
#define __STM32L0xx_CMSIS_VERSION ((__STM32L0xx_CMSIS_VERSION_MAIN << 24)\ | |
|(__STM32L0xx_CMSIS_VERSION_SUB1 << 16)\ | |
|(__STM32L0xx_CMSIS_VERSION_SUB2 << 8 )\ | |
|(__STM32L0xx_CMSIS_VERSION_RC)) | |
/** | |
* @} | |
*/ | |
/** @addtogroup Device_Included | |
* @{ | |
*/ | |
#if defined(STM32L011xx) | |
#include "stm32l011xx.h" | |
#elif defined(STM32L021xx) | |
#include "stm32l021xx.h" | |
#elif defined(STM32L031xx) | |
#include "stm32l031xx.h" | |
#elif defined(STM32L041xx) | |
#include "stm32l041xx.h" | |
#elif defined(STM32L051xx) | |
#include "stm32l051xx.h" | |
#elif defined(STM32L052xx) | |
#include "stm32l052xx.h" | |
#elif defined(STM32L053xx) | |
#include "stm32l053xx.h" | |
#elif defined(STM32L062xx) | |
#include "stm32l062xx.h" | |
#elif defined(STM32L063xx) | |
#include "stm32l063xx.h" | |
#elif defined(STM32L061xx) | |
#include "stm32l061xx.h" | |
#elif defined(STM32L071xx) | |
#include "stm32l071xx.h" | |
#elif defined(STM32L072xx) | |
#include "stm32l072xx.h" | |
#elif defined(STM32L073xx) | |
#include "stm32l073xx.h" | |
#elif defined(STM32L082xx) | |
#include "stm32l082xx.h" | |
#elif defined(STM32L083xx) | |
#include "stm32l083xx.h" | |
#elif defined(STM32L081xx) | |
#include "stm32l081xx.h" | |
#else | |
#error "Please select first the target STM32L0xx device used in your application (in stm32l0xx.h file)" | |
#endif | |
/** | |
* @} | |
*/ | |
/** @addtogroup Exported_types | |
* @{ | |
*/ | |
typedef enum | |
{ | |
RESET = 0, | |
SET = !RESET | |
} FlagStatus, ITStatus; | |
typedef enum | |
{ | |
DISABLE = 0, | |
ENABLE = !DISABLE | |
} FunctionalState; | |
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) | |
typedef enum | |
{ | |
ERROR = 0, | |
SUCCESS = !ERROR | |
} ErrorStatus; | |
/** | |
* @} | |
*/ | |
/** @addtogroup Exported_macro | |
* @{ | |
*/ | |
#define SET_BIT(REG, BIT) ((REG) |= (BIT)) | |
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) | |
#define READ_BIT(REG, BIT) ((REG) & (BIT)) | |
#define CLEAR_REG(REG) ((REG) = (0x0)) | |
#define WRITE_REG(REG, VAL) ((REG) = (VAL)) | |
#define READ_REG(REG) ((REG)) | |
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) | |
/** | |
* @} | |
*/ | |
#if defined (USE_HAL_DRIVER) | |
#include "stm32l0xx_hal.h" | |
#endif /* USE_HAL_DRIVER */ | |
#ifdef __cplusplus | |
} | |
#endif /* __cplusplus */ | |
#endif /* __STM32L0xx_H */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |