/** | |
****************************************************************************** | |
* @file stm32l0xx_hal_adc_ex.h | |
* @author MCD Application Team | |
* @brief Header file of ADC HAL extended module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32L0xx_HAL_ADC_EX_H | |
#define __STM32L0xx_HAL_ADC_EX_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32l0xx_hal_def.h" | |
/** @addtogroup STM32L0xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup ADCEx | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup ADCEx_Exported_Constants ADC Extended Exported Constants | |
* @{ | |
*/ | |
/** @defgroup ADCEx_Channel_Mode ADC Single Ended | |
* @{ | |
*/ | |
#define ADC_SINGLE_ENDED (uint32_t)0x00000000U /* dummy value */ | |
/** | |
* @} | |
*/ | |
/** @defgroup ADC_regular_external_trigger_source ADC External Trigger Source | |
* @{ | |
*/ | |
#define ADC_EXTERNALTRIGCONV_T6_TRGO ((uint32_t)0x00000000U) | |
#define ADC_EXTERNALTRIGCONV_T21_CC2 (ADC_CFGR1_EXTSEL_0) | |
#define ADC_EXTERNALTRIGCONV_T2_TRGO (ADC_CFGR1_EXTSEL_1) | |
#define ADC_EXTERNALTRIGCONV_T2_CC4 (ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0) | |
#define ADC_EXTERNALTRIGCONV_T22_TRGO (ADC_CFGR1_EXTSEL_2) | |
#define ADC_EXTERNALTRIGCONV_T3_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1) | |
#define ADC_EXTERNALTRIGCONV_EXT_IT11 (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0) | |
#define ADC_SOFTWARE_START (ADC_CFGR1_EXTSEL + (uint32_t)1) | |
/* ADC group regular external trigger TIM21_TRGO available only on */ | |
/* STM32L0 devices categories: Cat.2, Cat.3, Cat.5 */ | |
#if defined (STM32L031xx) || defined (STM32L041xx) || \ | |
defined (STM32L051xx) || defined (STM32L052xx) || defined (STM32L053xx) || \ | |
defined (STM32L061xx) || defined (STM32L062xx) || defined (STM32L063xx) || \ | |
defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || \ | |
defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) | |
#define ADC_EXTERNALTRIGCONV_T21_TRGO (ADC_EXTERNALTRIGCONV_T22_TRGO) | |
#endif | |
/* ADC group regular external trigger TIM2_CC3 available only on */ | |
/* STM32L0 devices categories: Cat.1, Cat.2, Cat.5 */ | |
#if defined (STM32L011xx) || defined (STM32L021xx) || \ | |
defined (STM32L031xx) || defined (STM32L041xx) || \ | |
defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || \ | |
defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) | |
#define ADC_EXTERNALTRIGCONV_T2_CC3 (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_0) | |
#endif | |
/** | |
* @} | |
*/ | |
/** @defgroup ADC_SYSCFG_internal_paths_flags_definition ADC SYSCFG internal paths Flags Definition | |
* @{ | |
*/ | |
#define ADC_FLAG_SENSOR SYSCFG_CFGR3_VREFINT_RDYF | |
#define ADC_FLAG_VREFINT SYSCFG_VREFINT_ADC_RDYF | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private macros ------------------------------------------------------------*/ | |
/** @defgroup ADCEx_Private_Macros ADCEx Private Macros | |
* @{ | |
*/ | |
#define IS_ADC_SINGLE_DIFFERENTIAL(SING_DIFF) ((SING_DIFF) == ADC_SINGLE_ENDED) | |
/** @defgroup ADCEx_calibration_factor_length_verification ADC Calibration Factor Length Verification | |
* @{ | |
*/ | |
/** | |
* @brief Calibration factor length verification (7 bits maximum) | |
* @param _Calibration_Factor_: Calibration factor value | |
* @retval None | |
*/ | |
#define IS_ADC_CALFACT(_Calibration_Factor_) ((_Calibration_Factor_) <= ((uint32_t)0x7FU)) | |
/** | |
* @} | |
*/ | |
/** @defgroup ADC_External_trigger_Source ADC External Trigger Source | |
* @{ | |
*/ | |
#if defined (STM32L031xx) || defined (STM32L041xx) || \ | |
defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || \ | |
defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) | |
#define IS_ADC_EXTTRIG(CONV) (((CONV) == ADC_EXTERNALTRIGCONV_T6_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T21_CC2 ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T2_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T2_CC4 ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T22_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T21_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T2_CC3 ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T3_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_EXT_IT11 ) || \ | |
((CONV) == ADC_SOFTWARE_START)) | |
#elif defined (STM32L011xx) || defined (STM32L021xx) | |
#define IS_ADC_EXTTRIG(CONV) (((CONV) == ADC_EXTERNALTRIGCONV_T6_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T21_CC2 ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T2_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T2_CC4 ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T22_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T2_CC3 ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T3_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_EXT_IT11 ) || \ | |
((CONV) == ADC_SOFTWARE_START)) | |
#elif defined (STM32L051xx) || defined (STM32L052xx) || defined (STM32L053xx) || \ | |
defined (STM32L061xx) || defined (STM32L062xx) || defined (STM32L063xx) | |
#define IS_ADC_EXTTRIG(CONV) (((CONV) == ADC_EXTERNALTRIGCONV_T6_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T21_CC2 ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T2_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T2_CC4 ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T22_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T21_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_T3_TRGO ) || \ | |
((CONV) == ADC_EXTERNALTRIGCONV_EXT_IT11 ) || \ | |
((CONV) == ADC_SOFTWARE_START)) | |
#endif | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported functions --------------------------------------------------------*/ | |
/** @addtogroup ADCEx_Exported_Functions | |
* @{ | |
*/ | |
/** @addtogroup ADCEx_Exported_Functions_Group1 | |
* @{ | |
*/ | |
/* IO operation functions *****************************************************/ | |
/* ADC calibration */ | |
HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc, uint32_t SingleDiff); | |
uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef* hadc, uint32_t SingleDiff); | |
HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef* hadc, uint32_t SingleDiff, uint32_t CalibrationFactor); | |
/* ADC VrefInt and Temperature sensor functions specific to this STM32 serie */ | |
HAL_StatusTypeDef HAL_ADCEx_EnableVREFINT(void); | |
void HAL_ADCEx_DisableVREFINT(void); | |
HAL_StatusTypeDef HAL_ADCEx_EnableVREFINTTempSensor(void); | |
void HAL_ADCEx_DisableVREFINTTempSensor(void); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /*__STM32L0xx_HAL_ADC_EX_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |