/** | |
****************************************************************************** | |
* @file stm32f3xx_hal_rtc_ex.h | |
* @author MCD Application Team | |
* @brief Header file of RTC HAL Extended module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F3xx_HAL_RTC_EX_H | |
#define __STM32F3xx_HAL_RTC_EX_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f3xx_hal_def.h" | |
/** @addtogroup STM32F3xx_HAL_Driver | |
* @{ | |
*/ | |
/** @defgroup RTCEx RTCEx | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup RTCEx_Exported_Types RTC Extended Exported Types | |
* @{ | |
*/ | |
/** | |
* @brief RTC Tamper structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t Tamper; /*!< Specifies the Tamper Pin. | |
This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */ | |
uint32_t Trigger; /*!< Specifies the Tamper Trigger. | |
This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ | |
uint32_t Filter; /*!< Specifies the RTC Filter Tamper. | |
This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */ | |
uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. | |
This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */ | |
uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . | |
This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ | |
uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . | |
This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */ | |
uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. | |
This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ | |
}RTC_TamperTypeDef; | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup RTCEx_Exported_Constants RTC Extended Exported Constants | |
* @{ | |
*/ | |
/** @defgroup RTCEx_Output_selection_Definitions RTC Extended Output Selection Definition | |
* @{ | |
*/ | |
#define RTC_OUTPUT_DISABLE 0x00000000U | |
#define RTC_OUTPUT_ALARMA RTC_CR_OSEL_0 | |
#define RTC_OUTPUT_ALARMB RTC_CR_OSEL_1 | |
#define RTC_OUTPUT_WAKEUP RTC_CR_OSEL | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Backup_Registers_Definitions RTC Extended Backup Registers Definition | |
* @{ | |
*/ | |
#if RTC_BKP_NUMBER > 0U | |
#define RTC_BKP_DR0 0x00000000U | |
#define RTC_BKP_DR1 0x00000001U | |
#define RTC_BKP_DR2 0x00000002U | |
#define RTC_BKP_DR3 0x00000003U | |
#define RTC_BKP_DR4 0x00000004U | |
#endif /* RTC_BKP_NUMBER > 0U */ | |
#if RTC_BKP_NUMBER > 5U | |
#define RTC_BKP_DR5 0x00000005U | |
#define RTC_BKP_DR6 0x00000006U | |
#define RTC_BKP_DR7 0x00000007U | |
#define RTC_BKP_DR8 0x00000008U | |
#define RTC_BKP_DR9 0x00000009U | |
#define RTC_BKP_DR10 0x0000000AU | |
#define RTC_BKP_DR11 0x0000000BU | |
#define RTC_BKP_DR12 0x0000000CU | |
#define RTC_BKP_DR13 0x0000000DU | |
#define RTC_BKP_DR14 0x0000000EU | |
#define RTC_BKP_DR15 0x0000000FU | |
#endif /* RTC_BKP_NUMBER > 5U */ | |
#if RTC_BKP_NUMBER > 16U | |
#define RTC_BKP_DR16 0x00000010U | |
#define RTC_BKP_DR17 0x00000011U | |
#define RTC_BKP_DR18 0x00000012U | |
#define RTC_BKP_DR19 0x00000013U | |
#endif /* RTC_BKP_NUMBER > 16U */ | |
#if RTC_BKP_NUMBER > 20U | |
#define RTC_BKP_DR20 0x00000014U | |
#define RTC_BKP_DR21 0x00000015U | |
#define RTC_BKP_DR22 0x00000016U | |
#define RTC_BKP_DR23 0x00000017U | |
#define RTC_BKP_DR24 0x00000018U | |
#define RTC_BKP_DR25 0x00000019U | |
#define RTC_BKP_DR26 0x0000001AU | |
#define RTC_BKP_DR27 0x0000001BU | |
#define RTC_BKP_DR28 0x0000001CU | |
#define RTC_BKP_DR29 0x0000001DU | |
#define RTC_BKP_DR30 0x0000001EU | |
#define RTC_BKP_DR31 0x0000001FU | |
#endif /* RTC_BKP_NUMBER > 20U */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC Extended Time Stamp Edges definition | |
* @{ | |
*/ | |
#define RTC_TIMESTAMPEDGE_RISING 0x00000000U | |
#define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_TimeStamp_Pin_Selections RTC Extended TimeStamp Pin Selection | |
* @{ | |
*/ | |
#define RTC_TIMESTAMPPIN_DEFAULT 0x00000000U | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Extended Tamper Pins Definition | |
* @{ | |
*/ | |
#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E | |
#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E | |
#if defined(RTC_TAMPER3_SUPPORT) | |
#define RTC_TAMPER_3 RTC_TAFCR_TAMP3E | |
#endif /* RTC_TAMPER3_SUPPORT */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Extended Tamper Trigger Definition | |
* @{ | |
*/ | |
#define RTC_TAMPERTRIGGER_RISINGEDGE 0x00000000U | |
#define RTC_TAMPERTRIGGER_FALLINGEDGE RTC_TAFCR_TAMP1TRG | |
#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE | |
#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Extended Tamper Filter Definition | |
* @{ | |
*/ | |
#define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ | |
#define RTC_TAMPERFILTER_2SAMPLE RTC_TAFCR_TAMPFLT_0 /*!< Tamper is activated after 2 | |
consecutive samples at the active level */ | |
#define RTC_TAMPERFILTER_4SAMPLE RTC_TAFCR_TAMPFLT_1 /*!< Tamper is activated after 4 | |
consecutive samples at the active level */ | |
#define RTC_TAMPERFILTER_8SAMPLE RTC_TAFCR_TAMPFLT /*!< Tamper is activated after 8 | |
consecutive samples at the active level. */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Extended Tamper Sampling Frequencies Definition | |
* @{ | |
*/ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 32768U */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 RTC_TAFCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 16384U */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 RTC_TAFCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 8192 */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (RTC_TAFCR_TAMPFREQ_0 | RTC_TAFCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 4096 */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 RTC_TAFCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 2048 */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (RTC_TAFCR_TAMPFREQ_0 | RTC_TAFCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 1024 */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (RTC_TAFCR_TAMPFREQ_1 | RTC_TAFCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 512 */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 (RTC_TAFCR_TAMPFREQ_0 | RTC_TAFCR_TAMPFREQ_1 | RTC_TAFCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 256 */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Extended Tamper Pin Precharge Duration Definition | |
* @{ | |
*/ | |
#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before | |
sampling during 1 RTCCLK cycle */ | |
#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK RTC_TAFCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before | |
sampling during 2 RTCCLK cycles */ | |
#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK RTC_TAFCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before | |
sampling during 4 RTCCLK cycles */ | |
#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK (RTC_TAFCR_TAMPPRCH_0 | RTC_TAFCR_TAMPPRCH_1) /*!< Tamper pins are pre-charged before | |
sampling during 8 RTCCLK cycles */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Extended Tamper TimeStampOnTamperDetection Definition | |
* @{ | |
*/ | |
#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */ | |
#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000U /*!< TimeStamp on Tamper Detection event is not saved */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Extended Tamper Pull UP Definition | |
* @{ | |
*/ | |
#define RTC_TAMPER_PULLUP_ENABLE 0x00000000U /*!< Tamper pins are pre-charged before sampling */ | |
#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< Tamper pins are not pre-charged before sampling */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Extended Wakeup Timer Definition | |
* @{ | |
*/ | |
#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000U | |
#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 RTC_CR_WUCKSEL_0 | |
#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 RTC_CR_WUCKSEL_1 | |
#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1) | |
#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS (RTC_CR_WUCKSEL_2) | |
#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2) | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Extended Smooth calib period Definition | |
* @{ | |
*/ | |
#define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000U /*!< If RTCCLK = 32768 Hz, Smooth calibation | |
period is 32s, else 2exp20 RTCCLK seconds */ | |
#define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibation | |
period is 16s, else 2exp19 RTCCLK seconds */ | |
#define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibation | |
period is 8s, else 2exp18 RTCCLK seconds */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Extended Smooth calib Plus pulses Definition | |
* @{ | |
*/ | |
#define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000U /*!< The number of RTCCLK pulses subbstited | |
during a 32-second window = CALM[8:0] */ | |
#define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added | |
during a X -second window = Y - CALM[8:0] | |
with Y = 512U, 256U, 128 when X = 32U, 16U, 8U */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Extended Calib Output selection Definition | |
* @{ | |
*/ | |
#define RTC_CALIBOUTPUT_512HZ 0x00000000U | |
#define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTC Extended Add 1 Second Parameter Definition | |
* @{ | |
*/ | |
#define RTC_SHIFTADD1S_RESET 0x00000000U | |
#define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macro ------------------------------------------------------------*/ | |
/** @defgroup RTCEx_Exported_Macros RTC Extended Exported Macros | |
* @{ | |
*/ | |
/* ---------------------------------WAKEUPTIMER---------------------------------*/ | |
/** @defgroup RTCEx_WakeUp_Timer RTC Extended WakeUp Timer | |
* @{ | |
*/ | |
/** | |
* @brief Enable the RTC WakeUp Timer peripheral. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) | |
/** | |
* @brief Disable the RTC WakeUp Timer peripheral. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) | |
/** | |
* @brief Enable the RTC WakeUpTimer interrupt. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled. | |
* This parameter can be: | |
* @arg RTC_IT_WUT: WakeUpTimer interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) | |
/** | |
* @brief Disable the RTC WakeUpTimer interrupt. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled. | |
* This parameter can be: | |
* @arg RTC_IT_WUT: WakeUpTimer interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) | |
/** | |
* @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check. | |
* This parameter can be: | |
* @arg RTC_IT_WUT: WakeUpTimer interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET) ? SET : RESET) | |
/** | |
* @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check. | |
* This parameter can be: | |
* @arg RTC_IT_WUT: WakeUpTimer interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) | |
/** | |
* @brief Get the selected RTC WakeUpTimer's flag status. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not. | |
* This parameter can be: | |
* @arg RTC_FLAG_WUTF | |
* @arg RTC_FLAG_WUTWF | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET) | |
/** | |
* @brief Clear the RTC Wake Up timer's pending flags. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear. | |
* This parameter can be: | |
* @arg RTC_FLAG_WUTF | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) | |
/* WAKE-UP TIMER EXTI */ | |
/* ------------------ */ | |
/** | |
* @brief Enable interrupt on the RTC WakeUp Timer associated Exti line. | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @brief Disable interrupt on the RTC WakeUp Timer associated Exti line. | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) | |
/** | |
* @brief Enable event on the RTC WakeUp Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @brief Disable event on the RTC WakeUp Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) | |
/** | |
* @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) | |
/** | |
* @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) | |
/** | |
* @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); | |
/** | |
* @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. | |
* This parameter can be: | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); | |
/** | |
* @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not. | |
* @retval Line Status. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @brief Clear the RTC WakeUp Timer associated Exti line flag. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @} | |
*/ | |
/* ---------------------------------TIMESTAMP---------------------------------*/ | |
/** @defgroup RTCEx_Timestamp RTC Extended Timestamp | |
* @{ | |
*/ | |
/** | |
* @brief Enable the RTC TimeStamp peripheral. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) | |
/** | |
* @brief Disable the RTC TimeStamp peripheral. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) | |
/** | |
* @brief Enable the RTC TimeStamp interrupt. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled. | |
* This parameter can be: | |
* @arg RTC_IT_TS: TimeStamp interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) | |
/** | |
* @brief Disable the RTC TimeStamp interrupt. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled. | |
* This parameter can be: | |
* @arg RTC_IT_TS: TimeStamp interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) | |
/** | |
* @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check. | |
* This parameter can be: | |
* @arg RTC_IT_TS: TimeStamp interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET) | |
/** | |
* @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check. | |
* This parameter can be: | |
* @arg RTC_IT_TS: TimeStamp interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) | |
/** | |
* @brief Get the selected RTC TimeStamp's flag status. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not. | |
* This parameter can be: | |
* @arg RTC_FLAG_TSF | |
* @arg RTC_FLAG_TSOVF | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) | |
/** | |
* @brief Clear the RTC Time Stamp's pending flags. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __FLAG__ specifies the RTC Alarm Flag to clear. | |
* This parameter can be: | |
* @arg RTC_FLAG_TSF | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) | |
/** | |
* @} | |
*/ | |
/* ---------------------------------TAMPER------------------------------------*/ | |
/** @defgroup RTCEx_Tamper RTC Extended Tamper | |
* @{ | |
*/ | |
/** | |
* @brief Enable the RTC Tamper1 input detection. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E)) | |
/** | |
* @brief Disable the RTC Tamper1 input detection. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E)) | |
/** | |
* @brief Enable the RTC Tamper2 input detection. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E)) | |
/** | |
* @brief Disable the RTC Tamper2 input detection. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E)) | |
#if defined(RTC_TAMPER3_SUPPORT) | |
/** | |
* @brief Enable the RTC Tamper3 input detection. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP3E)) | |
/** | |
* @brief Disable the RTC Tamper3 input detection. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP3E)) | |
#endif /* RTC_TAMPER3_SUPPORT */ | |
/** | |
* @brief Enable the RTC Tamper interrupt. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled. | |
* This parameter can be any combination of the following values: | |
* @arg RTC_IT_TAMP: Tamper interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAFCR |= (__INTERRUPT__)) | |
/** | |
* @brief Disable the RTC Tamper interrupt. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled. | |
* This parameter can be any combination of the following values: | |
* @arg RTC_IT_TAMP: Tamper interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAFCR &= ~(__INTERRUPT__)) | |
/** | |
* @brief Check whether the specified RTC Tamper interrupt has occurred or not. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __INTERRUPT__ specifies the RTC Tamper interrupt to check. | |
* This parameter can be: | |
* @arg RTC_IT_TAMP1: Tamper1 interrupt | |
* @arg RTC_IT_TAMP2: Tamper2 interrupt | |
* @arg RTC_IT_TAMP3: Tamper3 interrupt (*) | |
* @note (*) RTC_IT_TAMP3 not present on all the devices | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET) | |
/** | |
* @brief Check whether the specified RTC Tamper interrupt has been enabled or not. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check. | |
* This parameter can be: | |
* @arg RTC_IT_TAMP: Tamper interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET) | |
/** | |
* @brief Get the selected RTC Tamper's flag status. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __FLAG__ specifies the RTC Tamper Flag is pending or not. | |
* This parameter can be: | |
* @arg RTC_FLAG_TAMP1F | |
* @arg RTC_FLAG_TAMP2F | |
* @arg RTC_FLAG_TAMP3F (*) | |
* @note (*) RTC_FLAG_TAMP3F not present on all the devices | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) | |
/** | |
* @brief Clear the RTC Tamper's pending flags. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __FLAG__ specifies the RTC Tamper Flag to clear. | |
* This parameter can be: | |
* @arg RTC_FLAG_TAMP1F | |
* @arg RTC_FLAG_TAMP2F | |
* @arg RTC_FLAG_TAMP3F (*) | |
* @note (*) RTC_FLAG_TAMP3F not present on all the devices | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) | |
/** | |
* @} | |
*/ | |
/* --------------------------TAMPER/TIMESTAMP---------------------------------*/ | |
/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Extended Tamper Timestamp EXTI | |
* @{ | |
*/ | |
/* TAMPER TIMESTAMP EXTI */ | |
/* --------------------- */ | |
/** | |
* @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) | |
/** | |
* @brief Enable event on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @brief Disable event on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) | |
/** | |
* @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) | |
/** | |
* @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) | |
/** | |
* @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); | |
/** | |
* @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
* This parameter can be: | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); | |
/** | |
* @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not. | |
* @retval Line Status. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @brief Clear the RTC Tamper and Timestamp associated Exti line flag. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @} | |
*/ | |
/* ------------------------------Calibration----------------------------------*/ | |
/** @defgroup RTCEx_Calibration RTC Extended Calibration | |
* @{ | |
*/ | |
/** | |
* @brief Enable the RTC calibration output. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) | |
/** | |
* @brief Disable the calibration output. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) | |
/** | |
* @brief Enable the clock reference detection. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) | |
/** | |
* @brief Disable the clock reference detection. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) | |
/** | |
* @brief Get the selected RTC shift operation's flag status. | |
* @param __HANDLE__ specifies the RTC handle. | |
* @param __FLAG__ specifies the RTC shift operation Flag is pending or not. | |
* This parameter can be: | |
* @arg RTC_FLAG_SHPF | |
* @retval None | |
*/ | |
#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported functions --------------------------------------------------------*/ | |
/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions | |
* @{ | |
*/ | |
/* RTC TimeStamp and Tamper functions *****************************************/ | |
/** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp and Tamper functions | |
* @{ | |
*/ | |
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); | |
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); | |
HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); | |
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); | |
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); | |
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); | |
void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc); | |
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); | |
void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); | |
void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc); | |
void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
/** | |
* @} | |
*/ | |
/* RTC Wake-up functions ******************************************************/ | |
/** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions | |
* @{ | |
*/ | |
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); | |
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); | |
uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); | |
uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); | |
void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); | |
void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
/** | |
* @} | |
*/ | |
/* Extended Control functions ************************************************/ | |
/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions | |
* @{ | |
*/ | |
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); | |
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); | |
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); | |
HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); | |
HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); | |
HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); | |
/** | |
* @} | |
*/ | |
/* Extended RTC features functions *******************************************/ | |
/** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions | |
* @{ | |
*/ | |
void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private types -------------------------------------------------------------*/ | |
/* Private variables ---------------------------------------------------------*/ | |
/* Private constants ---------------------------------------------------------*/ | |
/* Private macros ------------------------------------------------------------*/ | |
/** @defgroup RTCEx_Private_Macros RTCEx Private Macros | |
* @{ | |
*/ | |
/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters | |
* @{ | |
*/ | |
#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \ | |
((OUTPUT) == RTC_OUTPUT_ALARMA) || \ | |
((OUTPUT) == RTC_OUTPUT_ALARMB) || \ | |
((OUTPUT) == RTC_OUTPUT_WAKEUP)) | |
#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER) | |
#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ | |
((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) | |
#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & 0xFFFFFFD6U) == 0x00U) && ((TAMPER) != (uint32_t)RESET)) | |
#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT)) | |
#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ | |
((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ | |
((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ | |
((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL)) | |
#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \ | |
((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \ | |
((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \ | |
((FILTER) == RTC_TAMPERFILTER_8SAMPLE)) | |
#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) | |
#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ | |
((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ | |
((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ | |
((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) | |
#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ | |
((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) | |
#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \ | |
((STATE) == RTC_TAMPER_PULLUP_DISABLE)) | |
#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ | |
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ | |
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ | |
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ | |
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ | |
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) | |
#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFFU) | |
#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ | |
((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ | |
((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) | |
#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ | |
((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) | |
#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FFU) | |
#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ | |
((SEL) == RTC_SHIFTADD1S_SET)) | |
#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFFU) | |
#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ | |
((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32F3xx_HAL_RTC_EX_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |